Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
52,716 Commits 71 Branches 509 Tags 789 MiB
Commit Graph

198 Commits

Author SHA1 Message Date
Randy Mackay 39be85cef4 AP_NavEKF3: integrate Source loss of init 2020-12-21 16:56:38 +09:00
Dr.-Ing. Amilcar do Carmo Lucas f77ab30f7a Revert "AP_NavEKF3: Remove unsupported parameter unit descriptions" 
This reverts commit 4f4a2f446d.
Makes more sense to add those to the list of supported units
 2020-12-15 18:22:36 +11:00
Paul Riseborough ed17d8e48f AP_NavEKF3: Improve parameter display names 2020-12-11 15:21:41 +11:00
Andrew Tridgell b86c014400 AP_NavEKF3: rename drag parameters to start with EK3_DRAG_ 2020-12-11 15:21:41 +11:00
Andrew Tridgell be4d10a95e AP_NavEKF3: rework parameter handling 
and fixed indentation
 2020-12-11 15:21:41 +11:00
Paul Riseborough 0d2c235027 AP_NavEKF3: Fix #define typo 2020-12-11 15:21:41 +11:00
Paul Riseborough ab05e8ed4a AP_NavEKF3: Update param descriptions 2020-12-11 15:21:41 +11:00
Paul Riseborough 4f4a2f446d AP_NavEKF3: Remove unsupported parameter unit descriptions 2020-12-11 15:21:41 +11:00
Paul Riseborough c9ab4b18b0 AP_NavEKF3: Add multicopter wind estimation 2020-12-11 15:21:41 +11:00
Andrew Tridgell 80f7906744 AP_NavEKF3: removed inhibitGps and inhibitGpsVertVel options 
these were unused
 2020-12-01 10:33:50 +11:00
Randy Mackay 4cd1c3cfde AP_NavEKF3: param conversion loses config_error 
config_error should only be run as part of setup because it may never return
 2020-11-27 08:20:07 +09:00
Randy Mackay adfc92523b AP_NavEKF3: add configuredToUseGPSForPosXY 2020-11-25 21:00:07 +11:00
Andrew Tridgell 7eea13f86f AP_NavEKF3: fixed build of standalone replay link test 
parameter conversion not needed for replay
 2020-11-24 20:46:37 +11:00
Peter Barker e1a033b296 AP_NavEKF3: make logging a core concern 
Also dissolve some methods only used for logging
 2020-11-22 20:47:29 +11:00
Peter Barker 914629351f AP_NavEKF3: use scalar rather than array for state-prediction-allowed 
EKF2 needs this for choosing alternate cores.  EKF3 does not.
 2020-11-22 14:09:48 +11:00
Randy Mackay d1983b0b77 AP_NavEKF3: fixup source param conversion 
shorten param conversion config error
if gps and optical flow are enabled we default SRC2_VELXY to optflow
convert_params run from InitialiseFilter
ensure param conversion only run once
 2020-11-20 16:43:44 +09:00
Randy Mackay 04e3623620 AP_NavEKF3: improve MAG_CAL vs EK3_SRCn_YAW checks 
MAG_CAL param description include deprecated values
Pre-arm check of MAG_CAL using deprecated values
effective_magCal interprets 5 (was EXTERNAL_YAW) as Never, 6 (was EXTERNAL_YAW_FALLBACK) as WhenFlying
Update comments in param conversion from MAG_CAL to EK3_SRC1_YAW
 2020-11-20 16:43:44 +09:00
Randy Mackay 8895d20c45 AP_NavEKF3: rename setPosVelYawSourceSet 2020-11-20 16:43:44 +09:00
Randy Mackay 0f8d0ef11b AP_NavEKF3: move sources to 2nd bank of parameters 2020-11-20 16:43:44 +09:00
Randy Mackay 33b6212cce AP_NavEKF3: rename _sources to sources 2020-11-20 16:43:44 +09:00
Randy Mackay 73835f0c11 AP_NavEKF3: pre_arm_check includes sources 2020-11-20 16:43:44 +09:00
Randy Mackay 6c0bb6a198 AP_NavEKF3: add convert_params for source 2020-11-20 16:43:44 +09:00
Randy Mackay 849e94cc24 AP_NavEKF3: call sources align inactive sources 2020-11-20 16:43:44 +09:00
Randy Mackay ba9f60abc7 AP_NavEKF3: add getVelInnovationsAndVariancesForSource 2020-11-20 16:43:44 +09:00
Randy Mackay faed58a027 AP_NavEKF3: integrate Source for yaw 2020-11-20 16:43:44 +09:00
Randy Mackay 8931e50166 AP_NavEKF3: integrate Source for alt 2020-11-20 16:43:44 +09:00
Randy Mackay c21d58ebea AP_NavEKF3: integrate Source for position 2020-11-20 16:43:44 +09:00
Andrew Tridgell 4c606a30bb AP_NavEKF3: use common structure names 2020-11-17 13:45:07 +11:00
Andrew Tridgell 21dfdc2192 AP_NavEKF3: use DAL for body frame odometry 2020-11-10 16:15:45 +11:00
Andrew Tridgell f4c3d7286c AP_NavEKF3: support replay with wheel odomotry 2020-11-10 16:15:45 +11:00
Andrew Tridgell e87f98066f AP_NavEKF3: support replay with external navigation data 2020-11-10 16:15:45 +11:00
Andrew Tridgell 31091d6307 AP_NavEKF3: use ekf_low_time_remaining for core scheduling 2020-11-10 16:15:45 +11:00
Andrew Tridgell 096aab9388 AP_NavEKF3: convert to use AP_DAL for new replay structure 
Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au>
 2020-11-10 16:15:45 +11:00
Peter Barker fc49b55b85 AP_NavEKF3: make coreBetterScore const 2020-11-03 10:39:35 +11:00
Paul Riseborough 16ae75a681 AP_NavEKF3: Consolidate and log tilt error variance calculation 2020-10-26 11:03:50 +11:00
Andrew Tridgell a4716fb9bf AP_NavEKF3: fixed multi-core yaw reset 
thanks to Alex Burka for finding this
 2020-10-24 19:35:30 +11:00
Randy Mackay eeb1a1846c AP_NavEKF3: replace prearm_healthy with pre_arm_check 2020-10-07 11:53:07 +11:00
Andrew Tridgell 2bc7d17e7a AP_NavEKF3: improved core comparison to check alignment 
this adds coreBetterScore() which takes account of tilt and yaw
alignment when comparing cores for lane switching

this ensures we don't switch to a lane that is unaligned due to the
zero error score for unaligned lanes
 2020-09-14 20:29:04 +10:00
Harshit Kumar Sankhla edc3709653 AP_NavEKF3: implement sensor affinity using EK3_AFFINITY parameter 
this allows the EKF core index to be used to select a GPS/baro/mag
instance. This is an alternative to GPS blending that allows EKF lane
switching to be used to select the right combination of GPS and IMU
add logging to XKFS message
 2020-08-27 20:20:51 +10:00
Harshit Kumar Sankhla d7edc946b6 AP_NavEKF3: Relative Error based Lane-Switching 
Improvments to the lane selection logic, we accumulate error for each
EKF lane relative to the primary for a more robust core selection
 2020-08-27 20:20:51 +10:00
Peter Barker 6b701ae3b3 AP_NavEKF3: correct includes 2020-08-07 19:20:07 +10:00
chobits 4b8be2e535 AP_NavEKF3: fix comments 2020-08-04 18:16:18 +10:00
Andy Piper e35458cedf AP_NavEKF3: INS get_sample_rate() renamed to get_loop_rate_hz() 2020-07-10 16:45:29 +10:00
Paul Riseborough 9a4108f55e AP_NavEKF3: Simplify setting EK3_MAG_CAL 
Don't require user to separately set EK3_MAG_CAL to fly without a magnetomer
 2020-07-07 15:33:58 +10:00
Paul Riseborough 0dc598a6e1 AP_NavEKF3: Fix param description and comment 2020-07-07 15:33:58 +10:00
Paul Riseborough 8ff6780323 AP_NavEKF3: Clarify distinct use cases for 'takeoff expected' 2020-07-07 15:33:58 +10:00
Peter Barker 2e55584417 AP_NavEKF3: correct comments on getFilterFaults and getFilterTimeouts methods 2020-07-07 10:50:41 +10:00
Randy Mackay dccc3e22d9 AP_NavEKF3: minor comment fix re RNG_USE_HGT 2020-06-24 21:16:50 +09:00
Paul Riseborough ed5b695c94 AP_NavEKF3: Clarify intended use of setTerrainHgtStable accessor 2020-06-24 21:16:50 +09:00
Paul Riseborough 906731222d AP_NavEKF3: Fix range aid switching logic 
Clarifies use of EK3_RANGE_USE_HGT and EK3_ALT_SOURCE parameters to control range finder use.
Setting EK3_RNG_USE_HGT to a positive number to enable automatic switching between the primary height source (baro or GPS) and range finder should be disabled if any primary height source other than Baro or GPS is selected via the EK3_ALT_SOURCE parameter.
 2020-06-24 21:16:50 +09:00
chobits c7817eaca1 AP_NavEKF3: support VISION_SPEED_ESTIMATE 
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
 2020-06-02 08:33:42 +09:00
Randy Mackay ef02942459 AP_NavEKF3: writeBodyFrameOdom accepts delay 2020-05-15 10:07:52 +09:00
Randy Mackay c28fd27b02 AP_NavEKF3: writeExtNavData accepts delay 2020-05-15 10:07:52 +09:00
Henry Wurzburg 8b3f07416c AP_NAVEKF3: change plane check_scaler value to match EKF2 value 2020-05-10 07:59:27 +10:00
Randy Mackay d763597065 AP_NavEKF3: compensate for visual odometry sensor position 2020-04-30 15:55:59 +09:00
priseborough c5e465aec9 AP_NavEKF3: add external nav system support 
includes decoupling height source from use of external nav data
 2020-04-30 15:55:59 +09:00
Randy Mackay c1ef894a30 AP_NavEKF3: getDataEKFGSF and getYawData pass by reference 2020-04-24 09:43:23 +10:00
Randy Mackay ed3d072318 AP_NavEKF3: rename GSF_RUN_MASK, GSF_USE_MASK, GSF_RST_MAX 2020-04-24 09:43:23 +10:00
Paul Riseborough 6ec69e6ed1 AP_NavEKF3: Update EK3_MAG_CAL parameter advice 2020-04-24 09:43:23 +10:00
Paul Riseborough 863f989130 AP_NavEKF3: Fix integration of GPS yaw options 
AP_NavEKF3: fix failure to arm with EK3_MAG_CAL = 7

AP_NavEKF3: Fix failure to arm when not using magnetometer

AP_NavEKF3: Reduce yaw drift when EK3_MAG_CAL = 7
 2020-04-24 09:43:22 +10:00
Paul Riseborough 410b5825fb AP_NavEKF3: Enable use of EKF-GSF yaw estimate 
AP_NavEKF3: Add emergency yaw reset using a Gussian Sum Filter estimate

AP_NavEKF3: Reduce default minimum GPS velocity noise for Copters

Enables fail-safe to be set with more sensitivity and improves tracking accuracy.
Origin values were set using typical GPS performance for receivers on sale 6 years ago. Receiver performance has improved since then.

AP_NavEKF3: Prevent constant mag anomaly yaw resets

Prevents constant magnetic anomaly induced resets that can be triggered when flying with vehicle generated magnetic interference.
Allows for two resets per takeoff. Allowance for two resets is required, becasue a large ground based magnetic yaw anomaly can cause a sufficiently large yaw innovation that two resets in close succession are required.

AP_NavEKF3: Add option to fly without magnetometer

AP_NavEKF3: Rework emergency yaw reset logic

Use a separate external accessor function to request the yaw reset.
Allow reset requests to remain active for a defined period of time.
Tidy up reset function to split out accuracy check.

AP_NavEKF3: Fix vulnerability to lane switch race condition

Prevents the situation where a lane switch results in a lane being selected that does not have the correct yaw. This can occur if the primary lane becomes unhealthy before the external failsafe monitor has time to react.

AP_NavEKF3: Fix EKF_MAG_CAL = 6 behaviours

Fix bug causing the yaw alignment to be performed at startup before the GSF had a valid estimate.
Fix bug causing emergency yaw message to be output for a normal reset.
Fix vulnerability to reported negative yaw variance.
Remove duplicate timer checks.

AP_NavEKF3: Update EK3_MAG_CAL documentation

AP_NavEKF3: Relax yaw gyro bias convergence check when not using mag

AP_NavEKF3: Reduce yaw drift in hover with no yaw sensor

Uses the GSF yaw estimate if available which is better than the EKF's own yaw when no yaw sensor is available.
 2020-04-24 09:43:22 +10:00
Peter Barker d19f8db06f AP_NavEKF3: rename APMrover2 to Rover 2020-04-14 09:50:34 +09:00
Andrew Tridgell 3ae0b0d446 AP_NavEKF3: added using_external_yaw() method 
needed by AHRS for attitudes_consistent() check
 2020-04-11 21:14:31 +10:00
Andrew Tridgell 6f04fae4a0 AP_NavEKF3: added fallback to mag option with external yaw 
this allows for a magnetometer to be used as a fallback yaw source in
flight when using an external yaw source such as a GPS. The
magnetometer bias is learned while the GPS yaw is available and
fallback is only done if the mag yaw and GPS yaw are consistent when
fallback is enabled

This also learns the Z gyro bias until first yaw alignment when
MAG_CAL is EXTERNAL_YAW_FALLBACK. This prevents large gyro bias
building while waiting for GPS lock
 2020-04-11 21:14:31 +10:00
Peter Barker e289020332 AP_NavEKF3: stop taking ahrs in constructor 2020-01-21 11:53:18 +11:00
Peter Barker 9ed37e4486 AP_NavEKF3: make send_status_report const 2019-12-11 07:54:41 +09:00
Peter Barker 4431d01230 AP_NavEKF3: stop relying on the presence of a RangeFinder 2019-12-11 08:09:01 +11:00
Mark Whitehorn 3e21ef1389 AP_NavEKF3: add prearm failure message for null core pointer 2019-10-29 11:59:29 +08:00
Randy Mackay 63309c6925 AP_NavEKF3: suppress ekf fail-to-set-origin if core disabled 2019-10-22 07:15:48 +08:00
Jaaaky 54f8e1137e AP_NavEKF3: added EK3_MAG_EF_LIM parameter 
Adapted from EKF2 implementation as of commits
3835d2613, e9ed3540f and df4fc0fff
this sets a limit on the difference between the earth field from the
WMM tables and the learned earth field inside the EKF. Setting it to
zero disables the feature. A positive value sets the limit in mGauss.
 2019-10-20 07:34:35 +11:00
Randy Mackay 5baed38266 AP_NavEKF3: reduce EK3_HRT_FILT max to 30 2019-10-18 11:15:25 +09:00
Paul Riseborough 5b1d9ed868 AP_NavEKF3: Add missing vertical position derivative calculation 2019-10-18 11:15:25 +09:00
Andrew Tridgell 3995db49a4 AP_NavEKF3: use parent class for intermediate static variables 
this makes the code faster as well as using less memory when both EK2
and EK3 are enabled
 2019-10-01 15:39:03 +10:00
Andrew Tridgell 96c6544997 AP_NavEKF3: moved intermediate variables to common memory 
this moves intermediate variables from being per-core to being common
between cores. This saves memory on systems with more than one core by
avoiding allocating this memory on every core.

This is an alternative to #11717 which moves memory onto the stack. It
doesn't save as much memory as #11717, but avoids creating large stack
frames
 2019-09-24 12:51:54 +10:00
Michael du Breuil 9a7d64e8fc AP_NavEKF3: Allow the GPS to be responsible for logging 2019-09-10 09:09:17 +10:00
Andrew Tridgell 04944fa6ce AP_NavEKF3: review fixes 
thanks Paul!
 2019-07-29 10:08:22 +10:00
Andrew Tridgell a3411efdb5 AP_NavEKF3: set origin on all cores 
when EKF origin is set, make sure it is set on all cores
 2019-07-29 10:08:22 +10:00
Andrew Tridgell 3818d8ecda AP_NavEKF3: restrict setting of EKF origin 
only allow EKF origin to be set if EKx_GPS_TYPE is set to 3, which is
used for indoor operation
 2019-07-29 10:08:22 +10:00
priseborough 0c4f92d4c1 AP_NavEKF3: Add control logic to use external yaw sensor 2019-07-13 11:05:57 +10:00
priseborough 87c7649d09 AP_NavEKF3: Add interface for yaw angle measurements 2019-07-13 11:05:57 +10:00
Andrew Tridgell 5151416080 AP_NavEKF3: force first EKF lane when disarmed 
this ensures we consistently fly with EKF lane1 if it is healthy at
the point we arm. Otherwise the choice of lane will be a lottery.

This is important as many systems have quite different filtering and
vibration characteristics on their different IMUs. We by default
enable fast sampling only on the first IMU for example, which means
the 2nd and 3rd IMUs are more vulnerable to high freq causing
aliasing.
 2019-07-04 06:48:23 +10:00
Michael du Breuil be74b631fe AP_NavEKF3: Fix AP_GPS.h include 2019-06-18 10:02:05 +10:00
Andrew Tridgell 60831c2878 AP_NavEKF3: added checkLaneSwitch() 
this allows the vehicle code to ask the EKF to change lanes if it is
about to do an EKF failsafe
 2019-06-12 09:52:20 +10:00
Andrew Tridgell e4f6ffe719 AP_NavEKF3: fixed bug in EKF lane selection 
this fixes an issue in selecting the best lane to change to when we
have 3 or more EKF cores. The bug is that if the current lane is
unhealthy it would always choose the last healthy lane instead of
choosing the lane with the lowest score
 2019-05-07 06:59:50 +10:00
Michael du Breuil fe3b29a088 AP_NavEKF3: Allow checking all cores for health 2019-04-09 10:53:25 +10:00
Paul Riseborough 0d3e1a7d23 AP_NavEKF3: flow use parameter improvements 2019-04-02 10:51:12 +11:00
Paul Riseborough d3e9281846 AP_NavEKF3: Update default plane optical flow param values 
Reduce time required to form estimate of terrain offset
 2019-04-02 10:51:12 +11:00
Paul Riseborough 35c82ef67f AP_NavEKF3: Improve optical flow height estimation 2019-04-02 10:51:12 +11:00
Paul Riseborough b848e231c7 AP_NavEKF3: Add parameter to control how optical flow data is used 2019-04-02 10:51:12 +11:00
Mark Whitehorn 3c432cf25c AP_NavEKF3: add getQuaternionBodyToNED 2019-03-29 10:58:00 +11:00
Tom Pittenger 17ee20af3f AP_NavEKF3: rename dataflash to logger 2019-03-28 16:40:57 +11:00
Arjun Vinod f382a657bd AP_NavEKF3: fixed typos 2019-02-26 08:33:39 +11:00
Tom Pittenger 55377b234f AP_NavEKF3: remove HAL_CPU_CLASS_150 check, 150 is already a minimum requirement 2019-02-17 13:00:00 -08:00
Tom Pittenger 8a6a39b590 AP_NavEKF3: unify singleton naming to _singleton and get_singleton() 2019-02-10 19:09:58 -07:00
Peter Barker 6fc76a32af GLOBAL: use AP::logger() and strip redundant Log_ from methods 2019-01-18 18:08:20 +11:00
Peter Barker b47733142f GLOBAL: rename DataFlash_Class to AP_Logger 2019-01-18 18:08:20 +11:00
Randy Mackay c616587b86 AP_NavEKF: increase ABIAS_P_NSE param doc range to 0.005 2018-12-27 14:09:53 +09:00
Michael du Breuil 25ef5fed82 AP_NavEKF3: Suppress clearing non-trival type warning 2018-10-30 16:17:03 -07:00
Peter Barker 281fad53c2 AP_NavEKF3: always set EKF control limits, even with no cores 2018-10-09 10:47:38 +11:00
Peter Barker be9235a581 AP_NavEKF3: fix writeOptFlowMeas signature 
const some of the vectors, stop taking references to scalars that aren't
being changed
 2018-09-11 09:03:22 +10:00