Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
61,331 Commits 71 Branches 508 Tags 630 MiB
Commit Graph

1652 Commits

Author SHA1 Message Date
Peter Barker 1f0ae343b1 GCS_MAVLink: tidy ADSB message handling 2023-10-27 14:16:47 +11:00
Peter Barker c1f0c9e70a GCS_MAVLink: tidy CAN message handling 2023-10-27 14:16:47 +11:00
Peter Barker 0f6718b23d GCS_MAVLink: remove FLASH_BOOTLOADER commandd if not compiled in 
removes handling of MAV_CMD_FLASH_BOOTLOADER if AP_BOOTLOADER_FLASHING_ENABLED is disabled

Side-effect of correcting the mavlink result code in that case.
 2023-10-27 14:16:47 +11:00
Peter Barker d665d2c56e GCS_MAVLink: save bytes when AP_AIS_ENABLED is false 2023-10-27 14:16:47 +11:00
Peter Barker e85f843c5d CS_MAVLink: tidy use of AP_BATTERY_ENABLED defines 
remove entire functions rather than just their content
 2023-10-26 13:23:57 +11:00
Peter Barker 2412ba495d GCS_MAVLink: remove handling of PREFLIGHT_SET_SENSOR_OFFSETS 
This was the old offboard-calibration code.

We've checked MAVProxy, QGC and MissionPlanner and they're not using this code.

The onboard calibration stuff is better.
 2023-10-26 13:19:59 +11:00
Peter Barker 740b939aa5 GCS_MAVLink: handle control-high-latency as both long and int 2023-10-26 13:19:29 +11:00
Peter Barker 21eaa08333 GCS_MAVLink: handle MAV_CMD_NAV_TAKEOFF via command_long and command_in 2023-10-24 12:59:19 +11:00
Peter Barker 0b04f765d4 GCS_MAVLink: factor out a virtual mav_frame_for_command_long method 2023-10-24 12:59:19 +11:00
Peter Barker 25846eb2bc GCS_MAVLink: handld MAV_CMD_DO_FENCE_ENABLE as both long and int 2023-10-24 11:37:18 +11:00
Peter Barker 37b02725b3 GCS_MAVLink: handle MAV_CMD_DO_SEND_BANNER as both long and int 2023-10-18 19:49:17 +11:00
Peter Barker e71227fe3a GCS_MAVLink: handle MAV_CMD_GET_HOME_POSITION as both long and int 2023-10-18 19:48:23 +11:00
Peter Barker 7713b531a0 GCS_MAVLink: allow setting modes via COMMAND_INT and DO_SET_MODE 2023-10-17 10:41:36 +11:00
Peter Barker 90d39a6ee0 GCS_MAVLink: add build option for deprecated MISSION_REQUEST 
replaced by MISSION_REQUEST_INT
 2023-10-17 10:40:12 +11:00
Peter Barker 1ece48b2b3 GCS_MAVLink: handle MAV_CMD_DEBUG_TRAP as both long and int 2023-10-17 10:25:45 +11:00
stephan 0b24dc239f GCS_MAVlink: correct routing for Solo Gimbal 
Check for a opro camera in a Solo gimbal added and re-enable the routing of Gopro Mavlink commands
 2023-10-17 10:02:49 +11:00
Peter Barker 659db36efe GCS_MAVLink: accept accel cal vehicle positions as both int and long 2023-10-12 20:39:32 +11:00
Peter Barker bb6287893d GCS_MAVLink: allow for compilation without AP_RTC_ENABLED 2023-10-11 19:17:27 +11:00
Peter Barker ce1bb64686 GCS_MAVLink: handle EKF_SOURCE_SET as both long and int 2023-10-11 18:37:02 +11:00
Willian Galvani 107474b792 GCS_Common: use int8_t for rangefinder quality_pct 2023-10-11 08:29:58 +11:00
Peter Barker 805901dc18 GCS_MAVLink: allow PREFLIGHT_STORAGE as COMMAND_INT and COMMAND_LONG 2023-10-10 08:29:26 +09:00
Peter Barker 77945be031 GCS_MAVLink: cope with NaNs being passed in when doing conversion to command_int 2023-10-05 20:44:12 +11:00
Peter Barker 57c2f7b2de GCS_MAVLink: handle DO_AUX_FUNCTION as both long and int 2023-10-04 19:01:22 +11:00
Peter Barker 33b0bf699e GCS_MAVLink: allow compilation when GPS library not available 2023-10-04 18:10:58 +11:00
Peter Barker 423a88f9cd GCS_MAVLink: handle message interval commands as both long and int 2023-10-03 10:12:21 +09:00
Andrew Tridgell 92c0e7f860 GCS_MAVLink: use mavlink_frame_char_buffer() 
and remove unnecessary extra mavlink_get_channel_status() function
 2023-10-02 21:45:28 +11:00
Andrew Tridgell ac3f4f0c5e GCS_MAVLink: use mavlink_XXX_encode_status() in example code 2023-10-02 21:45:28 +11:00
Andrew Tridgell 5f5de52984 GCS_MAVLink: allow for mavlink bindings only in GCS_MAVLink 
this is used by SITL periph to allow for mavlink based simulators
 2023-10-02 21:45:28 +11:00
Peter Barker ef8cd449ec GCS_MAVLink: handle MAV_CMD_DO_FLIGHTTERMINATION as both long and int 2023-09-27 11:27:45 -07:00
Peter Barker 0f6bf8994f GCS_MAVLink: handle MAV_CMD_AIRFRAME_CONFIGURATION as both LONG and INT 2023-09-26 11:37:42 +10:00
Asif Khan 65be0bd1ba GCS_MAVLink: add MAV_CMD_IMAGE_STOP_CAPTURE support 
Co-authored-by: Zachary Zalass <zachzalass@gmail.com>
 2023-09-21 21:05:01 +10:00
Peter Barker b44682d1a6 GCS_MAVLink: handle CAN_FORWARD as both command_INT and COMMAND_LONG 2023-09-20 17:50:56 +10:00
Peter Barker 5b0393e280 GCS_MAVLink: handle MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN as INT or LONG 2023-09-19 11:16:10 +10:00
Peter Barker 273b9ea354 GCS_MAVLink: correct sensors when no baros found 
GCSs will know we have no baros on-board, as will the RC telemetry library
 2023-09-19 07:28:30 +10:00
Peter Barker 4f0b328674 GCS_MAVLink: support preflight calibration via command_int 2023-09-13 17:24:07 +10:00
Nick Exton d47b60b92a GCS_MAVLink: Fix CAMERA_SETTINGS payload size check 2023-09-08 15:31:33 +09:00
Peter Barker ed5da4ead2 GCS_MAVLink: allow more libraries to compile with no HAL_GCS_ENABLED 2023-09-05 22:23:51 +10:00
Peter Barker 8473f05738 GCS_MAVLink: add defines for serial control, deviceop and servo_relay 2023-09-05 10:20:14 +10:00
Peter Barker fe512f7074 GCS_MAVLink: handle servo/relay events as both command_long and command_int 2023-08-29 11:15:14 +10:00
Peter Barker 92192a7510 GCS_MAVLink: add build options for deprecated messages MOUNT_CONTROL/MOUNT_CONFIGURE 
these are repalced by the command equivalents
 2023-08-29 11:06:13 +10:00
Asif Khan e3f0904616 GCS_MAVLink: move handling of all do-set-roi to AP_Mount library 2023-08-26 17:55:53 +10:00
Peter Barker a2d5244b10 GCS_MAVLink: accept mount commands as command_int 2023-08-24 22:07:12 +10:00
Nick Exton fad1f35d93 GCS_MAVLink: Remove unreachable return in handle_command_mount() 2023-08-24 11:57:55 +10:00
Tom Pittenger 732cd31f27 GCS_MAVLink: MSG_HOME_POSITION to use NaN for invalid 2023-08-23 08:53:29 -07:00
Peter Barker b141cca3d5 GCS_MAVLink: pass mavlink_message_t to handle_command_*_packet 
the "special case" blocks are getting longer and longer.  Merge the switch statements for the command type to be handled by passing around the message.
 2023-08-22 10:11:33 +10:00
Peter Barker 1dd5778956 GCS_MAVLink: correct placement of AP_MAVLINK_MISSION_SET_CURRENT_ENABLED 2023-08-22 09:09:54 +10:00
muramura 62aee72820 GCS_MAVLink: Change a number to a defined name 2023-08-15 08:36:59 +09:00
Peter Barker f2066d8e58 GCS_MAVLink: remove ap_message<->mavlinkid mappings for unused ids 2023-08-15 09:14:27 +10:00
Peter Barker 7764d1d904 GCS_MAVLink: add build_options.py option to remove rallypoint protocol 2023-08-15 08:37:17 +10:00
Peter Barker 808fcbda0e GCS_MAVLink: fix airspeed cal / format commands via non-USB telemetry 2023-08-15 08:13:32 +10:00
Andy Piper 9ac683a350 GCS_Common: report ARM CPUID on startup 2023-08-15 06:53:48 +10:00
Andy Piper cf9a3ada28 GCS_MAVLink: print out IOMCU mcuid on startup 2023-08-15 06:53:48 +10:00
Andrew Tridgell 0d97b308b2 GCS_MAVLink: fixed corruption of FTP reply component ID 
this led to not being able to do FTP transfers with
support.ardupilot.org unless MissionPlanner used the same component ID
as the support engineer GCS
 2023-08-14 22:25:23 +10:00
olliw42 2f58d082f0 GCS_Common: brackets missing in switch case 2023-08-11 12:11:43 -07:00
davidsastresas 6a9b457be3 GCS_Common: autopilot_state_for_gimbal_device sends angular_velocity_z 2023-08-10 14:37:30 +09:00
Ryan Friedman 578ba20df0 GCS_MAVLink: Use renamed visual odom function 
* Now called pose instead of position

Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
 2023-08-10 13:58:00 +09:00
Peter Barker 6097f1aa61 GCS_MAVLink: allow removal of preflight commands to fail the autopilot 2023-08-10 07:11:22 +10:00
Peter Barker 77b8c96eae GCS_MAVLink: add build_options.py option to remove fencepoint protocol 
also gate more code on defines

Saves ~2kB
 2023-08-09 17:53:54 +10:00
Peter Barker 13c83ee9f8 GCS_MAVLink: enable sending of RELAY_STATUS message 2023-08-09 07:44:07 +10:00
Peter Barker d6979e62f0 GCS_MAVLink: handle mag cal as both COMMAND_LONG and COMMAND_INT 2023-08-08 10:06:13 +10:00
Peter Barker 8d30f84e73 GCS_MAVLink: move definition of HAL_HIGH_LATENCY2_ENABLED into config 2023-08-03 13:09:23 +10:00
Peter Barker 17ec5f7d3b GCS_MAVLink: use long-to-int conversion code for SET_ROI_SYSID 
also remove more code based on the mount-enabled define
 2023-08-01 10:16:14 +10:00
Peter Barker 274aedeaae GCS_MAVLink: rely on item conversion to run DO_SET_ROI_NONE when presented in COMMAND_LONG 2023-07-19 17:03:00 +09:00
Peter Barker ae8d3724cd GCS_MAVLink: convert to COMMAND_INT to handle MAV_CMD_DO_SET_HOME 2023-07-18 09:10:26 +10:00
Andy Piper 504fdb4ca3 GCS_MAVLink: squash bitwise | operator warnings 2023-07-13 11:02:40 +10:00
Peter Barker f3e5e28364 GCS_MAVLink: zero structured passed in to convert_COMMAND_LONG_to_COMMAND_INT 2023-07-12 18:51:07 +10:00
Peter Barker 527f3d5728 GCS_MAVLink: add infrastructure to handle command longs as command ints 2023-07-12 18:51:07 +10:00
Andrew Tridgell 62b2fdb8f8 GCS_MAVLink: update to new read_locked() API 2023-07-12 17:06:02 +10:00
Max-001 afc019e1ea EFI: added efi MavLink class 2023-07-11 12:32:19 +10:00
Iampete1 352f721626 GCS_MAVLink: allow scripting to block commands 2023-07-04 10:20:42 +10:00
Andrew Tridgell 7fa0de37c3 GCS_MAVLink: added mutex deadlock test code 2023-06-27 10:11:46 +10:00
Peter Barker a2ecaf737d GCS_MAVLink: correct define around use of ins singleton 2023-06-21 22:28:48 +10:00
Peter Barker ed96bb6dd4 GCS_MAVLink: rely on HAL_LOGGING_ENABLED for sending logs 2023-06-21 22:28:48 +10:00
Peter Barker a6a691cce3 GCS_MAVLink: add and use AP_GPS_ENABLED 2023-06-21 22:28:48 +10:00
Peter Barker 61affcf4e4 GCS_MAVLink: add and use AP_BARO_ENABLED 2023-06-21 22:28:48 +10:00
Peter Barker fc55bf0bc4 GCS_MAVLink: add and use AP_COMPASS_ENABLED 2023-06-21 22:28:48 +10:00
Peter Barker 42e42dc991 GCS_MAVLink: add and use AP_AHRS_ENABLED 2023-06-21 22:28:48 +10:00
Peter Barker 07bf38d7f8 GCS_MAVLink: create and use AP_BATTERY_ENABLED 
simply as a way to get HAL_PERIPH_ENABLE_BATTERY out of the main code
 2023-06-21 22:28:48 +10:00
Peter Barker e3c4d9fd23 GCS_MAVLink: allocate mavlink status and send buffers dynamically 
This makes ArduPilot responsible for supplying buffers to the mavlink layer, rather than that layer allocating them based on MAVLINK_COMM_NUM_BUFFERS.

We will want to rename MAVLINK_COMM_NUM_BUFFERS to AP_GCS_MAX_BACKENDS at some stage.
 2023-06-21 17:50:31 +10:00
Andrew Tridgell fc904011fb GCS_MAVLink: moved MAV_CMD_AIRFRAME_CONFIGURATION from copter 2023-06-21 17:38:28 +10:00
Peter Barker 86d09d9096 GCS_MAVLink: add option to disable relay and servorelay libraries 2023-06-20 09:36:39 +10:00
bugobliterator e30cc65f14 GCS_MAVLink: move sysid_my_gcs to be public 2023-06-17 14:49:22 +10:00
Randy Mackay 02fdb8272f GCS_MAVLink: support camera info and settings 2023-06-16 14:30:46 +10:00
davidsastresas e1e2d68815 GCS_Common: handle CMD_DO_SET_ROI_NONE for command int packets 2023-06-08 21:12:50 +10:00
Peter Barker 312254f761 GCS_MAVLink: correct detection of feature AP_FILESYSTEM_FORMAT_ENABLED 2023-06-08 08:55:26 +10:00
Andrew Tridgell 1ab278d127 GCS_MAVLink: support EXTERNAL_POSITION_ESTIMATE command_int 2023-06-06 15:19:12 +10:00
Peter Barker 4ee58c4496 GCS_MAVLink: remove more compass cal if it is not enabled 2023-05-30 23:05:29 +10:00
Peter Barker 92942137fa GCS_MAVLink: remove use of AP_Mount.h from headers 2023-05-29 09:08:55 +10:00
bugobliterator 9ce37e5f98 GCS_MAVLink: scripting sends mavlink messages directly 2023-05-24 19:03:28 +10:00
Michael du Breuil a934c90e69 GCS_MAVLink: Route MAVLink data to/from scripting 2023-05-24 19:03:28 +10:00
Asif Khan 9ef3241949 GCS_MAVLink: add GIMBAL_MANAGER_SET_PITCHYAW message support 2023-05-24 12:36:37 +10:00
davidsastresas e4428f538d GCS_MAVLink: support gimbal_manager_status and do_gimbal_manager_configure 
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
 2023-05-17 12:38:49 +10:00
Peter Barker d46d2189ec GCS_MAVLink: replace HAVE_FILESYSTEM_SUPPORT with backend defines 2023-05-17 09:40:39 +10:00
Peter Barker 29d6c51f43 SITL: stop using mavlink channels for packing messages 
precedent was set in the mavlink rangefinder; we don't need to re-use SITL buffers for this
 2023-05-16 10:17:56 +10:00
Randy Mackay 858a1e8b40 GCS_MAVLink: pass image tracking messages to AP_Camera 2023-05-08 21:26:35 +10:00
Peter Barker feaed97601 GCS_MAVLink: deprecate handling of MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES 
AUTOPILOT_VERSION - the message this returns - can be requested with MAV_CMD_REQUEST_MESSAGE
 2023-04-26 20:34:42 +10:00
Peter Barker d0b96d4cd9 GCS_MAVLink: deprecate handling of AUTOPILOT_VERSION_REQUEST 
This can be done equivalently with MAV_CMD_REQUEST_MESSAGE
 2023-04-26 20:34:42 +10:00
Randy Mackay bdb3618de7 GCS_MAVLink: support requests for gimbal-manager-information 2023-04-25 15:07:35 +10:00
Michael du Breuil a9d696752d GCS_MAVLink: Factor accel cal work out to INS library 2023-04-21 21:33:16 +10:00
Peter Barker 15ec9f6f82 GCS_MAVLink: allow Copter to emit MISSION_STATE_PAUSED when paused in auto 2023-04-21 09:49:55 +10:00