Andrew Tridgell
2c8240dbb4
VibTest: fixed gyro timestamps in logs
...
it was using the accel timestamps
2014-07-09 08:10:09 +10:00
Andrew Tridgell
d50d5b8f24
VibTest: fixed sample count output on console
2014-07-08 10:59:30 +10:00
Andrew Tridgell
03770c4d34
VibTest: added gyro data and support 3 sensors
...
will be used for vibration testing on FMUv3
2014-07-08 10:07:58 +10:00
Andrew Tridgell
ca12592448
AP_InertialSensor: allow for 3 accels and 3 gyros on Pixhawk
...
this supports FMUv3
2014-06-30 07:58:27 +10:00
Andrew Tridgell
ece01da10e
AP_InertialSensor: fixed _dump_registers() for MPU6000
...
need to take the semaphore to prevent bus errors
2014-06-29 12:11:21 +10:00
LukeMike
8f552d5758
VRBRAIN: Changed the management of VirtualRobotix's boards.
2014-06-19 11:27:38 +02:00
Andrew Tridgell
4c43cd9775
AP_InertialSensor: fixes for HAL_GPIO_*
2014-06-02 10:42:35 +10:00
Andrew Tridgell
65fd25fb5a
AP_InertialSensor: fixed example build
2014-05-18 08:08:19 +10:00
Andrew Tridgell
8533aecf18
AP_InertialSensor: fixed example build
2014-05-16 21:24:25 +10:00
Andrew Tridgell
086142580a
AP_InertialSensor: added VibTest sketch
...
logs all accel data at high rate to SD card
2014-05-15 21:14:21 +10:00
Emile Castelnuovo
06744ea7d2
AP_InertialSensor: new files and definitions for VRBRAIN board
2014-04-08 16:19:19 +10:00
Andrew Tridgell
2763393908
AP_InertialSensor: fixed some compiler warnings
2014-03-24 12:52:16 +11:00
Andrew Tridgell
731f980327
AP_InertialSensor: fixed example build
2014-03-19 12:13:47 +09:00
Jonathan Challinger
e81d2e9584
AP_InertialSensor: Correct out-of-bounds array access that was causing SITL to crash
2014-02-28 17:25:54 +11:00
Andrew Tridgell
2c85a7ba56
AP_InertialSensor: expose get_primary_accel() for use in AHRS
2014-02-27 16:27:46 +11:00
Andrew Tridgell
840f1b9a1e
AP_InertialSensor: make HIL timing more accurate
...
needed for 400Hz replay
2014-02-27 08:10:42 +11:00
Andrew Tridgell
6732d6c79b
AP_InertialSensor: enable get_accel_count() and get_gyro_count() APIs for HIL
2014-02-23 19:10:07 +11:00
Andrew Tridgell
0e18079c47
AP_InertialSensor: allow HIL sensors to support multiple instances
...
this allows log replay to test both sets of sensors on a Pixhawk log
2014-02-23 08:16:33 +11:00
Randy Mackay
33fe778cdd
InertialSensor_PX4: resolve compiler warning
2014-02-21 13:53:34 +09:00
Andrew Tridgell
fe0cb23733
AP_InertialSensor: fixed HIL for 400Hz INS
2014-02-19 10:29:00 +11:00
Mike McCauley
2c94a40310
AP_InertialSensor: AP_InertialSensor_Flymaple Remove unnecessary
...
comment
2014-02-17 05:56:37 +11:00
Mike McCauley
dd6abb49a9
AP_InertialSensor: AP_InertialSensor_Flymaple::healthy() was required after
...
all.
2014-02-17 05:56:37 +11:00
Mike McCauley
0a43cf8c5c
AP_InertialSensor: AP_InertialSensor_Flymaple removed redundant definition of
...
healthy().
2014-02-17 05:56:37 +11:00
Mike McCauley
f7279aa13f
AP_InertialSensor: AP_InertialSensor_Flymaple implement get_gyro_health
...
and get_accel_health.
2014-02-17 05:56:37 +11:00
Andrew Tridgell
f9d0747750
AP_InertialSensor: fixed example build
2014-02-15 06:39:35 +11:00
Andrew Tridgell
3617c65af7
AP_InertialSensor: make HIL treat time like PX4 does
2014-02-15 05:48:20 +11:00
Andrew Tridgell
b1c5f23bbd
AP_InertialSensor: make get_delta_time() const
...
allows use from AP_NavEKF
2014-02-15 05:29:47 +11:00
Randy Mackay
b7565affcd
INS: add support for 400hz for PX4
2014-02-15 05:27:33 +11:00
Andrew Tridgell
a95a3142e0
AP_InertialSensor: use fixed size arrays
...
apparently helps SITL build on MacOS
2014-02-08 19:32:26 +11:00
Andrew Tridgell
045efdb084
AP_InertialSensor: fixed example builds
2014-01-30 13:33:38 +11:00
Andrew Tridgell
58d3729d16
AP_InertialSensor: fixed default health functions
...
this fixes INS on APM1. Thanks to Mike McCauley for noticing this!
2014-01-22 22:08:28 +11:00
Don Gagne
68b3b31499
Param doc typo
2014-01-18 10:18:58 +09:00
Randy Mackay
965e5b2dfd
INS: check for good calibration for 10seconds
...
Shortened gyro calibration commit also halved the total time we would
look for a good gyro calibration. This restores the total time to 10
seconds.
2014-01-17 12:48:11 +09:00
Randy Mackay
1f76ada9dd
INS: shortened gyro calibration
...
Removed delays before calibration, reduced number of samples taken,
widened convergence criteria
2014-01-16 13:40:49 +09:00
Randy Mackay
a400ddeb88
INS: replace APM with vehicle in accel calibrate
2013-12-28 10:41:49 +09:00
Andrew Tridgell
8dd34f8bc4
AP_InertialSensor: fixed example build
2013-12-17 11:51:37 +11:00
Andrew Tridgell
6d39cf5e49
AP_InertialSensor: another attempt at fixing the spurious bad gyro health warnings
...
cope with _get_sample() not being called for a while
2013-12-14 15:47:49 +11:00
Andrew Tridgell
99e2dc87c9
AP_InertialSensor: prevent INS healthy errors while initialising
...
during gyro cal we shouldn't mark the gyro unhealthy
2013-12-13 20:47:24 +11:00
Andrew Tridgell
23a112c5d5
AP_InertialSensor: reduce the number of format string warnings
2013-12-11 17:29:27 +11:00
Andrew Tridgell
433ad19335
AP_InertialSensor: fixed loop limits
...
stops pointless operations
2013-12-11 14:57:13 +11:00
Andrew Tridgell
e54fc6b8e3
AP_InertialSensor: make sure we wait for a sample before update()
2013-12-11 13:50:50 +11:00
Andrew Tridgell
cba0cb963a
AP_InertialSensor: auto-failover to working gyro and accel
2013-12-09 20:02:04 +11:00
Andrew Tridgell
a0688a69d4
AP_InertialSensor: generalise the accel/gyro calibration for N sensors
2013-12-09 17:34:06 +11:00
Andrew Tridgell
d9b6f7f0f7
AP_InertialSensor: implement up to two sensors on PX4
2013-12-09 17:34:05 +11:00
Andrew Tridgell
2753449e75
AP_InertialSensor: added support for multiple accel/gyro devices
...
this makes it possible to ask for the gyro and accel vectors from
secondary INS devices.
2013-12-09 17:34:05 +11:00
Randy Mackay
fd9b115d01
INS: move Product ID to @User Advanced
2013-11-26 22:18:28 +09:00
Andrew Tridgell
71bb462ad0
AP_InertialSensor: use fabsf()
2013-11-15 10:43:10 +11:00
Andrew Tridgell
aef9289476
AP_InertialSensor: added INS_PRODUCT_ID values
2013-11-15 10:43:10 +11:00
Andrew Tridgell
f10a4b04ae
AP_InertialSensor: make PX4 healthy call _get_sample()
...
this prevents a false positive during times like arming where we are
not reading the sensors
2013-11-10 17:03:16 +11:00
Andrew Tridgell
80def01fbe
AP_InertialSensor: fixed semaphore error on startup for MPU6000
2013-11-09 11:26:50 +11:00
Andrew Tridgell
f5299e2e11
AP_InertialSensor: added healthy check for PX4 and HIL
...
used to detect bad accels
2013-11-07 13:53:59 +11:00
Andrew Tridgell
9ecd889e9d
AP_InertialSensor: detect bad MPU6000 SPI transactions and lower bus speed
...
this uses bad data or bad INT_STATUS values from the MPU6000 to detect
the sensor running too fast and lower bus speed
2013-11-07 12:48:17 +11:00
Andrew Tridgell
b98bcbf715
AP_InertialSensor: automatically lower bus speed on mpu6k bad reads
2013-11-07 12:48:16 +11:00
Andrew Tridgell
bdc40cc7df
AP_InertialSensor: try to lower SPI bus speed on errors
2013-11-07 12:48:16 +11:00
Andrew Tridgell
1cd070a2e7
AP_InertialSensor: use const reference returns
...
saves some vector copies
2013-11-04 21:21:42 +11:00
Andrew Tridgell
f4dde44b8d
AP_InertialSensor: SITL doesn't use Oilpan code any more
2013-11-02 21:41:11 +11:00
Mike McCauley
fe6cacf081
AP_InertialSensor: Minor correction to comments in AP_InertialSensor_Flymaple.cpp
2013-10-14 11:34:47 +10:00
Andrew Tridgell
7831113f84
AP_InertialSensor: yield the CPU for the right time in wait_for_sample()
...
this improves timing performance
2013-10-14 08:45:58 +11:00
Andrew Tridgell
8532e2bff8
AP_InertialSensor: fixed timing of PX4 sensor samples
2013-10-13 22:15:50 +11:00
Andrew Tridgell
9833900f91
AP_InertialSensor: run MPU6000 sensor register reads at 8MHz
...
run other register IO at 500kHz
2013-10-13 11:03:08 +09:00
Andrew Tridgell
b3af59cc0c
AP_InertialSensor: don't build L3G4200D example
2013-10-10 09:54:20 +11:00
Andrew Tridgell
a04c056598
AP_InertialSensor: remove unused get_last_sample_time_micros()
2013-10-10 09:54:19 +11:00
Andrew Tridgell
5d685385eb
AP_InertialSensor: use gyro sample count on L3G4200D
...
this gives more even timing in ArduCopter
2013-10-08 19:20:34 +11:00
Andrew Tridgell
6444b0bddd
AP_InertialSensor_L3G4200D: a sample is only available if gyro had a sample
2013-10-08 19:20:34 +11:00
Andrew Tridgell
e5e4cdee18
AP_InertialSensor: added wait_for_sample() API call
...
this waits for a new INS sample to arrive, using whatever method is
most efficient on each INS type
2013-10-08 17:31:15 +11:00
Andrew Tridgell
c17a5e5ed1
AP_InertialSensor: added a small delay in accel calibration
...
allows threads to run on Linux
2013-10-08 11:50:54 +11:00
Andrew Tridgell
12af23bb7c
AP_InertialSensor: added L3G4200D example
2013-10-08 11:50:53 +11:00
Andrew Tridgell
1aabd7155e
AP_InertialSensor: added L3G4200D driver
...
this is for a cheap ebay 10DOF sensor
2013-10-08 11:50:53 +11:00
Mike McCauley
c90c1b9998
AP_InertialSensor: Improvements to Flymaple sensors
...
Fix a bug that caused hang after 71 minutes. Use I2CDriver semaphore.
Remove test for in_accumulate: not needed.
2013-10-04 07:21:55 +10:00
Mike McCauley
9ea1108d4e
AP_InertialSensor: Flymaple filter constructor arguments non non-zero
2013-10-04 07:21:55 +10:00
Andrew Tridgell
dda68bddcb
AP_InertialSensor: updates for AP_HAL::MemberProc
2013-09-30 21:06:42 +10:00
Andrew Tridgell
1191607036
AP_InertialSensor: enable Oilpan on Linux
2013-09-29 00:57:13 +10:00
Andrew Tridgell
cf726c6642
AP_InertialSensor: rename Stub to HIL
...
more consistent with other drivers
2013-09-28 22:04:15 +10:00
Andrew Tridgell
03036c632d
AP_InertialSensor: use new scheduler API
2013-09-28 21:24:03 +10:00
Andrew Tridgell
096660c4f9
AP_InertialSensor: mark flymaple as nobuild
...
won't build with build_examples.sh script
2013-09-27 16:57:13 +10:00
Mike McCauley
e4eef61ec3
AP_InertialSensor: Flymaple sensors improvements
...
Flymaple sensors are now raw sampled at 800Hz, and LowPassFilter2p is used
to filter to the desired filter cutoff frequency.
Flymaple sensor polling is done in the main thread NOT in the timer
interrupts.
2013-09-27 15:45:59 +10:00
Mike McCauley
23429b6b9c
AP_InertialSensor: Flymaple now polls sensors at 800Hz. More changes to
...
come...
2013-09-27 15:45:57 +10:00
Mike McCauley
29bced05bd
AP_InertialSensor: Added examples/Flymaple for testing
2013-09-27 15:45:54 +10:00
Mike McCauley
d11f952ef1
AP_InertialSensor: Formalise and document Flymaple Gyro scaling factor
2013-09-27 15:45:52 +10:00
Mike McCauley
adfcdca074
AP_HAL_FLYMAPLE: Sensor reading improvements
...
I2C speed increased to 400kHz
Accelerometer 8g max, Normal power, 800Hz bandwidth
Gyros: 2000 degrees/sec, 256Hz LPF, 8kHz internal sample rate
2013-09-27 15:45:47 +10:00
Randy Mackay
f7ba0438ef
InertialSensor: remove DMP
...
this saves 3K of flash
2013-09-27 10:43:33 +09:00
Andrew Tridgell
14636e1cdf
AP_InertialSensor: changed num_samples_available() to sample_available()
...
this makes the interface clearer. It also fixes a 3D accel cal bug.
2013-09-27 10:49:00 +10:00
Andrew Tridgell
1ec5cbed81
AP_InertialSensor: removed SMACCM support
2013-09-26 22:38:31 +10:00
Mike McCauley
e4b5d0a3d6
AP_InertialSensor: Final Flymaple orientation fixes
2013-09-25 15:46:07 +10:00
Mike McCauley
276068356e
AP_InertialSensor: Further Flymaple orientation fixes
2013-09-25 15:46:07 +10:00
Mike McCauley
b02dbca9d4
AP_InertialSensor: fix orientation of Flymaple sensors
2013-09-25 15:46:07 +10:00
Mike McCauley
4d10a96077
AP_InertialSensor: Add flymaple support
2013-09-24 13:51:27 +10:00
Andrew Tridgell
770b7b5901
AP_InertialSensor: prevent a lockup in MPU6000 driver
...
thanks to the VRBrain port for noticing this bug.
Failing to get the semaphore is an expected error with the MPU6000, as
we read data both from timer context and mainline code. That means
semaphore conflicts are inevitable. We shouldn't consider them an
error, and shouldn't panic when some arbitrary number of them have
happened since boot.
Instead the wait_for_sample() code checks that we receive new data at
least every 50ms. That is a much safer test.
2013-09-23 22:48:36 +10:00
Andrew Tridgell
4d2bfe1078
AP_InertialSensor: fixed another example build
2013-09-19 21:09:34 +10:00
Andrew Tridgell
e1aa6e3ff1
libraries: fixed examples for no flash_leds() callback
2013-09-19 18:38:28 +10:00
Andrew Tridgell
f8e9d48a76
AP_InertialSensor: removed the flash_leds() callback
...
AP_Notify now handles this
2013-09-19 18:32:19 +10:00
Andrew Tridgell
7b3a674d66
AP_InertialSensor: added set_default_filter() method
2013-09-09 19:18:52 +10:00
Andrew Tridgell
396c4f30d2
AP_InertialSensor_PX4: don't set QUEUEDEPTH
...
the default of 2 samples is fine
2013-09-09 18:04:40 +10:00
Andrew Tridgell
8b80beadc4
PX4: make FMUv2 identify itself differently
...
so we can tell which is which in logs
2013-09-09 18:04:40 +10:00
Andrew Tridgell
ff0f6bcd42
AP_InertialSensor: fixed example build
2013-09-07 21:03:59 +10:00
Andrew Tridgell
5caf2e0ea4
AP_InertialSensor: fixed example build
2013-08-30 13:01:39 +10:00
Andrew Tridgell
65a490c209
AP_InertialSensor: update for new notify API
2013-08-30 13:01:35 +10:00
Randy Mackay
5651bdbe3a
INS: integrate AP_Notify
2013-08-30 13:01:35 +10:00
Andrew Tridgell
e5ad9dbd15
AP_InertialSensor: switch PX4 driver to fixed time per sample model
...
this makes the driver much simpler, and does away with the need for an
accumulate function
2013-08-30 13:01:33 +10:00
Andrew Tridgell
38fe89d661
AP_InertialSensor: switch to non-averaging system for PX4 IMUs
...
always use the latest value, based on a lowpass filter in the driver
2013-08-30 13:01:33 +10:00
Andrew Tridgell
46c5d18585
AP_InertialSensor: disable averaging on FMUv2
...
the new filter from Leonard means we shouldn't average values, and
instead just use the last value
2013-08-30 13:01:33 +10:00
Julian Oes
c3b27629ec
AP_InertialSensor: run PX4 FMUv2 at 800Hz
...
this gives much better noise suppression
2013-08-30 13:01:33 +10:00
Randy Mackay
effc829790
INS: relax accel offset check to 3.5 m/s/s
...
One user, Dusty, has found that even with offsets of 3.1 m/s/s
successful alt hold and loiter are possible
2013-07-13 10:43:07 +09:00
Randy Mackay
20ed00dcc9
AP_InertialSensor: relax accel offset sanity check
2013-06-25 14:19:42 +09:00
Andrew Tridgell
c92069644d
AP_InertialSensor: fixed indent-tabs-mode
2013-05-30 09:52:12 +10:00
Andrew Tridgell
807dbf9786
AP_InertialSensor: fixed a build warning
2013-05-24 11:21:42 +10:00
Andrew Tridgell
59b6118a1d
AP_InertialSensor: fixed parameter markup
2013-05-21 17:02:13 +10:00
Andrew Tridgell
fefbeacf86
AP_InertialSensor: use SEVERITY_USER_RESPONSE for accel cal messages
...
thanks to the suggestion from Kevin
2013-05-09 09:28:25 +10:00
Andrew Tridgell
8f57b72e3f
AP_InserialSensor: fixed example build
2013-05-08 16:45:31 +10:00
Andrew Tridgell
2ddeaa7f4d
AP_InertialSensor: show calibration offsets for success and failure
...
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2013-05-08 16:19:06 +10:00
Andrew Tridgell
f3f4b7205c
AP_InsertialSensor: added support for MAVLink user interaction
...
allows APM to ask user to print enter to continue via MAVLink messages
during accel calibration
2013-05-08 16:18:40 +10:00
Andrew Tridgell
99d21854f9
SITL: fixed drift rate limit in simulator
2013-05-04 15:16:35 +10:00
Randy Mackay
42bca90676
INS: add calibrated check
...
Checks is the scaling vector has been updated. Required for pre-arm
checks for ArduCopter
2013-04-22 23:55:53 +09:00
Andrew Tridgell
17d7f1fbe5
AP_InertialSensor: make some interfaces const
2013-04-20 13:52:36 +10:00
Andrew Tridgell
76e20150e9
AP_InertialSensor: ensure parent class is initialised in instance classes
2013-04-12 14:30:35 +10:00
Randy Mackay
86fe79a662
INS: updated MPU6K_FILTER parameter description
2013-04-10 00:14:53 +09:00
Andrew Tridgell
8d992ae615
InertialSensor: added OilPan INS example
2013-04-08 07:07:25 +10:00
Randy Mackay
af13f6795c
INS: switch to global definition of GRAVITY_MSS
...
saves 4 bytes of RAM
2013-04-05 22:57:46 +09:00
Randy Mackay
777c6a308e
AP_InertialNav: use shared GRAVITY_MSS constant
2013-04-05 11:48:41 +09:00
Michael Oborne
87292e0a4a
Init hil accel with gravity
2013-03-31 16:38:48 +08:00
Randy Mackay
318a831b57
INS: set default filter to 20hz for APM2.x and PX4
2013-03-01 19:35:34 +09:00
Randy Mackay
963231a19b
AHRS: fix example sketch to use roll/pitch trim
2013-02-19 18:56:09 +09:00
Randy Mackay
21de9f5f47
AP_InertialSensor: return roll and pitch trim angles
2013-02-19 12:45:44 +09:00
Andrew Tridgell
a63275d284
AP_InertialSensor: expand register range in MPU6000 _dump_registers()
2013-02-13 19:33:40 +11:00
zlite
4800c57fb4
Fixed cosmetic typo in user display message
...
Corrected "it's" to "its". Just one of those grammar things that drives me crazy ;-)
2013-02-06 16:34:33 -08:00
Andrew Tridgell
1121254606
AP_InertialSensor: added filter frequency support to PX4 driver
2013-02-07 11:20:45 +11:00
Andrew Tridgell
5643c371b9
AP_InertialSensor: removed unused new_data_available() and temperature() APIs
2013-02-07 10:23:37 +11:00
Andrew Tridgell
7b1245937c
AP_InertialSensor: always sample at 200Hz in MPU6000
...
this changes the sampling to 200Hz regardless of requested rate, and
it is downsampled inside num_samples_available() using a shift. This
gives better noise resistance in ArduPlane.
This patch also makes it possible to update the filter frequency while
running, which is very useful for bench testing with a vibration
source
2013-02-07 10:23:08 +11:00
Randy Mackay
6f5050a8b9
Copter: minor casting fixup for wp_distance
2013-01-27 11:27:43 +09:00
Randy Mackay
bad81a5113
AP_InertialSensor_MPU6k: remove unnecessary check of sign when receiving fifo packet from dmp
2013-01-27 11:22:39 +09:00
Andrew Tridgell
f60d657f72
AP_InertialSensor: added timer for accumulating samples for PX4
...
this makes the driver much more tolerant of sketch timing errors
2013-01-21 21:51:32 +11:00
Andrew Tridgell
3d0cb755d2
AP_InertialSensor: user a timer to drive data collection on PX4
...
this reduces the chance of missing a sample if the main sketch is a
bit slow
2013-01-21 19:44:01 +11:00
Andrew Tridgell
16d72ca160
AP_InertialSensor: update PX4 driver to use read() method
2013-01-20 22:13:20 +11:00
James Bielman
5631f865b2
Update floating point calculations to use floats instead of doubles.
...
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
2013-01-16 13:52:01 +11:00
Andrew Tridgell
d844a1ba3c
AP_InertialSensor: fixed PX4 example build
2013-01-13 21:10:53 +11:00
Andrew Tridgell
d7996acdf7
AP_InertialSensor: added set_board_orientation() method
2013-01-13 17:32:48 +11:00
Andrew Tridgell
6142eac4b4
AP_InertialSensor: simplify get_delta_time() API
...
use a single float return rather than two APIs.
This also changes the MPU6k driver to match the new 2.9 behaviour of
using the MPU6k sample timing instead of micros()
2013-01-11 21:17:21 +11:00
Andrew Tridgell
2fe4656a50
Merge pull request #4 from GaloisInc/master
...
Thanks Pat!
2013-01-10 17:24:59 -08:00
Pat Hickey
910e09fc96
AP_InertialSensor_MPU6000: fix sync/async semaphore usage with new scheduler
2013-01-10 14:12:19 -08:00
Andrew Tridgell
dbad61816b
AP_InertialSensor: only build Oilpan driver on APM1
2013-01-10 21:01:55 +11:00
James Bielman
8e38ef6567
MPU6000: Flip Y and Z axes for SMACCM_HAL.
...
- The accelerometer is upside-down on the PX4FMU vs the APM2.
2013-01-09 11:19:51 -08:00
James Bielman
1309b7332a
MPU6000: Use signed addition when accumulating readings.
...
- Fixes very erratic accel readings on the PX4 board.
2013-01-09 11:19:51 -08:00
Andrew Tridgell
f48790a56e
AP_InertialSensor: poll for new data in num_samples_available()
...
this lowers the latency for new data
2013-01-09 20:31:09 +11:00
Andrew Tridgell
4ab1cddd15
AP_InertialSensor: ensure we always have the SPI semaphore for MPU6k
2013-01-09 20:30:20 +11:00
Andrew Tridgell
b39166b71a
MPU6000: fixed minor timing bug
...
if we miss a sample due to SPI contention we shouldn't update last
sample time
2013-01-07 11:07:29 +11:00
Andrew Tridgell
fd23f6bd33
InertialSensor: added PX4 example sketch
2013-01-04 14:26:14 +11:00
Andrew Tridgell
ae09b31176
AP_InertialSensor: added PX4 gyro/accel driver
2013-01-04 14:25:57 +11:00
James Bielman
d84ba8ef59
Use HAL suspend/resume timer procs rather than atomic.
...
- Preparation for removing begin/end atomic.
2013-01-03 17:33:13 -08:00
Pat Hickey
d808c19c10
AP_InertialSensor_MPU6000: uses new semaphores
...
* some refactoring to fix differences between timerprocess
and non-timerprocess usage
2013-01-03 13:48:07 -08:00
James Bielman
acf05a29ee
AP_InertialSensor_MPU6000: Poll status register if there is no data ready pin.
2013-01-03 13:48:06 -08:00