Commit Graph

966 Commits

Author SHA1 Message Date
Andy Piper c8e464ebea AP_HAL: add HAL_ENABLE_THREAD_STATISTICS to boards 2020-12-30 18:15:05 +11:00
Ari Krupnik cfb1213f43 AP_HAL: standard spelling of variant 2020-12-25 00:01:50 +11:00
Andrew Tridgell 19723e6e75 AP_HAL: make uart pointers private
this ensures they cannot be used by library or vehicle code, so we
will be able to remove them in future
2020-12-15 10:32:46 +11:00
Andrew Tridgell 195ec0316a AP_HAL: fixed example fw for SERIAL naming 2020-12-15 10:32:46 +11:00
Andrew Tridgell 95c0852b13 AP_HAL: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell 8678759da4 AP_HAL: added hal.serial() access to uarts
this gives access to serial ports in the SERIALn_ order. It is inlined
by the compiler so using hal.uartB and hal.serial(3) generates
idential code on stm32 (tested on H7).

This is a step towards eliminating hal.uartX completely and the
horrible uartB ordering
2020-12-15 10:32:46 +11:00
Tom Pittenger 6630645915 AP_HAL: ap_periph should disable HAL_SUPPORT_RCOUT_SERIAL by default 2020-12-09 07:53:09 -08:00
Andy Piper d2e01005ee AP_HAL: add support for @SYS/dma.txt for DMA contention 2020-12-02 18:17:23 +11:00
Andrew Tridgell 68fdf033ee AP_HAL: support uartI, allowing a total of 9 uarts
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Tom Pittenger 089f3aa349 AP_HAL: allow hwdef to define HAL_SUPPORT_RCOUT_SERIAL - must be disabled for AP_Periph 2020-11-25 14:20:53 +11:00
Andrew Tridgell 5e8380ff41 AP_HAL: allow replay on ChibiOS 2020-11-10 16:15:45 +11:00
Andrew Tridgell 2596875ceb AP_HAL: removed fs_init()
this must go via AP_Filesystem
2020-10-27 10:45:03 +11:00
Peter Barker 3cce6197a1 AP_HAL: delete copy constructors 2020-10-13 19:55:34 +11:00
Pierre Kancir 1c80b04544 AP_HAL: add virtual set_cmdline_parameters() 2020-10-13 10:31:21 +11:00
Peter Barker 9bde294112 AP_HAL: add chargen UARTDriver example 2020-10-09 19:14:59 +11:00
bugobliterator d1eb9e8aea AP_HAL: add FilteredCAN mode to tell driver to init as such 2020-10-08 09:31:35 +11:00
mhefny 1200d0e2f8 AP_HAL: add PROBE_IMU_I2C2 to linux.h 2020-10-06 09:27:26 -07:00
Andrew Tridgell c62b86e3c1 AP_HAL: added timer_tick() on GPIO 2020-10-02 09:38:24 +10:00
Siddharth Purohit 22ab426cf2 AP_HAL: make bools to use single bit in CANTxItem 2020-09-24 12:32:19 +10:00
Siddharth Purohit 0ca2f56b71 AP_HAL: add support for external buffer to be used in ByteBuffer 2020-09-24 12:32:19 +10:00
Siddharth Purohit 9aa0970eed AP_HAL: disable protocol drivers for bootloader builds 2020-09-24 12:32:19 +10:00
Siddharth Purohit c7d69e4d13 AP_HAL: disable CAN Protocol Drivers for AP_Periph 2020-09-24 12:32:19 +10:00
Andy Piper ad895c2654 AP_HAL: ringbuffer get_size cannot be const because of semaphore 2020-09-22 09:37:02 +10:00
Andrew Tridgell 4b1552eebe AP_HAL: added BUS_TYPE_MSP
for MSP sensors
2020-09-09 06:35:50 +10:00
Peter Barker 55f72c1534 AP_HAL: create and use new AP_HAL::PWMSource object 2020-09-08 16:10:50 +10:00
Michael du Breuil d905282c1e AP_HAL: Don't redefine allowing double math in SITL/Linux if already defined 2020-09-03 09:56:29 +10:00
Patrick José Pereira 11c19a2dde AP_HAL: RCOutput_Tap_Linux: Include arm/ioctls.h
Add missing include for TCGETS2 while compile with MUSL

Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-08-25 07:15:00 -07:00
Siddharth Purohit 15abca8ba4 AP_HAL: add native clock info methods used inside other than main thread 2020-08-19 17:31:09 +10:00
Siddharth Purohit aa893b3983 AP_HAL: add available method for locked state 2020-08-19 17:31:09 +10:00
Siddharth Purohit fa0f1e4c71 AP_HAL: add CANIface HAL, replace uavcan dependent one 2020-08-19 17:31:09 +10:00
Siddharth Purohit 697e4141cb AP_HAL: add common Event interface 2020-08-19 17:31:09 +10:00
Peter Barker 26666b4b3d AP_HAL: move battery type enumeration out of parameters object 2020-08-11 13:21:52 +10:00
bugobliterator 57dd0ca9ea AP_HAL: add support for Bank based addressing 2020-08-06 12:41:35 +10:00
Andy Piper d545f392fb AP_HAL: set base type of FrequencyPeak to uint8_t 2020-08-05 17:20:03 +10:00
Siddharth Purohit d31b44fa79 AP_HAL: add methods to extract devid details 2020-07-27 19:48:15 +10:00
Michael du Breuil 1fef30eef1 AP_HAL: Extend UART options to include forwarding MAVLink telemetry 2020-07-22 07:17:49 +10:00
Peter Barker bd8c4017bc AP_HAL: log accumulated power status flags; all flags ever set 2020-07-21 09:12:14 +10:00
Peter Barker 85b1264ff4 AP_HAL: add WARN_IF_UNUSED to several methods 2020-07-20 10:19:47 +09:00
Andrew Tridgell 19093e25be AP_HAL: added ptr accessors to sparse-endian.h 2020-07-07 10:23:00 +10:00
Peter Barker fd3dd77489 AP_HAL: rename ringbuffer empty() to is_empty() 2020-06-09 10:21:48 +10:00
Peter Barker d259c03079 AP_HAL: BetterStream add a read(uint8_t*buffer, uint16_t count method 2020-05-26 15:59:11 +10:00
Peter Barker a8d03990ec AP_HAL: add discard_input method on UARTDriver 2020-05-26 09:20:32 +10:00
Andy Piper e2ef0bd36e AP_HAL: collect data for three largest peaks
new dsp peak detection algorithm
add DSP sketch with frequency ascii art
tool to generate gyro data frames from batch sampled DF logs
add generated data from real Y6B flight
allow fft_start() to use ObjectBuffer<float> for lock-free access
allow ObjectBuffer to be resized
2020-05-24 07:43:34 +10:00
Peter Barker 141d7fed48 AP_HAL: create and use INTERNAL_ERROR macro so we get line numbers 2020-04-30 13:21:36 +10:00
Andrew Tridgell a25ea5addc AP_HAL: added thread name to persistent data
this addes the first 4 bytes of the thread name to persistent data. It
also re-arranges the data so that it is more efficiently packed,
allowing us to fit the new field
2020-04-29 07:36:55 +10:00
Andrew Tridgell 164022ca12 AP_HAL: added thread_info() API 2020-04-29 07:36:55 +10:00
Andrew Tridgell 34df438560 AP_HAL: added wait_pin() API
for waiting on data-ready lines
2020-04-23 07:28:13 +10:00
Andrew Tridgell efe78fe3e1 AP_HAL: allow SITL to emulate 3 different types of flash storage 2020-04-14 10:02:51 +10:00
Andrew Tridgell e1792f89db AP_HAL: fixed default HAL_STORAGE_SIZE for flash storage 2020-04-14 10:02:51 +10:00
Peter Barker 73e43d8da5 AP_HAL: send statustext at regular intervals after watchdog reset 2020-03-31 14:30:11 +11:00
bugobliterator afea703aaf AP_HAL: ensure libc realloc is available for all platforms except ChibiOS 2020-03-24 10:32:14 +11:00
bugobliterator c615bd9874 AP_HAL: implement standard realloc method 2020-03-24 10:32:14 +11:00
Peter Barker a59c3670c8 AP_HAL_ChibiOS: stash lr_thd in watchdog hardfault handler 2020-03-19 16:03:58 +11:00
Andrew Tridgell add7615ed9 AP_HAL: removed unnecessary subtypes 2020-03-14 08:35:32 +11:00
Andrew Tridgell 58b4b523fd AP_HAL: added in_expected_delay()
allows for error message suppression when delays are expected
2020-03-11 16:30:06 +11:00
Peter Hall 6ab13333c2 AP_HAL: support ProfiLEDs 2020-03-10 10:37:26 +11:00
Peter Barker 09562e1f13 AP_HAL_Linux: use constants for high/low rather than defines, like ChibiOS
These are really bad defines to have hanging around for general use.
2020-03-03 10:46:06 +11:00
Andrew Tridgell 5d15d867b5 AP_HAL: adjust LED API to allow more than 32 LEDs on a pin 2020-02-27 13:12:26 +11:00
Andy Piper 509341957f AP_HAL: check for div0 in quinn's estimator 2020-02-25 08:35:09 +11:00
Andy Piper f4a99a1589 AP_HAL: hardware abstraction for FFT.
control inclusion of FFT based on HAL_WITH_DSP and HAL_GYROFFT_ENABLED. target appropriate ARM cpus
define hanning window and quinn's estimator
start/analyse version of FFT to support threading
allocate memory in a specific region
calculate frequency and noise bandwidth of two noisiest peaks
control inclusion of DSP based on board size
2020-02-22 11:15:37 +11:00
Peter Hall 2bd6d4674b AP_HAL: utility: add thread safe ring buffer duplicate 2020-02-12 07:05:05 +11:00
Willian Galvani 4afdff746e AP_HAL: Fix Navigator orientation
The Rev2 prototype board had the IMU rotated
2020-02-04 22:47:16 -05:00
Randy Mackay a71ae54d3a AP_HAL: add RCOutput::get_output_mode_banner 2020-02-04 12:23:33 +11:00
Andrew Tridgell 3105c6a050 AP_HAL: added pulse_input_enable() API
this allows disabling pulse input at runtime to lower CPU load on
IOMCU when decoding via a UART
2020-01-31 11:09:07 +11:00
Peter Barker 1344827c07 AP_HAL: add empty overridable trap method 2020-01-29 10:27:01 +11:00
Andrew Tridgell f683741a9c AP_HAL: make all semaphores recursive
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
2020-01-19 20:19:30 +11:00
Andrew Tridgell 629ebbb8ea AP_HAL: removed old PX4 define 2020-01-18 17:01:40 +11:00
Patrick José Pereira dc44a17c46 AP_HAL: Add navigator board
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-01-16 08:01:54 +11:00
Peter Barker f6bb94ff33 AP_HAL: add missing break statement in dsm code 2020-01-15 13:55:42 +11:00
Andrew Tridgell 4eccea2607 AP_HAL: define more UART option bits 2020-01-03 17:32:23 +11:00
Andrew Tridgell 12b6f73d83 AP_HAL: added erase() method to Storage class 2020-01-02 09:52:57 +11:00
Andy Piper 22d6fd5e1f AP_HAL: update docs for ObjectBuffer 2019-12-10 21:07:58 +11:00
Peter Barker 10c50844fd AP_HAL: stop emitting extra CR before a LF as part of our printf 2019-11-08 17:37:04 +11:00
Peter Barker 3f9a4ee5f9 AP_HAL: fix unit test compilation due to -Werror=format-truncation 2019-11-06 21:42:18 +11:00
Andrew Tridgell 29a2351fd0 AP_HAL: rename AP_HAL::CAN to AP_HAL::CANHal
avoid conflict with ChibiOS STM32F3xx headers
2019-11-01 10:53:53 +11:00
Andrew Tridgell 9a778418a5 AP_HAL: use enum for flash_bootloader() result 2019-10-25 21:36:55 +11:00
Andrew Tridgell 15d98220e0 AP_HAL: enabled SLCAN on fmuv2 and Pixhawk1-1M
this fits for now, and is needed for CAN GPS for now
2019-10-08 10:02:14 +11:00
Andrew Tridgell 53fab5767f AP_HAL: cleanup ifdefs for SLCAN enable 2019-10-08 10:02:14 +11:00
Andrew Tridgell 2d00298070 AP_HAL: added HAL_MEM_CLASS for amount of memory 2019-10-01 09:29:55 +10:00
Andrew Tridgell 81711eb28e AP_HAL: fixed build on g++ 7.3 for stm32
the system maths headers don't like our maths defines, but are happy
if we include math.h first
2019-09-28 14:19:46 +10:00
Peter Barker 5dad0e5410 AP_HAL: a few more simple tests for snprintf 2019-09-12 16:08:59 +10:00
Peter Barker 412bf24b9a AP_HAL: add gtests for snprintf 2019-09-12 07:42:40 +10:00
Peter Barker 10675ab5c4 AP_HAL: correct include ordering in srxl.h
The header needs stdint.h which it was only getting because it was
included after stdint.h in the cpp file.

Stop including standard headers before other ArduPilot headers
2019-09-11 14:19:14 +10:00
Andrew Tridgell 4197fdeb2a AP_HAL: fixed bug in vsnprintf()
we need to return the number of bytes that would have been printed if
the buffer was big enough to support use cases such as vasprintf()
which needs to know how many bytes to allocate
2019-09-11 13:41:03 +10:00
Andrew Tridgell 1cb608a9f4 AP_HAL: allow neopixel LEDs to be set more flexibly
allow for N leds per chain, with RGB control of each
2019-09-10 13:03:28 +10:00
Tom Pittenger e3416b66dc AP_HAL_ChibiOS: add Neopixel output type, similar to dshot 2019-09-10 13:03:28 +10:00
Andrew Tridgell 6983186210 AP_HAL: added get_options() method on UARTs 2019-09-06 08:51:45 +10:00
Andrew Tridgell 2bc7db4cca AP_HAL: removed old HAL_COMPASS_ defines (no longer used) 2019-09-04 16:27:47 +10:00
Andrew Tridgell 43e011c7a8 AP_HAL: convert Linux compass specification to new probe list
this avoids the special handling in AP_Compass library
2019-09-04 16:27:47 +10:00
Michael du Breuil c12652b325 AP_Rangefinder: Remove stop pin usage 2019-09-04 09:54:50 +10:00
Michael du Breuil 927a0521e3 AP_HAL: Remove the empty force_safety_no_wait 2019-09-04 07:14:50 +10:00
Andrew Tridgell 7fa6eeaaed AP_HAL: remove unused HAL_BARO_ defines 2019-08-28 06:54:11 +10:00
Andrew Tridgell 9d94598235 AP_HAL: convert linux boards to use baro probe list 2019-08-28 06:54:11 +10:00
Andrew Tridgell 60a6f1b04a AP_HAL: removed most HAL_INS_* defines
not used any more
2019-08-28 06:54:11 +10:00
Andrew Tridgell 96180018fb AP_HAL: convert HAL_Linux to use HAL_INS_PROBE_LIST
makes for much simpler addition of new boards, especially with more
than one IMU
2019-08-28 06:54:11 +10:00
Andrew Tridgell 24e05e96e7 AP_HAL: define support for LIS3MDL_I2C and RM3100_SPI 2019-08-27 10:29:56 +10:00
Michael du Breuil e47f97c5d3 AP_HAL: Fix bad buffer termination 2019-08-26 18:57:59 +01:00
Andrew Tridgell 9741ac0b64 AP_HAL: added I2C ISR count to PersistentData 2019-08-26 09:13:39 +10:00
Andrew Tridgell c5c96c76ee AP_HAL: added logging of hardware fault information in watchdog
this may help trackdown software bugs that trigger hard faults
2019-07-19 16:02:41 +10:00
murata 2e4dda5ece AP_HAL: Match output type and variable type 2019-07-16 10:11:13 +10:00