Randy Mackay
65adb78f31
Copter: increase default battery capacity to 3500mAh
2013-09-15 11:54:07 +09:00
Randy Mackay
0fa8e44377
Copter: remove cli eprom dump
2013-09-15 11:44:53 +09:00
Randy Mackay
0232b25f6e
Copter: update LED_MODE bitmask @values to always enable leds
2013-09-15 11:38:47 +09:00
Randy Mackay
ea3d388796
Copter: update release notes to add slow take-off
2013-09-13 20:53:39 +09:00
Andrew Tridgell
dd6a69f588
Plane: added WP_MAX_RADIUS parameter
...
useful when using AUTO_FBW_STEER for manual steering in competitions
2013-09-13 17:43:08 +10:00
Randy Mackay
daa0cb7914
Copter: enable motor slow start in auto mode
2013-09-13 14:32:19 +09:00
Andrew Tridgell
cc6acac1dd
Plane: added AUTO_FBW_STEER option
...
this is an unusual option that gives FBWA flight control in AUTO
mode. It is being added to support use of APM in an aerial robotics
competition where students need to pilot the plane, but they still
need waypoint triggering of payloads
2013-09-13 14:38:09 +10:00
Randy Mackay
98a2ffd65c
Copter: remove redundant reset_i_all from startup
2013-09-13 12:30:25 +09:00
Andrew Tridgell
387b6afed4
autotest: ensure JSBSim is dead at start of testing
2013-09-13 13:22:00 +10:00
Andrew Tridgell
8b2c9557c7
Rover: changed to AP_Vehicle.h
2013-09-13 11:47:13 +10:00
Andrew Tridgell
3720efc7c9
Copter: changed to AP_Vehicle.h
2013-09-13 11:47:03 +10:00
Andrew Tridgell
de7b42e323
Plane: changed to AP_Vehicle.h
2013-09-13 11:46:54 +10:00
Andrew Tridgell
db7f43ea9f
VARTest: changed to AP_Vehicle.h
2013-09-13 11:46:42 +10:00
Andrew Tridgell
9be02fb493
AC_Fence: changed to AP_Vehicle.h
2013-09-13 11:46:32 +10:00
Andrew Tridgell
fbe4be94cf
APM_Control: changed to AP_Vehicle.h
2013-09-13 11:46:22 +10:00
Andrew Tridgell
15a4582ed7
AP_AHRS: changed to AP_Vehicle.h
2013-09-13 11:46:10 +10:00
Andrew Tridgell
2e742582e4
AP_Airspeed: changed to AP_Vehicle.h
...
also allow updates to ARSPD_RATIO from user while autocal is running
2013-09-13 11:45:57 +10:00
Andrew Tridgell
23fc6f8aed
AP_HAL_AVR: changed to AP_Vehicle.h
2013-09-13 11:45:24 +10:00
Andrew Tridgell
c64950e4f5
AP_InertialNav: changed to AP_Vehicle.h
2013-09-13 11:45:10 +10:00
Andrew Tridgell
a67413d495
AP_Mount: changed to AP_Vehicle.h
2013-09-13 11:44:54 +10:00
Andrew Tridgell
645eb711cb
DataFlash: changed to AP_Vehicle.h
2013-09-13 11:44:42 +10:00
Andrew Tridgell
16d2ad9796
AP_TECS: changed to AP_Vehicle.h
2013-09-13 11:44:31 +10:00
Andrew Tridgell
30ebcd36ac
AP_SpdHgtControl: removed AircraftParameters
2013-09-13 11:44:19 +10:00
Andrew Tridgell
79a4bc6ea4
AP_Vehicle: added new header for parameters in multiple libraries
...
this adds a header where we can put vehicle specific parameters that
will be used in multiple libraries
2013-09-13 11:43:59 +10:00
Andrew Tridgell
5bef6dd539
AP_Motors: fixed example build
2013-09-13 10:53:53 +10:00
Andrew Tridgell
cc4fad23d9
AP_Airspeed: updates for Pixhawk
2013-09-13 10:48:57 +10:00
Andrew Tridgell
2990359043
PX4: Implement accurate ratiometric voltage reading on Pixhawk
...
this uses the monitoring of the 5V rail to compensate for changes in
the 5V reference versus the 3.3V ADC reference. It reduces the noise
on ratiometric sensors by a factor of about 6x.
2013-09-13 10:48:57 +10:00
Randy Mackay
b4b2128977
Copter: update @Range comments for THR_MIN
...
This should help reduce change of someone setting THR_MIN above 300 (30%
throttle)
2013-09-12 22:45:18 +09:00
Randy Mackay
c5bd1a76ed
Copter: comment update re low battery event
2013-09-12 22:41:28 +09:00
Randy Mackay
0a047ae1c1
Copter Motors: increased spin-when-armed to 70
...
Changed choices to be displayed in ground stations
2013-09-12 22:36:04 +09:00
Randy Mackay
653a5036ae
Copter: #define for initial altitude jump during take-off
...
Developers can add a line like to APM_Config.h to reduce the initial
jump when taking off in Loiter or AltHold flightmodes:
#define ALT_HOLD_TAKEOFF_JUMP 0
2013-09-12 22:31:42 +09:00
Randy Mackay
072b231c3f
Copter: integrate slow start feature
2013-09-12 22:29:53 +09:00
Randy Mackay
36bbed8fdd
Copter: removed calls to set motor's max throttle
2013-09-12 22:28:38 +09:00
Randy Mackay
62cb5c172b
Copter Motors: add slow start feature
...
Combined armed, frame orientation and slow_start into flags bitmask
Removed ability to set max throttle because it was never used
Re-ordered class variables
2013-09-12 22:27:44 +09:00
Randy Mackay
ac98644405
Sprayer: minor change to flags type
2013-09-12 22:24:14 +09:00
Andrew Tridgell
1f84399704
autotest: small adjustment to rover parameters
2013-09-12 20:43:14 +10:00
Andrew Tridgell
bc3249fada
SITL: fixed Vcc voltage
2013-09-12 16:34:38 +10:00
Andrew Tridgell
3a3cecf5ff
PX4: support getting servorail voltage from ORB
2013-09-12 16:28:06 +10:00
Andrew Tridgell
8010d7fd78
Plane: update battery pin docs
2013-09-12 13:43:22 +10:00
Andrew Tridgell
adc923b989
Copter: update battery pin docs
2013-09-12 13:43:15 +10:00
Andrew Tridgell
d9fe0552f0
Copter: allow Vcc checks on Pixhawk
2013-09-12 13:43:06 +10:00
Andrew Tridgell
5c639b8b9f
Rover: update battery pin docs
2013-09-12 13:42:48 +10:00
Andrew Tridgell
457ca0b57d
AP_ADC_AnalogSource: fixed APM1 build
2013-09-12 13:28:11 +10:00
Andrew Tridgell
fe5a4ab710
Plane: fixed Vcc
2013-09-12 13:26:27 +10:00
Andrew Tridgell
7c62736e59
Copter: fixed Vcc
2013-09-12 13:26:19 +10:00
Andrew Tridgell
6ab9b0b91b
Rover: fixed Vcc
2013-09-12 13:26:12 +10:00
Andrew Tridgell
fb56feb6b2
HAL_PX4: support all analog input pins, with scaling
...
this allows voltage/current/Vcc sensing on FMUv2
2013-09-12 13:26:00 +10:00
Andrew Tridgell
a80d3344f5
AP_HAL_AVR: support voltage_latest()
2013-09-12 13:25:17 +10:00
Andrew Tridgell
a587b1140a
AP_HAL: added voltage_latest() interface
...
this will be used for reading the 5V rail
2013-09-12 13:23:04 +10:00
Andrew Tridgell
4f33e4e114
autotest: fixed handling for wiki and xml generation
2013-09-12 10:01:30 +10:00
