dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
26,193 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

1628 Commits

Author SHA1 Message Date
Mateusz Sadowski ee72931190 drivers: add support for TeraRanger Evo 
This commit adds i2c support for TeraRanger Evo sensor
by Terabee

Signed-off-by: Mateusz Sadowski <msadowski90@gmail.com>
 2017-09-15 12:07:16 +01:00
David Sidrane 694de32740 ROMFS::Removed ardrone_interface from PX4 only used PX4v1 
Removed that driver was only referenced from the now depricated
      px4fmuv-1
 2017-09-10 13:37:23 -04:00
David Sidrane f6a0765d3c ROMFS:px4io-v1:Removed px4io-v1 board from PX4 
Only support px4io-v2 px4io
 2017-09-10 13:37:23 -04:00
David Sidrane 62a2351a72 ROMFS:Removed FMUv1 from rcS etal 2017-09-10 13:37:23 -04:00
David Sidrane c0bff500fe ROMFS:Removed fmuv1 exclude from mixers 2017-09-10 13:37:23 -04:00
David Sidrane c01889ea4f ROMFS:Removed fmuv1 exclude from Air Frames 2017-09-10 13:37:23 -04:00
Lucas De Marchi 9d6aee82dd aerofc: switch companion baud to 921600 2017-09-05 20:28:15 +01:00
Daniel Agar 2fc29cf68f rc.fw_defaults FW position failsafe defaults 2017-09-05 12:57:25 -04:00
acfloria e5924f8172 ROMFS: Remove flaperons from AAERTWF mixer. 2017-08-26 22:37:51 +02:00
David Sidrane dd00858ca7 px4fmu_common:FMUv5 start ist8310 on I2C1, I2C2 & I2C3 2017-08-26 03:44:59 -10:00
David Sidrane a14d256a2f tap_common:Add passivly starting the PWM rgbled driver 
Board builds may now inclulde both the PWM and I2C RGB LED
    To add the PWM RGB LED driver:The board must define
    BOARD_HAS_LED_PWM and include rgbled_pwm the moulde list.

    This change attempts to start the either rgbled driver, that
    may or may not be present. If it is not present the +e
    setting allows the start up to continue.
 2017-08-26 03:44:59 -10:00
David Sidrane 5c3f2b783f px4fmu_common:Add passivly starting the PWM rgbled driver 
Board builds may now inclulde both the PWM and I2C RGB LED
   To add the PWM RGB LED driver:The board must define
   BOARD_HAS_LED_PWM and include rgbled_pwm the moulde list.

   This change attempts to start the PWM rgbled driver, that
   may or may not be present. If it is not present the +e
   setting allows the start up to continue.
 2017-08-26 03:44:59 -10:00
ChristophTobler a2cf87b3ab run px4flow for v4 pro 2017-08-21 16:47:59 +02:00
NRottmann 0f8f5d29be Enable Simulation of the Hippocampus (AUV from TUHH) 
Adding files which enable a simulation with the autonomous underwater
vehicle (AUV) from the Technical University Hamburg-Harburg
 2017-08-20 20:59:15 +02:00
sanderux 1a0c23d8b3 Support thrust reversal for vtol back transition 2017-08-16 03:06:13 +02:00
Lorenz Meier fa482b4ebd Racing boards: Default FMU to task as there is plenty of RAM to do this. 2017-08-13 11:39:44 +02:00
sanderux 2f1327540a DeltaQuad mixer upgrade 2017-08-09 22:28:05 +02:00
sanderux 220bd82b93 Per channel PWM disarmed values 2017-08-09 22:28:05 +02:00
Lorenz Meier 45f2a52a7d Sensor startup: Simplify and fix Pixhawk 2.1 
This change simplifies the sensor startup and fixes the detection of airspeed sensors on Pixhawk 2.1
 2017-08-06 20:52:23 +02:00
David Sidrane 102003c664 rc.sensors:Use HW type to refine startup / deprecate mpu9250 on PixhawkMini 
Using the hwvercmp on FMUv2 HW derivatives built with px4fmu_v3_default
   to ues a more targeted startup approach:

  1) Detect V3 and V2M

  2) On V3 use the external mpu9250 to further discriminate between 2.0
     and 2.1. Then only start the devices that are on that version of
     the board.

 3) Due to HW errata on PixhawkMini deprecate mpu9250.
     The mpu9250 will not start reliably on the PixhawkMini
     Since we have an ICM20608 and an External Mag the
     mpu9250 is not to be used.
 2017-08-05 19:26:20 +02:00
José Roberto de Souza ce180af4ca aerofc: Move GPS to UART7 
The UART3 also have the I2C bus 2 functions so moving GPS to UART7 to
have one additional I2C.
To keep GPS working is also necessary update the FPGA RTL to version
0xC1 or higher.
 2017-08-02 11:49:10 +02:00
Daniel Agar fa18c3d6e6 delete vtol_quad_x (replaced with quad_x) 2017-08-01 09:59:26 +02:00
Jan Liphardt 11508e080a Create 3037_parrot_disco_mod (#7621) 
* Create 3037_parrot_disco_mod

Add support for the Parrot Disco airframe. Tested with both Pixhawk Mini and Pixracer, using a generic 30A ESC and a Cobra 2221/16 motor.

* Update 3037_parrot_disco_mod

fixed indentation per @Dagar

* Use new generic FW wing mixer (fw_generic_wing.main.mix)
 2017-07-29 23:12:14 +02:00
Lorenz Meier 61b0a81bf9 HITL startup: Further simplification of boot logic in commander 2017-07-29 23:06:50 +02:00
Lorenz Meier 03324e0fb1 ROMFS: Remove stale HITL config 2017-07-29 23:06:50 +02:00
Lorenz Meier 8aa1382e08 ROMFS: Switch HIL to a setting orthogonal to airframes 
This makes it easy to flip any airframe config over to HIL.
 2017-07-29 23:06:50 +02:00
Lorenz Meier 9124617315 MAVLink: Always enable forwarding for companion link 2017-07-27 10:15:53 +02:00
Lorenz Meier f746f9a9b3 UAVCAN: Reduce memory footprint 2017-07-26 07:55:31 +02:00
Beat Küng 0668d61665 SYS_FMU_TASK: add param to start fmu as task (default=work queue) 2017-07-18 20:06:10 +02:00
Beat Küng 5aa8b455c2 crazyflie airframe: add maintainer 2017-07-14 11:57:11 +02:00
Beat Küng 69f0288649 aerofc airframe: RTF -> Ready to Fly Drone & add maintainer 2017-07-14 11:57:11 +02:00
Beat Küng 6463bd4f6f sensors: use ModuleBase & add documentation 2017-07-14 11:57:11 +02:00
Beat Küng 9e4d1235ac pwm command: fix -e param (it was just ignored) 
to keep the behavior the same, remove the -e flags from all pwm commands
that use it in the scripts.
 2017-07-14 11:57:11 +02:00
Beat Küng 5bdbfa9b5c send_event: convert to use ModuleBase 2017-07-14 11:57:11 +02:00
Henry Zhang 145c05acc7 Add support for the mpu6k to the MindPXv2 2017-07-11 09:52:51 +02:00
Daniel Agar 164010ea4c
standard plane consistent metadata 2017-07-09 16:36:44 -04:00
Daniel Agar 8ff40d8048 consolidate standard plane configurations 2017-07-09 21:05:03 +02:00
Daniel Agar 7a9e31f440 delete unused MPC_XY_FF and MPC_Z_FF (#7563) 2017-07-08 20:57:10 -04:00
Daniel Agar 75a528e061 FW EKF2 and ublox defaults 
- closes #7550
 2017-07-09 00:24:00 +02:00
Lorenz Meier b42c1123a2 ROMFS: Add flaps and gear mixers to all standard planes 
It makes sense to have this for all standard planes and our default PWM outputs for MAIN are always 6 wide, so this should scale to all known HW platforms.
 2017-07-08 11:50:48 +02:00
Hamish Willee 7775953289 Fix up airframe URLS to point to the PX4 user guide airframe build info 2017-07-06 22:21:46 +02:00
Daniel Agar b66b734a74 rcS move additional sensors to rc.sensors 2017-07-06 10:05:07 -04:00
Daniel Agar 7029be87c0 MS5525 differential pressure driver 2017-07-06 10:05:07 -04:00
James Goppert 82d7332f1a Remove log profile set to thermal calibration for PX4FMU_V5. 2017-07-06 09:02:13 +02:00
James Goppert d10a491243 Add logging profiles to logger module. 2017-07-06 09:02:13 +02:00
imcnanie 629844adff Dodeca mixer using the AUX channels (#7532) 
* Added Dodecarotor Mixer

* fixed formatting style

* Renamed dodeca mixers to top and bottom
 2017-07-05 22:17:33 +02:00
Mohammed Kabir 0bda4a7edd rc.sensors : correctly start up sensors on AUAV-X2.1 2017-06-29 07:59:56 +05:30
Daniel Agar cd8c8ea5de FW default PWM_RATE 50 2017-06-28 09:13:19 +02:00
Beat Küng 0cfa99436f fix 13001_caipirinha_vtol: class should be VTOL 2017-06-27 11:19:55 +02:00
Lorenz Meier 04f9b0400e Add airframe class to hexa 2017-06-27 11:07:03 +02:00
Lorenz Meier f5ff283f17 Quad: Add vehicle class 2017-06-27 11:07:03 +02:00
Lorenz Meier 2ba65a0dcc Various experimental configs: Add class field 2017-06-27 11:07:03 +02:00
Lorenz Meier 51c7d01a19 Plane configs: Add class field 2017-06-27 11:07:03 +02:00
Lorenz Meier 01c074d9e5 Rover configs: add class field 2017-06-27 11:07:03 +02:00
Lorenz Meier 86acaf0159 Quad configs: add class field 2017-06-27 11:07:03 +02:00
Lorenz Meier 49d6853219 VTOL Configs: Add class field 2017-06-27 11:07:03 +02:00
Lorenz Meier ccc4f24ae8 Wing configs: Add class field 2017-06-27 11:07:03 +02:00
Lorenz Meier b78a138f16 Multicopter configs: Add class field 2017-06-27 11:07:03 +02:00
Lorenz Meier 53cda2de79 HIL configs: Add HIL field 2017-06-27 11:07:03 +02:00
Lorenz Meier 968fa39158 Copter configs: Add airframe class field 2017-06-27 11:07:03 +02:00
Lorenz Meier 0cd954e382 Start SDP3X with priority over the legacy devices 2017-06-11 11:19:25 +02:00
Lorenz Meier fd9f6e9415 ROMFS: Rework airspeed start to include SDP3X 2017-06-11 11:19:25 +02:00
Lorenz Meier a5581c6f25 ROMFS: Fix whitespace in rc.sensors 2017-06-11 11:19:25 +02:00
Lorenz Meier b93e1de883 ROMFS: Do not abort on error 2017-06-11 11:19:25 +02:00
Anton Matosov 890c415ff2 Set acro to allowed max values 2017-06-07 12:20:05 +05:30
Anton Matosov f692b87232 Replace tab with space between param name and value to prevent bricking 2017-06-07 12:20:05 +05:30
Marco Zorzi aef522553e unmanned ground vehicle (UGV) controllers and Traxxas Stampede configuration (#7175) 2017-06-06 13:26:51 -04:00
Lorenz Meier 6fbf09d8da Fix LPE exception handling in ROMFS 2017-06-04 16:59:25 +02:00
Lorenz Meier c9a28fc0eb ROMFS: Reset the estimator param to EKF2 if LPE fails to start 2017-06-04 12:43:28 +02:00
davidaroyer 0de70af78d mixers: add default mixer for Aerotenna OcPoC-Zynq hardware 2017-06-04 04:24:50 +08:00
Lorenz Meier aecfe38f65 BMI055: Allow the independent use of just the gyro driver 2017-06-02 18:41:54 +02:00
Lorenz Meier 5e1490b8a1 BMI055: Ensure that accel and gyro start consistently. 
This was required on a BOSCH board which otherwise could end up mis-detecting the 055 and not running properly
 2017-06-02 18:30:51 +02:00
Mohammed Kabir f97822155a rc.sensors : start external compass on v4Pro and v5 with temperature compensation and self-calibration at startup 2017-05-27 00:31:05 +02:00
Kevin Lopez Alvarez 588a8d3841 px4fmu-v4pro : Add support for ICM20602 2017-05-20 10:23:28 +02:00
Mohammed Kabir d79750a06c camera_feedback : inital module import 2017-05-12 22:11:17 +02:00
Lorenz Meier d31ee73354 FMUv5: Set sdlog mode param 2017-05-07 18:02:24 +02:00
Lorenz Meier 68e76d8ed3 FMUv5: Increase logging throughput considerably. 
This will help to understand the sensor selection on FMUv5 in different airframes. We do have the RAM and CPU to do this on this platform.
 2017-05-07 18:01:51 +02:00
Lorenz Meier 00efbc8049 ROMFS: Start EKF2 if no vehicle config is loaded 
This allows to at least have a look at the attitude and check that the board is functional on a basic level.
 2017-05-02 11:56:45 +02:00
Henry Zhang 92fc82da33 MindPX: Remove MPU6500 driver, use MPU9K driver instead 2017-05-02 11:52:12 +02:00
Lorenz Meier dbf754eab1 ROMFS: If UAVCAN is enabled, reduce log buffer size 
This is necessary to make the space for UAVCAN in memory and doing it this way avoids negatively impacting users who do not use UAVCAN.
 2017-05-02 07:42:14 +02:00
Beat Küng bd0c1cffc2 mount.aux.mix: remove the mode channel 
It does not exist, neither in the actuator group docs, nor in vmount.
 2017-04-25 12:59:12 +02:00
Beat Küng 2ef5ebb6db 4002_quad_x_mount: remove vmount start 
vmount is automatically started now when the param is set from rcS
 2017-04-24 16:46:28 +02:00
Beat Küng 69e8213b37 rcS: set MIXER_AUX to mount if vmount enabled and output is AUX 
This automatically selects the mount aux mixer if mount is enabled via
parameters. A user can customize this by adding a file
 etc/mixers/mount.aux.mix
to the SD card.
 2017-04-24 16:46:28 +02:00
Beat Küng 3f3ac414e3 fix rc.interface: do not append .mix when setting MIXER_AUX 
Because further down the mixer file is set as:
	set MIXER_AUX_FILE /etc/mixers/${MIXER_AUX}.aux.mix
 2017-04-24 16:46:28 +02:00
Lorenz Meier e054d1fff7 FMUv5: Start BMI055 in correct rotation 2017-04-24 10:38:39 +02:00
Lorenz Meier 53bb6c6822 ROMFS: Start ICM on all boards 2017-04-24 10:38:39 +02:00
Sergej Scheiermann 641a03510c changes on drivers according to comments from DavidS 2017-04-24 10:38:39 +02:00
Sergej Scheiermann 5923e66cf3 bmp285 support added 2017-04-24 10:38:39 +02:00
Sergej Scheiermann c3711efd27 initial commit of bmm150 2017-04-24 10:38:39 +02:00
Sergej Scheiermann dad5224206 bmi055 added to start-up script 2017-04-24 10:38:39 +02:00
Mohamed Abdelkader Zahana da8724accb removing pwm_start block; not needed in i2c 2017-04-23 23:29:10 +02:00
Mohamed Abdelkader Zahana 60e0ca9321 add both options (pwm/i2c) for lidar lite 2017-04-23 23:29:10 +02:00
Mohamed Abdelkader Zahana 9911a55393 use i2c for lidar lite 2017-04-23 23:29:10 +02:00
Lorenz Meier 3d65fcc875 Mount mixer: Fix channel output order 2017-04-23 15:19:08 +02:00
Sander Smeets 6c6cfd4f65 DeltaQuad updated params 2017-04-21 18:13:35 +02:00
Andrew C. Smith d21b6655d2 Add the Gumstix AeroCore2 to the build system. 2017-04-20 12:24:27 -10:00
Beat Küng 36b2643402 rcS: make sure if 'vmount start' fails, boot is not aborted 2017-04-20 08:29:00 +02:00
Julian Oes 349a468f81 vmount: add to startup script, disable by default 
vmount is now added to the startup script, however, it will only start
if the param MNT_MODE_IN is set to anything but -1.
 2017-04-19 16:59:48 +02:00
Beat Küng 89c24cd697 13001_caipirinha_vtol config: fix motor assignment documentation 2017-04-18 11:58:18 +02:00
Beat Küng 1df9742219 airframes: add @output meta-data 2017-04-18 11:58:18 +02:00
Beat Küng ce2502a74c rc.interface: fix indentation 2017-04-18 11:58:18 +02:00
Beat Küng a73c0d469b airframe configs Quadrotor x: fix @output tags 
extend where needed, only keep the full list for 4001 (and 4002 which differs)
 2017-04-18 11:58:18 +02:00
Beat Küng e30d3a53f5 airframe configs: move 4002_qavr5 to 4003_qavr5 
There was already an airframe with id 4002.
 2017-04-18 11:58:18 +02:00
Mohammed Kabir 95778c74e2 rcS : properly handle trigger/actuator pin mixing 2017-04-13 20:21:40 +02:00
ChristophTobler 232f428f6e add ll40ls for Aerofc 2017-04-10 20:20:36 +02:00
James Goppert 955749ed6f Add iris_rplidar model (#6558) 
* Whitespace cleanup and add config for rplidar.

* Add rplidar target.

* Disable gps for rplidar.
 2017-04-10 03:06:21 -04:00
sirPerna 94ef3db407 autostart external airspeed sensor on i2c port 2 2017-04-07 07:34:39 +02:00
David Sidrane cc04dfd27b Added set [{+|-}{e|x|xe|ex}] [<name> <value>] to nsh (#6985) 
* NSH Added support for set [{+|-}{e|x|xe|ex}] [<name> <value>]

   Set the 'exit on error control' and/or 'print a trace' of
   commands when parsing scripts in NSH.
   The settinngs are in effect from the point of exection,
   until they are changed again, or in the case of the init
   script, the settings are returned to the default settings
   when it exits.

   Included child scripts will run with the parents settings
   and changes made in the child script will effect the parent
   on return.

   Use 'set -e' to enable and 'set +e' to disable (ignore) the exit
   condition on commands. The default is -e. Errors cause script to
   exit.

   Use 'set -x' to enable and 'set +x' to disable (silence) printing
   a trace of the script commands as they are ececuted. The default
   is +x. No printing of a trace of script commands as they are
   executed.

  Print expanded variables if -x

* Added comments only on how to use the set +e and and set -x

* Spelling NSH_PFALG_* -> NSH_PFLAG_*
 2017-04-06 03:42:16 -10:00
Beat Küng 882c5bbdc9 4070_aerofc: update MPC and LND parameters 2017-04-06 12:18:30 +02:00
Lucas De Marchi 06408b8a4e ROMFS: allow to run without sercon 2017-04-06 12:18:30 +02:00
Lucas De Marchi c39e9a9695 ROMFS: aerofc: set default EKF2 params 2017-04-06 12:18:30 +02:00
Lucas De Marchi 3c48aa4cf1 aerofc: use MPU9250 driver 2017-04-06 12:18:30 +02:00
Lucas De Marchi e535156599 ROMFS: set baudrate to 460800 for aerofc 
We are getting way to much transfer errors with high baudrate
 2017-04-06 12:18:30 +02:00
bresch 12182ec1fc Increase max yawrate default parameters for standard delta VTOL 
MC_YAWRATE_MAX 20  => 50

Signed-off-by: bresch <brescianimathieu@gmail.com>
 2017-04-06 12:13:14 +02:00
Lorenz Meier bbd1906dfb Add Rover SITL config 2017-04-02 21:52:18 +02:00
Beat Küng d72133a380 rcS: increase log buffer by 4kB 
To reduce dropouts, and because we have enough RAM :)
 2017-03-29 23:02:09 +02:00
Sander Smeets fc71ef98bb DeltaQuad params (#6894) 
DeltaQuad params
 2017-03-25 02:06:19 +01:00
Matthias Grob bfb4de0e66 startup scripts/mc_pos_control: renamed parameters after refactor 2017-03-22 15:21:34 +01:00
Henry Zhang 6791090fe3 add new config for NanoMind (#6874) 2017-03-22 01:46:13 -04:00
Pavel Kirienko 2b2c307eac Performance audit (intentionally duplicates #6829) (#6847) 
* UAVCAN ESC output: removing ESC output channels from published message that are always zero. This allows the UAVCAN stack to always transfer only the minimum number of output values, avoiding redundant zeroes and the associated increase in bus load and CPU time

* Added a separate mixer file for CAN quadrotor

* Sampling profiler improvements

* PMSP: Output more endpoints

* Matrix update

* libc usage workaround

* Removed UAVCAN perfcounters

* Matrix submodule update
 2017-03-18 04:16:20 -10:00
David Sidrane c20b85e6ad Revert "UAVCAN performance audit (#6829)" (#6846) 
This reverts commit 21e04c9f7a.
 2017-03-18 04:04:43 -10:00
Pavel Kirienko 21e04c9f7a UAVCAN performance audit (#6829) 
* UAVCAN ESC output: removing ESC output channels from published message that are always zero. This allows the UAVCAN stack to always transfer only the minimum number of output values, avoiding redundant zeroes and the associated increase in bus load and CPU time

* Added a separate mixer file for CAN quadrotor

* Sampling profiler improvements

* PMSP: Output more endpoints

* Matrix update

* libc usage workaround

* Removed UAVCAN perfcounters
 2017-03-18 03:47:09 -10:00
Beat Küng b1be963083 px4fmu_test rcS: switch to led_control command 2017-03-12 00:08:35 +01:00
José Roberto de Souza 07921c9f3a aerofc: Use ram_flash dataman backend 2017-03-10 11:31:07 +01:00
Beat Küng bac10bcfb8 rcS: do not wipe flight time param on autoconf 2017-03-08 04:19:22 +08:00
Beat Küng 8957b473a8 px4fmu rcS: start sensors in hil mode if HIL is set, don't load rc.sensors 
This makes sure no sensor publishes sensor topics, instead they will be
published from mavlink.
 2017-03-04 05:59:10 +08:00
José Roberto de Souza 8d50249e8f ROMFS: common: Start aerofc_adc in AeroFC 
Probably this was a merge error.
 2017-02-23 22:37:01 +01:00
José Roberto de Souza b1c11b14a8 ROMFS: common: AeroFC: Do not start MAVLink over USB 
STM32 pins are not exposed in AeroFC, so lets save some memory here.
 2017-02-23 08:26:42 +01:00
Andreas Antener bd0cd35ff8 Convergence: fix motor output meta data 2017-02-18 08:03:19 +01:00
Andreas Antener 8683739fec Convergence: updated tuning 2017-02-18 08:03:19 +01:00
Andreas Antener 2f3b1edbd4 Convergence: increase yaw output in mixer 2017-02-18 08:03:19 +01:00
Phillip Kocmoud e4afce8b1b Add the 20602 start command for the AUAV x2.1 to the ROMFS rc.sensors file 2017-02-17 09:18:22 +01:00
Lucas De Marchi 6121119631 ROMFS: allow to use 460800 baudrate for onboard mode 2017-02-16 09:35:23 +01:00
José Roberto de Souza b7c53342dc ROMFS: AeroFC: Start dataman with RAM backend 
AeroFC don't have a SD Card or any other storage device, so changing
dataman backend to work over RAM to be able to load missions.
 2017-02-15 21:13:13 +01:00
Phillip Kocmoud ccfecd4ad2 Add support for the ICM-20602 to the Pixracer FMUv4 (#6577) 
The current ICM-20608 is nearing EOL.

I have tested on both ICM-20608 and ICM-20602 based Pixracers.
 2017-02-14 06:37:04 -10:00
klopezal f09b60ad9e lis3mdl : several fixes and enhancements 2017-02-12 13:52:41 +01:00
Lucas De Marchi 72e628f6e0 aerofc: use autodetection for MS5611 driver 2017-02-09 21:30:19 +01:00
Daniel Agar 317595cff3 SYS_COMPANION add 115200 normal telem 2017-02-08 08:35:29 +01:00
Beat Küng b6f3cf9425 events: refactor temperature_calibration command to take options and use a single vehicle_command 
This makes it easier to start calibration for all sensors at once.
 2017-02-02 23:54:06 +01:00
Paul Riseborough 8001db257c ROMFS: enable auto start of thermal calibration 2017-02-02 23:54:06 +01:00
Lucas De Marchi d6ef703fa4 aerofc: disable internal compass (#6485) 
It uses a shared I2C bus with MS65611 which causes noise on the baro
reads. This will rely on the external compass instead of the internal
one.
 2017-01-31 07:07:52 -10:00
José Roberto de Souza 37f73bb0ed ROMFS: aerofc: Only start logger with MAVLink support 
AeroFC don't have SDCard to store logs.
 2017-01-28 11:03:07 +01:00
José Roberto de Souza 340be986a6 ROMFS: aerofc: Switch from sdlog2 to logger 
Logger have adds support of ULog over MAVLink and it will be used in AeroFC.
 2017-01-28 11:03:07 +01:00
Lorenz Meier fd6b051895 Start send_events in work queue 2017-01-25 22:43:29 +01:00
Paul Riseborough d8c046e47c ROMFS: add thermal calibration logging mode 2017-01-21 11:48:03 +01:00
Lorenz Meier a3515893f3 ROMFS: Disable AR Drone and micro PCB quad for frames not supporting them 2017-01-19 19:24:52 +01:00
FantasyJXF 3f94818dcf spelling error; 
as it is
 2017-01-16 03:11:03 -08:00
Henry Zhang e81548bdb9 MindPX: Fix for hmc5883 rotation 2017-01-16 00:19:03 -08:00
CarlOlsson 0d3fd77ba9 mixer: Removed the pitch offset in the mixer file for the TBS Caipirinha since it should be handled by either hardware installation or trim parameter 
Signed-off-by: CarlOlsson <carlolsson.co@gmail.com>
 2017-01-12 13:35:30 -08:00
Bart Slinger ff560e8c16 Blade130X heli meta-data 2017-01-06 10:01:46 +01:00