Commit Graph

127 Commits

Author SHA1 Message Date
Randy Mackay fef7569dee Copter: added experimental LOITER_REPOSITIONING #define to config.h
APM_Config.h should be used to overriding the standard parameters but
they still require a definition in config.h or they will be undefined
when built by the mission planner.
2013-01-14 13:34:14 +09:00
Andrew Tridgell 394dccf9a8 Copter: make config defaults match 2.9 2013-01-02 15:27:42 +11:00
Robert Lefebvre 6e64b1b357 ACM: Precision Loiter RePositioning code.
Protected behind a #define
2013-01-02 09:19:39 +11:00
Pat Hickey 22ac39a4ef ArduCopter: disable and remove InertialNav defines from APM_Config
* We're not going to have the RAM available to support those in general release
2012-12-20 14:52:29 +11:00
Pat Hickey 2aa4657315 ArduCopter: changes to use CONFIG_HIL_BOARD 2012-12-20 14:52:28 +11:00
Pat Hickey 4b84e99f85 remove dumb user hooks comments 2012-12-20 14:52:28 +11:00
Robert Lefebvre 1b97a92098 ACM: Code Cleanup 2012-12-08 14:49:38 -05:00
rmackay9 85c8bdce15 ArduCopter: removed unused and out-of-date #defines from APM_Config.h 2012-12-08 13:38:39 +09:00
rmackay9 4ca27defb3 ArduCopter: update comments related to CH7 switch options 2012-12-06 17:40:36 +09:00
rmackay9 8d682b9812 ArduCopter: disable INERTIAL_NAV_XY by default 2012-12-06 10:32:02 +09:00
rmackay9 072ffec493 ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position 2012-12-06 10:31:41 +09:00
rmackay9 aa5e7e63a0 ArduCopter: switch on INS in APM_Config.h (i.e. on by default for users uploading through Arduino IDE) 2012-12-06 10:31:36 +09:00
Robert Lefebvre 3e65dd3ded ACM: TradHeli APM_Config.h changes 2012-12-04 13:32:40 -05:00
Robert Lefebvre 07d7d90882 ACM: TradHeli
Bringing in Low Pass Filter for Rate Controllers
2012-11-26 21:51:23 -05:00
Robert Lefebvre 6b8c39dd10 ACM: Creating Yaw_Look_Ahead yaw mode.
This function is not fully tested yet.
2012-11-26 21:37:13 -05:00
Robert Lefebvre 9e45e906fb ACM: TradHeli
Move some TradHeli #defines into one place in APM_Config to clean up config.h and defines.h
2012-11-26 19:09:55 -05:00
Jason Short f344eb875a ACM: Allow greater than 45° pitch and roll in Stab 2012-11-11 18:07:58 -08:00
rmackay9 cec96a76d7 ArduCopter: comment out InertialNav related Alt Hold and Loiter PID changes from APM_Config.h 2012-11-07 19:21:36 +09:00
rmackay9 fa0963d592 ArduCopter: APM_Config.h - make it ever so slightly easier to enable INERTIAL_NAV 2012-10-08 12:31:51 +09:00
rmackay9 95763e610b ArduCopter: allow DMP to run in parallel with DCM
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
2012-09-30 00:25:40 +09:00
Pat Hickey b02340fe10 APM_Config.h for ArduCopter/ArduPlane: better descr of APM2_BETA_HARDWARE 2012-09-05 15:36:57 -07:00
uncrustify 09fbe8e29a uncrustify ArduCopter/APM_Config.h 2012-08-21 19:19:50 -07:00
rmackay9 1d32e03f61 ArduCopter: added ACCEL_ALT_HOLD and INERTIAL_NAV to config.h and commented out of APM_Config.h.
Reduces possibility of difference between arduino ide compiled code and script built code (i.e. autotester, mission planner)
2012-08-19 12:31:02 +09:00
Jason Short 387a021c30 ACM : APM_Config.h : default removed for toy mixer. 2012-08-16 15:41:35 -07:00
Jason Short c305237e3a ACM : Added CH_7 Multimode 2012-08-11 22:37:26 -07:00
Jason Short 4a56e8ea2c ACM : Toy Mixer options 2012-08-09 16:59:43 -07:00
Amilcar Lucas af08b630cd Spellcheck in comments 2012-08-06 00:21:14 +02:00
rmackay9 3047084ed3 ArduCopter: added DMP_ENABLED to APM_Config.h to make it easier for people to enable it. 2012-07-28 16:31:38 +09:00
Jason Short 97845cace1 Arducopter: INS
Updated INS gains
2012-07-18 22:57:10 -07:00
Andreas M. Antonopoulos a976a59c88 AP_Limits: Configuration defaults moved to config.h. Fixed AP_LIMITS==DISABLED handling. 2012-07-16 11:46:43 -07:00
Andreas M. Antonopoulos c73f7ef3ab AP_Limits library, provides modular "limits" such as altitude and geo-fencing. 2012-07-14 19:26:17 -07:00
Andrew Tridgell 60caaa4b04 MAVLink: remove MAVLink 0.9 protocol support
this simplifies the code a lot. We're not going back to 1.0
2012-07-05 13:00:46 +10:00
Jason Short 8b212d8baa Adjustments to the Inertial_nav
lowered Rate_I and Rate_P to be less jumpy. raised throttle_p
added a clear to rate when entering loiter
moved the raw reporting
2012-06-20 08:47:47 -07:00
Jason Short e31a1d969f Inertial Nav disabled by default 2012-06-13 22:37:52 -07:00
Jason Short c42f9ece43 Inertial Control
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.

This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.

Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.

The Log should record RAW messages with special debugging values.
2012-06-13 22:34:45 -07:00
Andrew Tridgell 4fee26437b MAVLink: make ACM build with MAVLink 1.0 possible in arduino GUI 2012-04-24 22:24:58 +10:00
rmackay9 68e37774a6 ArduCopter - removed #define AUTOMATIC_DECLINATION ENABLED line to ensure users don't try and enable it because it needs a bit more work before it's ready for general use 2012-03-15 21:58:42 +09:00
Adam M Rivera 2524f9c8df AP_Declination: Added new config value to allow the user to have the declination overwritten on every 3D fix.
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
rmackay9 706bea5992 ArduCopter - added OCTA_QUAD_FRAME to comments in APM_Configh.h to help user select frame when compiling with arduino 2012-03-06 22:15:02 +09:00
Pat Hickey 6573cec611 ArduCopter APM_Config.h: add sample custom channel config
* uses new config variables introduced in 8a19543fd1e09621ba
2012-02-11 16:05:51 -08:00
Jason Short 7c25253422 Enabled auto throttle hold 2012-01-20 22:52:31 -08:00
Jason Short 2831ff9148 Off by default 2012-01-20 22:52:29 -08:00
Jason Short 3ebed0b278 This allows users to test the Auto_throttle hold or cruise value 2012-01-14 11:43:52 -08:00
analoguedevices 70b7951366 Eliminated second instance of APM2 #defines 2012-01-12 20:38:41 +00:00
analoguedevices d46f36e624 Put in commented-out APM2 #defines, to save people the trouble of having to type them in themselves 2012-01-09 01:59:55 +00:00
Jason Short dd42f06275 Cleanup 2012-01-07 22:27:26 -08:00
Jason Short 3cf77729ef Disabled stable mode wind comp by default for release 2012-01-04 09:28:38 -08:00
Andrew Tridgell 9d1c4ecfcd ACM: don't set defaults in APM_Config.h
defaults set here prevent Makefile overrides, which breaks autotest
for non-default frame types
2012-01-04 19:35:05 +11:00
Jason Short cf48091d00 removed old loiter method option 2011-12-30 23:48:04 -08:00
Randy Mackay 310f072d50 Arducopter - added "//#define APM2_BETA_HARDWARE" to AP_Config.h for developer's who received early version of the board with the old barometer 2011-12-19 22:57:00 +09:00
Jani Hirvinen 106801a59c config settings for jD motors 2011-12-19 09:29:05 +07:00
Jason Short c6657f4a93 updated Loiter control to provide an alternative to GPS rate control for users with circling issues. Works in SIM, needs flight testing 2011-12-14 22:08:41 -08:00
Andrew Tridgell 38c85c44ae ArduCopter: rename purple to APM2 2011-11-25 20:00:19 -08:00
Pat Hickey 3131ab16ef remove BROKEN_SLIDER code
use the new CLI_SLIDER_ENABLED option and the "hit ENTER 3 times"
method
2011-11-25 20:00:17 -08:00
Pat Hickey 5ee5036fa1 purple: added comment for enabling purple hardware 2011-11-25 20:00:16 -08:00
Jason Short 85a5647f5d cleanup 2011-11-21 22:11:06 -08:00
Jason Short 288db5c7c5 Better error and defaults checking 2011-11-13 22:54:18 -08:00
Jason Short c8304114a3 renamed some command variables to align with Arduplane
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
2011-11-04 21:41:51 -07:00
Jason Short 27fc6eea10 Z dampener
Integrated Aurelio R. Ramos' Z dampening code.
2011-11-01 21:18:47 -07:00
Jason Short 842311dfcd Added save WP note to APM_Config.h 2011-10-28 21:46:31 -07:00
Jason Short 27d9712e80 Merge branch 'master' of https://code.google.com/p/ardupilot-mega
Conflicts:
	libraries/APM_PI/APM_PI.cpp
2011-10-27 12:41:00 -07:00
Jason Short d089059f58 Set default gain to 20 2011-10-27 12:33:44 -07:00
Jani Hirvinen f5f3fa8fb9 Adding second default PID sets for bigger motors 2011-10-21 10:38:36 +07:00
Jason Short 4be2776b17 Added Andrew's user hooks. 2011-10-15 15:29:33 -07:00
Andrew Tridgell d89ae696ef merged the GCS updates from ArduPlane to ArduCopter
this removes all the non-MAVLink GCS options, and simplifies the HIL
and GCS code a lot. It also adds async sending of low priority GCS
text messages.
2011-10-11 20:53:43 +11:00
Jason Short b0bd9d1c44 Added second PI loop for alt hold.
Upped gains for default JDrones Frame
added gains for second PI loop for alt
removed some tests for 1280 space constraints
2011-10-02 11:36:23 -07:00
Jason Short de61e87128 Added ADC gyro Filtering for quads - this fixes a noise issue introduced into the controller
added Position mode
removed
Added back in the accelerometer experiment
Added filter_result boolean to enable filter on the fly
2011-09-29 23:27:23 -07:00
Jason Short 0ed9af1bf5 Turned off Rate_I for Arduino users. 2011-09-25 15:34:59 -07:00
Jason Short 236f665378 Added Loiter Turns - It orbits the Current location
Added WP to Loiter_time so you can spec a specific location in the planner
added new Navigation alg. Should perform better (doesn't rely on 45° flow fields like last one)
Added "Jump" counter so missions don't get overwritten in flight.
removed I term by default for Rate pitch and roll
2011-09-24 17:40:29 -07:00
Jason Short ba7abd62d8 Adjusted DCM Gains to normal levels. Added a check to stop navigating when landing and to land faster. 2011-09-23 13:52:10 -07:00
Jason Short 7177bcec77 removed old CH6 tuning defines 2011-09-22 18:51:41 -07:00
Jason Short 0fba3e6742 Added Auto_trim to CH7 option 2011-09-21 16:24:09 -07:00
Jason Short 020062498b Edited CH7 options to include Do Nothing and RTL. 2011-09-20 10:37:50 -07:00
Amilcar Lucas 227ce0a92d Merge some small misc improvements from APM_Camera branch 2011-09-17 20:25:31 +02:00
Jason Short d29cfbcee3 Integration of optical flow
bug fixes for new Simple mode
increased Baro filter by 2 fields
2011-09-15 23:33:00 -07:00
Jason Short 1ce2308d11 Removed Simple Mode
Added Simple option to mode switch positions
removed unused OptFlow code
added reset lat and lon error
removed unused init_auto
Fixed log formatting
Added simple mode bitmask
removed pitchmax
added CLI setup for enabling Simple mode to any switch position
2011-09-14 13:58:18 -07:00
Andrew Tridgell 1456a2a912 renamed top level directories
ArduCopterMega -> ArduCopter
added archives directory for old code
2011-09-09 11:27:41 +10:00