Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-02-23 00:04:02 -04:00
Code Issues Packages Projects Releases Wiki Activity
10,042 Commits 71 Branches 511 Tags 738 MiB
e8f48af1b5
Commit Graph

4253 Commits

Author SHA1 Message Date
Randy Mackay
bffa7c3783 Camera: correct _trigger_type comment 2013-12-06 10:28:36 +09:00
Randy Mackay
4148c4e024 TradHeli: bug fix for main rotor ramp up 
The main rotor ramp was being held back by the rotor speed estimate
instead of being allowed to jump up to the estimate if it's lower.

Also fixed some incorrect indentation
 2013-12-05 21:24:20 +09:00
Randy Mackay
8149b54807 Copter: add Y6 with all top props CW 
Set FRAME parameter to 10
 2013-12-03 23:22:14 +09:00
Randy Mackay
e54bf3e87c RangeFinder: reduce PulsedLight max distance 
Reduced from 25m to 14m
 2013-12-03 20:26:23 +09:00
Randy Mackay
3970c8f038 RangeFinder: add PulsedLight example sketch 2013-12-02 20:06:49 +09:00
Randy Mackay
e88251f7e1 RangeFinder: add PulsedLight LRF 2013-12-02 20:06:43 +09:00
Randy Mackay
f8e269cd04 OptFlow: correct SPI mode and baud rates 2013-12-01 23:20:02 +09:00
Randy Mackay
def5ddb747 AP_Notify: disable buzzer along with external leds 2013-11-30 23:27:58 +09:00
Randy Mackay
f8b4187148 AP_Notify: define external led pins for non APM boards 
resolves compiler errors
 2013-11-30 23:27:27 +09:00
Randy Mackay
aae18f9ead AP_Notify: allow external leds to be disabled 2013-11-30 22:53:40 +09:00
Randy Mackay
1f0fb3f06b AP_Notify: add Buzzer 2013-11-30 18:20:51 +09:00
Robert Lefebvre
d1cf9f949f AP_Notify: ExternalLED library 2013-11-30 18:20:49 +09:00
Andrew Tridgell
ee7c742863 AP_Airspeed: changed default pin for SITL to pin 1 
this leaves room for the sonar
 2013-11-28 21:44:32 +11:00
Andrew Tridgell
b075f8735f SITL: moved airspeed pin to pin 1 
keep it separate from the sonar, allowing both to be used at the same time
 2013-11-28 21:44:05 +11:00
Ben Nizette
339da1c21b SITL: Add noise and glitching behaviour for the sonar sensor 2013-11-28 21:38:05 +11:00
Ben Nizette
70d37d2cf6 SITL: Wire in basic support for SITL downward-looking sonar sensors 2013-11-28 21:38:05 +11:00
Ben Nizette
f4d349eff8 SITL: Wire in random noise and fixed drift for the SITL barometer 2013-11-28 21:38:05 +11:00
Ben Nizette
59a54aae20 SITL: Add barometer drift parameter to the SITL library 2013-11-28 21:35:13 +11:00
Randy Mackay
90937be3d4 AP_Motors: fix example sketch 2013-11-28 11:34:00 +09:00
Randy Mackay
f9e19b8006 TradHeli: remove use of motor_out array 
No longer required for logging purposes as we have RCOU
 2013-11-27 22:33:02 +09:00
Randy Mackay
851a538692 Copter: motor matrix comment change 2013-11-27 22:33:01 +09:00
Randy Mackay
652b4b4fe5 SingleCopter: motor test flaps servos in order 2013-11-27 22:33:00 +09:00
Randy Mackay
ccedf98238 Tri: call output_min at end of motors test 
Minor change to comments
 2013-11-27 22:32:49 +09:00
Randy Mackay
9f2086baf2 Copter: make motor_out array private 
With new method of logging rc outputs access to the motor_out array is
not longer required
 2013-11-27 21:55:28 +09:00
Randy Mackay
ef2597a626 DataFlash: rename Log_Write_SERVO to Log_Write_RCOU 2013-11-27 20:17:41 +09:00
Randy Mackay
84fdff4cd6 Compass: slightly relax HMC5843 calibration limits 
Some users have reported Z axis values as high as 1.33.  Their compasses
seem otherwise health so extending the limits slightly.
 2013-11-27 15:36:34 +09:00
Randy Mackay
f8e2947823 RC_Channel: parameter @Units to pwm 2013-11-26 22:34:28 +09:00
Randy Mackay
fd9b115d01 INS: move Product ID to @User Advanced 2013-11-26 22:18:28 +09:00
Randy Mackay
c4df3ea187 Fence: parameter display name fix 2013-11-26 22:18:05 +09:00
Andrew Tridgell
4b4f5ed1c0 HAL_PX4: support get_system_id() on PX4 2013-11-26 13:00:03 +11:00
Andrew Tridgell
f95bea699b AP_HAL: added get_system_id() method on Util 2013-11-26 13:00:03 +11:00
Andrew Tridgell
825b360fb0 DataFlash: added RCIN and SRVO log methods 2013-11-26 09:04:43 +11:00
Andrew Tridgell
0a2f2619de DataFlash: fixed SITL dataflash logging 
block numbers are 1 based
 2013-11-26 09:04:43 +11:00
Randy Mackay
e489224c6b GPSGlitch: update @Range for RADIUS and ACCEL params 2013-11-24 23:21:19 +09:00
Randy Mackay
bd6511dd0a GPS: add GPS_UBLOX_passthrough sketch 
This sketch allows the user to configure the Ublox GPS using U-Center
without the need for an FTDI cable.
 2013-11-24 14:53:08 +09:00
Randy Mackay
2d202df98a Sprayer: fixed example sketch 2013-11-24 14:11:52 +09:00
Andrew Tridgell
b248cc0868 AP_AHRS: fixed a build warning 2013-11-23 21:44:56 +11:00
Andrew Tridgell
710d5119b5 AP_AHRS: added attitude_reset() method for HIL_SENSORS 2013-11-23 19:29:23 +11:00
Andrew Tridgell
ac24ff0b1e GCS_MAVLink: added support for 3 UARTs 
support 3 UARTs on non-AVR platforms
 2013-11-23 19:29:22 +11:00
Andrew Tridgell
0b25ff0a16 HAL_PX4: added uartD 2013-11-23 19:29:22 +11:00
Andrew Tridgell
c000a08d6f HAL_LINUX: added uartD 2013-11-23 19:29:22 +11:00
Andrew Tridgell
0848412479 HAL_FLYMAPLE: added uartD 2013-11-23 19:29:22 +11:00
Andrew Tridgell
5e980a5b49 HAL_EMPTY: added uartD 2013-11-23 19:29:22 +11:00
Andrew Tridgell
18eadfd69e HAL_SITL: added uartD 2013-11-23 19:29:22 +11:00
Andrew Tridgell
4fb1fdb627 HAL_AVR: added NULL uartD 2013-11-23 19:29:22 +11:00
Andrew Tridgell
cbc0f3ec27 AP_HAL: support uartD on some boards 
PX4 and SITL get an extra UART
 2013-11-23 19:29:22 +11:00
Andrew Tridgell
72415ed358 AP_GPS: change HIL GPS to always be 5Hz 
this prevents too short updates in DCM from affecting attitude
 2013-11-23 18:50:57 +11:00
Andrew Tridgell
6ed493b10f AP_AHRS: added attitude_reset() method for HIL_SENSORS 2013-11-23 18:50:56 +11:00
Andrew Tridgell
8b254f2947 HAL_EMPTY: prevent valgrind errors 
zero I2C transfers
 2013-11-23 18:50:55 +11:00
Andrew Tridgell
316ec5864e AP_Motors: removed incorrect Makefile target 2013-11-23 18:50:55 +11:00
Andrew Tridgell
b62501aaea HAL_FLYMAPLE: removed incorrect Makefile target 2013-11-23 18:50:55 +11:00
Andrew Tridgell
6c2e392d5d AP_Baro: fixed BMP085 examples build in autotest 2013-11-23 18:50:55 +11:00
Andrew Tridgell
8d227b801f GCS_MAVLink: increase max packet size to 104 
this enables the DATA96 packet to be sent
 2013-11-22 15:08:34 +11:00
Randy Mackay
dacca04b21 INav: record error_count when GPS msg is late 2013-11-21 17:02:02 +09:00
Randy Mackay
7c52572020 Ublox: disable NMEA info in 3DR config 2013-11-21 17:02:00 +09:00
Randy Mackay
4e5cb72604 Ublox: set default rate to 5hz in 3DR config 2013-11-21 17:01:58 +09:00
Randy Mackay
b349d95269 Ublox: disable TimePulse Timedata in 3DR config 2013-11-21 17:01:55 +09:00
Randy Mackay
25046b4e6d Ublox: update config to ver 7.03 2013-11-21 17:01:52 +09:00
Randy Mackay
afbb199544 TradHeli: remove slash from parameter description 
This may fix the issue in which the parameter descriptions are appearing
twice on the arducopter-parameters wiki page
 2013-11-19 11:23:07 +09:00
Randy Mackay
a147eeb1e3 INav: degrade pos error slowly on loss of GPS 
When GPS message is late by 100ms or we are glitching, degrade the GPS
vs inertial nav position error to 10% over 2 seconds instead of
immediately setting it to zero.  This avoids jumpy position estimates
when the GPS misses an update
 2013-11-18 23:19:57 +09:00
Randy Mackay
330aa95769 Copter: default MOT_SPIN_ARMED to 70 2013-11-18 17:00:17 +09:00
Randy Mackay
80059d3516 AP_HAL_AVR: resolve compiler warning 2013-11-16 16:58:32 +09:00
Randy Mackay
7233a567fb TradHeli: add accessor for phase_angle 2013-11-15 22:58:41 +09:00
Randy Mackay
c9c803ffd4 TradHeli: move STAB_COL_MIN to main parameter list 2013-11-15 22:58:32 +09:00
Randy Mackay
b71c6bfd76 TradHeli: add RSC_RUNUP_TIME param and rotor speed estimate 2013-11-15 22:58:29 +09:00
Randy Mackay
bc4dba0eea TradHeli: ext gyro gain range 0 to 1000 2013-11-15 22:58:26 +09:00
Randy Mackay
197fc67897 TradHeli: move pilot desired rotor speed to heli.pde 2013-11-15 22:58:24 +09:00
Randy Mackay
942c14258b TradHeli: ramp up changes 
Rewrote tail and main rotor ramp up methods
Moved direct drive ESC speed control into rsc_control method
Pass in ch7 servo as servo_aux to TradHeli motors object constructor
split CH7_SETPOINT parameter into GYR_GAIN and DIRECTDRIVE parameters
replaced RSC_RATE with uint8_t RSC_RAMP_TIME parameter
rename GOV_SETPOINT parameter to RSC_SETPOINT
RSC_MODE parameter description updated to indicate it controls the
source of main rotor speed
 2013-11-15 22:58:13 +09:00
Robert Lefebvre
9ac051c56d TradHeli: BugFix to ColYaw 
Credit to Jolyon Saunders for finding this bug.
 2013-11-15 22:58:11 +09:00
Robert Lefebvre
4426060ccc TradHeli: COLYAW not applied when the motor is not running 2013-11-15 22:58:06 +09:00
Robert Lefebvre
9ae66c1773 TradHeli: add support for drive tail rotors 
Repurposed external gyro and made it multi-funcitonal.
required PWM on Ch8 to start the motor in RSC Mode moved up from 100 to 400. This is to facilitate two-stage switching of the motors with PWM>100 starting the tail motor, and PWM>400 starting the main motor.
Additional amendments by Randy
 2013-11-15 22:58:04 +09:00
Randy Mackay
7ae0d3320b TradHeli: add landing collective min 2013-11-15 22:57:58 +09:00
Randy Mackay
1f65bb537f TradHeli: add get_pilot_desired_collective 
Perhaps this should be moved to the main code's heli.pde sketch
 2013-11-15 22:57:51 +09:00
Randy Mackay
13a412ee21 TradHeli: make parameters and variables private 
add accessors for variables and params required in main code
replace tabs with spaces
 2013-11-15 22:57:41 +09:00
Randy Mackay
2cc48ffcd6 Copter: formatting and param description changes 2013-11-15 22:57:37 +09:00
Randy Mackay
f5488bc447 HAL: MPU6k and Baro SPI to 8Mhz 2013-11-15 21:58:32 +09:00
Andrew Tridgell
08a6503364 HAL_AVR: force all devices on SPI0 to low speed when one is low speed 
this forces MS5611 to low speed when MPU6K is low speed
 2013-11-15 21:58:30 +09:00
Andrew Tridgell
71bb462ad0 AP_InertialSensor: use fabsf() 2013-11-15 10:43:10 +11:00
Andrew Tridgell
aef9289476 AP_InertialSensor: added INS_PRODUCT_ID values 2013-11-15 10:43:10 +11:00
Randy Mackay
d54b1ea446 CopterMotors: fix example sketch 2013-11-14 22:27:10 +09:00
Randy Mackay
ce045c77a4 Copter: remove unused variable from Single copter 2013-11-14 22:26:53 +09:00
Randy Mackay
bcbf0feff0 GPS Glitch: revert accel max to 10m/s/s 
This may not be the best real world value but it keeps the autotester
from failing because it recovers from the glitch before the 5second
time-out on the GPS failsafe
 2013-11-13 21:33:34 +09:00
Randy Mackay
14dc1a1c88 Copter: add @User and @Increment to motor params description 2013-11-13 12:28:59 +09:00
Randy Mackay
e53c57b0a6 Copter: default SPIN_WHEN_ARMED to zero 2013-11-13 12:28:01 +09:00
Randy Mackay
3bd124eb72 GPS Glitch: radius and accel max to 5m and 5m/s/s 2013-11-13 11:49:21 +09:00
Randy Mackay
81d83f1c55 SingleCopter: formatting changes 
replace tab with 4-spaces
remove blank lines
 2013-11-12 23:40:29 +09:00
ssq870424
07d3f2a3c5 Copter: add support for singlecopter airframe 
this is the newest singlecopter airframe programme.
This kind of aerial vehicles include Honeywell T-hawk and Goldeneye.
 2013-11-12 23:40:27 +09:00
Andrew Tridgell
f10a4b04ae AP_InertialSensor: make PX4 healthy call _get_sample() 
this prevents a false positive during times like arming where we are
not reading the sensors
 2013-11-10 17:03:16 +11:00
Andrew Tridgell
cfad814bfb AP_L1_Control: fixed switchover from loiter capture to circling 
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-11-09 15:52:11 +11:00
Paul Riseborough
49fe7fea07 L1_Control : Added hysteresis for rear WP capture 2013-11-09 15:40:14 +11:00
Andrew Tridgell
1393ed58d0 AP_L1_Control: fixed waypoint approach logic 
this could cause the RTL approach to not break off onto the circle
correctly
 2013-11-09 12:54:26 +11:00
Andrew Tridgell
80def01fbe AP_InertialSensor: fixed semaphore error on startup for MPU6000 2013-11-09 11:26:50 +11:00
Andrew Tridgell
3262022195 DataFlash: print FMT messages for wrapped logs 
this ensures we have FMT messages in every log, even if the log was
wrapped and the FMT messages were overwritten
 2013-11-09 11:09:42 +11:00
Andrew Tridgell
4f871c87f1 AP_AHRS: detect and try to cope with bad accels 2013-11-07 13:54:16 +11:00
Andrew Tridgell
f5299e2e11 AP_InertialSensor: added healthy check for PX4 and HIL 
used to detect bad accels
 2013-11-07 13:53:59 +11:00
Andrew Tridgell
428479b9d5 SITL: added SIM_ACCEL_FAIL option 
used to test accelerometer failure in flight
 2013-11-07 12:49:08 +11:00
Andrew Tridgell
9d7f24f754 AP_Airspeed: added healthy() API 2013-11-07 12:48:17 +11:00
Andrew Tridgell
8a65a729f3 AP_Baro: start MS5611 at high speed 2013-11-07 12:48:17 +11:00
Andrew Tridgell
9ecd889e9d AP_InertialSensor: detect bad MPU6000 SPI transactions and lower bus speed 
this uses bad data or bad INT_STATUS values from the MPU6000 to detect
the sensor running too fast and lower bus speed
 2013-11-07 12:48:17 +11:00
Andrew Tridgell
d2deee07df AP_Math: fixed zero function for integer vectors 2013-11-07 12:48:16 +11:00