vierfuffzig
f8d43bc96b
HAL_ChibiOs: add default support for board versions with ICM20602
2018-11-11 07:07:52 +11:00
Andrew Tridgell
24ba876e88
HAL_ChibiOS: don't use STDOUT_SERIAL on mindpx-v2 or cube-red
...
better to use USB, giving us one more uart
2018-11-10 14:12:42 +11:00
auturgy
575d03796c
AP_HAL_ChibiOS: fix typo in fmuv5 hwdef [NFC]
...
header comment fixed from fmuv3 to fmuv5
2018-11-09 18:58:27 +09:00
vierfuffzig
d204939cb2
AP_HAL_ChibiOS: set default type for boards with onboard OSD
2018-11-09 08:12:51 +11:00
Peter Barker
17f643719a
AP_HAL_ChibiOS: add override keyword in many places
2018-11-08 11:30:12 +11:00
Andrew Tridgell
a0c57979ab
HAL_ChibiOS: use opendrain outputs for LEDs on iomcu
2018-11-07 07:35:45 +11:00
Andrew Tridgell
7168a0297a
HAL_ChibiOS: display RC protocol for iocmu
2018-11-07 07:35:45 +11:00
Andrew Tridgell
a69f66eadd
HAL_ChibiOS: ensure RCIN sigbuf has even number of words
...
ObjectBuffer rounds up by 1, leaving an odd number of words, which
caused DSM RC input corruption
2018-11-07 07:35:45 +11:00
Andrew Tridgell
6c128fcaf2
HAL_ChibiOS: signal2 does not need to be DMA safe
2018-11-07 07:35:45 +11:00
Andrew Tridgell
e3a01c661f
HAL_ChibiOS: switched to USB for console on pixracer
2018-11-07 07:35:45 +11:00
Andrew Tridgell
56203204cc
HAL_ChibiOS: fixed build of bootloaders
2018-11-07 07:35:45 +11:00
Andrew Tridgell
b950b83eea
HAL_ChibiOS: fixed build with EICU RC input
2018-11-07 07:35:45 +11:00
Andrew Tridgell
5dd0086698
HAL_ChibiOS: make SoftSigReader considerably more efficient
...
this reduces interrupt latency on the F100, which allows us to use all
RC input protocols on the pulse based decoder, allowing for more
flexibility in RC input protocols
2018-11-07 07:35:45 +11:00
Andrew Tridgell
dbc05f787b
HAL_ChibiOS: display decoded RC protocol
2018-11-07 07:35:45 +11:00
Andrew Tridgell
d18277487e
HAL_ChibiOS: use RCIN pin for only PPM only on iomcu
...
use uarts for SBUS and other serial protocols
2018-11-07 07:35:45 +11:00
Andrew Tridgell
7c1ba15031
HAL_ChibiOS: fixed syntax error on RCIN pin for iomcu
2018-11-07 07:35:45 +11:00
Andrew Tridgell
86ab3d7669
HAL_ChibiOS: turn off green ring LED on cube
2018-11-07 07:35:45 +11:00
Andrew Tridgell
fcc259ae31
HAL_ChibiOS: separate out F1 CR1 calculations
...
and modify pin speeds for iomcu uarts
2018-11-07 07:35:45 +11:00
Andrew Tridgell
7e66bb69b9
HAL_ChibiOS: enable amber LED on iomcu
2018-11-07 07:35:45 +11:00
Andrew Tridgell
3ab1cd4808
HAL_ChibiOS: fixed build
2018-11-07 07:35:45 +11:00
Eugene Shamaev
032c5ab707
AP_HAL_ChibiOS: Binding update for DSM
2018-11-07 07:35:45 +11:00
Andrew Tridgell
f69360844f
HAL_ChibiOS: enable USART1 for iomcu for spektrum input
2018-11-07 07:35:45 +11:00
Andrew Tridgell
065dba973b
HAL_ChibiOS: fixed build warning on iomcu
2018-11-07 07:35:45 +11:00
Andrew Tridgell
81fe8b7138
HAL_ChibiOS: allow set of safety mask from IOMCU
2018-11-07 07:35:45 +11:00
fat_dell
d1f557e96b
HAL_ChibiOS: added Omnibusf4v6 board, based on omnibusnanov6.
2018-11-04 22:00:15 +11:00
Andrew Tridgell
49ce9d02b1
HAL_ChibiOS: ensure RC in channels are bounded
2018-11-02 22:52:25 +11:00
vierfuffzig
e04ebb1326
HAL_ChibiOS: set BATT_MON default on boards with onboard volt/curr sens
2018-10-31 21:29:33 +11:00
Andrew Tridgell
78a32df2e7
HAL_ChibiOS: make all boards base GPIOs for servos at 50
...
this makes the docs for GPIO pins consistent across boards
2018-10-31 20:10:52 +11:00
fnoop
deeaf6ec09
AP_HAL_ChibiOS: Add UARTS to F405-Wing bootloader
...
AP_HAL_ChibiOS: Add pins to support new UART_ORDER uarts
AP_HAL_ChibiOS: Add UARTs to F405-Wing hwdef-bl.dat to support firmware upload on UARTS
2018-10-31 16:01:39 +11:00
Peter Barker
d2cf065fdf
AP_HAL_ChibiOS: return uart link bandwidth
2018-10-30 19:31:37 +11:00
Andrew Tridgell
7e777d8b28
HAL_ChibiOS: disable loop() delay for iofirmware
2018-10-30 13:00:48 +11:00
Andrew Tridgell
6c761fa864
HAL_ChibiOS: shutdown IOMCU on reboot
2018-10-30 13:00:48 +11:00
Andrew Tridgell
b3946fc458
HAL_ChibiOS: added uart for sbus out in IOMCU
2018-10-30 13:00:48 +11:00
Andrew Tridgell
af4340d1d1
HAL_ChibiOS: enable analog input on IOMCU
2018-10-30 13:00:48 +11:00
Andrew Tridgell
a6b35d6496
HAL_ChibiOS: restore old ODR behaviour for F4 boards
...
This fixes an issue with ESP8366 on Pixracer
2018-10-30 12:49:16 +11:00
Andrew Tridgell
6dd44a6d35
HAL_ChibiOS: fixed LED mapping for fmuv4
2018-10-29 14:04:32 +11:00
vierfuffzig
895cc0713b
ChibiOS: fix F35Lightning default BATT_CURR_SCALE
2018-10-24 07:45:10 +10:00
Andrew Tridgell
d644150871
HAL_ChibiOS: fixes for DrotekP3Pro
2018-10-21 09:59:44 +11:00
Kevin Lopez Alvarez
6f99c706d6
HAL_ChibiOS: add MCU tables for STM32F469
2018-10-21 09:59:44 +11:00
Kevin Lopez Alvarez
bf745d1960
HAL_ChibiOS: add DrotekP3Pro hardware definitions
2018-10-21 09:59:44 +11:00
Phillip Kocmoud
44fb61da37
HAL_ChibiOS: mRo X2.1-777 / hwdef.dat
...
Set proper sensor orientation.
2018-10-21 07:50:44 +11:00
Andrew Tridgell
c622a4c4d6
HAL_ChibiOS: fixed output pins on F100 iomcu
2018-10-17 16:45:37 +11:00
Andrew Tridgell
7b67146bc4
HAL_ChibiOS: use less memory in SoftSigReader
2018-10-17 15:11:28 +11:00
Andrew Tridgell
d083cd87d6
HAL_ChibiOS: disable debug code by default for iomcu
...
use --enable-asserts instead
2018-10-17 15:11:28 +11:00
Andrew Tridgell
d7aaaa35bd
HAL_ChibiOS: disable RCIN and timer threads for iomcu
2018-10-17 15:11:28 +11:00
Andrew Tridgell
8a4e0bd58c
HAL_ChibiOS: fixed RCIN for iomcu
...
we need to disable/re-enable DMA on each IRQ for the STM32F10x
2018-10-17 15:11:28 +11:00
Andrew Tridgell
15141a6a5a
HAL_ChibiOS: allow for no RCIN or TIMER thread
...
saves memory on iomcu
2018-10-17 15:11:28 +11:00
Andrew Tridgell
4674a1c68d
HAL_ChibiOS: fixed system time for clocks other than 1MHz
...
needed for IOMCU
2018-10-17 15:11:28 +11:00
Andrew Tridgell
298a91ac7c
HAL_ChibiOS: allow reduction of memory for SoftSigReader
...
for IOMCU
2018-10-17 15:11:28 +11:00
rain-er
565b370330
UART4 added for BLHeli ESC telemetry
2018-10-17 13:57:19 +11:00
