Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
24,764 Commits 71 Branches 509 Tags 780 MiB
Commit Graph

112 Commits

Author SHA1 Message Date
Randy Mackay 7e031262c3 Tools: remove duplicate from Bebop2 params file 2016-11-07 09:54:58 +09:00
Randy Mackay d9e476c96f Tools: Bebop2 param get radio failsafe 
put params in alphabetical order
 2016-11-07 09:53:37 +09:00
Randy Mackay fb47480b51 Tools: Bebop params get ground effect compensation 
Also put in alphabetical order
 2016-11-07 09:52:41 +09:00
Randy Mackay b34c14ef67 Tools: update EX700 parameter file 
swapped around lidar, TX1 and SF40c input channels
 2016-11-05 17:10:40 +09:00
Randy Mackay c19ef757ef Tools: add IRIS AC3.4 params file 2016-11-03 12:38:56 +09:00
Mathieu OTHACEHE 5e42800b5e Disco: add LED support 
Use RGBLed generic implementation to support Disco LED.
 2016-10-26 11:56:11 -03:00
Francisco Ferreira 79cb4ea595 Tools: set Disco battery capacity in frame parameters 2016-10-24 09:24:11 -03:00
Francisco Ferreira 832fec68b7 Tools: set Bebop battery capacity in frame parameters 2016-10-24 09:24:11 -03:00
Mathieu OTHACEHE 01804063f6 Disco: set SCHED_LOOP_RATE to 200 
Video stabilization on stock firmware requires main loop to run at
200Hz.
 2016-10-20 09:07:54 -03:00
Mathieu OTHACEHE 6ccbbb0074 Disco: set WP_LOITER_RAD to 30 
Use the same value for LOITER radius as in stock autopilot.
 2016-10-20 09:07:54 -03:00
Mathieu OTHACEHE 352551a239 Bebop2: Remove CR in param file. 
Remove CR in Parrot_Bebop2.param line endings.
 2016-10-20 09:07:07 -03:00
Andrew Tridgell 227bd3d13c Frame_params: enabled FS_THR_ENABLE on Bebop and Bebop2 2016-10-18 21:00:13 +11:00
Andrew Tridgell fe3d57b19c Frame_params: fixed scaling errors in Bebop parameters 2016-10-18 08:28:58 +11:00
Andrew Tridgell 16bd04ba7e Tools: update frame parameters for Disco 
use new SERVO_RNG_ENABLE option. This makes tuning independent of the
users R/C settings
 2016-10-15 16:59:37 +11:00
Andrew Tridgell 19d580d60f Disco: adjust default Disco parameters 2016-09-16 19:31:28 +10:00
Andrew Tridgell dd3d5152f6 Frame_params: added more Disco info 2016-09-15 18:17:09 +10:00
Andrew Tridgell 94460949e1 Frames: added Parrot Disco parameters 2016-09-15 18:09:35 +10:00
Randy Mackay e4efa4c07c Tools: EnRoute EX700 param file gets flow orientation 2016-08-31 10:34:26 +09:00
Randy Mackay 4fbc686e68 Tools: EnRoute EX700 params get SF10b 2016-08-29 21:06:50 +09:00
Randy Mackay 28715106d6 Tools: update Bebop2 parameter gains 2016-08-26 09:12:48 +09:00
Randy Mackay 29e18dba5b Tools: add battery failsafe to EnRoute EX700 param file 2016-08-25 13:07:56 +09:00
Randy Mackay 65ee71075c Tools: set GND_EFFECT_COMP for Bebop2 params 2016-08-09 16:19:53 +09:00
Randy Mackay 650d6756bf Tools: update EnRoute EX700 parameter defaults 2016-08-05 16:26:36 +09:00
Randy Mackay 3b86ef71ca Tools: update EnRoute EX700 parameters 2016-08-04 16:56:46 +09:00
Randy Mackay de24d2ca3b Tools: add EnRoute EX700 frame parameters 2016-08-04 14:37:14 +09:00
Julien Beraud fdb43fdc6a Frame_Params: fix param name for bebop 
Change-Id: Id1c16e11e68f0004019afc885acf0e0f119b78b7
 2016-07-15 12:25:17 -03:00
Julien Beraud 3897e03d39 Frame_params: fix Bebop param names 
Broken by AP_Motors refactoring
 2016-05-04 10:09:31 +09:00
Randy Mackay e78595bf48 Frame_Params: remove defaults from Bebop2 params 
Removed parameter values that should already be these values by default on a fresh install
 2016-01-23 11:42:13 +09:00
Julien BERAUD 90d266698d Frame_Params: Bebop 2 tuning by Leonard 2016-01-22 13:58:46 -02:00
Julien BERAUD b8aef20ee8 Frame_Params: Fix bebop compass orient 
Without COMPASS_EXTERNAL set to 1, COMPASS_ORIENT wasn't taken
into account, leading to bad data
 2016-01-13 19:17:27 -02:00
Julien BERAUD e22fe34259 Params: add arming check for bebop 
Taken from bebop 2
 2015-12-22 16:50:27 -02:00
Randy Mackay 4f612f5d69 Frame_params: Bebop2 parameters 
Rate PIDs are taken from original bebop which are slightly too high
 2015-12-14 11:51:34 +09:00
Randy Mackay 8be0f9371f Frame_params: update recommended Bebop parameters 2015-12-14 11:49:00 +09:00
orlando3d 6d266d2063 Update 3DR_X8-M_RTF.param 2015-10-18 09:27:54 +09:00
orlando3d 7c0239e59c Update 3DR_X8+_RTF.param 2015-10-18 09:27:51 +09:00
orlando3d 11ae5a64d0 Update 3DR_Iris+.param 2015-10-18 09:27:49 +09:00
Leonard Hall 041dd3c855 Frame: new Bebop default parameters 2015-10-08 12:21:14 +09:00
Leonard Hall 1f287da70b Tools: first draft Parrot Bebop parameters 2015-09-12 12:53:43 +09:00
Randy Mackay 08466d34e8 Frame: add SToRM32 gimbal parameters 
These parameters can be used to configure ardupilot to control a SToRM32
3-axis gimbal attached to Pixhawk Telem2 port using the MAVLink
protocol.  Gimbal Tilt is controlled using the RC6 input
 2015-06-02 14:49:40 +09:00
Randy Mackay cebd578403 Frame Params: remove unused Advanced, Beginner 2015-04-21 10:44:26 +09:00
Randy Mackay f225558dbd IRIS params: update RATE_PIT_IMAX to 1000 2015-02-02 17:59:52 +09:00
Craig Elder 324473a15b Frame_params: Updating 3DR_X8_RTF.param for Copter 3.2 2014-11-14 18:03:29 -08:00
Craig Elder 5ea947de2f Frame_params: Updating 3DR_X8-M_RTF for Copter 3.2 2014-11-14 17:56:56 -08:00
Craig Elder e3d6b25301 Frame_params: Updated 3DR_X8+_RTF 2014-11-14 13:52:38 -08:00
Craig Elder 5df3d24c77 Frame_params: 3DR_X8+_RTF.param 
Adding param file for 3DR X8+
 2014-10-28 19:33:44 -07:00
Craig Elder df16dd67d2 Frame_params: 3DR_Iris+.param 
Add GPS_HDOP_GOOD
 2014-10-23 17:05:08 -07:00
Craig Elder adf741b959 Frame_params: Updated 3DR_X8-M_RTF.param 2014-10-07 15:00:57 -07:00
Craig Elder 5b23f81e2b Frame_params: Updating 3DR_X8-M_RTF.param 2014-10-06 16:07:49 -07:00
Craig Elder 5d7ec98d7a Frame_params: Adding 3DR_X8-M_RTF.param 2014-10-06 15:44:35 -07:00
Craig Elder 41ce8c2abd Frame_params: 3DR_Iris+ 
Decreased ATC_RATE_RP_MAX to 18000
 2014-10-06 12:17:52 -07:00