forked from Archive/PX4-Autopilot
Add the Gumstix AeroCore2 to the build system.
This commit is contained in:
Andrew C. Smith
David Sidrane
parent
05cf34a510
commit
d21b6655d2
|
|
@ -0,0 +1,12 @@
|
|||
{
|
||||
"board_id": 98,
|
||||
"magic": "AeroCore2",
|
||||
"description": "Firmware for the Gumstix AeroCore2 board",
|
||||
"image": "",
|
||||
"build_time": 0,
|
||||
"summary": "AEROCORE2",
|
||||
"version": "0.1",
|
||||
"image_size": 0,
|
||||
"git_identity": "",
|
||||
"board_revision": 0
|
||||
}
|
||||
1
Makefile
1
Makefile
|
|
@ -192,6 +192,7 @@ qgc_firmware: \
|
|||
check_px4fmu-v3_default \
|
||||
check_px4fmu-v4_default \
|
||||
check_tap-v1_default \
|
||||
check_aerocore2_default \
|
||||
check_sizes
|
||||
|
||||
# Other NuttX firmware
|
||||
|
|
|
|||
|
|
@ -370,6 +370,12 @@ then
|
|||
fi
|
||||
fi
|
||||
|
||||
if ver hwcmp AEROCORE2
|
||||
then
|
||||
l3gd20 -R 12 start
|
||||
lsm303d start
|
||||
fi
|
||||
|
||||
if meas_airspeed start
|
||||
then
|
||||
else
|
||||
|
|
|
|||
|
|
@ -233,6 +233,11 @@ then
|
|||
then
|
||||
set USE_IO no
|
||||
fi
|
||||
|
||||
if ver hwcmp AEROCORE2
|
||||
then
|
||||
set USE_IO no
|
||||
fi
|
||||
else
|
||||
set USE_IO no
|
||||
fi
|
||||
|
|
@ -413,6 +418,10 @@ then
|
|||
then
|
||||
set DATAMAN_OPT -i
|
||||
fi
|
||||
if ver hwcmp AEROCORE2
|
||||
then
|
||||
set DATAMAN_OPT "-f /fs/mtd_dataman"
|
||||
fi
|
||||
# waypoint storage
|
||||
# REBOOTWORK this needs to start in parallel
|
||||
if dataman start $DATAMAN_OPT
|
||||
|
|
@ -1084,11 +1093,18 @@ then
|
|||
# CF2 shouldn't have an sd card
|
||||
else
|
||||
|
||||
# Run no SD alarm
|
||||
if [ $LOG_FILE == /dev/null ]
|
||||
if ver hwcmp AEROCORE2
|
||||
then
|
||||
# Play SOS
|
||||
tone_alarm error
|
||||
# AEROCORE2 shouldn't have an sd card
|
||||
else
|
||||
|
||||
# Run no SD alarm
|
||||
if [ $LOG_FILE == /dev/null ]
|
||||
then
|
||||
# Play SOS
|
||||
tone_alarm error
|
||||
fi
|
||||
|
||||
fi
|
||||
|
||||
fi
|
||||
|
|
|
|||
|
|
@ -105,7 +105,7 @@ def main():
|
|||
args.port = "/dev/tty.usbmodem1"
|
||||
else:
|
||||
serial_list = mavutil.auto_detect_serial(preferred_list=['*FTDI*',
|
||||
"*Arduino_Mega_2560*", "*3D_Robotics*", "*USB_to_UART*", '*PX4*', '*FMU*'])
|
||||
"*Arduino_Mega_2560*", "*3D_Robotics*", "*USB_to_UART*", '*PX4*', '*FMU*', "*Gumstix*"])
|
||||
|
||||
if len(serial_list) == 0:
|
||||
print("Error: no serial connection found")
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@ fi
|
|||
|
||||
if [ $SYSTYPE = "Linux" ];
|
||||
then
|
||||
SERIAL_PORTS="/dev/serial/by-id/*_PX4_*,/dev/serial/by-id/usb-3D_Robotics*,/dev/serial/by-id/usb-The_Autopilot*,/dev/serial/by-id/usb-Bitcraze*,/dev/serial/by-id/pci-Bitcraze*,"
|
||||
SERIAL_PORTS="/dev/serial/by-id/*_PX4_*,/dev/serial/by-id/usb-3D_Robotics*,/dev/serial/by-id/usb-The_Autopilot*,/dev/serial/by-id/usb-Bitcraze*,/dev/serial/by-id/pci-Bitcraze*,/dev/serial/by-id/usb-Gumstix*,"
|
||||
fi
|
||||
|
||||
if [ $SYSTYPE = "" ];
|
||||
|
|
|
|||
|
|
@ -509,6 +509,7 @@ function(px4_add_upload)
|
|||
/dev/serial/by-id/usb-Bitcraze*
|
||||
/dev/serial/by-id/pci-3D_Robotics*
|
||||
/dev/serial/by-id/pci-Bitcraze*
|
||||
/dev/serial/by-id/usb-Gumstix*
|
||||
)
|
||||
elseif(${CMAKE_HOST_SYSTEM_NAME} STREQUAL "Darwin")
|
||||
list(APPEND serial_ports
|
||||
|
|
|
|||
|
|
@ -0,0 +1,192 @@
|
|||
include(nuttx/px4_impl_nuttx)
|
||||
|
||||
px4_nuttx_configure(HWCLASS m4 CONFIG nsh ROMFS y ROMFSROOT px4fmu_common)
|
||||
|
||||
set(CMAKE_TOOLCHAIN_FILE ${PX4_SOURCE_DIR}/cmake/toolchains/Toolchain-arm-none-eabi.cmake)
|
||||
|
||||
set(config_uavcan_num_ifaces 2)
|
||||
|
||||
set(config_module_list
|
||||
#
|
||||
# Board support modules
|
||||
#
|
||||
drivers/device
|
||||
drivers/stm32
|
||||
drivers/stm32/adc
|
||||
drivers/stm32/tone_alarm
|
||||
drivers/led
|
||||
drivers/px4fmu
|
||||
drivers/boards/aerocore2
|
||||
drivers/lsm303d
|
||||
drivers/l3gd20
|
||||
drivers/ms5611
|
||||
drivers/trone
|
||||
drivers/gps
|
||||
drivers/pwm_out_sim
|
||||
drivers/airspeed
|
||||
drivers/ets_airspeed
|
||||
drivers/meas_airspeed
|
||||
#drivers/frsky_telemetry
|
||||
modules/sensors
|
||||
#drivers/pwm_input
|
||||
#drivers/camera_trigger
|
||||
drivers/bst
|
||||
|
||||
#
|
||||
# System commands
|
||||
#
|
||||
systemcmds/bl_update
|
||||
systemcmds/config
|
||||
#systemcmds/dumpfile
|
||||
#systemcmds/esc_calib
|
||||
systemcmds/mixer
|
||||
#systemcmds/motor_ramp
|
||||
systemcmds/mtd
|
||||
systemcmds/nshterm
|
||||
systemcmds/param
|
||||
systemcmds/perf
|
||||
systemcmds/pwm
|
||||
systemcmds/reboot
|
||||
#systemcmds/sd_bench
|
||||
systemcmds/top
|
||||
#systemcmds/topic_listener
|
||||
systemcmds/ver
|
||||
|
||||
#
|
||||
# Testing
|
||||
#
|
||||
#drivers/sf0x/sf0x_tests
|
||||
#drivers/test_ppm
|
||||
#lib/rc/rc_tests
|
||||
#modules/commander/commander_tests
|
||||
#modules/controllib_test
|
||||
#modules/mavlink/mavlink_tests
|
||||
#modules/unit_test
|
||||
#modules/uORB/uORB_tests
|
||||
#systemcmds/tests
|
||||
|
||||
#
|
||||
# General system control
|
||||
#
|
||||
modules/commander
|
||||
modules/load_mon
|
||||
modules/navigator
|
||||
modules/mavlink
|
||||
modules/uavcan
|
||||
modules/land_detector
|
||||
|
||||
#
|
||||
# Estimation modules
|
||||
#
|
||||
#modules/attitude_estimator_q
|
||||
#modules/position_estimator_inav
|
||||
#modules/local_position_estimator
|
||||
modules/ekf2
|
||||
|
||||
#
|
||||
# Vehicle Control
|
||||
#
|
||||
modules/fw_pos_control_l1
|
||||
modules/fw_att_control
|
||||
modules/mc_att_control
|
||||
modules/mc_pos_control
|
||||
modules/vtol_att_control
|
||||
|
||||
#
|
||||
# Logging
|
||||
#
|
||||
#modules/logger
|
||||
modules/sdlog2
|
||||
|
||||
#
|
||||
# Library modules
|
||||
#
|
||||
modules/param
|
||||
modules/systemlib
|
||||
modules/systemlib/mixer
|
||||
modules/uORB
|
||||
modules/dataman
|
||||
|
||||
#
|
||||
# Libraries
|
||||
#
|
||||
lib/controllib
|
||||
lib/mathlib
|
||||
lib/mathlib/math/filter
|
||||
lib/rc
|
||||
lib/ecl
|
||||
lib/external_lgpl
|
||||
lib/geo
|
||||
lib/geo_lookup
|
||||
lib/conversion
|
||||
lib/launchdetection
|
||||
lib/led
|
||||
lib/terrain_estimation
|
||||
lib/runway_takeoff
|
||||
lib/tailsitter_recovery
|
||||
lib/version
|
||||
lib/DriverFramework/framework
|
||||
platforms/nuttx
|
||||
|
||||
# had to add for cmake, not sure why wasn't in original config
|
||||
platforms/common
|
||||
platforms/nuttx/px4_layer
|
||||
|
||||
#
|
||||
# OBC challenge
|
||||
#
|
||||
#modules/bottle_drop
|
||||
|
||||
#
|
||||
# Rover apps
|
||||
#
|
||||
#examples/rover_steering_control
|
||||
|
||||
#
|
||||
# Demo apps
|
||||
#
|
||||
#examples/math_demo
|
||||
# Tutorial code from
|
||||
# https://px4.io/dev/px4_simple_app
|
||||
#examples/px4_simple_app
|
||||
|
||||
# Tutorial code from
|
||||
# https://px4.io/dev/daemon
|
||||
#examples/px4_daemon_app
|
||||
|
||||
# Tutorial code from
|
||||
# https://px4.io/dev/debug_values
|
||||
#examples/px4_mavlink_debug
|
||||
|
||||
# Tutorial code from
|
||||
# https://px4.io/dev/example_fixedwing_control
|
||||
#examples/fixedwing_control
|
||||
|
||||
# Hardware test
|
||||
#examples/hwtest
|
||||
)
|
||||
|
||||
set(config_extra_builtin_cmds
|
||||
serdis
|
||||
sercon
|
||||
)
|
||||
|
||||
set(config_extra_libs
|
||||
uavcan
|
||||
uavcan_stm32_driver
|
||||
)
|
||||
|
||||
set(config_io_extra_libs
|
||||
)
|
||||
|
||||
add_custom_target(sercon)
|
||||
set_target_properties(sercon PROPERTIES
|
||||
PRIORITY "SCHED_PRIORITY_DEFAULT"
|
||||
MAIN "sercon" STACK_MAIN "2048"
|
||||
COMPILE_FLAGS "-Os")
|
||||
|
||||
add_custom_target(serdis)
|
||||
set_target_properties(serdis PROPERTIES
|
||||
PRIORITY "SCHED_PRIORITY_DEFAULT"
|
||||
MAIN "serdis" STACK_MAIN "2048"
|
||||
COMPILE_FLAGS "-Os")
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see misc/tools/kconfig-language.txt.
|
||||
#
|
||||
|
||||
|
|
@ -0,0 +1,290 @@
|
|||
/************************************************************************************
|
||||
* nuttx-configs/aerocore/include/board.h
|
||||
* include/arch/board/board.h
|
||||
*
|
||||
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_BOARD_BOARD_H
|
||||
#define __ARCH_BOARD_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#ifndef __ASSEMBLY__
|
||||
# include <stdint.h>
|
||||
#endif
|
||||
|
||||
#include <stm32.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
/* The AeroCore uses a 24MHz crystal connected to the HSE.
|
||||
*
|
||||
* This is the "standard" configuration as set up by arch/arm/src/stm32f40xx_rcc.c:
|
||||
* System Clock source : PLL (HSE)
|
||||
* SYSCLK(Hz) : 168000000 Determined by PLL configuration
|
||||
* HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE)
|
||||
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
|
||||
* APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1)
|
||||
* APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2)
|
||||
* HSE Frequency(Hz) : 24000000 (STM32_BOARD_XTAL)
|
||||
* PLLM : 24 (STM32_PLLCFG_PLLM)
|
||||
* PLLN : 336 (STM32_PLLCFG_PLLN)
|
||||
* PLLP : 2 (STM32_PLLCFG_PLLP)
|
||||
* PLLQ : 7 (STM32_PLLCFG_PPQ)
|
||||
* Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK
|
||||
* Flash Latency(WS) : 5
|
||||
* Prefetch Buffer : OFF
|
||||
* Instruction cache : ON
|
||||
* Data cache : ON
|
||||
* Require 48MHz for USB OTG FS, : Enabled
|
||||
* SDIO and RNG clock
|
||||
*/
|
||||
|
||||
/* HSI - 16 MHz RC factory-trimmed
|
||||
* LSI - 32 KHz RC
|
||||
* HSE - On-board crystal frequency is 24MHz
|
||||
* LSE - not installed
|
||||
*/
|
||||
|
||||
#define STM32_BOARD_XTAL 24000000ul
|
||||
|
||||
#define STM32_HSI_FREQUENCY 16000000ul
|
||||
#define STM32_LSI_FREQUENCY 32000
|
||||
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
|
||||
|
||||
/* Main PLL Configuration.
|
||||
*
|
||||
* PLL source is HSE
|
||||
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
|
||||
* = (24,000,000 / 24) * 336
|
||||
* = 336,000,000
|
||||
* SYSCLK = PLL_VCO / PLLP
|
||||
* = 336,000,000 / 2 = 168,000,000
|
||||
* USB OTG FS, SDIO and RNG Clock
|
||||
* = PLL_VCO / PLLQ
|
||||
* = 48,000,000
|
||||
*/
|
||||
|
||||
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(24)
|
||||
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
|
||||
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
|
||||
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
|
||||
|
||||
#define STM32_SYSCLK_FREQUENCY 168000000ul
|
||||
|
||||
/* AHB clock (HCLK) is SYSCLK (168MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||||
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
||||
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
|
||||
|
||||
/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
|
||||
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
|
||||
|
||||
/* Timers driven from APB1 will be twice PCLK1 */
|
||||
|
||||
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||
|
||||
/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
|
||||
|
||||
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
|
||||
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||
|
||||
/* Timers driven from APB2 will be twice PCLK2 */
|
||||
|
||||
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||
|
||||
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
||||
* otherwise frequency is 2xAPBx.
|
||||
* Note: TIM1,8 are on APB2, others on APB1
|
||||
*/
|
||||
|
||||
#define STM32_TIM18_FREQUENCY (2*STM32_PCLK2_FREQUENCY)
|
||||
#define STM32_TIM27_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
|
||||
|
||||
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
||||
* otherwise frequency is 2xAPBx.
|
||||
* Note: TIM1,8-11 are on APB2, others on APB1
|
||||
*/
|
||||
|
||||
#define BOARD_TIM1_FREQUENCY STM32_APB2_TIM1_CLKIN
|
||||
#define BOARD_TIM2_FREQUENCY STM32_APB1_TIM2_CLKIN
|
||||
#define BOARD_TIM3_FREQUENCY STM32_APB1_TIM3_CLKIN
|
||||
#define BOARD_TIM4_FREQUENCY STM32_APB1_TIM4_CLKIN
|
||||
#define BOARD_TIM5_FREQUENCY STM32_APB1_TIM5_CLKIN
|
||||
#define BOARD_TIM6_FREQUENCY STM32_APB1_TIM6_CLKIN
|
||||
#define BOARD_TIM7_FREQUENCY STM32_APB1_TIM7_CLKIN
|
||||
#define BOARD_TIM8_FREQUENCY STM32_APB2_TIM8_CLKIN
|
||||
#define BOARD_TIM9_FREQUENCY STM32_APB2_TIM9_CLKIN
|
||||
#define BOARD_TIM10_FREQUENCY STM32_APB2_TIM10_CLKIN
|
||||
#define BOARD_TIM11_FREQUENCY STM32_APB2_TIM11_CLKIN
|
||||
#define BOARD_TIM12_FREQUENCY STM32_APB1_TIM12_CLKIN
|
||||
#define BOARD_TIM13_FREQUENCY STM32_APB1_TIM13_CLKIN
|
||||
#define BOARD_TIM14_FREQUENCY STM32_APB1_TIM14_CLKIN
|
||||
|
||||
/* Alternate function pin selections ************************************************/
|
||||
|
||||
/*
|
||||
* UARTs.
|
||||
*/
|
||||
/* USART1 on PB[6,7]: GPS */
|
||||
#define GPIO_USART1_RX GPIO_USART1_RX_2
|
||||
#define GPIO_USART1_TX GPIO_USART1_TX_2
|
||||
|
||||
/* USART2 on PD[5,6]: J9 */
|
||||
#define GPIO_USART2_RX GPIO_USART2_RX_2
|
||||
#define GPIO_USART2_TX GPIO_USART2_TX_2
|
||||
#define GPIO_USART2_CTS 0 // unused
|
||||
#define GPIO_USART2_RTS 0 // unused
|
||||
|
||||
/* USART3 on PD[8,9]: to Gumstix UART2 */
|
||||
#define GPIO_USART3_RX GPIO_USART3_RX_3
|
||||
#define GPIO_USART3_TX GPIO_USART3_TX_3
|
||||
#define GPIO_USART3_CTS 0 // unused
|
||||
#define GPIO_USART3_RTS 0 // unused
|
||||
|
||||
/* UART7 on PE[78]: J7 Breakout */
|
||||
#define GPIO_UART7_RX GPIO_UART7_RX_1
|
||||
#define GPIO_UART7_TX GPIO_UART7_TX_1
|
||||
|
||||
/*
|
||||
* UART8 on PE[0-1]: Spektrum Receiver
|
||||
* No alternate pin config
|
||||
*/
|
||||
|
||||
/* USART[1,6] require a RX DMA configuration */
|
||||
#define DMAMAP_USART1_RX DMAMAP_USART1_RX_2
|
||||
#define DMAMAP_USART6_RX DMAMAP_USART6_RX_2
|
||||
|
||||
/*
|
||||
* CAN1 on PD[0-1]
|
||||
*/
|
||||
#define GPIO_CAN1_RX GPIO_CAN1_RX_3
|
||||
#define GPIO_CAN1_TX GPIO_CAN1_TX_3
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*
|
||||
* The optional _GPIO configurations allow the I2C driver to manually
|
||||
* reset the bus to clear stuck slaves. They match the pin configuration,
|
||||
* but are normally-high GPIOs.
|
||||
*/
|
||||
|
||||
/* PB[10-11]: I2C2 is broken out on J9 header */
|
||||
#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1
|
||||
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1
|
||||
#define GPIO_I2C2_SCL_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN10)
|
||||
#define GPIO_I2C2_SDA_GPIO (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN11)
|
||||
|
||||
/*
|
||||
* SPI
|
||||
*/
|
||||
/* PA[4-7] SPI1 broken out on J12 */
|
||||
#define GPIO_SPI1_NSS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4) /* should be GPIO_SPI1_NSS_2 but use as a GPIO */
|
||||
#define GPIO_SPI1_SCK (GPIO_SPI1_SCK_1|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI1_MISO (GPIO_SPI1_MISO_1|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI1_MOSI (GPIO_SPI1_MOSI_1|GPIO_SPEED_50MHz)
|
||||
|
||||
/* PB[12-15]: SPI2 connected to DuoVero SPI1 */
|
||||
#define GPIO_SPI2_NSS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN12) /* should be GPIO_SPI2_NSS_2 but use as a GPIO */
|
||||
#define GPIO_SPI2_SCK (GPIO_SPI2_SCK_2|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI2_MISO (GPIO_SPI2_MISO_1|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI2_MOSI (GPIO_SPI2_MOSI_1|GPIO_SPEED_50MHz)
|
||||
|
||||
/* PC[10-12]: SPI3 connected to onboard sensors */
|
||||
#define GPIO_SPI3_SCK (GPIO_SPI3_SCK_2|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI3_MISO (GPIO_SPI3_MISO_2|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI3_MOSI (GPIO_SPI3_MOSI_2|GPIO_SPEED_50MHz)
|
||||
|
||||
/* PE[11-14]: SPI4 connected to FRAM */
|
||||
#define GPIO_SPI4_NSS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN11) /* should be GPIO_SPI4_NSS_2 but use as a GPIO */
|
||||
#define GPIO_SPI4_SCK (GPIO_SPI4_SCK_2|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI4_MISO (GPIO_SPI4_MISO_2|GPIO_SPEED_50MHz)
|
||||
#define GPIO_SPI4_MOSI (GPIO_SPI4_MOSI_2|GPIO_SPEED_50MHz)
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN void stm32_boardinitialize(void);
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __ARCH_BOARD_BOARD_H */
|
||||
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2013 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* nsh_romfsetc.h
|
||||
*
|
||||
* This file is a stub for 'make export' purposes; the actual ROMFS
|
||||
* must be supplied by the library client.
|
||||
*/
|
||||
|
||||
extern unsigned char romfs_img[];
|
||||
extern unsigned int romfs_img_len;
|
||||
|
|
@ -0,0 +1,165 @@
|
|||
############################################################################
|
||||
# nuttx-configs/aerocore2/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include $(TOPDIR)/PX4_Warnings.mk
|
||||
include $(TOPDIR)/PX4_Config.mk
|
||||
|
||||
#
|
||||
# We only support building with the ARM bare-metal toolchain from
|
||||
# https://launchpad.net/gcc-arm-embedded on Windows, Linux or Mac OS.
|
||||
#
|
||||
CONFIG_ARMV7M_TOOLCHAIN := GNU_EABI${HOST_OS_FIRST_LETTER}
|
||||
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
MAXOPTIMIZATION = -Os
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m4 \
|
||||
-mthumb \
|
||||
-march=armv7e-m \
|
||||
-mfpu=fpv4-sp-d16 \
|
||||
-mfloat-abi=hard
|
||||
|
||||
# Enable precise stack overflow tracking
|
||||
|
||||
ifeq ($(CONFIG_ARMV7M_STACKCHECK),y)
|
||||
INSTRUMENTATIONDEFINES = -finstrument-functions -ffixed-r10
|
||||
endif
|
||||
|
||||
# Pull in *just* libm from the toolchain ... this is grody
|
||||
|
||||
LIBM = "${shell $(CC) $(ARCHCPUFLAGS) -print-file-name=libm.a}"
|
||||
EXTRA_LIBS += $(LIBM)
|
||||
|
||||
# Use our linker script
|
||||
|
||||
LDSCRIPT = ld.script
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
else
|
||||
ifeq ($(PX4_WINTOOL),y)
|
||||
# Windows-native toolchains (MSYS)
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
endif
|
||||
|
||||
# Tool versions
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
# Optimization flags
|
||||
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) \
|
||||
-fno-strict-aliasing \
|
||||
-fno-strength-reduce \
|
||||
-fomit-frame-pointer \
|
||||
-funsafe-math-optimizations \
|
||||
-fno-builtin-printf \
|
||||
-ffunction-sections \
|
||||
-fdata-sections
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION += -g
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -std=gnu99
|
||||
ARCHCXXFLAGS = -fno-exceptions -fno-rtti -std=gnu++0x
|
||||
ARCHWARNINGS = $(PX4_ARCHWARNINGS)
|
||||
ARCHCWARNINGS = $(PX4_ARCHWARNINGS) $(PX4_ARCHCWARNINGS)
|
||||
ARCHWARNINGSXX = $(ARCHWARNINGS) $(PX4_ARCHWARNINGSXX)
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
# This seems to be the only way to add linker flags
|
||||
|
||||
EXTRA_LIBS += --warn-common \
|
||||
--gc-sections
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHCWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -fno-common
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(INSTRUMENTATIONDEFINES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
# Produce partially-linked $1 from files in $2
|
||||
|
||||
define PRELINK
|
||||
@echo "PRELINK: $1"
|
||||
$(Q) $(LD) -Ur -o $1 $2 && $(OBJCOPY) --localize-hidden $1
|
||||
endef
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,63 @@
|
|||
#!/bin/bash
|
||||
# nuttx-configs/aerocore2/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin
|
||||
|
||||
# This the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
|
|
@ -0,0 +1,159 @@
|
|||
/****************************************************************************
|
||||
* nuttx-configs/aerocore2/scripts/ld.script
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F427 has 2048Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 256Kb of SRAM. SRAM is split up into three blocks:
|
||||
*
|
||||
* 1) 112Kb of SRAM beginning at address 0x2000:0000
|
||||
* 2) 16Kb of SRAM beginning at address 0x2001:c000
|
||||
* 3) 64Kb of SRAM beginning at address 0x2002:0000
|
||||
* 4) 64Kb of TCM SRAM beginning at address 0x1000:0000
|
||||
*
|
||||
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
||||
* where the code expects to begin execution by jumping to the entry point in
|
||||
* the 0x0800:0000 address range.
|
||||
*
|
||||
* The first 0x4000 of flash is reserved for the bootloader.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
/* disabled due to silicon errata flash (rx) : ORIGIN = 0x08004000, LENGTH = 2032K */
|
||||
flash (rx) : ORIGIN = 0x08004000, LENGTH = 1008K
|
||||
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 192K
|
||||
ccsram (rwx) : ORIGIN = 0x10000000, LENGTH = 64K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
|
||||
ENTRY(__start) /* treat __start as the anchor for dead code stripping */
|
||||
EXTERN(_vectors) /* force the vectors to be included in the output */
|
||||
|
||||
/*
|
||||
* Ensure that abort() is present in the final object. The exception handling
|
||||
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
|
||||
*/
|
||||
EXTERN(abort)
|
||||
EXTERN(_bootdelay_signature)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
. = ALIGN(32);
|
||||
/*
|
||||
This signature provides the bootloader with a way to delay booting
|
||||
*/
|
||||
_bootdelay_signature = ABSOLUTE(.);
|
||||
FILL(0xffecc2925d7d05c5)
|
||||
. += 8;
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
|
||||
/*
|
||||
* This is a hack to make the newlib libm __errno() call
|
||||
* use the NuttX get_errno_ptr() function.
|
||||
*/
|
||||
__errno = get_errno_ptr;
|
||||
} > flash
|
||||
|
||||
/*
|
||||
* Init functions (static constructors and the like)
|
||||
*/
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
KEEP(*(.init_array .init_array.*))
|
||||
_einit = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
/*
|
||||
* Construction data for parameters.
|
||||
*/
|
||||
__param ALIGN(4): {
|
||||
__param_start = ABSOLUTE(.);
|
||||
KEEP(*(__param*))
|
||||
__param_end = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > flash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > flash
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
|
|
@ -0,0 +1,86 @@
|
|||
############################################################################
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = empty.c
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
|
||||
else
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
$(call ARCHIVE, $@, $(OBJS))
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
$(Q) touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
$(call DELFILE, libboard$(LIBEXT))
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
$(call DELFILE, Make.dep)
|
||||
$(call DELFILE, .depend)
|
||||
|
||||
ifneq ($(BOARD_CONTEXT),y)
|
||||
context:
|
||||
endif
|
||||
|
||||
-include Make.dep
|
||||
|
|
@ -0,0 +1,4 @@
|
|||
/*
|
||||
* There are no source files here, but libboard.a can't be empty, so
|
||||
* we have this empty source file to keep it company.
|
||||
*/
|
||||
|
|
@ -0,0 +1,50 @@
|
|||
############################################################################
|
||||
#
|
||||
# Copyright (c) 2015 PX4 Development Team. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name PX4 nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
px4_add_module(
|
||||
MODULE drivers__boards__aerocore2
|
||||
COMPILE_FLAGS
|
||||
SRCS
|
||||
../common/board_dma_alloc.c
|
||||
../common/stm32/board_reset.c
|
||||
../common/stm32/board_identity.c
|
||||
../common/stm32/board_mcu_version.c
|
||||
aerocore2_can.c
|
||||
aerocore2_init.c
|
||||
aerocore2_timer_config.c
|
||||
aerocore2_spi.c
|
||||
aerocore2_usb.c
|
||||
aerocore2_led.c
|
||||
DEPENDS
|
||||
platforms__common
|
||||
)
|
||||
# vim: set noet ft=cmake fenc=utf-8 ff=unix :
|
||||
|
|
@ -0,0 +1,145 @@
|
|||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file aerocore2_can.c
|
||||
*
|
||||
* Board-specific CAN functions.
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/drivers/can.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
|
||||
#include "stm32.h"
|
||||
#include "stm32_can.h"
|
||||
#include "board_config.h"
|
||||
|
||||
#ifdef CONFIG_CAN
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
/* Configuration ********************************************************************/
|
||||
|
||||
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
|
||||
# warning "Both CAN1 and CAN2 are enabled. Assuming only CAN1."
|
||||
# undef CONFIG_STM32_CAN2
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_CAN1
|
||||
# define CAN_PORT 1
|
||||
#else
|
||||
# define CAN_PORT 2
|
||||
#endif
|
||||
|
||||
/* Debug ***************************************************************************/
|
||||
/* Non-standard debug that may be enabled just for testing CAN */
|
||||
|
||||
#ifdef CONFIG_DEBUG_CAN
|
||||
# define candbg dbg
|
||||
# define canvdbg vdbg
|
||||
# define canlldbg lldbg
|
||||
# define canllvdbg llvdbg
|
||||
#else
|
||||
# define candbg(x...)
|
||||
# define canvdbg(x...)
|
||||
# define canlldbg(x...)
|
||||
# define canllvdbg(x...)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
int can_devinit(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: can_devinit
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following interface to work with
|
||||
* examples/can.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
int can_devinit(void)
|
||||
{
|
||||
static bool initialized = false;
|
||||
struct can_dev_s *can;
|
||||
int ret;
|
||||
|
||||
/* Check if we have already initialized */
|
||||
|
||||
if (!initialized) {
|
||||
/* Call stm32_caninitialize() to get an instance of the CAN interface */
|
||||
|
||||
can = stm32_caninitialize(CAN_PORT);
|
||||
|
||||
if (can == NULL) {
|
||||
candbg("ERROR: Failed to get CAN interface\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Register the CAN driver at "/dev/can0" */
|
||||
|
||||
ret = can_register("/dev/can0", can);
|
||||
|
||||
if (ret < 0) {
|
||||
candbg("ERROR: can_register failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Now we are initialized */
|
||||
|
||||
initialized = true;
|
||||
}
|
||||
|
||||
return OK;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,293 @@
|
|||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file aerocore2_init.c
|
||||
*
|
||||
* AeroCore2-specific early startup code. This file implements the
|
||||
* nsh_archinitialize() function that is called early by nsh during startup.
|
||||
*
|
||||
* Code here is run before the rcS script is invoked; it should start required
|
||||
* subsystems and perform board-specific initialisation.
|
||||
*/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
#include <px4_tasks.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdio.h>
|
||||
#include <debug.h>
|
||||
#include <errno.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/board.h>
|
||||
#include <nuttx/spi/spi.h>
|
||||
#include <nuttx/i2c/i2c_master.h>
|
||||
#include <nuttx/analog/adc.h>
|
||||
|
||||
#include <stm32.h>
|
||||
#include "board_config.h"
|
||||
#include <stm32_uart.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <drivers/drv_hrt.h>
|
||||
#include <drivers/drv_board_led.h>
|
||||
|
||||
#include <systemlib/cpuload.h>
|
||||
#include <systemlib/perf_counter.h>
|
||||
#include <systemlib/err.h>
|
||||
|
||||
#include <systemlib/param/param.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
/* Debug ********************************************************************/
|
||||
|
||||
#ifdef CONFIG_CPP_HAVE_VARARGS
|
||||
# ifdef CONFIG_DEBUG
|
||||
# define message(...) lowsyslog(__VA_ARGS__)
|
||||
# else
|
||||
# define message(...) printf(__VA_ARGS__)
|
||||
# endif
|
||||
#else
|
||||
# ifdef CONFIG_DEBUG
|
||||
# define message lowsyslog
|
||||
# else
|
||||
# define message printf
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Ideally we'd be able to get these from up_internal.h,
|
||||
* but since we want to be able to disable the NuttX use
|
||||
* of leds for system indication at will and there is no
|
||||
* separate switch, we need to build independent of the
|
||||
* CONFIG_ARCH_LEDS configuration switch.
|
||||
*/
|
||||
__BEGIN_DECLS
|
||||
extern void led_init(void);
|
||||
extern void led_on(int led);
|
||||
extern void led_off(int led);
|
||||
__END_DECLS
|
||||
|
||||
/****************************************************************************
|
||||
* Protected Functions
|
||||
****************************************************************************/
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: board_peripheral_reset
|
||||
*
|
||||
* Description:
|
||||
*
|
||||
************************************************************************************/
|
||||
__EXPORT void board_peripheral_reset(int ms)
|
||||
{
|
||||
bool last = stm32_gpioread(GPIO_SPEKTRUM_PWR_EN);
|
||||
/* Keep Spektum on to discharge rail*/
|
||||
stm32_gpiowrite(GPIO_SPEKTRUM_PWR_EN, 1);
|
||||
|
||||
/* wait for the peripheral rail to reach GND */
|
||||
usleep(ms * 1000);
|
||||
warnx("reset done, %d ms", ms);
|
||||
|
||||
/* re-enable power */
|
||||
/* switch the peripheral rail back on */
|
||||
stm32_gpiowrite(GPIO_SPEKTRUM_PWR_EN, last);
|
||||
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All STM32 architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void
|
||||
stm32_boardinitialize(void)
|
||||
{
|
||||
/* configure ADC pins */
|
||||
|
||||
stm32_configgpio(GPIO_ADC1_IN10); /* used by battery sense */
|
||||
stm32_configgpio(GPIO_ADC1_IN11); /* J1 breakout */
|
||||
stm32_configgpio(GPIO_ADC1_IN12); /* J1 breakout */
|
||||
stm32_configgpio(GPIO_ADC1_IN13); /* J1 breakout */
|
||||
|
||||
/* configure the power mux sense input */
|
||||
stm32_configgpio(GPIO_POWER_MUX_SENSE);
|
||||
|
||||
/* configure spektrum power controller gpio */
|
||||
stm32_configgpio(GPIO_SPEKTRUM_PWR_EN);
|
||||
|
||||
/* configure SPI interfaces */
|
||||
stm32_spiinitialize();
|
||||
|
||||
/* configure LEDs */
|
||||
board_autoled_initialize();
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_app_initialize
|
||||
*
|
||||
* Description:
|
||||
* Perform application specific initialization. This function is never
|
||||
* called directly from application code, but only indirectly via the
|
||||
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
|
||||
*
|
||||
* Input Parameters:
|
||||
* arg - The boardctl() argument is passed to the board_app_initialize()
|
||||
* implementation without modification. The argument has no
|
||||
* meaning to NuttX; the meaning of the argument is a contract
|
||||
* between the board-specific initalization logic and the the
|
||||
* matching application logic. The value cold be such things as a
|
||||
* mode enumeration value, a set of DIP switch switch settings, a
|
||||
* pointer to configuration data read from a file or serial FLASH,
|
||||
* or whatever you would like to do with it. Every implementation
|
||||
* should accept zero/NULL as a default configuration.
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) is returned on success; a negated errno value is returned on
|
||||
* any failure to indicate the nature of the failure.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static struct spi_dev_s *spi3;
|
||||
static struct spi_dev_s *spi4;
|
||||
|
||||
__EXPORT int board_app_initialize(uintptr_t arg)
|
||||
{
|
||||
#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
|
||||
|
||||
/* run C++ ctors before we go any further */
|
||||
|
||||
up_cxxinitialize();
|
||||
|
||||
# if defined(CONFIG_EXAMPLES_NSH_CXXINITIALIZE)
|
||||
# error CONFIG_EXAMPLES_NSH_CXXINITIALIZE Must not be defined! Use CONFIG_HAVE_CXX and CONFIG_HAVE_CXXINITIALIZE.
|
||||
# endif
|
||||
|
||||
#else
|
||||
# error platform is dependent on c++ both CONFIG_HAVE_CXX and CONFIG_HAVE_CXXINITIALIZE must be defined.
|
||||
#endif
|
||||
|
||||
/* configure the high-resolution time/callout interface */
|
||||
hrt_init();
|
||||
|
||||
param_init();
|
||||
|
||||
/* configure the DMA allocator */
|
||||
|
||||
if (board_dma_alloc_init() < 0) {
|
||||
message("DMA alloc FAILED");
|
||||
}
|
||||
|
||||
/* configure CPU load estimation */
|
||||
#ifdef CONFIG_SCHED_INSTRUMENTATION
|
||||
cpuload_initialize_once();
|
||||
#endif
|
||||
|
||||
/* set up the serial DMA polling */
|
||||
static struct hrt_call serial_dma_call;
|
||||
struct timespec ts;
|
||||
|
||||
/*
|
||||
* Poll at 1ms intervals for received bytes that have not triggered
|
||||
* a DMA event.
|
||||
*/
|
||||
ts.tv_sec = 0;
|
||||
ts.tv_nsec = 1000000;
|
||||
|
||||
hrt_call_every(&serial_dma_call,
|
||||
ts_to_abstime(&ts),
|
||||
ts_to_abstime(&ts),
|
||||
(hrt_callout)stm32_serial_dma_poll,
|
||||
NULL);
|
||||
|
||||
/* initial LED state */
|
||||
drv_led_start();
|
||||
led_off(LED_AMBER);
|
||||
|
||||
/* Configure SPI-based devices */
|
||||
|
||||
spi3 = px4_spibus_initialize(3);
|
||||
|
||||
if (!spi3) {
|
||||
message("[boot] FAILED to initialize SPI port 3\n");
|
||||
board_autoled_on(LED_AMBER);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Default SPI3 to 1MHz and de-assert the known chip selects. */
|
||||
SPI_SETFREQUENCY(spi3, 10000000);
|
||||
SPI_SETBITS(spi3, 8);
|
||||
SPI_SETMODE(spi3, SPIDEV_MODE3);
|
||||
SPI_SELECT(spi3, PX4_SPIDEV_GYRO, false);
|
||||
SPI_SELECT(spi3, PX4_SPIDEV_ACCEL_MAG, false);
|
||||
SPI_SELECT(spi3, PX4_SPIDEV_BARO, false);
|
||||
up_udelay(20);
|
||||
|
||||
/* Get the SPI port for the FRAM */
|
||||
|
||||
spi4 = px4_spibus_initialize(4);
|
||||
|
||||
if (!spi4) {
|
||||
message("[boot] FAILED to initialize SPI port 4\n");
|
||||
board_autoled_on(LED_AMBER);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* Default SPI4 to 37.5 MHz (40 MHz rounded to nearest valid divider, F4 max)
|
||||
* and de-assert the known chip selects. */
|
||||
|
||||
// XXX start with 10.4 MHz in FRAM usage and go up to 37.5 once validated
|
||||
SPI_SETFREQUENCY(spi4, 12 * 1000 * 1000);
|
||||
SPI_SETBITS(spi4, 8);
|
||||
SPI_SETMODE(spi4, SPIDEV_MODE3);
|
||||
SPI_SELECT(spi4, SPIDEV_FLASH, false);
|
||||
|
||||
return OK;
|
||||
}
|
||||
|
|
@ -0,0 +1,106 @@
|
|||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2013 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file aerocore2_led.c
|
||||
*
|
||||
* AEROCORE2 LED backend.
|
||||
*/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
#include "stm32.h"
|
||||
#include "board_config.h"
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
/*
|
||||
* Ideally we'd be able to get these from up_internal.h,
|
||||
* but since we want to be able to disable the NuttX use
|
||||
* of leds for system indication at will and there is no
|
||||
* separate switch, we need to build independent of the
|
||||
* CONFIG_ARCH_LEDS configuration switch.
|
||||
*/
|
||||
__BEGIN_DECLS
|
||||
extern void led_init(void);
|
||||
extern void led_on(int led);
|
||||
extern void led_off(int led);
|
||||
extern void led_toggle(int led);
|
||||
__END_DECLS
|
||||
|
||||
|
||||
|
||||
static uint32_t g_ledmap[] = {
|
||||
GPIO_LED_BLUE, // Indexed by LED_BLUE
|
||||
GPIO_LED_RED, // Indexed by LED_RED, LED_AMBER
|
||||
GPIO_LED_SAFETY, // Indexed by LED_SAFETY
|
||||
GPIO_LED_GREEN, // Indexed by LED_GREEN
|
||||
};
|
||||
|
||||
__EXPORT void led_init(void)
|
||||
{
|
||||
/* Configure LED GPIOs for output */
|
||||
for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
|
||||
stm32_configgpio(g_ledmap[l]);
|
||||
}
|
||||
}
|
||||
|
||||
static void phy_set_led(int led, bool state)
|
||||
{
|
||||
/* Pull up to switch on */
|
||||
stm32_gpiowrite(g_ledmap[led], state);
|
||||
}
|
||||
|
||||
static bool phy_get_led(int led)
|
||||
{
|
||||
|
||||
return stm32_gpioread(g_ledmap[led]);
|
||||
}
|
||||
|
||||
__EXPORT void led_on(int led)
|
||||
{
|
||||
phy_set_led(led, true);
|
||||
}
|
||||
|
||||
__EXPORT void led_off(int led)
|
||||
{
|
||||
phy_set_led(led, false);
|
||||
}
|
||||
|
||||
__EXPORT void led_toggle(int led)
|
||||
{
|
||||
|
||||
phy_set_led(led, !phy_get_led(led));
|
||||
}
|
||||
|
|
@ -0,0 +1,230 @@
|
|||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file aerocore2_spi.c
|
||||
*
|
||||
* Board-specific SPI functions.
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
#include <unistd.h>
|
||||
#include <nuttx/spi/spi.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include <up_arch.h>
|
||||
#include <chip.h>
|
||||
#include <stm32.h>
|
||||
#include "board_config.h"
|
||||
#include <systemlib/err.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_spiinitialize(void)
|
||||
{
|
||||
#ifdef CONFIG_STM32_SPI3
|
||||
px4_arch_configgpio(GPIO_SPI_CS_GYRO);
|
||||
px4_arch_configgpio(GPIO_SPI_CS_ACCEL_MAG);
|
||||
px4_arch_configgpio(GPIO_SPI_CS_BARO);
|
||||
|
||||
/* De-activate all peripherals,
|
||||
* required for some peripheral
|
||||
* state machines
|
||||
*/
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_GYRO, 1);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_BARO, 1);
|
||||
|
||||
px4_arch_configgpio(GPIO_EXTI_GYRO_DRDY);
|
||||
px4_arch_configgpio(GPIO_EXTI_MAG_DRDY);
|
||||
px4_arch_configgpio(GPIO_EXTI_ACCEL_DRDY);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI4
|
||||
px4_arch_configgpio(GPIO_SPI_CS_FRAM);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_FRAM, 1);
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
#ifdef CONFIG_STM32_SPI1
|
||||
__EXPORT void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
/* there is only one device broken-out so select it */
|
||||
px4_arch_gpiowrite(GPIO_SPI1_NSS, !selected);
|
||||
}
|
||||
|
||||
__EXPORT uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI2
|
||||
__EXPORT void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
/* there is only one device broken-out so select it */
|
||||
px4_arch_gpiowrite(GPIO_SPI2_NSS, !selected);
|
||||
}
|
||||
|
||||
__EXPORT uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_STM32_SPI3
|
||||
__EXPORT void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
/* SPI select is active low, so write !selected to select the device */
|
||||
|
||||
switch (devid) {
|
||||
case PX4_SPIDEV_GYRO:
|
||||
/* Making sure the other peripherals are not selected */
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_GYRO, !selected);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_BARO, 1);
|
||||
break;
|
||||
|
||||
case PX4_SPIDEV_ACCEL_MAG:
|
||||
/* Making sure the other peripherals are not selected */
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_GYRO, 1);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, !selected);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_BARO, 1);
|
||||
break;
|
||||
|
||||
case PX4_SPIDEV_BARO:
|
||||
/* Making sure the other peripherals are not selected */
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_GYRO, 1);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_BARO, !selected);
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
__EXPORT uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
|
||||
|
||||
#ifdef CONFIG_STM32_SPI4
|
||||
__EXPORT void stm32_spi4select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
/* there can only be one device on this bus, so always select it */
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_FRAM, !selected);
|
||||
}
|
||||
|
||||
__EXPORT uint8_t stm32_spi4status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
/* FRAM is always present */
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
__EXPORT void board_spi_reset(int ms)
|
||||
{
|
||||
/* disable SPI bus */
|
||||
px4_arch_configgpio(GPIO_SPI_CS_GYRO_OFF);
|
||||
px4_arch_configgpio(GPIO_SPI_CS_ACCEL_MAG_OFF);
|
||||
px4_arch_configgpio(GPIO_SPI_CS_BARO_OFF);
|
||||
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_GYRO_OFF, 0);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_ACCEL_MAG_OFF, 0);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_BARO_OFF, 0);
|
||||
|
||||
px4_arch_configgpio(GPIO_SPI3_SCK_OFF);
|
||||
px4_arch_configgpio(GPIO_SPI3_MISO_OFF);
|
||||
px4_arch_configgpio(GPIO_SPI3_MOSI_OFF);
|
||||
|
||||
px4_arch_gpiowrite(GPIO_SPI3_SCK_OFF, 0);
|
||||
px4_arch_gpiowrite(GPIO_SPI3_MISO_OFF, 0);
|
||||
px4_arch_gpiowrite(GPIO_SPI3_MOSI_OFF, 0);
|
||||
|
||||
px4_arch_configgpio(GPIO_GYRO_DRDY_OFF);
|
||||
px4_arch_configgpio(GPIO_MAG_DRDY_OFF);
|
||||
px4_arch_configgpio(GPIO_ACCEL_DRDY_OFF);
|
||||
|
||||
px4_arch_gpiowrite(GPIO_GYRO_DRDY_OFF, 0);
|
||||
px4_arch_gpiowrite(GPIO_MAG_DRDY_OFF, 0);
|
||||
px4_arch_gpiowrite(GPIO_ACCEL_DRDY_OFF, 0);
|
||||
|
||||
/* wait for the sensor rail to reach GND */
|
||||
usleep(ms * 1000);
|
||||
warnx("reset done, %d ms", ms);
|
||||
|
||||
/* wait a bit before starting SPI, different times didn't influence results */
|
||||
usleep(100);
|
||||
|
||||
/* reconfigure the SPI pins */
|
||||
#ifdef CONFIG_STM32_SPI3
|
||||
px4_arch_configgpio(GPIO_SPI_CS_GYRO);
|
||||
px4_arch_configgpio(GPIO_SPI_CS_ACCEL_MAG);
|
||||
px4_arch_configgpio(GPIO_SPI_CS_BARO);
|
||||
|
||||
/* De-activate all peripherals,
|
||||
* required for some peripheral
|
||||
* state machines
|
||||
*/
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_GYRO, 1);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_ACCEL_MAG, 1);
|
||||
px4_arch_gpiowrite(GPIO_SPI_CS_BARO, 1);
|
||||
|
||||
px4_arch_configgpio(GPIO_SPI3_SCK);
|
||||
px4_arch_configgpio(GPIO_SPI3_MISO);
|
||||
px4_arch_configgpio(GPIO_SPI3_MOSI);
|
||||
|
||||
#endif
|
||||
}
|
||||
|
|
@ -0,0 +1,142 @@
|
|||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* @file aercore2_timer_config.c
|
||||
*
|
||||
* Configuration data for the stm32 pwm_servo, input capture and pwm input driver.
|
||||
*
|
||||
* Note that these arrays must always be fully-sized.
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#include <stm32.h>
|
||||
#include <stm32_gpio.h>
|
||||
#include <stm32_tim.h>
|
||||
|
||||
#include <drivers/drv_pwm_output.h>
|
||||
#include <drivers/stm32/drv_io_timer.h>
|
||||
|
||||
#include "board_config.h"
|
||||
|
||||
__EXPORT const io_timers_t io_timers[MAX_IO_TIMERS] = {
|
||||
{
|
||||
.base = STM32_TIM4_BASE,
|
||||
.clock_register = STM32_RCC_APB1ENR,
|
||||
.clock_bit = RCC_APB1ENR_TIM4EN,
|
||||
.clock_freq = STM32_APB1_TIM4_CLKIN,
|
||||
.first_channel_index = 0,
|
||||
.last_channel_index = 3,
|
||||
.handler = io_timer_handler0,
|
||||
.vectorno = STM32_IRQ_TIM4,
|
||||
|
||||
},
|
||||
{
|
||||
.base = STM32_TIM5_BASE,
|
||||
.clock_register = STM32_RCC_APB1ENR,
|
||||
.clock_bit = RCC_APB1ENR_TIM5EN,
|
||||
.clock_freq = STM32_APB1_TIM5_CLKIN,
|
||||
.first_channel_index = 4,
|
||||
.last_channel_index = 7,
|
||||
.handler = io_timer_handler1,
|
||||
.vectorno = STM32_IRQ_TIM5
|
||||
}
|
||||
};
|
||||
|
||||
__EXPORT const timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
|
||||
{
|
||||
.gpio_out = GPIO_TIM4_CH1OUT,
|
||||
.gpio_in = GPIO_TIM9_CH1IN,
|
||||
.timer_index = 0,
|
||||
.timer_channel = 1,
|
||||
.ccr_offset = STM32_GTIM_CCR1_OFFSET,
|
||||
.masks = GTIM_SR_CC1IF | GTIM_SR_CC1OF
|
||||
},
|
||||
{
|
||||
.gpio_out = GPIO_TIM4_CH2OUT,
|
||||
.gpio_in = GPIO_TIM9_CH2IN,
|
||||
.timer_index = 0,
|
||||
.timer_channel = 2,
|
||||
.ccr_offset = STM32_GTIM_CCR2_OFFSET,
|
||||
.masks = GTIM_SR_CC2IF | GTIM_SR_CC2OF
|
||||
},
|
||||
{
|
||||
.gpio_out = GPIO_TIM4_CH3OUT,
|
||||
.gpio_in = GPIO_TIM3_CH1IN,
|
||||
.timer_index = 0,
|
||||
.timer_channel = 3,
|
||||
.ccr_offset = STM32_GTIM_CCR3_OFFSET,
|
||||
.masks = GTIM_SR_CC3IF | GTIM_SR_CC3OF
|
||||
},
|
||||
{
|
||||
.gpio_out = GPIO_TIM4_CH4OUT,
|
||||
.gpio_in = GPIO_TIM3_CH2IN,
|
||||
.timer_index = 0,
|
||||
.timer_channel = 4,
|
||||
.ccr_offset = STM32_GTIM_CCR4_OFFSET,
|
||||
.masks = GTIM_SR_CC4IF | GTIM_SR_CC4OF
|
||||
},
|
||||
{
|
||||
.gpio_out = GPIO_TIM5_CH1OUT,
|
||||
.gpio_in = GPIO_TIM3_CH3IN,
|
||||
.timer_index = 1,
|
||||
.timer_channel = 1,
|
||||
.ccr_offset = STM32_GTIM_CCR1_OFFSET,
|
||||
.masks = GTIM_SR_CC1IF | GTIM_SR_CC1OF
|
||||
},
|
||||
{
|
||||
.gpio_out = GPIO_TIM5_CH2OUT,
|
||||
.gpio_in = GPIO_TIM1_CH1IN,
|
||||
.timer_index = 1,
|
||||
.timer_channel = 2,
|
||||
.ccr_offset = STM32_GTIM_CCR2_OFFSET,
|
||||
.masks = GTIM_SR_CC2IF | GTIM_SR_CC2OF
|
||||
},
|
||||
{
|
||||
.gpio_out = GPIO_TIM5_CH3OUT,
|
||||
.gpio_in = GPIO_TIM1_CH2IN,
|
||||
.timer_index = 1,
|
||||
.timer_channel = 3,
|
||||
.ccr_offset = STM32_GTIM_CCR3_OFFSET,
|
||||
.masks = GTIM_SR_CC3IF | GTIM_SR_CC3OF
|
||||
},
|
||||
{
|
||||
.gpio_out = GPIO_TIM5_CH4OUT,
|
||||
.gpio_in = GPIO_TIM1_CH3IN,
|
||||
.timer_index = 1,
|
||||
.timer_channel = 4,
|
||||
.ccr_offset = STM32_GTIM_CCR4_OFFSET,
|
||||
.masks = GTIM_SR_CC4IF | GTIM_SR_CC4OF
|
||||
}
|
||||
};
|
||||
|
|
@ -0,0 +1,108 @@
|
|||
/****************************************************************************
|
||||
*
|
||||
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file aerocore2_usb.c
|
||||
*
|
||||
* Board-specific USB functions.
|
||||
*/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/usb/usbdev.h>
|
||||
#include <nuttx/usb/usbdev_trace.h>
|
||||
|
||||
#include <up_arch.h>
|
||||
#include <stm32.h>
|
||||
#include "board_config.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_usbinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to setup USB-related GPIO pins for the PX4FMU board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_usbinitialize(void)
|
||||
{
|
||||
/* The OTG FS has an internal soft pull-up */
|
||||
|
||||
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
|
||||
|
||||
#ifdef CONFIG_STM32_OTGFS
|
||||
px4_arch_configgpio(GPIO_OTGFS_VBUS);
|
||||
/* XXX We only support device mode
|
||||
px4_arch_configgpio(GPIO_OTGFS_PWRON);
|
||||
px4_arch_configgpio(GPIO_OTGFS_OVER);
|
||||
*/
|
||||
#endif
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_usbsuspend
|
||||
*
|
||||
* Description:
|
||||
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
|
||||
* used. This function is called whenever the USB enters or leaves suspend mode.
|
||||
* This is an opportunity for the board logic to shutdown clocks, power, etc.
|
||||
* while the USB is suspended.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
|
||||
{
|
||||
//ulldbg("resume: %d\n", resume);
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,261 @@
|
|||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2013-2016 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file board_config.h
|
||||
*
|
||||
* AeroCore2 internal definitions
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/****************************************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************************************/
|
||||
|
||||
#include <px4_config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
#include <stdint.h>
|
||||
|
||||
/****************************************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************************************/
|
||||
|
||||
/* LEDs */
|
||||
#define GPIO_LED0 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN9)
|
||||
#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN10)
|
||||
|
||||
#define GPIO_LED_RED GPIO_LED1
|
||||
#define GPIO_LED_GREEN GPIO_LED0
|
||||
#define GPIO_LED_BLUE 0
|
||||
#define GPIO_LED_SAFETY 0
|
||||
|
||||
/* GPS */
|
||||
#define GPS_DEFAULT_UART_PORT "/dev/ttyS0"
|
||||
|
||||
/* Power muxes */
|
||||
/* LOW=battery HIGH=USB */
|
||||
#define GPIO_POWER_MUX_SENSE (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN5)
|
||||
|
||||
/* External interrupts */
|
||||
#define GPIO_EXTI_GYRO_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN2)
|
||||
#define GPIO_EXTI_MAG_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN4)
|
||||
#define GPIO_EXTI_ACCEL_DRDY (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN3)
|
||||
|
||||
/* Data ready pins off */
|
||||
#define GPIO_GYRO_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTD|GPIO_PIN2)
|
||||
#define GPIO_MAG_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTD|GPIO_PIN4)
|
||||
#define GPIO_ACCEL_DRDY_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTD|GPIO_PIN3)
|
||||
|
||||
/* SPI3 off */
|
||||
#define GPIO_SPI3_SCK_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTC|GPIO_PIN10)
|
||||
#define GPIO_SPI3_MISO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTC|GPIO_PIN11)
|
||||
#define GPIO_SPI3_MOSI_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTC|GPIO_PIN12)
|
||||
|
||||
/* SPI3 chip selects off */
|
||||
#define GPIO_SPI_CS_GYRO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTE|GPIO_PIN3)
|
||||
#define GPIO_SPI_CS_ACCEL_MAG_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTE|GPIO_PIN2)
|
||||
#define GPIO_SPI_CS_BARO_OFF (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_2MHz|GPIO_PORTE|GPIO_PIN4)
|
||||
|
||||
/* SPI chip selects */
|
||||
#define GPIO_SPI_CS_GYRO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
|
||||
#define GPIO_SPI_CS_ACCEL_MAG (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN2)
|
||||
#define GPIO_SPI_CS_BARO (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
|
||||
#define GPIO_SPI_CS_FRAM (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN11)
|
||||
|
||||
#define PX4_SPI_BUS_SENSORS 3
|
||||
#define PX4_SPI_BUS_RAMTRON 4
|
||||
#define PX4_SPI_BUS_EXT 1
|
||||
#define PX4_SPI_BUS_BARO PX4_SPI_BUS_SENSORS
|
||||
|
||||
/* Use these in place of the spi_dev_e enumeration to select a specific SPI device on SPI3 */
|
||||
#define PX4_SPIDEV_GYRO 1
|
||||
#define PX4_SPIDEV_ACCEL_MAG 2
|
||||
#define PX4_SPIDEV_BARO 3
|
||||
|
||||
/* I2C busses */
|
||||
#define PX4_I2C_BUS_EXPANSION 1
|
||||
#define PX4_I2C_BUS_ONBOARD 2
|
||||
|
||||
/*
|
||||
* ADC channels
|
||||
*
|
||||
* These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc driver
|
||||
*/
|
||||
#define ADC_CHANNELS (1 << 10) | (1 << 11) | (1 << 12) | (1 << 13)
|
||||
|
||||
/*
|
||||
* ADC defines to be used in sensors.cpp to read from a particular channel
|
||||
*/
|
||||
#define ADC_BATTERY_VOLTAGE_CHANNEL 10
|
||||
#define ADC_BATTERY_CURRENT_CHANNEL 0
|
||||
|
||||
/* Define Battery 1 Voltage Divider
|
||||
*/
|
||||
|
||||
#define BOARD_BATTERY1_V_DIV (11.0f)
|
||||
|
||||
/* Tone alarm output */
|
||||
#define TONE_ALARM_TIMER 10 /* timer 10 */
|
||||
#define TONE_ALARM_CHANNEL 1 /* channel 1 */
|
||||
#define GPIO_TONE_ALARM_IDLE (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8)
|
||||
#define GPIO_TONE_ALARM (GPIO_ALT|GPIO_AF3|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTB|GPIO_PIN8)
|
||||
|
||||
/* PWM
|
||||
*
|
||||
* Eight PWM outputs are configured.
|
||||
*
|
||||
* Pins:
|
||||
*
|
||||
* CH1 : PD12 : TIM4_CH1
|
||||
* CH2 : PD13 : TIM4_CH2
|
||||
* CH3 : PD14 : TIM4_CH3
|
||||
* CH4 : PD15 : TIM4_CH4
|
||||
* CH5 : PA0 : TIM5_CH1
|
||||
* CH6 : PA1 : TIM5_CH2
|
||||
* CH7 : PA2 : TIM5_CH3
|
||||
* CH8 : PA3 : TIM5_CH4
|
||||
*/
|
||||
#define GPIO_TIM4_CH1OUT GPIO_TIM4_CH1OUT_2
|
||||
#define GPIO_TIM4_CH2OUT GPIO_TIM4_CH2OUT_2
|
||||
#define GPIO_TIM4_CH3OUT GPIO_TIM4_CH3OUT_2
|
||||
#define GPIO_TIM4_CH4OUT GPIO_TIM4_CH4OUT_2
|
||||
#define GPIO_TIM5_CH1OUT GPIO_TIM5_CH1OUT_1
|
||||
#define GPIO_TIM5_CH2OUT GPIO_TIM5_CH2OUT_1
|
||||
#define GPIO_TIM5_CH3OUT GPIO_TIM5_CH3OUT_1
|
||||
#define GPIO_TIM5_CH4OUT GPIO_TIM5_CH4OUT_1
|
||||
#define DIRECT_PWM_OUTPUT_CHANNELS 8
|
||||
|
||||
/* PWM
|
||||
*
|
||||
* Eight PWM inputs are configured.
|
||||
*
|
||||
* Pins:
|
||||
*
|
||||
* CH8 : PE5 : TIM9_CH1
|
||||
* CH7 : PE6 : TIM9_CH2
|
||||
* CH6 : PC6 : TIM3_CH1
|
||||
* CH5 : PC7 : TIM3_CH2
|
||||
* CH4 : PC8 : TIM3_CH3
|
||||
* CH3 : PA8 : TIM1_CH1
|
||||
* CH2 : PA9 : TIM1_CH2
|
||||
* CH1 : PA10 : TIM1_CH3
|
||||
*/
|
||||
#define GPIO_TIM9_CH1IN GPIO_TIM9_CH1IN_2
|
||||
#define GPIO_TIM9_CH2IN GPIO_TIM9_CH2IN_2
|
||||
#define GPIO_TIM3_CH1IN GPIO_TIM3_CH1IN_3
|
||||
#define GPIO_TIM3_CH2IN GPIO_TIM3_CH2IN_3
|
||||
#define GPIO_TIM3_CH3IN GPIO_TIM3_CH3IN_2
|
||||
#define GPIO_TIM1_CH1IN GPIO_TIM1_CH1IN_1
|
||||
#define GPIO_TIM1_CH2IN GPIO_TIM1_CH2IN_1
|
||||
#define GPIO_TIM1_CH3IN GPIO_TIM1_CH3IN_1
|
||||
#define DIRECT_INPUT_TIMER_CHANNELS 8
|
||||
|
||||
/* spektrum satellite receiver input */
|
||||
#define GPIO_SPEKTRUM_PWR_EN (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN15)
|
||||
#define SPEKTRUM_POWER(_on_true) px4_arch_gpiowrite(GPIO_SPEKTRUM_PWR_EN, (_on_true))
|
||||
#define RC_SERIAL_PORT "/dev/ttyS4"
|
||||
#define INVERT_RC_INPUT(_s) while(0)
|
||||
#define GPIO_PPM_IN 0
|
||||
#define GPIO_RC_OUT 0
|
||||
#define SPEKTRUM_RX_AS_GPIO_OUTPUT() px4_arch_configgpio(GPIO_RC_OUT)
|
||||
#define SPEKTRUM_OUT(_one_true) px4_arch_gpiowrite(GPIO_RC_OUT, (_one_true))
|
||||
#define SPEKTRUM_RX_AS_UART() /* Can be left as uart */
|
||||
|
||||
/* USB OTG FS
|
||||
*
|
||||
* PA9 OTG_FS_VBUS VBUS sensing
|
||||
*/
|
||||
#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
|
||||
|
||||
/* High-resolution timer */
|
||||
#define HRT_TIMER 8 /* use timer8 for the HRT */
|
||||
#define HRT_TIMER_CHANNEL 1 /* use capture/compare channel */
|
||||
|
||||
#define BOARD_NAME "AEROCORE2"
|
||||
|
||||
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
|
||||
|
||||
#define BOARD_FMU_GPIO_TAB { \
|
||||
{0, 0, 0}, }
|
||||
|
||||
/* This board provides a DMA pool and APIs */
|
||||
#define BOARD_DMA_ALLOC_POOL_SIZE 5120
|
||||
|
||||
/* The board isn't extremely constrained but
|
||||
* src/modules/navigator/navigation.h defines
|
||||
* NUM_MISSIONS_SUPPORTED to be UINT16_MAX - 1
|
||||
* which is too large for the AeroCore2's FRAM
|
||||
* so we define MEMORY_CONSTRAINED_SYSTEM so that
|
||||
* NUM_MISSIONS_SUPPORTED is only 50
|
||||
*/
|
||||
#define MEMORY_CONSTRAINED_SYSTEM
|
||||
|
||||
/* Dataman uses the mtd to save data
|
||||
*/
|
||||
#define BOARD_HAS_MTD_PARTITION_OVERRIDE {"/fs/mtd_params", "/fs/mtd_dataman"}
|
||||
|
||||
__BEGIN_DECLS
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************************************/
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public data
|
||||
****************************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************************************/
|
||||
|
||||
/****************************************************************************************************
|
||||
* Name: stm32_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the PX4FMU board.
|
||||
*
|
||||
****************************************************************************************************/
|
||||
|
||||
extern void stm32_spiinitialize(void);
|
||||
extern void board_spi_reset(int ms);
|
||||
extern void stm32_usbinitialize(void);
|
||||
extern void board_peripheral_reset(int ms);
|
||||
|
||||
#include "../common/board_common.h"
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
__END_DECLS
|
||||
|
|
@ -3328,7 +3328,7 @@ control_status_leds(vehicle_status_s *status_local, const actuator_armed_s *actu
|
|||
|
||||
last_overload = overload;
|
||||
|
||||
#if defined (CONFIG_ARCH_BOARD_PX4FMU_V1) || defined (CONFIG_ARCH_BOARD_PX4FMU_V4) || defined (CONFIG_ARCH_BOARD_CRAZYFLIE) || defined (CONFIG_ARCH_BOARD_AEROFC_V1)
|
||||
#if defined (CONFIG_ARCH_BOARD_PX4FMU_V1) || defined (CONFIG_ARCH_BOARD_PX4FMU_V4) || defined (CONFIG_ARCH_BOARD_CRAZYFLIE) || defined (CONFIG_ARCH_BOARD_AEROFC_V1) || defined (CONFIG_ARCH_BOARD_AEROCORE2)
|
||||
|
||||
/* this runs at around 20Hz, full cycle is 16 ticks = 10/16Hz */
|
||||
if (actuator_armed->armed) {
|
||||
|
|
|
|||
Loading…
Reference in New Issue