Gone4Dirt
e02a9890b3
Plane: force mission resume on RTL when DO_LAND_START in mission
2020-02-25 10:05:12 +11:00
Peter Barker
74dbcac40e
ArduPlane: log disarm method
2020-02-22 12:16:29 +11:00
Andy Piper
04792b23a9
ArduPlane: add gyro fft logging
2020-02-22 11:15:37 +11:00
Peter Barker
58d45ef04a
Plane: let AP_Vehicle handle loop()
2020-02-06 14:41:06 +11:00
Peter Barker
a45abc7762
Plane: move setup method up to AP_Vehicle base class
2020-01-28 11:34:51 +11:00
Peter Barker
de423a945f
Plane: move rssi initialisation into init_ardupilot
...
This makes it the same as Rover and Copter.
2020-01-28 11:34:51 +11:00
Peter Barker
33a0e55b32
Plane: correct duplicate button instance
2019-12-10 09:29:52 +09:00
Peter Barker
a567e8bc94
Copter: use https:// scheme for ardupilot URLs
2019-12-10 07:53:46 +11:00
Andrew Tridgell
d872ca27ce
Plane: added dynamic harmonic notch support
2019-11-19 07:08:01 +08:00
Andrew Tridgell
2b27cd2ce9
Plane: Add EFI Support
2019-11-17 20:10:54 +11:00
Michael du Breuil
ee96ec7f0d
Plane: Support new AP_Vehicle::set_mode
2019-10-25 08:48:22 +08:00
Andrew Tridgell
ff400243e0
Plane: added a new TAKEOFF flight mode
...
takeoff then circle in direction of takeoff
2019-10-17 12:19:43 +11:00
Peter Barker
b12f620233
Plane: fix format string warnings
2019-09-02 21:00:59 +10:00
Peter Barker
2768d229ed
Plane: stop updating sensor status flags
...
These are updated as required in the gcs library itself.
2019-08-17 17:45:03 +10:00
Peter Barker
20626a1fe1
Plane: move automatic declination setting into AP_Compass itself
2019-08-13 10:02:13 +10:00
Michael du Breuil
22598b1a4b
Plane: Reduce inerital nav dependence
2019-07-16 12:11:42 +09:00
Peter Barker
fb2422e496
Plane: stop setting eas2tas in AirSpeed - it can work it out itself
2019-06-06 12:44:36 +10:00
Peter Barker
13f7022cec
Plane: move Arming functions into AP_Arming file
2019-05-30 16:02:10 +09:00
Peter Barker
400aa53654
Plane: move arming-related functionality into parent classes
...
Logging moves up
arming via mavlink moves up
arming via switch moves up
2019-05-30 07:37:30 +09:00
Tom Pittenger
08d5e7d4ae
Plane: move heartbeat sending to gcs instead of by vehicles
2019-05-14 10:54:45 -06:00
Vinicius Knabben
99ad94ec49
Plane: Added parachute release on critcal sink rate and battery failsafe actions
...
Signed-off-by: Vinicius Knabben <viniciusknabben@hotmail.com>
2019-04-30 10:04:58 +10:00
Peter Barker
14a8bf3aec
Plane: move responsibility for logging into library
2019-04-23 10:06:17 +10:00
Peter Barker
ad16f31e11
Plane: call compass cal routine directly from sched table
2019-04-23 10:06:17 +10:00
Pierre Kancir
65b4ba0539
ArduPlane: use past_interval_finish_line and line_path_proportion from Location
2019-04-23 09:20:43 +10:00
Peter Barker
3a4cbdd41f
Plane: remove pointless update_notify shim
2019-04-11 05:31:43 -07:00
Michael du Breuil
35bd143532
Plane: Update GPS before updating current_loc
...
Fixes 20ms of extra induced lag on the DCM position estimate
2019-04-05 23:08:24 -07:00
Tom Pittenger
ade6281923
Plane: use #if ADVANCED_FAILSAFE == ENABLED just like Rover and Copter
2019-04-03 17:46:50 -07:00
Tom Pittenger
0270c57530
Plane: massive refactor and creation of Mode class
2019-04-02 16:28:52 +11:00
Peter Barker
73707077b5
Plane: move enabled parameter into compass library
2019-04-02 10:24:49 +11:00
Peter Barker
f004765494
Plane: fix incorrect misleading comment
2019-03-31 18:35:53 -07:00
Peter Barker
ca7566fff9
Plane: use enum class for ArmingMethod and ArmingRequired
2019-03-12 19:48:14 +11:00
Peter Barker
bd444d97dc
Plane: move sending of airspeed_autocal into AP_AirSpeed
2019-03-06 11:32:52 +11:00
Mark Whitehorn
487ad7a90f
Plane: add QACRO mode for quadplanes
...
use acro_r/p/y_rate params in qacro
port ACRO throttle handling from copter
handle non-tailsitter controls
2019-03-05 10:13:20 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
f430fd14f6
Plane: replace location_offset() and get_distance() function calls with Location object member function calls
...
This allows removing duplicated code
2019-02-28 11:44:09 +11:00
Peter Barker
dea75a87fd
Plane: AHRS set_orientation renamed to update_orientation
2019-02-26 10:28:09 +11:00
Peter Barker
34853fb1bf
Plane: move update_sensor_status_flags into GCS subclasses
2019-02-19 14:09:59 +11:00
Mark Whitehorn
95b3a5bacd
ArduPlane: implement hover throttle learning for quadplanes
...
disable by default
check quadplane.enable in update_hover_learn
2019-02-16 19:04:13 -08:00
Peter Barker
b6bf8d8368
Plane: make setting of home boolean in preparation for sanity checks
2019-02-15 08:28:45 +11:00
Michael du Breuil
df1632054e
Plane: Update throttle mix
2019-02-05 11:05:54 +11:00
Peter Barker
40856fef56
Plane: remove vestiges of old PX4_MIXER code
2019-01-19 19:31:03 +11:00
Peter Barker
6fc76a32af
GLOBAL: use AP::logger() and strip redundant Log_ from methods
2019-01-18 18:08:20 +11:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Peter Barker
76b31f315a
Plane: log_terrain_data no longer takes a DataFlash argument
2019-01-18 11:17:40 +11:00
Michael du Breuil
843c92ced5
Plane: Remove some redundant code/state resets
2019-01-15 10:45:50 +11:00
Andrew Tridgell
f35cebcca4
Plane: fixed EKF yaw reset
...
we need to do the yaw reset before updating the rest of quadplane, or
it is not effective
thanks to Leonard for noticing the bug!
2019-01-14 08:32:17 +11:00
Nikhil Upadhye
d1e93bae83
Plane: adding new mode QAUTOTUNE
...
copter like autotune support for quadplanes and tailsitter in VTOL mode.
cleanup
2018-12-14 16:33:11 +11:00
Peter Barker
153228bef5
Plane: call GCS update functions at quadcopter main loop rate
2018-12-10 12:52:41 +09:00
Peter Barker
7f5c0db949
Plane: adjust for new update entry points into GCS
2018-12-10 12:52:41 +09:00
IamPete1
c6e70c0454
Plane: add roll limit for tailsitters
...
Quadplane: add tailsitter pitch params
2018-12-01 09:40:07 +11:00
Peter Barker
ba3a369651
Plane: remove update_events scheduler shim
2018-11-27 10:07:13 +11:00
Michael du Breuil
1e220d3d37
Plane: Add support for mode change to QLand as a failsafe
2018-11-24 14:37:04 -08:00
Peter Barker
d4e88bc6ba
Plane: remove pointless wrappers around RC_Channels functions
2018-11-23 10:56:17 +11:00
Peter Barker
03b71e1123
Plane: remove pointless wrappers around gcs functions
2018-11-23 10:56:17 +11:00
Andrew Tridgell
da69bf3391
Plane: added an abstraction for reverse thrust
...
use have_reverse_thrust() and get_throttle_input()
2018-11-16 08:33:35 +11:00
Peter Barker
a5c34f6172
Plane: OpticalFlow takes care of its own logging
2018-11-13 10:40:23 +11:00
Andrew Tridgell
432d786f82
Plane: pass height to landing gear update
2018-11-10 21:24:19 +11:00
Eugene Shamaev
01178a75e9
Plane: added landing gear support
2018-11-09 14:35:14 +11:00
Andrew Tridgell
f2b8067023
Plane: pass manual_rc_mask to iocmu mixer
2018-11-07 07:35:45 +11:00
Andrew Tridgell
c3d434bc35
Plane: pass mixing gain to iomcu
2018-11-07 07:35:45 +11:00
Andrew Tridgell
d5c29fc57e
Plane: use IOMCU mixing if available
2018-11-07 07:35:45 +11:00
Peter Barker
901664ce09
Plane: add support for RCn_OPTION (servorelay,camera)
...
Closes #7071
Closes #7666
2018-09-05 13:44:07 +10:00
Michael du Breuil
e4bbcd5ee3
Plane: Don't initilize motors with a trim value
2018-08-23 13:19:08 +10:00
Alexander Malishev
001948d40c
Plane: publish navigation info to OSD
2018-08-16 10:26:34 +10:00
Randy Mackay
903d00c4b2
Plane: remove compass accumulate
2018-08-06 11:05:34 +10:00
Andrew Tridgell
1d675390ab
Plane: make soaring an optional build feature
...
this disables soaring on px4-v2, saving 5k of flash
This is needed to consider pr #9042 , which takes a lot of flash space
2018-07-30 13:09:15 +10:00
Peter Barker
85f339caae
Plane: remove annoying ice_update shim
2018-07-04 21:08:47 +01:00
Peter Barker
e404562544
Plane: remove vexing button_update shim
2018-07-04 21:08:47 +01:00
Peter Barker
4502fd21c3
Plane: use compass singleton for logging
2018-07-04 20:11:27 +01:00
Michael du Breuil
1c276e6af7
Plane: Remove unneeded wrapper functions
...
Also removes unneeded battery failsafe flag clearing
2018-06-27 11:39:35 +10:00
Peter Barker
9824832523
Plane: use AP_RTC
...
Plane: AP_GPS now sets the system time directly
2018-06-15 08:01:22 +10:00
Peter Barker
bc9df01d21
Plane: remove sending of statustext for home location
2018-05-29 14:38:45 +10:00
Peter Barker
22306c370b
Plane: factor out a Plane::set_home
2018-05-29 14:38:45 +10:00
Tom Pittenger
4dca1c48f2
Plane: update vehicle max_speed to ADSB library
2018-05-23 14:02:45 -07:00
Michael du Breuil
b479f3760a
Plane: Remove some unneeded logging indirection
...
Saves 32 bytes on make px4-v2
2018-05-16 20:34:00 +10:00
Peter Barker
eb026e0a5f
Plane: correct compilation when logging is disabled
2018-05-10 17:55:13 +09:00
Peter Barker
68497f27fa
Plane: move try_send_message handling of RC_CHANNELS up
2018-05-08 12:33:32 +01:00
Peter Barker
5ef417a669
Plane: GPS now logs its own data
2018-04-18 13:50:55 +09:00
Peter Barker
2b54113334
Plane: Baro does its own dataflash logging
2018-04-12 19:12:12 +01:00
Michael du Breuil
3e4288d604
Plane: Use RC_Channels instead of hal.rcin
2018-04-11 21:47:07 +01:00
Michael du Breuil
7405bb7b85
Plane: Support new battery failsafes
2018-03-27 22:12:21 +01:00
Peter Barker
7fd859da65
Plane: move home state into AP_AHRS
2018-03-19 10:32:37 +09:00
Peter Barker
7c86c4fe61
Plane: use ins singleton
2018-03-16 00:37:35 -07:00
night-ghost
98b8a61ca8
Plane: allow AP_Stats to be optional
2018-03-02 07:23:35 +11:00
David Ingraham
a6aeebad4b
Plane: Add support for AP_Gripper
2018-03-01 14:14:43 +11:00
Andrew Tridgell
e6cebdecd1
Plane: use scheduler.get_last_loop_time_s()
2018-02-13 17:15:05 +11:00
Peter Barker
3859e5dfb1
Plane: eliminate update_perf_logging scheduler table shim
2018-02-13 17:15:05 +11:00
Andrew Tridgell
36660b2124
Plane: use filtered loop time
2018-02-13 17:15:05 +11:00
Peter Barker
4586b892f2
Plane: pass log-performance-bit at init time rather than update time
2018-02-13 17:15:05 +11:00
Peter Barker
8cae776448
Plane: move logging of PM and PERF messages to AP_Scheduler
2018-02-13 17:15:05 +11:00
Peter Barker
02540fdbf9
Plane: use AP_Scheduler's loop() function
2018-02-13 17:15:05 +11:00
Peter Barker
73092c3c30
Plane: use scheduler ticks in place of mainloop_count
2018-02-13 17:15:05 +11:00
Peter Barker
519e6c31d2
Plane: use AP::PerfInfo library
2018-02-13 17:15:05 +11:00
Andrew Tridgell
2fb6113098
Plane: use AP:PerfInfo class
2018-02-10 10:50:22 +11:00
Andrew Tridgell
d1e11a5bde
Plane: fixed build (remove learn_offsets call)
2018-02-08 17:36:33 +11:00
Tom Pittenger
512b327cd4
Plane: failsafe events to use enums instead of magical numbers : Non-functional change
2017-12-07 00:19:32 -08:00
Andrew Tridgell
2a81792b41
Plane: don't disable compass on one bad reading
...
the compass can go back for a short time and recover
found by Michael
2017-11-28 09:02:24 +11:00
Michael du Breuil
9720fcb8cc
Plane: Only update home when not armed, rather then not soft armed
...
Plane supports being armed, in takeoff logic and not spinning the motor
until the moment the safety button has been pressed. Unfortunately
because the safety button is required to be pressed for soft arming this
results in the plane updating home position while the user moves the
vehicle or is holding it to throw the vehicle which will can result in
several meters of altitude error from where the user expected home to
be.
Because the normal approach to plane is to have activated the safety
button before arming the aircraft this is not expected to be a behaviour
change for most users, but an improvement for people who use the button
to initiate a takeoff.
2017-11-21 11:45:15 +11:00
Michael du Breuil
767018b1d4
Plane: Support unlocking cruise heading with rudder
2017-11-09 09:39:44 +11:00
Tom Pittenger
8029a7f10e
Plane: add Tom Pittenger to developers list
...
Plane: add Tom Pittenger to developers list. He was added to main Plane.h as "Lead Developer" here *https://github.com/ArduPilot/ardupilot/blob/master/ArduPlane/Plane.h#L2 ) but never to the main ArduPilot.c file.
2017-11-06 13:46:32 +01:00
Andrew Tridgell
9c8cd6c1cc
Plane: added Q_TRANS_DECEL
...
this gives a deceleration rate for QRTL transition from RTL, and also
for transitions to QLOITER
2017-11-05 20:44:42 +11:00
Michael du Breuil
d52f5155f0
Plane: Rename rc failsafe state members
2017-11-02 16:46:08 -07:00
Andrew Tridgell
1085069851
Plane: use WP_LOITER_RAD if RTL_RADIUS is 0 for QRTL
2017-10-30 16:52:19 +11:00
Andrew Tridgell
aa430a6e2c
Plane: use RTL_RADIUS for QRTL threshold
...
when Q_RTL_MODE=1 in a quadplane use RTL_RADIUS as the distance to
switch to QRTL mode. We navigate to the destination using direct
waypoint navigation instead of using a loiter circle.
2017-10-30 16:30:38 +11:00
Peter Barker
d49be616da
Plane: call ins's periodic function
2017-10-27 16:33:45 +11:00
Tom Pittenger
8adacfeea3
Plane: always log MODE and include reason when logging is enabled
2017-10-25 21:18:29 +11:00
Lucas De Marchi
44ffb67837
ArduPlane: use FALLTHROUGH define
...
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Peter Barker
1a665280e9
Plane: remove CLI
2017-08-14 10:23:50 +09:00
Peter Barker
2fb46a67dd
Plane: camera is responsible for taking distance-based-images and logging
2017-07-28 14:27:53 +01:00
Michael du Breuil
f87a69dcf2
Plane: Throttle based landing aborts should ask the landing library
...
Throttle based aborts should be requesting a go around from AP_Landing.
This was missed in the initial port.
2017-07-17 08:43:50 -07:00
Peter Barker
c058fba5ac
Plane: eliminate GCS_MAVLINK::send_statustext_all
2017-07-11 23:53:53 +01:00
Peter Barker
3b0a7703c4
Plane: eliminate gcs_send_message wrapper
2017-07-11 23:45:16 +01:00
Peter Barker
5a8f01c19c
Plane: use send_text method on the GCS singleton
2017-07-09 17:17:29 -04:00
Peter Barker
949e07c7e3
Plane: use DataFlash should_log to determine raw IMU logging
2017-06-29 15:26:27 +01:00
Mark Whitehorn
6607dafc66
ArduPlane: change is_tailsitter() to tailsitter_active()
2017-06-07 20:21:49 +10:00
Mark Whitehorn
53b82d1d4d
ArduPlane: add comments on tailsitter pitch limits
2017-06-07 20:21:49 +10:00
Mark Whitehorn
65755454e0
ArduPlane: set tailsitter VTOL pitch limits using only Q_ANGLE_MAX
2017-06-07 20:21:49 +10:00
Michael du Breuil
92d505598b
ArduPlane: Poll AP_Landing for fly forward information
2017-05-15 14:50:29 -07:00
Peter Barker
378015691b
Plane: stop appending lf to PERF message
2017-05-01 16:21:55 +01:00
Andrew Tridgell
351304ebcb
Plane: don't set fly-forward when transitioning
...
when quad motors are providing assistance don't see the fly-forward
flag in the AHRS. This will lower the chance of EKF yaw confusion
2017-05-01 14:27:45 +10:00
Andrew Tridgell
954905e0eb
Plane: allow battery failsafe with usb connected
...
some people connect USB to allow connections from a companion
computer. The arming check is sufficient to prevent unwanted battery
failsafes when bench testing
2017-04-28 16:33:49 +10:00
Andrew Tridgell
516bf26719
Plane: fixed QRTL change when coming from loiter
...
the nav controller can think we have already reached the loiter target
if we were last in a LOITER when we switch to RTL. In that case it
would switch to QRTL immediately
found by Leonard (thanks!)
2017-04-24 16:28:59 +10:00
Eugene Shamaev
ca84ab36be
Plane: AOA and SSA estimations are added to parameters and data logs
2017-04-19 20:48:42 +10:00
Andrew Tridgell
17ba8b3304
Plane: raise logging rate for PID and servos
2017-04-09 16:45:19 +10:00
Andrey Kolobov
35d406aeab
Plane: added a soaring controller to Arduplane
2017-03-14 08:53:10 +11:00
Michael du Breuil
1bb806edb2
Plane: Use new landing interfaces
2017-03-02 12:38:59 +11:00
Andrew Tridgell
3bb25eb194
Plane: added Q_TAILSIT_INPUT
...
this allows the user to control tailsitters either in body frame (like
a plane) or in earth frame (like a multicopter). This is useful for
people wanting to learn to fly prop-hang on 3D planes
2017-02-26 09:20:13 +11:00
Andrew Tridgell
c787f4c56f
Plane: initial support for tailsitter transitions
2017-02-18 17:26:43 +11:00
Michael du Breuil
29b16dbafd
Plane: Refactor to request relative altitudes from AHRS
...
Removes the need for plane to do the math for finding the relative height.
Also caches the value at the same time we update current_loc, which is a
non behaviour change as that was the only time you could see a change in
the relative height propegate through the system anyways
2017-02-13 09:23:14 +11:00
Tom Pittenger
1a34221db9
Plane: remove old commented code
...
- leftover from the AP_Landing stage refactor
2017-01-26 13:45:28 -08:00
Michael du Breuil
4cf1c74c62
AP_Landing + Plane: Check for land complete before requesting disarm
2017-01-26 13:11:44 -08:00
Tom Pittenger
2ccd91d88f
AP_Landing: rename stage enum
2017-01-26 13:11:44 -08:00
Tom Pittenger
650e694eb1
Plane: move landing.reset to landing.do_land()
2017-01-26 13:11:44 -08:00
Tom Pittenger
61bc0a6206
Plane: check stage==LAND instead of landing.in_progress
2017-01-26 13:11:44 -08:00
Michael du Breuil
3e66dd10d7
Plane: Move landing stages inside AP_Landing and refactor
2017-01-26 13:11:44 -08:00
Tom Pittenger
6c0296ba13
AP_Landing: shadow copy of plane flight_stage into landing
...
.. and describe stages without using specific stage name
2017-01-26 13:11:43 -08:00
Randy Mackay
fc4741395d
Plane: notify initialised after parameters loaded
2017-01-23 15:07:21 -08:00
Andrew Tridgell
081909bf6a
Plane: removed use of pwm_to_angle()
2017-01-12 17:39:37 +11:00
Andrew Tridgell
b83f50be0f
Plane: use new SRV_Channels API
2017-01-12 17:39:37 +11:00
Tom Pittenger
063f517424
Plane, TECS, AP_Landing: rename stage LAND_ABORT to ABORT_LAND
...
this will reduce confusion when searching for FLIGHT_LAND_* and you get a bunch of takeoff related hits. It will also make more sense when the landing library fully manages the FLIGHT_LAND stage entirely because it will not mange FLIGHT_LAND_ABORT
2016-12-30 23:50:03 -08:00
Tom Pittenger
04f32b6ec6
Plane: simplify flight stage landing check to use landing.in_progress
2016-12-30 23:50:03 -08:00
Tom Pittenger
84e11fd899
Plane, AP_TECS: do not pass auto_land flag to TECS, it already knows it
2016-12-30 23:50:03 -08:00
Tom Pittenger
c286ceba43
Plane: move enum FlightStages to AP_Vehicle::FixedWing
2016-12-30 23:50:03 -08:00
Tom Pittenger
b7b56b94a3
Plane: convert landing.complete to landing.is_complete()
2016-12-14 04:32:30 -08:00
Tom Pittenger
4b683edac9
Plane: simplified logic where landing complete overrides the calc value
2016-12-14 04:32:30 -08:00
Tom Pittenger
83f0a8114b
Plane: use a common reset for uniform landing wipe
2016-12-14 04:32:30 -08:00
Tom Pittenger
8c1509ad47
Plane: abstract land abort request method
2016-12-14 04:32:30 -08:00
Randy Mackay
c3b6fd4315
Plane: fix suppressing comment for case fall through
...
No functional change
eclipse stops complaining if no-break is used in place of fall-through
2016-12-14 13:22:15 +09:00
Tom Pittenger
a3ccca17ff
Plane: use fabsf instead of fabs
2016-12-06 17:38:47 -08:00
Peter Barker
669dc01b67
Plane: correct on_flight_line landing stage check
2016-12-06 03:24:41 -08:00
Tom Pittenger
9dd46aa03a
Plane: post msg if aborting via throttle
...
fixes https://github.com/ArduPilot/ardupilot/issues/4906
2016-12-02 17:40:01 -08:00