Commit Graph

7343 Commits

Author SHA1 Message Date
Christopher Hrabia 9760cdf2d7 Compass: corrected space 2013-03-18 14:27:49 +09:00
Andrew Tridgell 952c56e990 Copter: fixed barometer init in HIL sensors mode 2013-03-18 16:20:25 +11:00
Andrew Tridgell ac06b5e62d Copter: remove unused function 2013-03-18 16:20:25 +11:00
Randy Mackay 36834e77b5 Copter: remove support for CLI Slider 2013-03-18 14:07:04 +09:00
Randy Mackay 597a4b912a Copter: fix to allow building HIL_MODE_SENSORS 2013-03-18 13:41:52 +09:00
Andrew Tridgell ac10e7ea26 Tools: build all the PX4 copter frame types 2013-03-18 15:23:09 +11:00
Andrew Tridgell 3deaf0beee Tools: added the top level scripts for autotest 2013-03-18 15:16:08 +11:00
Andrew Tridgell 1d836db862 build: added all 7 copter frame types to binary build 2013-03-18 14:44:41 +11:00
Andrew Tridgell ba8ba36af4 HAL_AVR: fixed build.Examples in autotest 2013-03-18 14:01:21 +11:00
Andrew Tridgell ac69a531d3 HAL_PX4: workaround problem with APM file on SD card
this works around file redirection bug from earlier firmwares
2013-03-18 13:12:17 +11:00
Randy Mackay d1344e8c39 Copter: remove #define for CROSSTRACK_GAIN
Note: the cross track is still calculated inside the inertial nav based
loiter and wp controls but it's no longer requires a tunable parameter
2013-03-17 16:56:18 +09:00
Randy Mackay 1b6fcad90a Copter: remove tilt compensation parameter
Note: this idea of feed forward tilt compensation is being incorporated
into the inertial nav based loiter and wp controllers but does not
require a separate tunable parameter
2013-03-17 16:53:32 +09:00
Randy Mackay 61e29173e3 Copter: remove unused crosstrack variables and parameters
Cross track is still calculated internally to the wpnav controller so we
should move this to a library and still report it to the ground station
2013-03-17 16:46:31 +09:00
Randy Mackay a1295c042b Copter: fix init of wp_verify_byte so wp alt is always required 2013-03-17 16:37:30 +09:00
Andrew Tridgell 551950c573 GPS_UBLOX: fixed auto-config of baudrate
this fixes the setting of the baudrate on a uBlox that is configured
for 9600. It fixes the NMEA message to have a \r\n, plus sends the
NAV_SOL rate config before the NMEA baudrate config message.

This fixes issue #159
2013-03-17 17:52:48 +11:00
Randy Mackay fdcb78ccf7 Copter: leonard's smoother alt-hold transition
Target altitude when entering alt-hold is based on a projection from
current alt and climb rate
2013-03-17 13:24:49 +09:00
Randy Mackay 37040adfaa Copter: bug fix for auto missions over 320m
get_throttle_althold_with_slew's target_alt parameter defined as int16_t
(instead of int32_t) meaning missions with altitudes >320m could wrap
around and become negative.
2013-03-17 11:14:35 +09:00
Randy Mackay c9571ad543 InertialNav: remove 3sec limit on position est after losing GPS 2013-03-16 18:15:59 +09:00
Andrew Tridgell 6a1aad30f1 HAL_PX4: auto-create APM directory on SD card 2013-03-16 19:47:09 +11:00
Andrew Tridgell bb14672dab Rover: fixed PX4 MPU6000 driver for rover 2013-03-16 19:47:09 +11:00
Randy Mackay 150046f2b8 Copter: GPS Failsafe implemented
Switches to LAND mode 5 seconds after losing GPS if you're in a flight
mode that requires a GPS
2013-03-16 17:27:46 +09:00
Randy Mackay f9539384a1 Copter: rename failsafe to failsafe_radio
Makes way for separation of failsafes for throttle, gps and gcs
2013-03-16 17:14:21 +09:00
Randy Mackay f263e81ed7 Copter: remove unused GPS and baro filters
Saves 24bytes of RAM
Removing the baro filter leads to noisier Baro Alt appearing in the log
so we should make the inertial nav altitude appear in the CTUN message
2013-03-16 00:20:15 +09:00
Andrew Tridgell 232bdca4e2 autotest: improved skid steering test scripts 2013-03-15 11:05:03 +11:00
Andrew Tridgell 0dde0b3551 Rover: initial implementation of skid steering for APMrover2
this adds SKID_STEER_IN and SKID_STEER_OUT parameters for controlling
skid skeering control and output
2013-03-15 11:04:33 +11:00
Andrew Tridgell 8d8e30156f autotest: added skid steering version of rover sim start script 2013-03-15 09:52:57 +11:00
Andrew Tridgell 6ea2130342 autotest: added skid steering support to rover simulator
Very rough initial implementation. Needs to be tweaked for more
realistic behaviour later.

thanks to Greg Brill for pointers on this.
2013-03-15 09:52:32 +11:00
Andrew Tridgell 5ddbad6ccb Rover: remove scaling of voltage pin 2013-03-15 08:40:32 +11:00
Andrew Tridgell 7681f3b639 AP_HAL: update AnalogIn example to show voltages not raw values 2013-03-15 08:39:22 +11:00
Andrew Tridgell af141c2487 Rover: implement RSSI_PIN
route RSSI value from receiver to MAVLink
2013-03-15 08:08:35 +11:00
Andrew Tridgell c1c967f3bf DataFlash: fixed test sketch build and run 2013-03-15 07:30:40 +11:00
Andrew Tridgell a7541e9ad3 DataFlash: report log number when starting a new log
helps with test sketch
2013-03-15 07:30:23 +11:00
Andrew Tridgell cf62619108 build: record git version in firmware build 2013-03-14 12:58:33 +11:00
Andrew Tridgell d9be58fd2c autotest: add 10 mins to timeout
this copes with build_binaries.sh
2013-03-13 08:23:41 +11:00
Andrew Tridgell 36ff950b12 Plane: fixed MAVLink target IDs in fence point message
thanks to Kevin Hester for finding this
2013-03-12 15:04:48 +11:00
Andrew Tridgell 8b87d3643b autotest: fixed mavlink paths 2013-03-12 13:15:41 +11:00
Andrew Tridgell d06668f1cd build: added support for "make apm1-1280" 2013-03-12 12:45:49 +11:00
Andrew Tridgell 5762a13223 build: add 1280 build for rover and plane 2013-03-12 12:45:21 +11:00
Andrew Tridgell 5db1dbd8d1 autotest: fixed python path for mavtemplate 2013-03-12 11:49:43 +11:00
Andrew Tridgell ba8d830754 DataFlash: start to fix example build 2013-03-11 13:02:08 +11:00
Andrew Tridgell cb414fb652 Build: fixed location of latest/ directory 2013-03-10 22:00:03 +11:00
Kevin Hester 9885cc7ed1 Docs: Add XML emit to param_parse.py. See below for more details...
I've refactored the param_parse tool to use various 'emitters'.  An emitter
can take parameter info and output it in a particular format.  Currently the
only supported emitters are the wiki and XML formats.

The goal of these changes is to create a standard machine readable description
of parameters - mainly for use by ground control stations, but it will also
enable spiffy scripting environments where code can refer symbolically to
vehicle parameters (reflectionish).

Open issue: Is there any sort of Ardupilot build id which can be included in
the generated XML?  That would ensure that we select the correct paramdefs
for the load on the target (possibly by asking the target for a SHA or
somesuch).  If that issue is resolved, then the filename for the XML
file should probably be something like:
arduplane-ca5742ac.pdef.xml.

It is worth noting that I've proposed a suffix of ".pdef.xml" for these file
types.  This facilitates automated file handling on Android devices.  On
Android you can register 'handlers' for particular file extensions and if
the user tries to open that extension in email or a web browser your app
will be given a chance to do something about it.  The 'outer' xml extension
will allow naive editors to know that at least this is an xml file.

I will include a sample of the XML format with the pull-request for this CL.
2013-03-10 17:47:42 +11:00
Andrew Tridgell fcfed2e81d autotest: build all binaries for master on each commit 2013-03-10 17:16:56 +11:00
John Arne Birkeland 9487eb6c1b Examples: Improved compatibility with Mission Planner serial terminal (CLI) 2013-03-09 15:02:56 +11:00
Andrew Tridgell 0a385cc0ff Plane: added TKOFF_THR_MINACC option
this is used for triggering auto takeoff with a hand launched plane
2013-03-09 14:41:04 +11:00
Michael Warren 9697ff5d6d Plane: Added extra parameter to specify at what speed in auto-takeoff throttle should engage
This adds TKOFF_THR_MINSPD in m/s
2013-03-09 14:19:48 +11:00
Andrew Tridgell 87c6545ac6 Plane: don't trigger GCS failsafe if GCS never connected
The we have never received a heartbeat message from the GCS then don't
use the lack of heartbeat to trigger a failsafe event
2013-03-09 13:48:39 +11:00
Andrew Tridgell e93888dee9 Plane: make a throttle_cruise of 0 mean always zero throttle
this can be used for parachute landing missions

Thanks to Chris Miser for the suggestion
2013-03-09 13:48:39 +11:00
Randy Mackay 0bf6a52f7a Build: fix case of "com3" and add Arduino path override 2013-03-08 16:59:35 +09:00
Randy Mackay 66a4f6a1ec Build: MINGW can be used to build/upload apm hex 2013-03-08 15:53:09 +09:00