dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
40,623 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

165 Commits

Author SHA1 Message Date
Daniel Agar 414f9f81d9
move fake GPS to standalone module 2021-02-20 14:13:36 -05:00
Daniel Agar ab0d0fd0be
uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar fb2a199621 delete unmaintaned mkblctrl driver 2021-02-14 10:38:15 +01:00
Daniel Agar a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00
Daniel Agar 8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar 78dff6adcb boards: add CONSTRAINED_MEMORY build option 
- currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed
 - limits number of EKF2 multi instances to 2.
 - enabled on all cortex m4 boards
 2021-02-01 08:56:22 +01:00
Daniel Agar 1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Matthias Grob 7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
David Sidrane 22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane 6e9f50f48e omnibus_f4sd: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
David Sidrane 4bc698e8e3 omnibus_f4sd: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 9a19340dc3 omnibus_f4sd Updates for NuttX 9.1.0- 
omnibus_f4sd: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
SalimTerryLi c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
Daniel Agar e3d31a881e boards: NuttX disable posix message queues 2020-07-17 17:00:21 -04:00
Daniel Agar 6f6efd60b7 boards: centralize optional external I2C sensor start 
- configured with new parameter SENS_EXT_I2C_PRB
 2020-06-10 09:04:13 -04:00
Daniel Agar 5e7d2e830d boards: delete old board.h boilerplate 2020-06-08 19:10:33 -04:00
Daniel Agar 04113b4d57 commander: changes when USB connected 
- skip avionics rail voltage check when USB connected
 - skip forced reboot on USB disconnect if circuit breaker set
 - avionics voltage preflight check don't silently fail if system_power unavailble
     - explicitly set supply check circuit breaker (CBRK_SUPPLY_CHK)
 2020-05-06 13:53:54 -04:00
Daniel Agar 746a8f5cf9 commander: reboot/shutdown usability fixes 
- always check with state machine before reboot/shutdown
 - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button)
 - px4_shutdown_request add optional delay and always execute from HPWORK
 - px4_shutdown_request split out px4_reboot_request
 2020-05-06 13:53:54 -04:00
Daniel Agar 8d0c92003a boards: remove all CONFIG_NXFONTS_DISABLE* 2020-05-01 20:59:57 -04:00
Daniel Agar 06478d9997 delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config 2020-04-15 23:33:41 -04:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Daniel Agar 66eacd24bc
px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins 
- increase stack sizes to run cleanly under stackcheck
     - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford
 - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)
 2020-04-11 21:16:10 -04:00
Daniel Agar ad559a66a1 examples: add simple work_item example module 2020-04-06 09:43:55 -04:00
Daniel Agar 40b1043e12 NuttX boards minor lpwork and init stack increases 2020-04-02 23:39:17 -04:00
Daniel Agar 15332a7e56 boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15 2020-04-01 16:17:14 -04:00
Daniel Agar baa50a1985 boards: omnibus/f4sd add board_dma_map.h 2020-04-01 10:42:09 +02:00
Daniel Agar ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
Beat Küng cc6ae7ad41 fix omnibus/f4sd: bmp280 start 2020-03-30 15:52:41 -04:00
Beat Küng fc3b497b41 omnibus/f4sd: switch over mpu6000 driver 
I'm seeing 'mpu6000: FIFO empty: 49 events' increasing, but that is
epxected as there's no DRDY.
 2020-03-30 15:52:41 -04:00
Daniel Agar 44bec269b0 boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15 2020-03-25 17:59:22 -04:00
Beat Küng b156fe5787 boards: remove deprecated SPI + I2C defines from board_config.h 
chip-selects are deselected in stm32_spiinitialize()
 2020-03-24 09:46:20 -04:00
Beat Küng 2f3174abb0 refactor icm20602: use driver base class 2020-03-24 09:46:20 -04:00
Daniel Agar 8738c26426
boards: enable NuttX SPI DMA buffers 
- update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers
 - remove explicit DMA buffer allocations from new IMU drivers
 - restore original BOARD_DMA_ALLOC_POOL_SIZE
 - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing
 2020-03-22 19:24:26 -04:00
Beat Küng 8f3ba81c4a refactor atxxxx: use driver base class 
and increase update rate to 20Hz
 2020-03-17 23:31:17 -04:00
Daniel Agar 0ce9e113ff boards: stm32f4/f7 enable SPI_DMATHRESHOLD=32 2020-03-11 22:08:37 -04:00
Daniel Agar f9794e99f8
move hover_thrust_estimator to new module (mc_hover_thrust_estimator) 
* MC_HTE: unitialize with hover_thrust parameter
* MC_HTE: constrain hover thrust setter between 0.1 and 0.9
* MC_HTE: integrate with land detector and velocity controller
* MCHoverThrustEstimator: Always publish an estimate even when not fusing measurements. This is required as the land detector and the position controller need to receive a hover thrust value.

* MC_HTE: use altitude agl threshold to start the estimator
local_position.z is relative to the origin of the EKF while dist_bottom
is above ground

Co-authored-by: bresch <brescianimathieu@gmail.com>
 2020-03-11 21:20:54 -04:00
Daniel Agar 505afc6063 boards: increase LPWORKSTACKSIZE 1536 -> 1600 2020-03-10 12:53:01 -04:00
Beat Küng 335623e11d SPI config: use enum to specify bus 2020-03-10 10:11:43 -04:00
Beat Küng 37846a177c omnibusf4sd: disable landing_target_estimator 
to reduce FLASH size
 2020-03-10 10:11:43 -04:00
Beat Küng 1851665fab boards: add new spi+i2c config 
Chip-select and SPI initialization uses the new config, whereas the drivers
still use the existing defines.

The configuration in board_config.h can be removed after all drivers are
updated.
 2020-03-10 10:11:43 -04:00
Beat Küng 977b80cee9 omnibus: enable DMA on SPI2 (SD Card) 
Reduces CPU load by ~10%, and allows to comfortably run the rate loop at
2kHz.
 2020-03-09 12:47:43 +01:00
Julian Kent 4bf34a75db Indicate that omnibus_f4sd is constrained in flash 2020-03-09 09:51:49 +01:00
Daniel Agar 4698a09b98 delete unmaintained outback challenge (OBC) bottle drop example 2020-03-05 14:09:31 -05:00
Beat Küng 77b854b7c3 omnibus: enable SPI dma + use new ICM-20602 driver (disabled DLPF) 2020-02-25 09:59:52 +01:00
Beat Küng d74d094940 nuttx configs: disable nuttx timers which are used for PWM output 
These are not required, and to be consistent we enforce disabling them now.
 2020-02-13 03:49:16 -08:00
Beat Küng ba4be76bcc omnibus/f4sd: use hw description methods for timer configuration 2020-02-13 03:49:16 -08:00
Beat Küng 62b4f3487a io timer: remove some fields from io_timers_t and split out channel indexes 
- reduces amount of board configuration required
- removes the cyclic dependency between io_timers_t and timer_io_channels_t

Fixes a bug in the fmuk66-v3 config: the 2. timer has 3 channels associated
not 2.
Fixes a bug in the modelai config: the 2. timer has 4 channels associated.
 2020-02-13 03:49:16 -08:00
Daniel Agar dc05ceaad2
create temperature_compensation module 
- this is a new module for temperature compensation that consolidates the functionality previously handled in the sensors module (calculating runtime thermal corrections) and the events module (online thermal calibration)
 - by collecting this functionality into a single module we can optionally disable it on systems where it's not used and save some flash (if disabled at build time) or memory (disabled at run time)
 2020-01-20 21:42:42 -05:00
Daniel Agar bc182e94e6
sensors split rc_update into new standalone module 2019-11-24 13:25:11 -05:00
Daniel Agar 8c38176d77 boards: alphabetize and sync common drivers and modules 2019-11-21 18:56:24 -05:00
Daniel Agar 84fe64b1c2
create new multicopter rate controller module (mc_rate_control) split out of mc_att_control 2019-11-19 17:03:11 -05:00
Daniel Agar 99aae8b891 NuttX use toolchain math.h and avoid empty drivers/Kconfig 2019-11-16 11:43:42 +01:00
David Sidrane 8b33d1fcda omnibus:f4sd BSP Updated to NuttX 8.1+ 2019-11-16 11:43:42 +01:00
Daniel Agar 668984b6b0 boards: start adc in rc.board_sensors 2019-11-11 17:08:24 -05:00
Beat Küng 3b7c1b4ff1 src/drivers/boards: move to platforms/nuttx/src/px4/common 2019-10-30 11:48:47 +01:00
Beat Küng b30171ba8d board_common.h: move under platforms/common 
Also move board_determine_hw_info and board_gpio_init under platforms/nuttx
 2019-10-30 11:48:47 +01:00
Beat Küng 3198610f85 src/platforms: move all headers to platforms/common/include/px4_platform_common 
and remove the px4_ prefix, except for px4_config.h.

command to update includes:
for k in app.h atomic.h cli.h console_buffer.h defines.h getopt.h i2c.h init.h log.h micro_hal.h module.h module_params.h param.h param_macros.h posix.h sem.h sem.hpp shmem.h shutdown.h tasks.h time.h workqueue.h; do for i in $(grep -rl 'include <px4_'$k src platforms boards); do sed -i 's/#include <px4_'$k'/#include <px4_platform_common\/'$k/ $i; done; done
for in $(grep -rl 'include <px4_config.h' src platforms boards); do sed -i 's/#include <px4_config.h/#include <px4_platform_common\/px4_config.h'/ $i; done

Transitional headers for submodules are added (px4_{defines,log,time}.h)
 2019-10-30 11:48:47 +01:00
Igor Mišić f4ee9141cb DShot: updated driver to use NuttX DMA functions (#13233) 2019-10-25 09:49:03 +02:00
Daniel Agar 6a0f5249f8
sensors: split out analog battery handling to new standalone battery_status module 2019-10-21 13:40:23 -04:00
Beat Küng ac82c5114b omnibusf4sd: add dshot timer config 2019-10-11 08:14:17 +02:00
Daniel Agar 26364d44c9
px4_work_queue: command line status output and shutdown empty queues 
* adds a work_queue systemcmd that will bring a tree view of all active work queues and work items
 * WorkQueues now track attached WorkItems and will shutdown when the last WorkItem is detached
 2019-10-02 12:23:17 -04:00
garfieldG bbb96cbd0c Mavlink startup script per board 
-moved rc.mavlink to the boards optional rc additions (now it's called rc.board_mavlink) to handle board specific mavlink needs (mavlink over usb, ethernet, additional streams, etc.)
-mavlink module will be responsible to usb defaults, therefore less args are needed to be passed to mavlink module if one wants to use mavlink over usb.
-the way to check if connection is usb is by it's designated variable and not by config mode.
 2019-09-29 10:46:08 -04:00
Daniel Agar 0486d69240 delete obsolete segway example 2019-09-28 15:05:50 -04:00
BazookaJoe1900 6ab5c2170e remove unused pca8574 and oreoled drivers 2019-09-04 08:05:08 -07:00
Beat Küng f3fccf53f6 src/drivers/{kinetis,stm32}: move to arch-specific directories 2019-08-30 07:59:44 +02:00
Beat Küng 1cb6c36a00 adc: refactor into arch-specific directories 2019-08-30 07:59:44 +02:00
Beat Küng ab43a83bed platform: restructure (NuttX) architecture-specific code 
updated: tone_alarm, px4io_serial, px4_micro_hal
 2019-08-30 07:59:44 +02:00
Silvan Fuhrer d129fcccd5 Omnibus: take out local_position_estimator from build as was out of flash after ecl update for airspeed selection module 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2019-08-09 10:55:05 +02:00
Silvan Fuhrer cedf14e2ba Airspeed Selector: repurpose wind estimator into an airspeed (selection, validation) module. 
This new airspeed module does:
  -runns an airspeed validator for every airspeed sensor present, which checks measurement validity and estimates an airspeed scale
  -selects another airspeed sensor if for the current one a failure is detected
  -estimates airspeed with groundspeed-windspeed if no valid airspeed sensor is present
  -outputs airspeed_validated topic

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2019-08-09 10:55:05 +02:00
Daniel Agar 0955fd2d58
NuttX boards reduce CONFIG_NFILE_DESCRIPTORS 54 -> 20 2019-08-07 21:23:27 -04:00
Daniel Agar 5421ef5535 NuttX increase HPWORK and LPWORK stack by 256 bytes 2019-08-06 23:15:07 -04:00
Daniel Agar 9d701a077d
NuttX reduce stack for interrupts, HPWORK, LPWORK 2019-08-06 11:00:55 -04:00
Beat Küng a3c920db7d board_defaults: remove unnecessary 'set MIXER_AUX none' 
On all of these boards '$USE_IO = no' will hold.
 2019-07-16 08:09:22 +02:00
Timothy Scott 2ed00c9cb6 Rover: Rewrote gnd_pos_control and removed gnd_att_control (#12239) 2019-07-11 09:39:13 -04:00
Daniel Agar dc10a68539 NuttX and apps update 7.29 2019-07-10 12:58:35 -04:00
Daniel Agar 321c2c0392 boards don't use px4_add_library for drivers_board 
- this prevents low level board support from using PX4 logging, uORB, etc
 2019-07-09 19:09:47 -04:00
Daniel Agar 15d1543f95 create systemcmds/i2cdetect tool to scan i2c bus 2019-07-06 10:28:16 -04:00
Beat Küng ab0466eddf omnibus: enable dmesg buffer (3kb) 
without LPE running, we have about 17.6 kb more free RAM.
 2019-06-06 11:11:44 -04:00
Beat Küng 73102dc3c4 SYS_MC_EST_GROUP: add q estimator only option and activate on omnibus 2019-06-06 11:11:44 -04:00
Beat Küng 1321f96b59 omnibus rc.board_defaults: remove flash-based params transition logic 2019-06-06 11:11:44 -04:00
Daniel Agar f85c15e247 board common create generic dma allocator (from fat_dma_alloc) 2019-05-30 19:31:40 -04:00
Mohammed Kabir b334b75886 Move optical flow drivers to own subdirectory 2019-05-28 23:23:38 -04:00
Beat Küng 914a9b78b6 new airframe for sih, HIL_STATE_QUATERION sent through MAVLink 2019-04-12 09:25:07 +02:00
Beat Küng d9f8e37288 omnibus: use default clock rate of 20 MHz for SD card (CONFIG_MMCSD_SPICLOCK) 
With 24 MHz accesses to the SD card were unreliable. And the chance of
failure recently got worse, so that logging became impossible.
 2019-04-08 10:44:30 +02:00
Daniel Agar 5e6bfe1ad8
vscode updates 
* working debugging (one click build and debug)
   * SITL jmavsim
   * SITL gazebo
   * jlink px4_fmu-v{2-5}
 * improved syntax highlighting
   * GNU linker files
   * ROS message files msg/*.msg
   * jinja2 template files
 * fixed intellisense support
 2019-03-22 20:55:39 -04:00
Daniel Agar be93dd1c5d omnibus_f4sd nsh compress defconfig 2019-03-21 08:41:01 -04:00
Hamish Willee 257b90958f Correct links to example docs 2019-03-15 08:05:54 +01:00
David Sidrane edd9f91a19 board:Set larger stack margin 2019-03-01 23:45:48 -05:00
Beat Küng 717e52fa57 osd: rename driver to atxxxx 2019-02-19 10:55:55 +01:00
DanielePettenuzzo c3f9294b49 omnibus: initial osd driver for omnibus board 2019-02-19 10:55:55 +01:00
Daniel Agar 739a02022b position_estimator_inav: move to examples (start deprecation) 2019-01-27 22:15:39 +01:00
David Sidrane b478719079 omnibus_f4sd:Fully remove console 2019-01-25 06:32:37 -08:00
David Sidrane 3032643a0c omnibus_f4sd: Inital commit NuttX 7.27+ 2019-01-25 06:32:37 -08:00
David Sidrane 8f308efa88 upstram NuttX CONFIG_EXAMPLES_NSH_CXXINITIALIZE->CONFIG_SYSTEM_NSH_CXXINITIALIZE 2019-01-25 06:32:37 -08:00
Daniel Agar 2ffb49b734 delete px4_includes.h header and update boards/ to use syslog 2019-01-23 18:25:18 -05:00
Daniel Agar 67e5986c9b delete obsolete examples/subscriber 2019-01-23 18:25:18 -05:00
Daniel Agar 693ee4808a delete obsolete examples/publisher 2019-01-23 18:25:18 -05:00