Randy Mackay
52d81f630f
Copter: pass polygon fence mavlink messages to fence
2016-06-25 15:55:55 +09:00
Tom Pittenger
66d4caeeb0
Copter: add ADSB_streamrate
2016-06-19 11:24:33 -07:00
Tom Pittenger
b433250da5
Copter: sanity check gps latlng
2016-06-01 17:38:50 -07:00
Peter Barker
e977d85e0c
Copter: move telemetry_delayed up into base class
2016-05-31 08:46:09 +10:00
Peter Barker
3cf174c343
Copter: move adjust_rate_for_stream up
2016-05-29 19:38:49 +10:00
Peter Barker
bb19c57615
Copter: subclass GCS_MAVLink in place of defining its functions for it
2016-05-29 16:21:21 +10:00
Andrew Tridgell
a922b98ac0
Copter: use send_heartbeat wrapper
2016-05-21 15:25:18 +10:00
Andrew Tridgell
31866c66d8
Copter: always build with MAVLink2 headers
2016-05-21 15:25:15 +10:00
Andrew Tridgell
b85f129cc5
ArduCopter: handle SETUP_SIGNING message
2016-05-21 15:25:12 +10:00
Randy Mackay
7689315ba2
Copter: rename sonar to rangefinder
2016-05-21 10:36:53 +09:00
Randy Mackay
028946ae9e
Copter: rename CONFIG_SONAR to RANGEFINDER_ENABLE
2016-05-21 10:36:53 +09:00
Saloni Jain
bc22419286
Copter : Modified set_guided_destination() to reject requests for guided waypoints outside the fence.
2016-05-21 09:56:12 +09:00
Don Gagne
97d361333d
ArduCopter: SET_SENSORS_OFFSETS support for third compass
2016-05-19 18:51:17 -03:00
Andrew Tridgell
e4948544e7
Copter: cleanup unnecessarily complex gcs[] usage
2016-05-17 08:27:35 +10:00
Randy Mackay
0a2336a5a8
Copter: update solo-buttons to work with master
...
Change was due to addition of reason codes since PR was first submitted
2016-05-13 11:42:25 +09:00
Jonathan Challinger
67cd2bae08
Copter: implement SOLO_BTN commands
2016-05-13 11:42:25 +09:00
skyscraper
4980c8bc94
ArduCopter: RC_Channel refactor
...
More fixing up of RC_Channel change direct access to data members
to access via member functions.
2016-05-10 16:21:16 +10:00
Leandro Pereira
f23bd7e09d
GCS_MAVLink: Use a single stream_trigger() implementation
...
This has no side effects, but since all implementations were basically
the same, move the implementation to GCS_Common and the only part that
adjusts the rate based on which which stream to each individual
GCS_MAVLINK implementation.
2016-05-07 23:49:35 -03:00
Andrew Tridgell
874fae931f
Copter: fix for changed API
2016-05-07 18:27:22 +10:00
Lucas De Marchi
352e103f1a
ArduCopter: use separate header for version macro
...
Having the version macro in the config.h and consequently in the main
vehicle header means that whenever the version changes we need to
compiler the whole vehicle again. This would not be so bad if we weren't
also appending the git hash in the version. In this case, whenever we
commit to the repository we would need to recompile everything.
Move to a separate header that is include only by its users. Then
instead of compiling everything we will compile just a few files.
2016-05-06 13:11:28 -03:00
Allan Matthew
7960e3bb8f
Copter: pass DISTANCE_SENSOR messages to rangefinders
...
This allows the MAVLink range finder driver to intercept distance measurements
2016-05-04 12:10:58 +09:00
Michael du Breuil
e7974702d4
Copter: Ignore POSITION_TARGET_GLOBAL_INT
2016-05-01 07:38:24 +10:00
Michael Oborne
5848d8a5e6
ArduCopter: support MAVLINK_MSG_ID_MISSION_ITEM_INT
2016-05-01 07:13:46 +10:00
Randy Mackay
47658fe964
Copter: add terrain failsafe
2016-04-30 10:33:01 +09:00
Niti Rohilla
867360c350
ArduCopter : Updated handle_guided_request() to report error.
2016-04-29 12:39:28 -03:00
Randy Mackay
699816400e
Copter: ack DO_MOUNT_CONTROL messages
2016-04-22 21:30:49 +09:00
Lucas De Marchi
a310d3735e
ArduCopter: fix handling of SET_HOME_POSITION
...
Location.altitude is stored in cm.
2016-04-18 13:07:45 +10:00
Jonathan Challinger
1356deab8b
Copter: add control_mode_reason
2016-04-14 12:24:04 +09:00
Jonathan Challinger
a0ce8af633
Copter: use enum type for control_mode
2016-04-14 12:24:04 +09:00
Randy Mackay
1f20a5ef69
Copter: access angle and rate PIDs through attitude controller
2016-04-01 11:59:30 +09:00
Leonard Hall
a44f7f650b
Copter: throttle sent to GCS uses 0 to 1 range
...
This is probably not correct because we should be sending the throttle as a 0 to 1 number using the full possible output range. This uses the reduced range passed in when the copter is being stabilized (i.e. between throttle-min and throttle-max)
2016-04-01 11:59:30 +09:00
Nitay Megides
f77eed8f95
Copter: add break after prec landing case clause
...
(And fixed indentation)
2016-03-21 09:34:55 +09:00
Tom Pittenger
6568402b28
Copter: convert to using static send_statustext
...
- no more MSG_STATUSTEXT
- TODO: replace calls to gcs_send_text and gcs_send_text_fmt to GCS_MAVLINK::send_statustext()
2016-02-24 09:18:06 +11:00
Jonathan Challinger
e09e9a313e
Copter: interpret MAV_FRAME_GLOBAL_RELATIVE_ALT as MAV_FRAME_GLOBAL_RELATIVE_ALT_INT
2016-02-06 09:36:51 +09:00
Jonathan Challinger
0b8162aa0d
Copter: add support for COMMAND_INT DO_SET_ROI
2016-02-06 09:36:41 +09:00
Randy Mackay
a77dd59dc6
Copter: single and coax copters become mav_type quadrotor
2016-01-30 17:15:28 +09:00
Andrew Tridgell
5be21cc178
ArduCopter: log a picture if AP_Camera::control() returns true
2016-01-29 10:01:51 +11:00
Randy Mackay
27ed9e1561
Copter: allow mount to be disabled
2016-01-23 10:35:48 +09:00
Jonathan Challinger
22c3397657
Copter: make AP_Mount calls required by AP_Mount_SoloGimbal
2016-01-23 10:35:42 +09:00
Jonathan Challinger
5f610fdcba
Copter: support SET_POSITION_TARGET with WGS84 altitudes
2016-01-23 10:29:04 +09:00
Derek Ma
3751dbef91
ArduCopter: include precision landing sensor in mavlink system status
...
Set MAV_SYS_STATUS_SENSOR_VISION_POSITION bit in onboard_control_sensors_present, onboard_control_sensors_enabled and onboard_control_sensors_health based on the status of precision landing sensor.
2016-01-14 09:36:24 +09:00
Jonathan Challinger
cc1f27ad95
Copter: add DISALLOW_GCS_MODE_CHANGE_DURING_RC_FAILSAFE option
2016-01-12 19:49:17 +09:00
Jonathan Challinger
0e85f55cfc
Copter: remove OF_LOITER entirely
2015-12-31 14:27:22 +09:00
bugobliterator
9a976963aa
Copter: support AP_AccelCal
2015-12-29 10:46:34 -08:00
Jonathan Challinger
709fcf37cc
Copter: call renamed functions in AC_AttitudeControl
2015-12-09 19:58:49 +09:00
Robert Lefebvre
9848d05a9d
Copter: Always send RPM data when sensor is enabled
2015-12-08 08:25:18 +11:00
DonLakeFlyer
c8cc83505b
Copter: return success or failure of get home position
2015-12-07 12:33:15 +09:00
Peter Barker
826912c3e4
Copter: DataFlash-over-MAVLink support
2015-12-03 13:21:51 +11:00
Randy Mackay
19f5c8f209
Copter: remove debug comments
2015-11-27 16:17:00 +09:00
Luis Vale Gonçalves
3199829d45
Copter: revisions to text strings sent to GCS
2015-11-27 16:16:58 +09:00
Randy Mackay
4ef53427f2
Copter: allow ADSB to be disabled
2015-11-27 15:02:17 +09:00
Tom Pittenger
34d6d985e9
Copter: Add support for ADS-B
2015-11-27 15:02:15 +09:00
Caio Marcelo de Oliveira Filho
c7acc46d09
Copter: use millis/micros/panic functions
2015-11-20 12:26:31 +09:00
Randy Mackay
731c44d053
Copter: allow terrain to be excluded from build
2015-11-14 12:38:47 +09:00
Jonathan Challinger
05e533e6fc
Copter: don't accept disarm commands in stabilize and acro unless also landed
2015-11-07 11:07:14 +09:00
lvale
549695181c
Copter: revised and uniformization of severity messages
2015-11-05 12:20:49 +09:00
Lucas De Marchi
e0639ac029
ArduCopter: remove check for AVR CPUs
...
Remove the checks for HAL_CPU_CLASS > HAL_CPU_CLASS_16 and
HAL_CPU_CLASS >= HAL_CPU_CLASS_75. Corresponding dead code will be
removed on separate commits.
2015-11-04 12:14:15 +11:00
Lucas De Marchi
3e889b005f
ArduCopter: remove checks for HAL_BOARD_APM2 and HAL_BOARD_APM1
2015-11-04 12:14:13 +11:00
Lucas De Marchi
1b07dabeb7
Replace prog_char and prog_char_t with char
...
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.
AVR-specific places were not changed.
2015-10-30 14:35:30 +09:00
Lucas De Marchi
89fc4f4b62
Replace use of send_text_P() with send_text()
2015-10-30 14:35:17 +09:00
Lucas De Marchi
831d8acca5
Remove use of PROGMEM
...
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:
git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'
The 2 commands were done so we don't leave behind spurious spaces.
AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Lucas De Marchi
84da1f5039
Rename gcs_send_text_P to gcs_send_text
2015-10-30 14:35:07 +09:00
Lucas De Marchi
84d5fb006f
Remove use of Util::{v,}snprintf_P()
...
These are now the same function as Util::snprintf().
2015-10-30 14:35:05 +09:00
Lucas De Marchi
2c38e31c93
Remove use of PSTR
...
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.
This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.
AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Jonathan Challinger
da3961e4a6
Copter: support MAV_CMD_DO_SEND_BANNER
2015-10-26 16:28:57 +09:00
vooon
f3cbbef418
Copter: fix guided attitude type_mask check
2015-10-10 22:04:51 +09:00
Randy Mackay
e20038a453
Copter: support SET_ATTITUDE_TARGET in guided mode
2015-10-09 12:15:38 +09:00
Randy Mackay
1dcf58bc20
Copter: support set-home-position message
2015-10-03 12:51:32 +09:00
Randy Mackay
330961b524
Copter: send home position when home is set or get-home msg received
2015-10-03 12:50:45 +09:00
Andrew Tridgell
38bae40ca0
Copter: use ahrs.send_ekf_status_report()
2015-09-29 10:59:24 +10:00
Randy Mackay
f3d4b20a80
Copter: calibrate gyros during accel calibration
2015-09-21 17:06:37 +09:00
Randy Mackay
01c0b20930
Copter: calibrate gyros depending on INS GYR_CAL parameter
2015-09-21 17:06:34 +09:00
KiwiHC16
004c5b8416
Copter: mission_start always restarts mission
2015-09-16 17:17:20 +09:00
squilter
30ed2508d6
Copter: Support do_digicam_x via command_long
2015-09-16 13:06:49 +09:00
Daniel Nugent
3a7036fd67
Copter: pass LANDING_TARGET message to precland lib
2015-09-11 20:56:10 +09:00
Randy Mackay
8efc02fe0c
Copter: delay for 200ms instead of 50ms before reboot
2015-09-09 10:39:56 +09:00
Jonathan Challinger
1fbdf11eca
Copter: set firmware_update flag instead of event
2015-09-09 10:39:55 +09:00
Randy Mackay
dc4923a88d
Copter: suppressing comment for switch case fall through
2015-09-06 16:01:33 +09:00
Randy Mackay
5e38adfae3
Copter: remove support for configure as command long
...
Also protect mount calls with MOUNT definition
2015-09-06 16:01:21 +09:00
squilter
8320c06700
Copter: Support do-mount-control via command-long
2015-09-06 16:01:16 +09:00
Andrew Tridgell
fdb1cc38b0
Copter: removed redundent copter dereference
2015-09-03 16:59:24 +10:00
Siddharth Bharat Purohit
347d1f0a25
Copter: use handle message function for compass cal from compass library
2015-09-03 16:59:14 +10:00
Jonathan Challinger
1dc373fa20
Copter: correct compile errors after compass cal merge
2015-09-03 16:59:13 +10:00
Jonathan Challinger
eec5c2a5eb
Copter: send NACK if compass.start_calibration_all fails
2015-09-03 16:59:12 +10:00
Jonathan Challinger
2864d58474
Copter: refuse to start mag cal if armed
2015-09-03 16:59:12 +10:00
Jonathan Challinger
3739318d2f
Copter: Hook up compass calibrator
2015-09-03 16:59:11 +10:00
Randy Mackay
4cdb5bf2bd
Copter: sanity check do-set-home and do-set-ROI location
2015-08-27 15:16:04 +09:00
squilter
767b4da5b6
Copter: update send text severities
2015-08-25 14:05:25 +09:00
squilter
a11227af84
Copter: define and send FIRMWARE_VERSION
2015-08-21 22:40:52 +09:00
Tom Pittenger
87d0b12c7c
Copter: implement try send mission_item_reached
...
clean up unreachable code
2015-08-19 15:42:07 +10:00
squilter
a42674b0b0
Copter: implement do_flighttermination
2015-08-12 14:17:44 -07:00
Andrew Tridgell
1fdf7ec83f
Copter: added RPM sensor support
...
send result via MAVLink
2015-08-12 15:03:50 +10:00
Randy Mackay
7199b57fde
Copter: check frame for SET_POSITION_TARGET_GLOBAL_INT in guided
2015-08-11 16:41:17 -07:00
Randy Mackay
580c0ad9de
Copter: guided SET_POSITION_TARGET accepts frame
2015-08-11 16:41:11 -07:00
Randy Mackay
6765aedb5b
Copter: init vehicle capabilities
2015-07-31 14:50:29 +09:00
squilter
edf5ff1bbe
Copter: add capability bitmask
2015-07-31 14:50:15 +09:00
Randy Mackay
7935bf70f1
Copter: rc_override active only on non-zero overrides
...
Bug found by Kevin Hester
2015-07-22 17:32:30 +09:00
Randy Mackay
c62da52259
Copter: add gcs_send_mission_item_reached
2015-07-19 12:14:12 +09:00
Randy Mackay
af8b9e703c
Copter: fix compiler warning from pid_tuning_send call
2015-07-02 14:22:53 +09:00
Peter Barker
12bce49cd1
Copter: use common mission logging code
2015-06-30 16:23:35 +10:00
Andrew Tridgell
58b1702552
Copter: fixed pde paths
2015-06-16 09:59:39 +10:00
Randy Mackay
40ed2f7f53
Copter: send vibration in STREAM_EXTRA3
2015-06-12 21:36:45 +09:00
Eugene Shamaev
a3ddc49a70
Copter: added DSM bind support
2015-06-10 17:19:10 +10:00
Randy Mackay
ce1031a5bd
Copter: remove AP_AHRS_NAVEKF_AVAILABLE checks
...
Copter requires an EKF
2015-06-10 12:18:38 +09:00
Randy Mackay
7613964ecb
Copter: fix bug in which do-parachute command could start motor test
...
bug found by Coverity
2015-06-08 14:46:19 +09:00
Andrew Tridgell
278883c521
Copter: finished conversion to .cpp files
...
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2015-05-30 15:21:19 +09:00
Andrew Tridgell
356ece3402
Copter: rename .pde files to .cpp files
2015-05-30 15:21:15 +09:00