Daniel Agar
daa925137c
boards: move default battery calibration defines to parameter defaults
2022-01-10 09:49:36 -05:00
Daniel Agar
e835a7c4ea
boards: enable readline history and tab completion on newer boards
2022-01-03 10:44:32 -05:00
Julian Oes
9686c81f7d
boards: enable flow control on CDCACM
...
This enables flow control on CDCACM for the NuttX boards which fixes a
problem where HITL would stall.
The stall could happen if the hardware would be a bit too slow in
keeping up with the incoming messages. Often, this happened on arming
because the logger would take some time to log all parameters right at
the beginning.
The stall would then not recover due to NuttX bug where the rx interrupt
would not be restored correctly and instead only a slower watchdog would
release the next read. This watchdog takes 200ms which means it's hard
to impossible to get out of the situation without restarting sim and/or
PX4. For more information about the issue, see:
apache/incubator-nuttx#3633
As a workaround, until that bug is fixed, and because it makes sense
anyway, I propose to enable FLOWCONTROL for the serial via USB.
2021-12-21 08:01:38 +01:00
Daniel Agar
8185e2a384
boards: board_app_initialize() don't return early on failure
...
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
2021-12-09 20:41:54 -05:00
Daniel Agar
a2064cceff
boards: enable early MPU reset on any board potentially not using the PX4 bootloader
2021-12-01 20:13:41 -05:00
David Sidrane
76585409fa
durandal rev 1 has bmi088->icm20602
2021-11-29 21:59:30 -05:00
David Sidrane
ddc73b4647
holybro_durandal-v1 nsh:Remove CONFIG_RAMTRON_WRITEWAIT
2021-11-26 19:27:29 -05:00
David Sidrane
c4ccde51df
holybro_durandal-v1:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32
2021-11-24 09:46:23 -05:00
Beat Küng
4c03def6e9
boards: add CONTROL_ALLOCATOR + ACTUATOR_TEST
2021-11-23 12:40:22 -05:00
Daniel Agar
f5d9b01f5c
NuttX build in place
...
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
- slightly faster skipping necessary copying (depending on system)
- allows debugging in place
- easier to work directly in NuttX following official documentation
- simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
- the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
- also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
2021-11-15 18:47:38 -05:00
Daniel Agar
2d816e0b3e
[WIP] manual_control selector hacks
2021-11-09 16:05:25 +01:00
Daniel Agar
a8c3bcca32
boards: disable CONFIG_STM32H7_SPI_DMATHRESHOLD
2021-11-08 19:20:47 -05:00
David Sidrane
38e2e6a01f
Use NuttX MPU Reset ( #18283 )
...
* NuttX with MPU reset backports
* Use NuttX MPU reset
2021-10-25 18:05:31 -04:00
Daniel Agar
a548c94230
boards: holybro_durandal-v1_default disable modules to save flash
2021-10-25 13:41:31 +02:00
bresch
6ec9ab11f2
add fw auto-tune module to board configs
2021-10-25 13:41:31 +02:00
Beat Küng
d9bf03b2dc
holybro/durandal-v1: add capture pins to list of pwm pins
2021-10-18 18:45:19 -04:00
Daniel Agar
cb6b1bd427
boards: delete unused test and debug variants
2021-10-07 10:09:01 -04:00
Peter van der Perk
ed5fee1a72
Backport #18311 mc atune
2021-10-07 10:09:01 -04:00
Peter van der Perk
454c907b7d
Kconfig backport #18327 mag_bias
2021-10-07 10:09:01 -04:00
Peter van der Perk
36191e649a
Kconfig backport #18289 and other flash size fixes
2021-10-07 10:09:01 -04:00
Peter van der Perk
6a1675ac28
Backport #17864 to px4board config
2021-10-07 10:09:01 -04:00
Peter van der Perk
f7803fb686
[Kconfig] Bloaty 2nd pass
2021-10-07 10:09:01 -04:00
Peter van der Perk
33fd65e5fe
[Kconfig] Fix regressions found by bloaty and cleanup unused cmake
2021-10-07 10:09:01 -04:00
Peter van der Perk
892d673b45
[Kconfig] fix flash overflow test builds
2021-10-07 10:09:01 -04:00
Peter van der Perk
efc91d2b69
[Kconfig] Fixed inclusion of microbench bydefault when TESTING was enabled
...
Added full optimization option
2021-10-07 10:09:01 -04:00
Peter van der Perk
b3e799e277
[Kconfig] Add all distance sensors
2021-10-07 10:09:01 -04:00
Peter van der Perk
21e6547ac7
[Kconfig] Toolchain & platform fixes, SITL still broken
2021-10-07 10:09:01 -04:00
Peter van der Perk
6af0477733
[Kconfig] Gnerate px4board from old cmake
...
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
2021-10-07 10:09:01 -04:00
Daniel Agar
bbfaa4694c
boards: cleanup serial RX DMA hrt_call_every
...
- remove ts_to_abstime dependency
2021-10-06 14:39:59 -04:00
Daniel Agar
51758bd7e6
boards: delete unused variants
2021-10-05 23:14:04 -04:00
Daniel Agar
c271a9e3e6
add sd_stress to all boards and run on test rack
2021-10-04 17:38:31 -04:00
Daniel Agar
6d78054f50
mavlink USB auto start/stop on boards with VBUS
...
- no longer start sercon or mavlink usb by default
- on USB connection (VBUS) monitor serial USB at low rate and start Mavlink if there's a HEARTBEAT or nshterm on 3 consecutive carriage returns
- the mavlink USB instance is automatically stopped and serdis executed if USB is disconnected
- skipping Mavlink USB (and sercon) saves a considerable amount of memory on older boards
2021-10-03 15:32:54 -04:00
bresch
1443f773da
mbe: add module to targets
2021-10-02 21:25:21 -04:00
bresch
5874b1f87c
mc atune: add module to all targets
...
- adjust flash constrianed targets to fit
2021-10-02 18:12:05 -04:00
Beat Küng
c49e78cbac
holybro/durandal-v1: disable modules to reduce flash
2021-09-11 14:08:41 -04:00
Beat Küng
c5c80e31b6
boards: remove DIRECT_INPUT_TIMER_CHANNELS from board_config.h
2021-09-08 16:10:24 -04:00
Beat Küng
a8e75d174c
boards: remove BOARD_HAS_PWM and use DIRECT_PWM_OUTPUT_CHANNELS
2021-09-08 16:10:24 -04:00
Daniel Agar
40e5477edb
NuttX boards fix mkfatfs and rcS logic
2021-09-01 15:16:00 -04:00
Daniel Agar
f856b89723
boards: Holybro H7 boards clear MPU early in board init
...
- needed if the bootloader configures the memory protection unit (MPU)
2021-09-01 08:53:05 +02:00
David Sidrane
bb913ae11a
system_load:Track Dynamic PID hash
2021-08-13 14:22:00 -04:00
David Sidrane
55bf2c7610
holybro_durandal-v1: Update bootloader defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
b45e0dd872
holybro_durandal-v1: Update nsh defconfig NuttX 10.1.0+
2021-08-13 14:22:00 -04:00
David Sidrane
ec61512cdf
NuttX inits null console
2021-08-13 14:22:00 -04:00
Beat Küng
0e1f3a2d62
px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name
2021-08-03 10:36:25 +02:00
Kirill Shilov
e13884410b
heater: added support of inverted IMU heat controller output
2021-07-20 10:37:53 -04:00
Daniel Agar
774ad80ba0
systemcmds/tests: split out microbenchmarks and remove obsolete tests
...
- reorganize Jenkins HIL tests
2021-07-18 18:02:33 -04:00
David Sidrane
05bdef867d
Track NuttX syslog change
2021-06-16 17:07:47 +02:00
David Sidrane
62fd132047
boards:Use inttypes
...
nxp_ucans32k146:Fix constant
spracing_h7extreme:Use inttypes
2021-06-16 17:07:47 +02:00
echoG
6bc09138c1
Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library
2021-06-09 12:17:45 -04:00
David Sidrane
32e92ba817
Revert:Pull downs - bad levels cause motor spins
2021-06-01 15:18:47 -04:00
Daniel Agar
51f738e54c
boards: bootloader.cmake trivial whitespace cleanup
2021-05-28 23:56:20 -04:00
Jukka Laitinen
071eaef884
Adjust paths to bootloader include files for boards
...
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2021-05-26 12:57:37 -07:00
Daniel Agar
c3884b5bc1
fake_imu (formally fake_gyro) updates for testing gyro filtering
...
- fake_imu now publishes sine sweeps over 10 seconds
- accel is also published so that fake IMU can be selected when the only option
2021-05-17 20:26:25 -04:00
David Sidrane
21cf26a69f
holybro_durandal-v1: Disable OTG_ID_GPIO
2021-05-05 20:48:06 +02:00
David Sidrane
4c8dca738c
holybro_durandal-v1: Initalize PWM as input with Pull Downs
2021-05-05 20:48:06 +02:00
Daniel Agar
58b40fbbb9
boards: move testing to dedicated test variants
2021-04-14 09:21:31 +02:00
Daniel Agar
ad934b4911
icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass)
...
- include icm20948 on most boards by default
- create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
2021-04-04 21:18:16 -04:00
David Sidrane
f63f1f3969
holybro durandal-v1:Add remaining SRAM4 & DTCM to heap
2021-04-03 14:13:23 -04:00
David Sidrane
2fcdadfbd1
holybro_durandal-v1:Enable UAVCAN
2021-04-03 12:47:20 +02:00
Daniel Agar
6874e9fba0
boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default
...
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
2021-03-30 09:23:43 -04:00
Daniel Agar
631d1647d3
boards: minimize unnecessary differences in default variants
2021-03-28 14:46:47 -04:00
Daniel Agar
e77bffe582
boards: STM32H7 remove CONFIG_MM_REGIONS=3
2021-03-26 17:40:44 -04:00
David Sidrane
4eabee00d6
holybro durandal-v1:Properly configure BDMA
2021-03-23 05:52:27 -07:00
David Sidrane
3581099c09
Revert "boards: disable BDMA on STM32H7 for now"
...
This reverts commit f0d1f1d679
.
2021-03-23 05:52:27 -07:00
David Sidrane
216959e221
holybro durandal-v1:Enable ADC3 in support of temperature sensing
2021-03-19 15:48:47 +01:00
Daniel Agar
4b99bd2077
boards: remove optional external ADIS IMUs to save flash
2021-03-15 13:37:24 -04:00
Daniel Agar
2257c3767e
simple gyro auto calibration module
2021-03-15 09:46:47 +01:00
Daniel Agar
f8eaa6e46b
ROMFS handle bl_update generically
...
- include all available legacy bootloaders
2021-03-11 00:38:18 +01:00
Daniel Agar
4d288512b5
add board architecture specific init defaults
2021-03-09 19:59:41 +01:00
Daniel Agar
a0b9b44ff6
boards: stm32h7 set CONFIG_SDMMC1 consistently
2021-03-09 09:37:05 -05:00
David Sidrane
c2a5b5ed88
holybro_durandal-v1:Use Auto LSE Drive setting
2021-03-05 15:40:09 -05:00
Daniel Agar
19de1e57e3
gyro_fft promote to modules and include on all boards
2021-03-05 10:56:54 -05:00
Beat Küng
7e33d03470
drivers: remove tap_esc
...
- it's not used anymore
- it would need a refactoring to use mixer_module
2021-02-25 09:28:37 -05:00
Daniel Agar
cd7713eba2
boards: delete unused variants
2021-02-22 20:08:36 -05:00
Daniel Agar
414f9f81d9
move fake GPS to standalone module
2021-02-20 14:13:36 -05:00
Daniel Agar
ab0d0fd0be
uORB move to PX4 platform layer
2021-02-17 11:25:56 -05:00
Daniel Agar
44df0fb7a2
Analog Devices ADIS16448 rewrite
...
- new IMU driver structure with state machine (no sleeps in bus thread)
- verify all configured registers and trigger reset on failure
- detect if DIO1 or DIO2 are actually connected for data ready interrupt usage
- don't use CRC-16 on burst transfers except for verified lots
2021-02-16 10:29:07 +01:00
Daniel Agar
fb2a199621
delete unmaintaned mkblctrl driver
2021-02-14 10:38:15 +01:00
Daniel Agar
a257120e8d
boards: use new param default mechanism
2021-02-12 08:27:47 -05:00
Daniel Agar
8f0918a16b
boards: remove unused linker __param section
2021-02-08 23:22:48 -05:00
Daniel Agar
a2442ffb48
board: enable UAVCAN sensors by default on F7/H7
2021-02-02 09:01:12 +01:00
Daniel Agar
318c7e83b3
support up to PWM 14
...
- generate PWM_MAIN 1-14
- generate PWM_AUX 1-8
- generate PWM_EXTRA 1-8
- px4io and pwm_out directly read configuration parameters
- only available and active physical outputs are actually shown for configuration
- overall saves flash despite adding many new parameters
2021-01-30 15:55:53 +01:00
Daniel Agar
f0d1f1d679
boards: disable BDMA on STM32H7 for now
2021-01-28 21:16:23 +01:00
Daniel Agar
1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again ( #16573 )
...
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
2021-01-17 22:40:21 -05:00
Daniel Agar
cb74cb8692
boards: enable CONFIG_ARMV7M_LAZYFPU everywhere
2021-01-12 09:04:38 +01:00
Daniel Agar
763c3b8fda
boards: start enabling multi-EKF by default on F7/H7
2021-01-10 17:56:34 +01:00
Matthias Grob
7545249215
Add flight_mode_manager to all targets with mc_pos_control
2020-12-30 10:25:08 -05:00
David Sidrane
22bc176885
Added mft for queries
2020-12-02 20:40:23 -05:00
David Sidrane
79744ec156
holybro_durandal-v1: Use px4_platform_configure
2020-12-02 20:40:23 -05:00
斯东Stone
5f0ecc893e
boards: holybro/durandal add TELEM3 (/dev/ttyS4)
2020-11-29 10:17:18 -05:00
Daniel Agar
c60743b306
boards: NuttX increase file name max 32 -> 40
2020-11-08 12:51:59 -05:00
Daniel Agar
6b9dde59d6
update ecl to latest
...
- fmu-v5 debug and stackcheck builds now need to be CONSTRAINED_FLASH to fit
- delete unused holybro_durandal-v1_stackcheck build (also CONSTRAINED_FLASH)
2020-10-29 18:56:52 -04:00
David Sidrane
1fa1f8c2c5
durandal-v1:Bootloader init NULL console
2020-10-28 14:25:25 -04:00
Daniel Agar
233949a377
NuttX upgrade to 10.0.0+ defconfig changes
2020-10-28 14:25:25 -04:00
Tanja Baumann
b5ebdb8e41
add system command to get and set system time
...
* add system_time command for all boards
2020-09-26 13:09:01 -04:00
David Sidrane
6681b1ac44
holybro_durandal-v1: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
David Sidrane
5dc5ef664f
holybro_durandal-v1: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
David Sidrane
c17a0ebacf
holybro_durandal-v1:Add support for DMA on SPI6
2020-09-16 21:32:04 -04:00
David Sidrane
59f914427c
holybro_durandal-v1 Updates for NuttX 9.1.0-
...
holybro_durandal-v1: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00
David Sidrane
e8e463b875
cubepilot_cubeyellow Updates for NuttX 9.1.0-
...
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00