Randy Mackay
efc02161c4
Copter: add safe switch arming check
2013-10-05 22:23:53 +09:00
Randy Mackay
ba92c4891a
Copter: make AutoTune a compile-time option
2013-10-04 15:50:50 +09:00
Randy Mackay
31cea0140d
Copter: Leonard's AutoTuning for Roll and Pitch
2013-10-04 15:50:47 +09:00
Randy Mackay
a53d28e018
Copter: remove support for dmp ahrs
2013-09-27 10:42:49 +09:00
Andrew Tridgell
d9fe0552f0
Copter: allow Vcc checks on Pixhawk
2013-09-12 13:43:06 +10:00
Randy Mackay
a68966e077
Copter: integrate sprayer pump test
2013-09-11 17:05:25 +09:00
Randy Mackay
1d55fa6818
Copter: add arm check of GPS hdop when in Loiter
2013-09-09 14:03:40 +09:00
Randy Mackay
52ef77393c
Copter: integrate Toshiba_LED_PX4
2013-08-30 13:01:35 +10:00
Randy Mackay
e985253f1a
Copter: integrate notify
2013-08-30 13:01:35 +10:00
Randy Mackay
fe56ac3839
Copter: only allow auto_trim in STABILIZE
2013-08-15 21:11:23 +09:00
Randy Mackay
34e874282e
Copter: only check hdop when circular fence enabled
2013-08-15 16:03:57 +09:00
Randy Mackay
d000967a76
Copter: pre-arm check for gps hdop < 2
2013-08-15 13:06:36 +09:00
Randy Mackay
6969ab573d
Copter: configurable max lean angle
...
ANGLE_MAX parameter allows limiting the roll and pitch angles during
manual and auto flight modes to anywhere from 10 to 80 degrees
2013-08-11 12:53:22 +09:00
Randy Mackay
39ab4f62ef
Copter: add SPORT mode
2013-08-05 21:04:41 +09:00
Olivier-ADLER
87d062905e
Copter: 3 positions switch support for CH7 and CH8 - new 3 positions SIMPLE / SUPERSIMPLE mode
...
3 positions modes must use mode number >= 100
pre-arm check correction for CH7 - CH8 check
2013-07-29 15:12:10 +09:00
Randy Mackay
c173f0c7d9
Copter: change CH7/CH8 pre-arm check string
2013-07-29 14:32:27 +09:00
Randy Mackay
dbc18ee900
Copter: allow arming in AltHold and Loiter if landed
2013-07-28 18:18:47 +09:00
Olivier-ADLER
bf6120d8b7
Copter: Move CH7 - CH8 check from read_aux_switches() to pre_arm_checks.
...
Moving this to pre-arm checks save some processing time and is safer.
2013-07-26 09:30:24 +09:00
Randy Mackay
e6412b6996
Copter: do not spin motors during arming process
2013-07-16 12:47:57 +09:00
Jonathan Challinger
9f51a4a4f7
Copter: Cancel arming if throttle input above cruise_throttle.
2013-07-16 12:47:55 +09:00
Jonathan Challinger
2725f219cb
Copter: Warn user with motors while copter is arming
2013-07-16 12:47:51 +09:00
Randy Mackay
2b5f6e2668
Copter: pre-arm checks for rc ch 1~4 min and max
2013-07-13 21:38:22 +09:00
Randy Mackay
213472102c
Copter: pre-arm check of throttle failsafe value
...
Check throttle min is above throttle failsafe trigger and that trigger
is above ppm encoder's loss-of-signal value of 900
2013-07-13 20:25:34 +09:00
Randy Mackay
ed3bf2c1e7
Copter: relax pre-arm checks for mag field
...
previously it was 50% ~ 150% of expected mag field but now expanded to
35% ~ 165%.
2013-07-07 18:00:36 -10:00
Randy Mackay
79d2fe6271
Copter: double flash arming light when pre-arm checks fail
...
Hardly my finest work but it's temporary because we're going to replace
all the led, buzzer etc with a library called AP_Notify in the near
future.
2013-07-04 16:26:22 -10:00
Dr Gareth Owen
4c6d6ea96e
changed yaw reset to when armed to not use initial_simple_bearing
2013-06-02 11:29:30 +09:00
Randy Mackay
e3cd494709
Copter: remove debug message
2013-06-01 18:21:30 +09:00
Randy Mackay
7b50ecc73c
Copter: pre-arm check for mag field length
2013-05-31 12:23:19 +09:00
Randy Mackay
a1821c89e7
Copter: pre-arm check for board voltage < 5.8V
2013-05-31 11:31:27 +09:00
Randy Mackay
c6e383be0f
Copter: disable board voltage pre-arm check for PX4
2013-05-31 11:27:54 +09:00
Randy Mackay
c3d21a457f
Copter: add pre-arm board voltage check
...
Copter will not arm unless board voltage is over 4.5V
2013-05-28 21:50:31 +09:00
Randy Mackay
6ecd2d74a3
Copter: beep twice during arming
2013-05-27 13:55:34 +09:00
Randy Mackay
ec7ee47099
Copter: scaling stability patch
2013-05-27 11:21:31 +09:00
Randy Mackay
4fa101292a
Copter: add baro health to pre-arm checks
2013-05-25 12:24:47 +09:00
Randy Mackay
bd44c2f73d
Copter: all pre-arm checks to be disabled
...
set ARMING_CHECK parameter to zero to disable
2013-05-20 14:48:04 +09:00
Randy Mackay
43c377ca67
Copter: add compass calibration to pre-arm check
2013-05-20 14:19:47 +09:00
Randy Mackay
6efdabb104
Copter: move auto disarm into a separate function
2013-05-20 14:05:50 +09:00
Randy Mackay
1dbe98b566
Copter: display reason for pre-arm-check failures in GCS
2013-05-20 13:03:18 +09:00
Randy Mackay
f4846b417a
Copter: compiler fix for disabled logs
2013-05-19 22:55:40 +09:00
Randy Mackay
9d0f40b432
Copter: add pre_arm_rc_check
...
Motors are not be enabled unless we have passed rc checks which include
checking the radio in calibration has been performed.
2013-05-16 16:32:00 +09:00
Randy Mackay
bd6edecdec
Copter: restore logging of arm/disarm event
2013-05-13 18:07:28 +09:00
Randy Mackay
324200b52c
Copter: disable centrifugal correction when disarmed
2013-05-06 15:32:08 +09:00
Randy Mackay
372ebb602c
Copter: disable centrifugal force correction when disarmed
2013-05-05 16:55:06 +09:00
Randy Mackay
cca05ee8ae
Copter: start dataflash logging when arming
...
Stop nearly empty logs from being produced.
Removed redundant armed bit from ap state.
2013-05-03 14:49:55 +09:00
Randy Mackay
90af3262c5
Copter: pre-arm check for compass
2013-04-27 23:50:40 +09:00
Randy Mackay
58d1da2d80
Copter: integrate AC_Fence in place of limits
...
Lesser functionality than limits but saves more than 150 bytes and it
works
2013-04-27 11:14:07 +09:00
Randy Mackay
63a48f76e2
Copter: add pre-arm check of radio and accel
...
Only checks throttle channel and accelerometer scaling
2013-04-23 00:01:20 +09:00
Randy Mackay
d2bd818b2d
Copter: bug fix for auto_armed logic
...
Zero throttle when switching into an auto flight mode would cause the
motors to stop.
2013-04-17 21:28:42 +09:00
Randy Mackay
7cf2255822
Copter LEDs: replace bitRead with bitmask
...
Consolidate all checks of led_mode to leds.pde
Add #defines for bitmasks comparisons
Some formatting changes
2013-04-01 13:10:12 +09:00
Randy Mackay
38e81adae0
InertialNav: remove unnecessary "virtual" from function definitions
...
This saves about 30bytes of RAM
2013-03-19 17:51:16 +09:00
Randy Mackay
67c69a19ee
Copter: remove baro-only alt hold
...
Saves 8 bytes of memory and more importantly simplifies the alt hold
calculations
2013-02-24 14:41:29 +09:00
rmackay9
bd0e018ca0
ArduCopter: restore auto-trim method but now use AHRS.add_trim
2013-01-02 09:20:08 +11:00
rmackay9
52802cb29e
ArduCopter: limit output throttle to 800 only for TRI which does not have the new stability patch
2013-01-02 09:19:17 +11:00
rmackay9
881dae1e27
ArduCopter: remove throttle limit of 800 for quads, hexas and octacopters
...
Note: Y6 and OctaQuads still have the 800 limit because they do not have the latest stability patch
2013-01-02 09:13:42 +11:00
rmackay9
6da68c53a5
ArduCopter: bug fix so AP_Limits does not use up memory if it is disabled
2013-01-02 09:13:42 +11:00
Andrew Tridgell
9e986801c9
Copter: fixed SITL for ArduCopter
2012-12-20 14:52:34 +11:00
Pat Hickey
7af03127f6
ArduCopter: more work
2012-12-20 14:52:28 +11:00
rmackay9
072ffec493
ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position
2012-12-06 10:31:41 +09:00
Robert Lefebvre
b32d7c8b63
ACM: TradHeli
...
Prevent helis from arming while RSC control is switched on.
2012-11-26 19:03:28 -05:00
Robert Lefebvre
637c9a1a72
ACM: TradHeli
...
Removing this "throttle" output restriction for TradHelis.
2012-11-26 18:44:03 -05:00
Andrew Tridgell
bcae83c4f6
ACM: make it possible to run CLI on radio port in ArduCopter
2012-11-21 21:41:34 +11:00
rmackay9
bcb9519fd7
ArduCopter: renamed system bitmap to ap_system to resolve desktop compile issues
2012-11-11 22:42:10 +09:00
Jason Short
883bb7cfc0
ACM formatting
2012-11-09 22:15:16 -08:00
Jason Short
d2a5928c06
Ap state updates
2012-11-09 22:15:15 -08:00
rmackay9
1f801714e8
ArduCopter: incorporate new version of inertial navigation
...
Moved several navigation functions from ArduCopter.pde to navigation.pde
2012-11-07 19:21:31 +09:00
rmackay9
a1b4ec6d0e
ArduCopter: move to use new INS library instead of IMU library
2012-11-07 19:21:09 +09:00
rmackay9
c0ad98be31
ArduCopter: failsafe added to shutdown motors if mainloop fails
2012-10-09 12:30:17 +09:00
rmackay9
95763e610b
ArduCopter: allow DMP to run in parallel with DCM
...
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
2012-09-30 00:25:40 +09:00
uncrustify
7f89e6c677
uncrustify ArduCopter/motors.pde
2012-08-21 19:19:50 -07:00
Andrew Tridgell
1b0f5ac84f
ACM: use ahrs.set_fast_gains() on arm/disarm
2012-08-21 15:38:31 +10:00
Jason Short
c81064279a
ACM : removed 2-level DCM gain change - .1 will still be the default.
2012-08-18 15:43:34 -07:00
Jason Short
575a9c4fd1
ACM : Fix for reloading the user DCM gains upon arming
2012-08-18 13:17:43 -07:00
Jason Short
522fa58ea5
ACM : temp fix for throttle output limit
...
I had a bad crash when I lost authority. The logs showed the throttle pegged at 1000 which killed my control. We went round and round on this and somehow settled on no limit. That wasn't a good idea. This should really be hard coded into the Motors Library, but for now I'm just sticking it here.
2012-08-18 09:04:22 -07:00
rmackay9
07c7c3945d
ArduCopter: fixed small bug re arming_counter for TOY mode
2012-08-18 13:21:41 +09:00
rmackay9
36f947acb9
ArduCopter: changed all "int" to "int16_t" and a few "long"s to "int32_t".
...
Also moved "simple_counter" variable from global scope to the "update_simple_mode" function which is the only place that it's actually used.
2012-08-16 20:04:46 +09:00
Jason Short
b27c1ce396
ACM : Added check for second Toy mode
2012-08-11 22:37:26 -07:00
Andrew Tridgell
c2dc920d02
ACM: allow users to set the AHRS_YAW_P and AHRS_RP_P
...
the forced set left users with parameters they couldn't use
2012-08-11 08:35:10 +10:00
Jason Short
6037fabb5c
ACM Motors.pde
...
Added Toy mode options,
Added DCM kp set to .1(armed) and .8 (disarmed)
2012-08-09 16:59:44 -07:00
Jason Short
8188058404
ACM: Failsafe Fix for Mission planner initiated AUTO mode
...
Keeps the failsafe from exiting Auto mode when returning from failsafe. Added arming ability for Toy mode.
2012-07-23 19:34:25 -07:00
Jason Short
fbe898a6db
Arducopter: motors.pde formatting
2012-07-19 22:35:21 -07:00
Jason Short
98725be0ec
Arducopter: INS
...
removed calibrate accels for now
2012-07-18 22:57:10 -07:00
Andreas M. Antonopoulos
c73f7ef3ab
AP_Limits library, provides modular "limits" such as altitude and geo-fencing.
2012-07-14 19:26:17 -07:00
Jason Short
c42f9ece43
Inertial Control
...
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.
This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.
Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.
The Log should record RAW messages with special debugging values.
2012-06-13 22:34:45 -07:00
Robert Lefebvre
4e4ff84cf1
Updates to CopterLEDS
...
Creation of Nav Blink Function.
2012-05-22 09:58:37 -04:00
Robert Lefebvre
c8fb9a6635
More CopterLEDS changes.
...
Merged CopterLEDS and Piezo functions to eliminate pin conflict on APM2. Created new Parameter bit to turn piezo function on and off from MP. Moved GPS and Aux pin assignments to allow commonality between APM1 and 2. Set LED_Mode parameter default to 9 in order to make CopterLEDS completely backwards compatible with old Motor LEDS and Piezo code. Legacy users should see no difference.
2012-05-15 12:00:21 -04:00
rmackay9
905a445391
ArduCopter - motors.pde - changed references to "motor_armed" to "motors.armed()" because we've moved to using the AP_Motors class.
...
Simplified set_servos_4 function which was responsible for calling "output_motors_armed" or "output_motors_disarmed" as this determination as to whether the motors are armed or not is handled within the AP_Motors class.
2012-04-04 22:58:42 +09:00
Andrew Tridgell
7634f541b9
ACM: use set_blocking_writes(false) when we arm motors
2012-03-30 17:46:20 +11:00
Jason Short
d1fcebb5ca
Cosmetic changes
...
GPS LED lock waits for home_is_set to be true
2012-01-28 21:19:46 -08:00
Jason Short
f5fd3a0597
reset all I terms at Arming
2012-01-20 22:52:30 -08:00
Jason Short
3ebed0b278
This allows users to test the Auto_throttle hold or cruise value
2012-01-14 11:43:52 -08:00
Pat Hickey
b907c1fd5c
ArduCopter: add ch_of_mot lookup to motors.pde
2012-01-09 21:57:02 -08:00
Jason Short
e7b750074b
Added takeoff state and ground state variable
2012-01-04 09:28:36 -08:00
Andrew Tridgell
4fe527aefa
ACM: use LED_OFF/LED_ON instead of LOW/HIGH
2011-12-26 19:32:53 +11:00
Jason Short
58ad9faf6d
initing z dampener at arming
2011-12-23 14:46:08 -08:00
Andrew Tridgell
483bef35e5
IMU: update ACM and APM for flash_leds change in IMU init
2011-12-13 18:19:41 +11:00
Jason Short
307723960d
Increased slightly the Auto_trim time
2011-12-10 10:19:20 -08:00
Jason Short
b3bd4bd3c9
Cosmetic cleanup, commented functions for compiler warnings
2011-11-27 22:23:02 -08:00
Andrew Tridgell
a99bcec762
desktop: report motors armed in desktop build too
...
this helps in autotest
2011-11-25 20:00:19 -08:00
Jason Short
6bf0c32173
Removed some old debug prints from motors.pde
...
added ability to not increment I term for traversals.
2011-11-07 14:32:39 -08:00
Jason Short
c8304114a3
renamed some command variables to align with Arduplane
...
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
2011-11-04 21:41:51 -07:00
