dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
39,696 Commits 514 Branches 136 Tags 601 MiB
Commit Graph

196 Commits

Author SHA1 Message Date
Daniel Agar df44df2df6 delete systemcmds/esc_calib 
- this is redundant with commander esc_calibration
 2022-01-10 09:51:11 -05:00
Daniel Agar 6d0339ba0c I2CSPIDriverBase: sensor start failure ERROR if internal, WARN if external 2021-12-28 11:05:35 -05:00
Julian Oes 9686c81f7d boards: enable flow control on CDCACM 
This enables flow control on CDCACM for the NuttX boards which fixes a
problem where HITL would stall.

The stall could happen if the hardware would be a bit too slow in
keeping up with the incoming messages. Often, this happened on arming
because the logger would take some time to log all parameters right at
the beginning.

The stall would then not recover due to NuttX bug where the rx interrupt
would not be restored correctly and instead only a slower watchdog would
release the next read. This watchdog takes 200ms which means it's hard
to impossible to get out of the situation without restarting sim and/or
PX4.  For more information about the issue, see:
apache/incubator-nuttx#3633

As a workaround, until that bug is fixed, and because it makes sense
anyway, I propose to enable FLOWCONTROL for the serial via USB.
 2021-12-21 08:01:38 +01:00
Daniel Agar 8185e2a384 boards: board_app_initialize() don't return early on failure 
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
 2021-12-09 20:41:54 -05:00
Daniel Agar 3160e7a3cd Jenkins: run calib_udelay on test rack 2021-12-05 19:42:10 -05:00
Daniel Agar a2064cceff boards: enable early MPU reset on any board potentially not using the PX4 bootloader 2021-12-01 20:13:41 -05:00
David Sidrane 8172a561ca cuav_x7pro nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 947162f998 cuav_nora nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 63bedd8e4a cuav_can-gps-v1 nsh:Remove CONFIG_RAMTRON_WRITEWAIT 2021-11-26 19:27:29 -05:00
David Sidrane 83885b0304 cuav_x7pro:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32 2021-11-24 09:46:23 -05:00
David Sidrane 48b617ee5e cuav_nora:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32 2021-11-24 09:46:23 -05:00
Beat Küng 4c03def6e9 boards: add CONTROL_ALLOCATOR + ACTUATOR_TEST 2021-11-23 12:40:22 -05:00
Daniel Agar f5d9b01f5c
NuttX build in place 
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
 2021-11-15 18:47:38 -05:00
Daniel Agar 2d816e0b3e [WIP] manual_control selector hacks 2021-11-09 16:05:25 +01:00
Daniel Agar a8c3bcca32 boards: disable CONFIG_STM32H7_SPI_DMATHRESHOLD 2021-11-08 19:20:47 -05:00
David Sidrane 38e2e6a01f
Use NuttX MPU Reset (#18283) 
* NuttX with MPU reset backports

* Use NuttX MPU reset
 2021-10-25 18:05:31 -04:00
bresch 6ec9ab11f2 add fw auto-tune module to board configs 2021-10-25 13:41:31 +02:00
Daniel Agar 19952768fb boards: try to keep test boards in sync 2021-10-21 15:59:15 -04:00
Daniel Agar f1016dc32c boards: add systemcmds/topic_listener to CAN nodes 2021-10-21 14:06:11 -04:00
Daniel Agar cb6b1bd427 boards: delete unused test and debug variants 2021-10-07 10:09:01 -04:00
Peter van der Perk ed5fee1a72 Backport #18311 mc atune 2021-10-07 10:09:01 -04:00
Peter van der Perk 454c907b7d Kconfig backport #18327 mag_bias 2021-10-07 10:09:01 -04:00
Peter van der Perk 36191e649a Kconfig backport #18289 and other flash size fixes 2021-10-07 10:09:01 -04:00
Peter van der Perk 6a1675ac28 Backport #17864 to px4board config 2021-10-07 10:09:01 -04:00
Peter van der Perk 33fd65e5fe [Kconfig] Fix regressions found by bloaty and cleanup unused cmake 2021-10-07 10:09:01 -04:00
Peter van der Perk 1eb9a77a9b [Kconfig] Added missing sensor drivers 2021-10-07 10:09:01 -04:00
Peter van der Perk 603d0c594d [Kconfig] fix boards configs 2021-10-07 10:09:01 -04:00
Peter van der Perk efc91d2b69 [Kconfig] Fixed inclusion of microbench bydefault when TESTING was enabled 
Added full optimization option
 2021-10-07 10:09:01 -04:00
Peter van der Perk a1247d6bcf [Kconfig] Backport cmake config changes 2021-10-07 10:09:01 -04:00
Peter van der Perk cc752f11df [Kconfig] python script doesn't remove delta, thus we've to manually add remove deltas 2021-10-07 10:09:01 -04:00
Peter van der Perk b3e799e277 [Kconfig] Add all distance sensors 2021-10-07 10:09:01 -04:00
Peter van der Perk b44c0eb434 [Kconfig] FMUv4 CI fixes 2021-10-07 10:09:01 -04:00
Peter van der Perk 21e6547ac7 [Kconfig] Toolchain & platform fixes, SITL still broken 2021-10-07 10:09:01 -04:00
Peter van der Perk c2ad07b983 [Kconfig] Don't inherit kconfig when bootloader (and canbootloader) 2021-10-07 10:09:01 -04:00
Peter van der Perk 6af0477733 [Kconfig] Gnerate px4board from old cmake 
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
 2021-10-07 10:09:01 -04:00
Peter van der Perk 815617e670 Added common options for sensor drivers 
uavcan_board_identity check for existance
Added kconfig for compiler definitions
 2021-10-07 10:09:01 -04:00
Peter van der Perk 82888d3320 [Kconfig] Merge/diff fixes and added some FMUv5 targets 2021-10-07 10:09:01 -04:00
Daniel Agar 51758bd7e6
boards: delete unused variants 2021-10-05 23:14:04 -04:00
Daniel Agar 3570e5a4f0
boards: cuav_nora_test disable attitude_estimator_q to save flash 2021-10-05 20:43:43 -04:00
Daniel Agar c271a9e3e6 add sd_stress to all boards and run on test rack 2021-10-04 17:38:31 -04:00
Daniel Agar 6d78054f50
mavlink USB auto start/stop on boards with VBUS 
- no longer start sercon or mavlink usb by default
 - on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
 - the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
 - skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
 2021-10-03 15:32:54 -04:00
bresch 1443f773da mbe: add module to targets 2021-10-02 21:25:21 -04:00
bresch 5874b1f87c mc atune: add module to all targets 
- adjust flash constrianed targets to fit
 2021-10-02 18:12:05 -04:00
Beat Küng ce747fac62 cuav/x7pro: disable modules to reduce flash 2021-09-11 14:08:41 -04:00
Beat Küng 3e899564d4 cuav/nora: disable some modules to reduce flash 2021-09-11 14:08:41 -04:00
Beat Küng a8e75d174c boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS 2021-09-08 16:10:24 -04:00
Daniel Agar 40e5477edb NuttX boards fix mkfatfs and rcS logic 2021-09-01 15:16:00 -04:00
Daniel Agar 9e0fa8e82b boards: set SENS_TEMP_ID defaults 2021-09-01 15:16:00 -04:00
Daniel Agar c700ffff92 boards: CUAV H7 boards clear MPU early in board init 
- needed if the bootloader configures the memory protection unit (MPU)
 2021-09-01 08:53:05 +02:00
Daniel Agar 4c401b070e
boards: cuav_can-gps-v1 delete unused debug variant 2021-08-18 17:40:33 -04:00