9b81e46e61
AP_Common: add example sketch
2014-06-17 20:53:53 +10:00
b79f729540
AP_Common: add LOWBYTE, HIGHBYTE macros
2014-06-17 20:53:47 +10:00
fa16e0967f
AP_Common: remove unused location mask definitions
2014-06-17 20:53:45 +10:00
42c1501563
AP_Common: moved map_baudrate() into AP_Common
...
this version supports a much wider range of baudrates
2014-05-21 12:45:25 +10:00
e3ffd5c0dd
Common: remove RallyLocation defintion
2014-04-19 15:00:28 +09:00
7b5c002d2f
AP_Common: new board ID for VRBRAIN
2014-04-08 16:19:19 +10:00
959cafef8d
AP_Common: make alt in Location 24 bit
...
this allows for up to 83km mission altitudes, while allowing for 1
more byte in the command structure, making p1 16 bits
2014-03-20 16:57:09 +11:00
865a4de33d
Common: use PACKED instead of pragma pack for Location
2014-03-19 12:12:49 +09:00
af186fba05
AP_Common: pack Location structure
...
This resolves issues storing and retrieving Location to eeprom as part
of AP_Mission
2014-03-19 12:11:13 +09:00
87126c9b71
Common: remove id and p1 from Location structure
...
id and p1 are now part of AP_Mission's Mission_Command structure
2014-03-19 12:10:46 +09:00
9ef27955b5
Common: add location options masks
2014-03-19 12:10:20 +09:00
77e8061170
AP_Common: added product ID for L3G4200D
2013-10-08 11:50:53 +11:00
86b58314c4
AP_Common: pack the RallyLocation structure
...
so it can be written as a single binary block
2013-10-03 12:21:08 +10:00
823a40c203
AP_Common: Added RallyLocation struct.
2013-10-03 12:21:08 +10:00
f1e120113c
AP_Common: added OPTIMIZE() macro
...
this can be used to change the compiler optimization level of
individual functions
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2013-10-03 12:21:07 +10:00
13cdc56a5a
AP_Common: removed SMACCM support
2013-09-26 22:38:31 +10:00
c1d56f74b5
AP_Common: change flymaple product ID to 0x100
...
keep it well away from the Invensense product IDs for the MPU6000
2013-09-24 13:51:28 +10:00
8f61a36e58
AP_Common: Flymaple compatibility
2013-09-24 13:33:25 +10:00
8b80beadc4
PX4: make FMUv2 identify itself differently
...
so we can tell which is which in logs
2013-09-09 18:04:40 +10:00
97b7130bb9
libraries: update license header to GPLv3
...
we switched to GPLv3 a long time ago, but neglected to update the
per-file license headers
2013-08-30 13:01:39 +10:00
933088b95a
AP_Common: fixed indent-tabs-mode
2013-05-30 09:52:38 +10:00
62b9a580e8
AP_Common: make PACKED depend on architecture
...
this will remove lots of warnings when building with arduino
2013-05-09 20:10:31 +10:00
3659b532be
AP_Common: added BIT_IS_SET() macro
...
makes bit mask testing safer on PX4
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2013-04-23 23:05:02 +10:00
4fe5ce8a09
AP_Common: added a define for PACKED
...
neater than a pragma
2013-04-20 13:52:36 +10:00
c5f19f5df8
Plane: Implement issue 80: counterclockwise loiter
...
- libraries/AP_Common/AP_Common.h: Use bit 2 of Location.options to store
loiter direction
- ArduPlane/defines.h: New bitmask MASK_OPTIONS_LOITER_DIRECTION for struct
Location bit 2
- ArduPlane/ArduPlane.pde: New variable loiter_direction
- ArduPlane/GCS_Mavlink.pde: For mavlink loiter-commands use sign of param3 to
detemine direction. Set Location.option flag accordingly
- ArduPlane/commands.pde: Make sure loiter-directions get saved into EEPROM
correctly
- ArduPlane/commands_logic.pde: Set loiter_direction on all loiter-actions
as well as RTL/instant loiter
- ArduPlane/navigation.pde: Yield loiter_direction in update_loiter
2013-02-05 10:29:31 +11:00
cf5d102912
AP_Common: added board ID for PX4
2013-01-04 14:26:28 +11:00
a4af314b57
Add AP_HAL_SMACCM implementation.
...
- Add a board definition for SMACCMPilot.
- Support the SMACCM HAL in required utility libraries.
2013-01-03 13:48:06 -08:00
456e8bfb6e
AP_Common: include stdlib.h for abs()
2013-01-02 14:45:09 +11:00
ac8fcd5b23
AP_Common: include stdbool.h for ARM
2013-01-02 14:45:09 +11:00
57bf6531b4
Progmem: use right CONFIG_HAL_BOARD #ifdefs
2013-01-01 18:26:12 +11:00
3c0440b0b4
Math: use common degrees() and radians() functions
2012-12-20 14:53:22 +11:00
eb530b86e8
move Arduino.mk to /mk/Arduino.mk
2012-12-20 14:52:35 +11:00
28f0ce6185
Build: use -O0 for SITL
2012-12-20 14:52:33 +11:00
475496cee2
Revert "Arduino.mk: use target variables rather than recursive make for apm1, apm2.."
...
This reverts commit fcd58cc1d7892bb8b45db75c35e1bdccaa2d47bb.
still doesn't work ...
2012-12-20 14:52:33 +11:00
975506c840
Build: add debugging in SITL build
2012-12-20 14:52:33 +11:00
8fe3c5e5d6
Arduino.mk: use target variables rather than recursive make for apm1, apm2..
2012-12-20 14:52:31 +11:00
6a56f72918
Build: added empty Arduino.h
2012-12-20 14:52:30 +11:00
d473203737
Build: added global board targets
2012-12-20 14:52:30 +11:00
d93d932831
ArduCopter: defines fixes
...
Conflicts:
libraries/AP_Common/Arduino.mk
2012-12-20 14:52:28 +11:00
9b15d0e714
Build: update makefile for SITL build
2012-12-20 14:51:40 +11:00
da99f5f283
Arduino.mk: compile with CONFIG_HAL_BOARD define from the user's config.mk
2012-12-20 14:51:37 +11:00
fff4e87619
Arduino.mk: allow user avrdude flags
2012-12-20 14:51:36 +11:00
f490f2432d
Arduino.mk: norelax.inoflag will disable -Wl,--relax on a per sketch basis
...
* Some weird avr-ld bug that hits on 4.6.2 Fedora. Didn't have time to
investigate further.
2012-12-20 14:51:29 +11:00
3a2e138994
AP_Common: no c++ magic for PX4 build
2012-12-20 14:51:28 +11:00
a4f1f6a5db
AP_Progmem: fix dependencies for all sketches touched by AP_HAL_AVR
2012-12-20 14:51:28 +11:00
5c738810e2
AP_Progmem created: progmem macros per specific platform
...
* derived from AP_Common
2012-12-20 14:51:28 +11:00
a2f97ac7c7
AP_Common.cpp: Delete empty cpp file
2012-12-20 14:51:28 +11:00
f58935d1e7
AP_Common c++ lib: eliminate freeMemory and displayMemory
...
* also, no more error message in pure virtual call
2012-12-20 14:51:28 +11:00
9f9c183a4d
remove AP_Vector.h as deprecated
2012-12-20 14:51:28 +11:00
6a59ad143e
AP_Curve: made into its own library
2012-12-20 14:51:27 +11:00
f8047f158d
Arduino.mk: Changes to asm opts for compatibility with avr-gcc4.6
...
* Need to make sure these are compatible with older toolchains
before pushing to master
2012-12-20 14:51:26 +11:00
0d342a3293
AP_Common: use EXCLUDECORE macro to hack some debug messages away
2012-12-20 14:51:19 +11:00
7854c54880
Arduino.mk: when core is excluded, add -DEXCLUDECORE to flags
2012-12-20 14:51:19 +11:00
4493dbb4d2
Arduino.mk: support nocore.inoflag to do coreless builds of each sketch
2012-12-20 14:51:19 +11:00
b34d4cdb17
Remove empty AP_Var_menufuncs.cpp
2012-12-20 14:51:19 +11:00
3f1d9d7f69
AP_Param: #include <AP_Param.h> fixups for libraries & sketches
...
* I mostly went through with grep and added an #include <AP_Param.h> below
every #include <AP_Common.h>. Not all of these example sketches might
strictly need AP_Param.
2012-12-20 14:51:19 +11:00
c4dbe8c627
AP_Param: move from AP_Common to its own library
2012-12-20 14:51:19 +11:00
e82d1402ef
AP_Loop: moved to APO library, which is the only code that uses it
2012-12-20 14:51:19 +11:00
3c88b0d204
AP_Param: fixed Vector3f elements with 16 character names
2012-11-20 22:27:11 +11:00
b0713ba412
AP_Param: support up to 16 character parameter names
...
MAVLink allows for 16 chars, with no null termination if all 16 are
used
2012-11-20 21:35:22 +11:00
736cb4c34b
AP_Var: move the MetaClass lib into AP_Var
...
AP_Var is the only one that uses it, and it generates warnings in our
build if we leave it in AP_Common
2012-11-06 21:42:54 +11:00
ef919c4e36
AP_Param: fixed a bug with setting nested parameters
...
This bug meant that setting a parameter in a parent class for a doubly
nested parameter group, where the parameter index in the parent class
is 4 or greater would actually set the first element in that parent
class.
At the moment only one parameter fits these narrow constraints - the
RCn_DZ element of the RC_Channel_aux class. So if someone set RC5_DZ
to 17 in ArduPlane it would actually set RC5_MIN to 17.
2012-11-05 22:08:43 +11:00
79fc5f072e
AP_Curve: replace Serial.print with Serial.print_P to save 18 bytes of memory
2012-10-22 16:40:57 +09:00
1bf21aae20
AP_Menu: create new library with menu from AP_Common
2012-10-18 20:50:16 -07:00
76e93e9fd7
AP_Common: PSTR def has specific version for avr-gcc 4.6 compatibility
...
* Also a small change in FastSerial/vprintf.cpp, which duplicates the
PSTR definition
* Won't effect others using earlier versions of avr-gcc
2012-10-15 20:42:18 -07:00
5796ee91ca
AP_Semaphore: make into separate library rather than part of AP_Common
2012-10-09 10:55:06 -07:00
23442f9caf
AP_Semaphore: added new library to help remove conflicts over SPI bus
2012-10-06 12:41:35 +09:00
e761645e24
AP_Param: added find_by_index()
2012-09-20 07:42:35 +10:00
93ae29a3e9
ArduCopter: added throttle curve (although disabled by default) for all multicopters
2012-09-18 23:05:08 +09:00
f3945772e9
uncrustify libraries/AP_Common/AP_Vector.h
2012-08-21 19:19:51 -07:00
953cab5c5f
uncrustify libraries/AP_Common/AP_Test.h
2012-08-21 19:19:51 -07:00
4b60e53736
uncrustify libraries/AP_Common/AP_Loop.h
2012-08-21 19:01:03 -07:00
7d438cd65d
uncrustify libraries/AP_Common/include/menu.h
2012-08-21 19:01:02 -07:00
6bb8e4e8ac
uncrustify libraries/AP_Common/AP_Common.h
2012-08-21 19:01:02 -07:00
0c99546f45
uncrustify libraries/AP_Common/AP_MetaClass.h
2012-08-21 19:01:02 -07:00
e79d9adea0
uncrustify libraries/AP_Common/c++.h
2012-08-21 19:00:52 -07:00
3a26b94af2
uncrustify libraries/AP_Common/tools/eedump.c
2012-08-21 19:00:51 -07:00
4a50e56a48
uncrustify libraries/AP_Common/tools/eedump_apparam.c
2012-08-21 19:00:51 -07:00
3e4507a4a2
uncrustify libraries/AP_Common/menu.cpp
2012-08-21 19:00:51 -07:00
09c4f76b57
uncrustify libraries/AP_Common/AP_Param.cpp
2012-08-21 19:00:51 -07:00
c18e73a54d
uncrustify libraries/AP_Common/c++.cpp
2012-08-21 19:00:51 -07:00
ca476e5851
uncrustify libraries/AP_Common/examples/menu/menu.pde
2012-08-21 19:00:51 -07:00
42e24a869f
uncrustify libraries/AP_Common/AP_Param.h with fixups by hand
2012-08-21 19:00:51 -07:00
976679208c
AP_Common: change a few more "int" to "int16_t"
2012-08-18 18:05:18 +09:00
c70bae9617
AP_MetaClass: fixed a warning
2012-08-09 16:19:04 +10:00
7f4b7703c1
AP_Param: fixed some build warnings
2012-08-09 16:18:53 +10:00
e6e25525bc
AP_Param: avoid saving values within 0.01% of the default value
...
this saves some more space due to rounding errors
2012-08-08 13:13:30 +10:00
c298d5130f
AP_Param: major update to use default values in var_info table
...
this stores the default value for all scalar variables in the var_info
table, which makes it possible to avoid storing default values in
eeprom. That allows us to oversubscribe the eeprom space with a much
lower risk of overrun.
2012-08-08 12:11:57 +10:00
e1725e9ea5
AP_Param: added some docs on the eeprom header format
2012-07-10 14:03:49 +10:00
9d221b3625
AP_Common: fixed some duplicate product ID warnings
2012-05-17 23:37:32 +10:00
69bf5700cd
IMU: expose IMU_PRODUCT_ID as EEPROM Variable
...
this will allow us to log the Product ID in tlogs
2012-05-09 18:30:36 -07:00
4c46955612
PRODUCT: Define product IDs for all supported products
2012-05-09 18:30:36 -07:00
4f90e6e844
build: cope with Arduino 1.0 in command line build
...
this should autodetect 1.0 versus older builds
2012-04-27 15:38:42 +10:00
6e9ffb4249
correct small typos in comments
2012-03-11 21:30:09 +01:00
f4329d2680
AP_Param: ensure we can't have duplicate keys in Parameters.h
...
this is O(n^2), but only at startup, and takes less than 1ms to run.
It catches a very nasty coding error
2012-03-02 15:48:28 +11:00
337af0c7a2
AP_Param: nested group recursion into next_group disableable by macro
...
* c.f. 0251932c81fe7eb, e5515bb6ef82
2012-02-29 19:48:43 -08:00
2648694489
AP_Param: One more nexted group recursion disableable by macro
...
* c.f. e5515bb6ef82
2012-02-29 18:48:54 -08:00
eac8b66385
AP_Param: Make nested group recursion disableable by macro
...
* Eliminates recursive calls inside AP_Param.
This is important to Pat @ Galois, but not the project in general.
Recursion depth on these functions is bounded structurally using
existing nested group constructors (can't create loops in finite space)
and checked at init time
2012-02-28 16:28:27 -08:00
cb52b6c6d9
AP_Param: show numerical value in eeprom dump utility
2012-02-28 09:43:49 +11:00
a432232db9
AP_Param: fixed v.load() on a sub-element of a AP_Vector3f
...
this isn't actually used at the moment in APM, but we should get it
right in case someone does try to load a single element of a vector
2012-02-28 09:43:49 +11:00
87a6d97f7b
AP_Param: fixed setting of CAM_P_G in ArduCopter
...
the variable CAM_P_G has the same prefix as the CAM_P group. We want
to allow for parameters having a common prefix with a group, so we
need to keep searching after we've found a group that matches the
prefix
2012-02-27 10:54:33 +11:00
fa443bd928
AP_Param: make the templating code a bit clearer
...
add comments on the arguments, and name them in a clearer way
2012-02-27 10:54:33 +11:00
f10097a6d5
AP_Param: added some comments on AP_Vector3f handling
2012-02-25 11:37:20 +11:00
2e9105c68a
AP_Param: added special handling for Vector3f
...
We would like to be able to use Vector3f as a parameter while exposing
the individual elements of the vector as MAVLink parameters. This
change to AP_Param makes that possible, by giving AP_Vector3f a dual
personality
2012-02-25 11:37:20 +11:00
53b87229ff
AP_Param: added ParamToken type for variable list traversal
2012-02-19 17:05:28 +11:00
882cd4ea83
AP_Param: moved AP_Vector3f and AP_Matrix3f declarations to AP_Math.h
...
this avoids us needing AP_Math.h in every utility sketch and example
2012-02-18 10:51:57 +11:00
4b15b63d21
AP_Param: fixed copy-assignment operators for AP_Param vectors
2012-02-18 10:51:57 +11:00
7f3858cb7f
AP_Param: added a set_and_save_ifchanged() method
...
this can be used to avoid the scan() in more frequenctly saved
variables, such as the MAVLink stream rates in APM
2012-02-18 10:51:57 +11:00
80a6773b8b
AP_Param: added an initialised() method
...
this will be used by the compass code
2012-02-18 10:51:57 +11:00
2f81776b0d
eedump ap param in perl
2012-02-15 21:31:58 +08:00
048aed5427
fixed dump size
2012-02-15 10:44:09 +11:00
089db43183
show group_element too
2012-02-15 10:42:21 +11:00
ea6a46fc9b
AP_Param: added eeprom_aaparam.c dump utility
2012-02-15 10:41:06 +11:00
601a991a46
added SITL_debug() macro
...
this can be used to print a message into the logs in the SITL
simulator. This will be used for critical conditions.
2012-02-15 08:50:45 +11:00
be5ffdedbb
AP_Param: allow dumping of AP_Vector3f
...
this means the 'show' command in the CLI shows the compass offsets now
2012-02-14 08:34:50 +11:00
74bbc72b11
move AP_Var code and example into libraries/AP_Var
...
you can use AP_Var by defining USE_AP_VAR
2012-02-13 16:22:53 +11:00
d55a0c3a71
added AP_Param::show_all()
...
this moves the logic into common code
2012-02-13 16:22:52 +11:00
9175ebe33a
change back to 256 max variables in _var_info[]
...
this keeps the header to 24 bits, and allows the token to be 16
bits. If we need more variables we can put them in a nested group.
2012-02-13 16:22:52 +11:00
f2a6a31645
AP_Param: added group idx, and change packing of header elements
...
adding a idx element to the GroupInfo will make it less likely that a
developer will change the IDs of group elements, and make it easier to
see that these IDs are important for identifying a variable in EEPROM
The header packing has changed to make it 24 bits on all platforms,
which allows us to lower the EEPROM variable max size to 1024 bytes
again
2012-02-13 16:22:52 +11:00
678a1df3be
fixed support for AP_PARAM_SPARE
...
spare group elements are needed if we remove a group parameter
2012-02-13 16:22:52 +11:00
accaf9bb30
fixed build on arduino 1.0
2012-02-13 16:22:52 +11:00
5418302b38
AP_Param: fixed desktop build
2012-02-13 16:22:51 +11:00
95e107ab75
AP_Param: added generic cast_to_float
2012-02-13 16:22:51 +11:00
9509c69f42
AP_Param: disable debug ready for production
2012-02-13 16:22:51 +11:00
5d03f13aa5
AP_Param: make ptype in first() and next() optional
2012-02-13 16:22:51 +11:00
e8c4ecf9fa
added nested group support and validation
2012-02-13 16:22:51 +11:00
94a86204ee
added size of Vector6f
2012-02-13 16:22:51 +11:00
497a400841
hacks to get AP_Param to compile
2012-02-13 16:22:50 +11:00
5b842a447f
new AP_Param subsystem
2012-02-13 16:22:50 +11:00
ed19c25a97
Arduino 1.0 - changed all #includes of "WProgram.h", "wiring.h" and "WConstants.h to "Arduino.h".
...
Modified FastSerial's write function to return size_t (number of bytes written).
2012-01-28 12:25:47 +09:00
9c5a776456
Teach the Makefile about the new Arduino sourcefile suffix
2012-01-15 11:51:38 -08:00
e2830ca147
fixed type error
2012-01-10 23:43:44 -08:00
92886cfa10
make file relax
2011-12-17 20:42:51 +08:00
f4b7aea1ee
add relax
2011-12-17 16:53:14 +08:00
997ddde7f5
Added back the feature to prompt users when an invalid CLI command is entered.
...
Thanks to Yury Smirnov for this patch!
2011-11-26 21:10:53 -07:00
0da5125b7f
upload: force hex file format for upload
...
this should fix a problem with hex file format detection on MacOS
2011-11-27 09:36:10 +11:00
7fa59a6849
AP_Common: added typesafe wrapper for memcpy_P()
2011-11-26 17:17:50 +11:00
92e0e929a4
AP_Common: replace strlcat_P() with a C implementation
...
the one in the Arduino libc was giving us bogus results on one
machine, and is suspect. We couldn't spot what is wrong in the
assembler, but replacing the implementation with a C one fixes the
bug, so we replaced it
2011-11-26 17:02:56 +11:00
6e9e857157
make configure default to 2560
...
1280 is less common for devs these days
2011-11-25 20:00:17 -08:00
a159669cee
build: added jtag-program make target
...
useful for when you have hosed your USB
2011-11-25 20:00:16 -08:00
7ef8578029
Separated controller block class.
...
Also improved documentation of AP_ControllerBlock.
2011-11-24 13:28:14 -05:00
8017b0415e
Working on new hil message for mavlink.
2011-11-15 17:15:54 -05:00
b927e64440
desktop: fixed 2 crashes in the menu code
...
handle an empty line gracefully, and use pgm_read_pointer() for
functions pointers in progmem
2011-11-07 22:56:13 +11:00
d78bbb1a40
added pgm_read_pointer()
...
this will be used by the menu code to make reading pointers from
progmem portable
2011-11-07 22:56:13 +11:00
251cf7d87c
force LANG=C for MacOS awk
2011-11-07 13:33:38 +11:00
77da85648d
Clean up formatting for AP_Common
2011-10-28 14:43:43 -04:00
32af63f734
Added battery monitoring, arming to apo.
...
Arming added for quadrotor. Need to add to rover still. Battery
monitoring added with auto shut-off in quadrotor controller.
Finally split apo header and source files to allow faster
compiling/ fix cyclic header inclusions.
2011-10-16 02:55:34 -04:00
bcb8fb1c7f
desktop: silence an implicit cast warning
2011-10-11 20:53:43 +11:00
0939b51a4c
added build makefiles
2011-10-10 07:18:38 +11:00
41dd8d60ba
use ifdef for DESKTOP_BUILD
2011-10-09 22:16:14 +11:00
7098e8cfa1
first rough build for desktop CPUs
...
this allows ArduPlane to build and startup on 'desktop' systems (eg. a
Linux box). Very rough for now, and only for HIL so far
2011-10-09 22:16:13 +11:00
28ebca1bf6
fixed PROGMEM declaration for desktop build
2011-10-09 22:16:13 +11:00
bcc2aed8fb
initialise spare bits in AP_Var headers
...
if we ever need these bits, it would be nice to know that they are
zero in existing eeproms
2011-10-09 22:09:00 +11:00
00d52a8bd7
ap_common: use intptr_t for pointer casts
...
this allows building on systems with pointers that aren't 16 bits long
2011-10-09 22:08:59 +11:00
45950489d1
More improvements to MS Windows
...
Now the avr-gdb, avrdude and avarice tools do not need to be in the path.
2011-10-03 19:16:55 +02:00
7a510084b1
Fix serial port on windows
2011-10-03 12:10:27 +02:00
550deffbe8
Make it work on windows "out-of-the-box"
2011-10-03 12:08:19 +02:00
c37fabea66
Added a comment to the BOARD type of teh make configure output file
2011-10-02 00:04:21 +02:00
eaaf44e2c8
Fix Arduino version detection on some systems
2011-10-02 00:03:57 +02:00
0c7c508541
Optional recursion added.
2011-09-30 17:17:51 -04:00
9e6b47184a
Arduino version directory updated to lib/version.txt
...
Also updated cmake files.
2011-09-29 22:10:26 -04:00
5489b84f8e
Improvements to cmake.
2011-09-29 21:23:26 -04:00
71fbdf721a
Added APO branch.
2011-09-28 20:51:12 -04:00
03740469fd
fix quotes and indentation
2011-09-27 04:40:00 +02:00
9c766d6373
Added override for mega upload protocol.
2011-09-26 20:29:09 -04:00
6abb8a0796
Modified Arduino.mk to use correct upload protocol if not overrided.
...
The previous comment of upload protocol not working cannot be verified on
linux. If this problem persists on cygwin, please override with
UPLOAD_PROTOCOL=arduino in the enivornment before calling Arduino.mk
2011-09-22 13:35:26 -04:00
ba6c58a33c
build: cope with more depths for libraries
...
this finds the libraries at more levels up from the current directory
2011-09-17 14:58:02 +10:00
d5e5240e19
Issue #415 : Modified spotlight search string. Added UPLOAD_PROTOCOL parameter to makefile to use different programmer.
2011-09-15 22:38:22 +03:00
42abbb41fd
Add options to generate assembly listings for all of the compiled
...
files. This is a possible starting point for a tool to analyse the
call graph and stack usage of APM.
It's also interesting by itself.
2011-09-14 22:39:34 -07:00
a4e001bbcf
Adding CMake support
2011-09-14 15:44:55 +02:00
c0b4cb661f
GNU sed wants -r, Darwin/BSD sed wants -E.
2011-09-12 18:43:31 +00:00
c1460add3b
Reinstate a Cygwin workround that was backed out by the previous changes.
...
Not all platforms support (or require) the -r argument to sed.
2011-09-11 22:20:54 -07:00
6dbfd78197
updated make file for cygwin compatibility
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3277 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-05 17:15:01 +00:00
dab8c0cca8
AP_Var: added EEPROM wear levelling
...
This adds a variable length dummy variable at the front of the EEPROM
when we erase it, which has the effect of moving the location of any
hot variables within the EEPROM. This should improve EEPROM
life. Thanks to Mike for the implementation.
Pair-Programmed-With: Mike Smith
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3234 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:39:57 +00:00
06c4f60490
AP_Var: avoid wearing out EEPROM by re-writing the same value
...
when saving a variable, this avoids EEPROM wear by checking if the
existing value is already the same as the value being written, and
avoiding the write.
Thanks to Mike Smith for the implementation
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3233 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:39:49 +00:00
e099079cc0
AP_Var: fixed a logic bug in APVar::key()
...
We were using && instead of & for a bit check. Thanks to Mike for
spotting this!
Pair-Programmed-With: Mike Smith
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3232 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:39:40 +00:00
b8b8b7e8ca
AP_Var: fill all of EEPROM with 0xFF on erase_all()
...
This wipes all parameter values, and also clears out any waypoints as
the waypoint format could have changed between firmware revisions.
This also ensures that the AP_Var code can't re-use any key values
from the old EEPROM state, which makes us less dependent on the old
EEPROM being in a good state
Pair-Programmed-With: Mike Smith
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3231 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:39:28 +00:00
5b3079bcd6
Fixed debug command.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3196 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-30 17:33:51 +00:00
1e08040002
update to arduino.mk file to allow easier use with cygwin.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3166 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 23:02:39 +00:00
88d59ccc2d
perl version of eedump
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3037 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-07 10:36:31 +00:00
a9278b6fcd
build: added EXTRAFLAGS to make rules
...
this allows you to create a local makefile like this:
include Makefile
hil:
make -f Makefile EXTRAFLAGS="-DHIL_MODE=HIL_MODE_ATTITUDE -DSERIAL3_BAUD=115200"
and then use 'make hil'
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2843 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-13 09:07:09 +00:00
cd864714ea
Add a simple tool for dumping AP_Var data from an EEPROM dump.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2676 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 07:56:38 +00:00
56483bc322
Added debug/ upload targets to Arduino.mk
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2656 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 21:36:20 +00:00
a3950ca63e
Added config.mk file inclusion for global configurations settings on make based builds. See ArduPilotOne for scripts/configure to see an example. config.mk should be located in the temporary directory where the rest of the build results are placed.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2655 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 19:01:06 +00:00
582cc1e229
Enable map file generation.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2636 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-22 05:54:55 +00:00
ea728060f3
disable the re-ordered initialisation warnings
...
these are not useful for us, and will always happen with our parameter
code
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2561 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:25:10 +00:00
9cb9a54d64
fixed a warning in AP_Var.h
...
index is in system headers as a string function
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2558 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:24:40 +00:00
7809b0ca2a
Massive warning fixes.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2089 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-04 19:12:27 +00:00
4f7402eee9
Suppress warnings from the Arduino core, since we can't do anything about them.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2076 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-03 05:04:27 +00:00
f5ba77f23b
Rename some ctor arguments to suppress shadow-related warnings.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2071 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-02 05:55:34 +00:00
fe648644ce
added a few more warning flags for when building with the Makefile
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2070 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-02 05:50:13 +00:00
5a273e52d2
Added const AP_Var access.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1958 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-01 19:29:33 +00:00
e6d86e7efa
removed yaw towards WP option. Should now be handled with a mission script.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1954 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-01 04:55:07 +00:00
e74dabca33
Added more wp options
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1884 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-04-16 04:49:46 +00:00
0a00e4ff21
Print the key associated with a variable when the variable is printed using AP_Var_menu_show.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1812 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-25 02:51:03 +00:00
76a5a48206
Add an interface for locating a variable by key.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1811 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-25 02:46:45 +00:00
596b33a08b
Change waypoint/command storage to include options byte.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1809 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-23 03:29:46 +00:00
a633617eef
added -Wformat in Arduino.mk
...
when building with 'make' we get warnings related to printf() format
strings
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1798 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:26:03 +00:00
860998d337
implemented typesafe PSTR()
...
This makes PSTR() type safe by using a 1 byte wrapper
structure. Attempts to use the wrong varient of a print function will
generate a compilation error.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1797 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:25:48 +00:00
bb715378a1
removed options - not going to go that route without proper GCS support.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1760 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-09 06:38:46 +00:00
852b3874d5
Added Options Bitmask to Location Struct
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1741 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-05 04:39:23 +00:00
86ca9562b5
Fix ::set_and_save to return the result of the ::save call.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1707 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-21 05:12:58 +00:00
5fe288dd43
Fix the return value from ::save() on AP_Var_groups so that the caller can verify that a save was successful.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1706 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-21 05:11:02 +00:00
e85b2d3c17
Increase the maximum save size to 64B, so that a Vector3f can be saved.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1704 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-21 04:42:28 +00:00
72e112e8c0
Fix AP_Var::load - it has to ask the serialiser, not the unserialiser, for the variable's size.
...
Fix AP_Float16 - scaling was being done in the wrong direction, and the unserialiser wasn't reporting errors.
Add test cases for the above.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1696 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-20 00:38:09 +00:00
bffe20ed5e
Add a little code to track the amount of memory used by AP_Var subclasses.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1661 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-16 07:01:17 +00:00
e2d4c9e901
Use a more explicit loop termination condition.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1657 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-14 17:49:02 +00:00
fabcfd942b
Don't return a name for a variable if it has no name, even if it's in a group that does have a name.
...
When displaying variables, don't display variables with no name, or that are groups.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1656 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-14 17:44:33 +00:00
991acad1f0
Add a constant that can be used to identify groups.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1653 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-14 07:11:42 +00:00
0b60757b43
Add a template AP_VarS that handles arbitrary structure/class types.
...
Note that the object must still be <= 32 bytes in size to be saved/loaded.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1644 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-14 01:47:24 +00:00
61d65f652c
Fix for log() being a bad idea.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1617 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-09 23:15:11 +00:00
4632dd2f29
Implement a cast_to_float method for convenience; at a cost of a couple of bytes in the vtable this will save many callers having to play type introspection games.
...
It might be possible to implement a set of virtual cast operator overrides, but only float lets us return NAN to indicate that a cast can't be made, so for now we'll stick with just this one.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1614 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-02-08 10:17:45 +00:00
b614aca274
Add a template AP_VarA that defines a variable that is an array of some basic type. This is like AP_VarT for arrays, with minor changes in behaviour consistent with the difference between regular variables and arrays.
...
Note that AP_VarA arrays are still limited by the constraints on the total size of a variable (AP_Var::k_size_max).
Add a basic unit test for arrays; more are needed.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1579 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-30 20:58:34 +00:00
ca0005db2a
Comments, minor consting, use a better target for sizeof in AP_VarT
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1578 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-30 20:14:42 +00:00
b60480fac0
Minor whitespace fixes.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1577 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-30 20:13:07 +00:00
c18fd76449
Try to pre-empt subsequent inclusions of wiring.h by grabbing it here and giving ourselves a chance to undo some of the less well-advised macros it defines.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1554 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-24 02:44:31 +00:00
34f43934da
Move the unit test framework out of the unit tests. Add unit tests for the k_typeid_* constants.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1543 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 23:59:26 +00:00
b58693f203
Add a function to AP_Var for finding a variable by name. It is not efficient, but convenient for e.g. interactive use.
...
Add pseudo-constant copies of the AP_Meta_calss::Type_id for the standard AP_VarT subclasses. This makes checking the type of a possible AP_Var much cheaper than calling ::meta_cast, as there is no object con/destruction involved.
Add some helper functions for manipulating AP_Vars from Menu interfaces.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1541 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 23:58:07 +00:00
2caea855cd
Don't include AP_Vector (in preparation for retirement) and AP_Loop (because it's not being used by APM*). Interested clients can still include AP_Loop if they need it.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1540 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 23:48:07 +00:00
2f263229f9
Rename AP_Meta_class::AP_Type_id to AP_Meta_class::Type_id in keeping with the coding standard.
...
Add a non-static version of AP_Meta_class::meta_cast that can be used against any subclass object directly.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1539 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 23:46:58 +00:00
8c9ece1f37
Fix a serious typo, add more documentation.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1538 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 20:33:20 +00:00
7a3d33844a
Move the Test unit test framework out into its own header, so that it can be used by other libraries.
...
Add some documentation explaining how it is used.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1537 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 20:26:11 +00:00
8cc7e658b0
Simplify AP_Var_group::_serialize_unserialize slightly by removing some variables.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1535 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 10:04:24 +00:00
4b21f3485a
Improve performance when saving a number of variables that don't have space allocated in the EEPROM. This avoids scanning the entire EEPROM every time a variable that has not yet had space allocated is written.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1534 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 09:56:58 +00:00
655f7a21ff
Fix ::save_all/::load_all so that they check the correct criteria for opt-out. Now load/save_all work.
...
Fix prototype for AP_Var_group::serialize so that it's called correctly when saving a group. Now group load/save works.
Add load/save_all and group load/save unit tests.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1533 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 09:27:58 +00:00
e7da843d90
Fixes for EEPROM space allocation and mapping.
...
- We can't count on the first EEPROM scan knowing about everything; new variables may be constructed later so be willing to go back and re-scan the EEPROM if we encounter a new variable that hasn't been loaded yet.
- Sort out where _key actually points (the variable's data) in the EEPROM and get everyone to use the same interpretation.
- Fix return values from ::save and ::load.
- Make it possible to re-save after ::erase_all by de-locating all variables before the EEPROM is blown away.
- Fix args to eeprom_read_block/eeprom_write_block so that we don't spam random memory.
Add unit tests for basic save/load operations.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1532 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 08:11:53 +00:00
39fea200ca
I never liked the plan that variable groups could only be statically scoped; it was much too fragile. These changes address that issue by splitting the global variable list into two lists, one for standalone variables (including groups), and one for variables that are members of a group.
...
Now a variable belonging to a group can safely be constructed before the group it belongs to, and the group can be destroyed before its member variables. This greatly simplifies the AP_Var constructor(s).
Remove the lookup-by-index and lookup-by-key interfaces to AP_Var and replace them with first/next interfaces for all variables, and for variables belonging to a specific group. Document their usage. Add an accessor for the key associated with a variable so that search-by-key can be performed by a consumer. Throw away the lookup cache implementation, as it's not required anymore.
Re-layout the EEPROM variable header and tweak the EEPROM space allocator so that it's more resistant to interruptions during variable save.
Fix the global constants so that they work.
Add an interface for erasing all variables in EEPROM (only writes one byte).
Fix unit tests so that they work with the changed interfaces. Also tweak the unit test framework so that it doesn't inline all its code. This is a WIP - many more tests need to be written still.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1531 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 06:52:59 +00:00
de71731994
Add a templated version of AP_Meta_class::meta_type_id so that you can get a type ID for any named type without having to have an instance of the type lying around. Update the comments about caching type IDs to reflect its availability.
...
Fix the comments around AP_Meta_class::meta_cast; they were leftovers from an earlier implementation and entirely not helpful.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1530 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-23 06:44:07 +00:00
39b718fce0
Implement the missing AP_Var_group::*serialize functions.
...
Rather than implementing empty default constructors, make sure that AP_Var and friends have useful default constructors instead. This works around AP_Meta_class::meta_cast requiring a default constructor without having empty ctors scattered around.
Add accessors to AP_Var so that the global variable list can be traversed and the group/variable relationship comprehended by outsiders.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1523 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-22 18:42:44 +00:00
30d9a92c4e
Implement a pure data serialisation load/save model for AP_Var.
...
The format is a simple TLV format; a tag identifying the variable, a length for the variable, and then the actual data. This format could ultimately be extended to include waypoint/commands as well.
This allows us to load and save groups of variables to EEPROM without having to have a static EEPROM map.
Still needs unit tests and (probably) bugfixing.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1522 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-22 08:37:52 +00:00
05622fe225
Updated AP_RcChannel for AP_Var.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1509 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-18 04:56:45 +00:00
96d2dc33fe
Formatting and naming changes for conformance with the ArduPilot Coding Conventions.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1502 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-16 09:14:21 +00:00
aaf125e441
Based on explaining AP_VarNoAddress to Doug, improve the description of the value.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1491 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-12 02:43:25 +00:00
dd6ede36ee
Add more unit tests for AP_Var.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1466 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-10 01:44:23 +00:00
6366cdc094
Add more documentation for AP_MetaClass.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1465 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-10 01:43:41 +00:00
44cac7a853
Add a new macro PROGMEM_STRING that can be used to define a constant string in program memory.
...
This is a partial workaround for not being able to use PSTR at global scope, e.g. in an argument to a constructor; it makes the intent of the otherwise somewhat bulky declaration of the string more obvious.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1464 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-10 01:42:59 +00:00
e299d5f58a
Add a flags byte to variables, and implement a "no auto load" bit that opts variables out of load_all / save_all.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1449 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-05 17:56:46 +00:00
c0de571afd
Save AP_Var's initial value as a default value, and add a function for restoring the default value.
...
Fix the AP_Var::lookup cache, which was very busted.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1448 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-05 09:25:07 +00:00
0e868ca343
More unit tests.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1447 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-05 07:40:35 +00:00
765cef724d
Fix the assignment operator overload for AP_VarT so that direct assignments to the type work correctly.
...
Add a variant of AP_Float that stores the value as Q5.10 (16-bit fixed-point) to save EEPROM space.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1446 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-05 07:40:06 +00:00
d8046957c6
Unit tests for scope-based address offsetting.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1418 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-04 08:50:24 +00:00
63643f73fc
Move the AP_Var ctor out of the class definition; it's big enough that we don't want to inline it.
...
AP_Vars with either a name or an address are 'interesting' (the latter so we can save_all).
Add the concept of address offsets to scopes. Now we have a container that we can put AP_Vars into that can be moved around in the EEPROM. This will make it easier for things like the PID library which need to support multiple instances getting their parameters from different parts of the ROM.
Improve documentation.
Suck it up and admit that we aren't going to do "identity"-based addressing for the EEPROM and just call the property "address".
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1417 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-04 08:49:55 +00:00
d2bd744244
Metaclass improvements:
...
- Add a default ctor/dtor pair. The dtor ensures that all dtors are virtual, and guarantees that there is something in the dtor vtable slot for classes that don't implement their own.
- serialize must not alter the class, mark it const
- Improve documentation
- Fix handle validation to prevent trying to read 2 bytes beyond the end of memory
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1416 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-04 08:46:01 +00:00
57f3f4e65b
Beef up the unit tests for AP_Var. Most of the basic functionality is now covered.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1403 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-03 02:29:17 +00:00
277105c437
Rename the base class for variables AP_Var; less confusing, less to type. Rename the template type instead.
...
We don't need any of the arithmetic overloads, so strip them.
Fix includes.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1402 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-03 02:28:35 +00:00
ea9c7859f8
Don't allow the default serialize/unserialize to be inlined.
...
Fix some includes and remove an old implementation of meta_cast.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1401 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-03 02:26:18 +00:00
a02136236f
Add the ability to find the sketchbook when called from a Makefile in a library example.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1400 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-02 22:16:21 +00:00
a3a9fe59e3
Following discussions with James, a complete rewrite of AP_Var.
...
The overriding principle here is to keep the use of AP_Vars as simple as possible, whilst letting the implementation do useful things behind the scenes. To that end, we define AP_Float, AP_Int8, AP_Int16 and AP_Int32. These are strongly typed, so that there is no ambiguity about what a variable "really" is.
The classes behave like the variables they are storing; you can use an AP_Float in most places you would use a regular float; you can add to it, multiply by it, etc. If it has been given an address in EEPROM you can load and save it.
Variables can be given names, and if they are named then they can be looked up. This allows e.g. a GCS or a test tool to find and traffic in variables that it may not explicitly know about.
AP_Var does not attempt to solve the problem of EEPROM address space management.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1399 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-02 22:14:36 +00:00
68be029a17
Don't define constant AP_Var's extern
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1381 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-01-01 00:31:39 +00:00
634f2734b5
Added AP_Controller library.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1379 f9c3cf11-9bcb-44bc-f272-b75c42450872
2010-12-31 06:20:28 +00:00
Randy Mackay
Andrew Tridgell
Emile Castelnuovo
Michael Day
Mike McCauley
Jochen Tuchbreiter
James Bielman
Pat Hickey
Pat Hickey
Craig Elder
Amilcar Lucas
Michael Oborne
Mike Smith
Jason Short
Doug Weibel
James Goppert
Wenyao Xie
James Goppert
Janne M
unknown
DrZiplok
joeholdsworth@gmail.com
tridge60@gmail.com
james.goppert
mich146@hotmail.com
DrZiplok
jasonshort
deweibel@gmail.com
DrZiplok@gmail.com