Commit Graph

2261 Commits

Author SHA1 Message Date
Randy Mackay b462bfed84 Copter: remove unused print_wp function 2013-06-02 11:32:38 +09:00
Dr Gareth Owen 4c6d6ea96e changed yaw reset to when armed to not use initial_simple_bearing 2013-06-02 11:29:30 +09:00
Dr Gareth Owen 79bd8b4fd0 rtl resets yaw to same as when armed - unless user specifies otherwise 2013-06-02 11:29:27 +09:00
Randy Mackay 0460147a15 Copter: guided mode yaw fix
Nose of copter now points at next guided point if it is more than 10m
away
2013-06-02 11:25:35 +09:00
Randy Mackay 5203ba9fe3 Copter: alt hold feed forward filter 2013-06-01 21:13:47 +09:00
Randy Mackay 99f5462a03 Copter: circle mode fixes 2013-06-01 18:21:30 +09:00
Randy Mackay e3cd494709 Copter: remove debug message 2013-06-01 18:21:30 +09:00
Randy Mackay 23ce35d292 Copter: remove unused NAV_WP_INAV #define 2013-06-01 18:21:28 +09:00
Randy Mackay 5e2fc32410 Copter: remove unused cli wp report 2013-05-31 21:04:27 +09:00
Randy Mackay 1722e438d8 Copter: pass alt hold gain to WP_Nav library 2013-05-31 21:04:10 +09:00
Randy Mackay d875e95da3 Copter: remove nav and wp tests from cli
This are more fully tested in the autotester
2013-05-31 15:23:39 +09:00
Randy Mackay ae91c4a237 Copter: alphabetise order of cli test menu 2013-05-31 15:16:06 +09:00
Randy Mackay e2495b7a49 Copter: alphabetise order of cli setup menu 2013-05-31 15:16:06 +09:00
Randy Mackay a0c8bf238e Copter: move motors test to test menu
Also allow test to be run from mission planner's cli window
2013-05-31 15:16:05 +09:00
Randy Mackay 1807840d4f Copter: fixed comments re mag field pre-arm check 2013-05-31 12:28:04 +09:00
Randy Mackay 7b50ecc73c Copter: pre-arm check for mag field length 2013-05-31 12:23:19 +09:00
Randy Mackay a1821c89e7 Copter: pre-arm check for board voltage < 5.8V 2013-05-31 11:31:27 +09:00
Randy Mackay c6e383be0f Copter: disable board voltage pre-arm check for PX4 2013-05-31 11:27:54 +09:00
Andrew Tridgell 2488c4fdc3 Copter: update docs on volt/current pin 2013-05-31 07:57:15 +10:00
Dr Gareth Owen f175111243 added GPS check before mode change. New mode_requires_gps() function. 2013-05-30 20:33:15 +09:00
Andrew Tridgell 0e31a2f582 Copter: fixed indent-tabs-mode 2013-05-30 09:55:51 +10:00
Andrew Tridgell 30df8796ce Copter: fixed loading of waypoints
copter code assumes that command_total includes the home waypoint
2013-05-29 21:44:08 +10:00
Andrew Tridgell 903d5636bb Copter: added support for partial mission load
this allows individual waypoints to be updated in missions
2013-05-29 16:25:05 +10:00
Randy Mackay c3d21a457f Copter: add pre-arm board voltage check
Copter will not arm unless board voltage is over 4.5V
2013-05-28 21:50:31 +09:00
Randy Mackay 6ecd2d74a3 Copter: beep twice during arming 2013-05-27 13:55:34 +09:00
Randy Mackay cdcf442f55 Copter: enable GPS failsafe by default 2013-05-27 11:25:37 +09:00
Randy Mackay ec7ee47099 Copter: scaling stability patch 2013-05-27 11:21:31 +09:00
Randy Mackay 838fb3f4e2 Copter: don't spin motors in ALTHOLD with zero throttle 2013-05-27 10:42:22 +09:00
Randy Mackay 4fa101292a Copter: add baro health to pre-arm checks 2013-05-25 12:24:47 +09:00
Randy Mackay d1791bab76 Copter: fix barometer cli test 2013-05-25 12:21:29 +09:00
Dr Gareth Owen 1aca66460e 7 yaw when armed option changed so overridable by user 2013-05-24 11:14:06 +09:00
Randy Mackay 967aa81e9b Copter: add XL-EZ4 to SONAR_TYPE parameter description 2013-05-23 09:46:57 +09:00
Randy Mackay 22e9b95c3c Copter: version update to 3.0.0-rc3 2013-05-22 17:46:28 +09:00
Randy Mackay 72f29bd0db Copter: remove debug message from compassmot 2013-05-22 11:30:30 +09:00
Randy Mackay c404c46e5a Copter: add Fence to CH7/CH8 param description 2013-05-21 16:31:16 +09:00
Andrew Tridgell 4508e645f1 Copter: fixed parameters to pass new script 2013-05-21 17:02:13 +10:00
Randy Mackay bb3073fab1 Copter: minor parameter description fixes 2013-05-21 15:56:09 +09:00
Randy Mackay 5ee68db6f0 TradHeli: add parameter descriptions
small formatting changes too
2013-05-21 15:33:41 +09:00
Randy Mackay 9139fb54ac Copter: param update for AP_Baro and AP_Scheduler 2013-05-21 14:22:11 +09:00
Randy Mackay 00bd1bf8ea Copter: RESETTOARMEDYAW order and comments
We should keep the order in the case statement the same as the #define
order.
2013-05-21 10:58:34 +09:00
Dr Gareth Owen f646b79e5f indent correct again 2013-05-21 10:40:36 +09:00
Dr Gareth Owen d9fc37c01c indent correct 2013-05-21 10:40:34 +09:00
Dr Gareth Owen e9d640ced8 added ch7 option to reset yaw back to what it was when quad was armed 2013-05-21 10:40:30 +09:00
Randy Mackay db552adf02 Copter: typo in LOG_BITMASK param description 2013-05-21 10:30:59 +09:00
Randy Mackay 669850e6d4 Copter: add parameter description for LOG_BITMASK
Should allow a dropdown in the GCS so it can be set more easily without
going into the cli
2013-05-21 10:29:40 +09:00
Randy Mackay bd44c2f73d Copter: all pre-arm checks to be disabled
set ARMING_CHECK parameter to zero to disable
2013-05-20 14:48:04 +09:00
Randy Mackay 43c377ca67 Copter: add compass calibration to pre-arm check 2013-05-20 14:19:47 +09:00
Randy Mackay 6efdabb104 Copter: move auto disarm into a separate function 2013-05-20 14:05:50 +09:00
Randy Mackay 1dbe98b566 Copter: display reason for pre-arm-check failures in GCS 2013-05-20 13:03:18 +09:00
Randy Mackay d10e3bc75f Copter: send_text_P bug fix for short messages 2013-05-20 12:52:20 +09:00
Randy Mackay 885ce7db03 Copter: remove DigitalReadFast
With APHal all reads are fast
2013-05-20 11:29:34 +09:00
Randy Mackay 21f3534a93 Copter: remove DigitalWriteFast
With APHal all writes are fast
2013-05-20 11:27:35 +09:00
Randy Mackay 55f1b3b2ae Copter: reorganise medium loop
Shifted compass logging to happen when compass is read.
Updated comments.
2013-05-20 11:18:51 +09:00
Randy Mackay c840e2a8c2 Copter: code clean-up move 10hz loop after 50hz loop 2013-05-20 11:05:14 +09:00
Randy Mackay f4846b417a Copter: compiler fix for disabled logs 2013-05-19 22:55:40 +09:00
Randy Mackay 4ad395e7be Copter: merge WPNAV into NTUN dataflash message 2013-05-19 22:53:35 +09:00
Randy Mackay 072f3dbe30 Copter: display interference % in compassmot 2013-05-19 22:03:48 +09:00
Randy Mackay 9fdab5e8fe Copter: remove unused AUTO_SLEW_RATE parameter 2013-05-17 16:09:17 +09:00
Randy Mackay 8c99936431 Copter: update CH7_OPT, CH8_OPT to include Multi Mode 2013-05-17 16:07:11 +09:00
Randy Mackay 38239c652a Copter: ch8 aux switch
Ch8 can be used as an aux switch like ch7.  Has all the same options as
ch7 and there is a safety check to ensure both switches aren't set to
the same function so as to avoid interfering with each other
2013-05-17 14:42:28 +09:00
Randy Mackay 566daf883a Copter: remove unused MODE bit from LOG_BITMASK
We always log the mode so no need for this bit
2013-05-17 12:26:42 +09:00
Randy Mackay 5b00ce24ed Copter: minor user hooks cleanup
Only define and call functions if the appropriate #define in
APM_Config.h has been added
2013-05-17 12:19:07 +09:00
Randy Mackay 6a173eb7ad Copter: remove unused dump_state function
Feel free to add this back in when doing debug.  Let's not have too much
debug permanently in the code because it makes it harder to read.
2013-05-17 12:11:23 +09:00
Randy Mackay 1426f40319 Copter: remove unused JDrones motor PID overrides 2013-05-17 12:05:20 +09:00
Randy Mackay 19394918dd Copter: simplify APM_Config.h
Remove items that can be more easily set with parameters
2013-05-17 12:01:39 +09:00
Randy Mackay 28c37dd798 Copter: do pre-arm checks when arming from GCS 2013-05-17 11:22:32 +09:00
Randy Mackay 9d0f40b432 Copter: add pre_arm_rc_check
Motors are not be enabled unless we have passed rc checks which include
checking the radio in calibration has been performed.
2013-05-16 16:32:00 +09:00
Randy Mackay 0540acfec9 Copter: change to compassmot instructions 2013-05-15 12:35:16 +09:00
Randy Mackay 33d1129904 Copter: remove unused TB_RATIO parameter 2013-05-14 16:56:55 +09:00
Randy Mackay e843bf3dfd Copter: bug fix for POSITION mode throttle
Was using alt-hold throttle controller instead of manual throttle
controller
2013-05-14 11:56:09 +09:00
Randy Mackay a2e298bbfc Copter: change to default RTL yaw behaviour
We will not point the nose home for RTL but will point the nose for all
other waypoints
2013-05-14 11:52:39 +09:00
Randy Mackay 319f3ef560 Copter: flexible CH6 declination tuning range 2013-05-13 23:37:30 +09:00
Randy Mackay 6ba9431be4 Copter: update firmware version and release notes ahead of -rc2 2013-05-13 22:16:25 +09:00
Randy Mackay e130c8041c Copter: remove unused event definitions 2013-05-13 18:07:44 +09:00
Randy Mackay bd6edecdec Copter: restore logging of arm/disarm event 2013-05-13 18:07:28 +09:00
Randy Mackay 94a05a9285 Merge branch 'master' of https://github.com/diydrones/ardupilot 2013-05-13 18:01:53 +09:00
Randy Mackay bb7aec2600 Copter: log compass failur to dataflash 2013-05-13 18:01:30 +09:00
Andrew Tridgell c44fd42349 Copter: fixed RSSI reading on PX4
needed for different analog input scaling
2013-05-13 15:19:05 +10:00
Randy Mackay 429f900460 Copter: bug fix for RTL bearing
Also smooth RTL's initial climb stage by projecting stopping point
2013-05-11 16:21:25 +09:00
Randy Mackay ad656c7e8a Copter: allow lat/lon to be specified for land 2013-05-10 22:37:15 +09:00
Randy Mackay b3bca271d4 Copter: rename verify_must to verify_nav_command
Perhaps easier to understand if we use the "nav" and "conditional"
command labels
2013-05-10 12:06:29 +09:00
Randy Mackay b65d714675 Copter: set yaw-mode in do_loiter mission command 2013-05-10 10:51:46 +09:00
Randy Mackay 98732ae4e8 Copter: remove redundant init of controllers when auto is started
individual do_* commands are responsible for setting roll-pitch, yaw and
throttle modes.  Removing this redundant setting of the controllers
removes the short period (10th second max) where loiter and waypoint
controller's desired roll and pitch were used even before the
controllers have been run once.
2013-05-10 10:51:13 +09:00
Randy Mackay 870b9b0fbb Copter: only run nav controllers when auto-armed
This stops run-up in target position and nav controller I terms ahead of
throttle being raised
2013-05-10 10:46:17 +09:00
Randy Mackay 1b52ee211a Copter: bug fix for RTL yaw control
Nose was only pointing home if your initial altitude was above the
RTL_ALT
2013-05-09 21:44:46 +09:00
Randy Mackay ed5ddfd9db WPNav: initialise desired roll, pitch
bug-fix to resolve 1/10th second twitch when loiter or waypoint
controller are first engaged
2013-05-09 18:32:02 +09:00
Randy Mackay d0fb332e9f Copter: init_rc_out in cli's compassmot setup
Bug fix to allow cli's compass motor compensation to be run from the
mission planner's terminal window
2013-05-09 13:30:08 +09:00
Andrew Tridgell 95120ed43d Copter: use library gcs_severity 2013-05-09 09:28:49 +10:00
Randy Mackay 1b2d8636ca Copter: set wp to "fast" if they have no delay 2013-05-09 00:18:36 +09:00
Randy Mackay 9824f6c223 Copter: add flight mode strings to Parameter info 2013-05-08 16:41:45 +09:00
Randy Mackay 0a148cce19 Copter: log target alt in meters 2013-05-08 16:41:16 +09:00
Andrew Tridgell 9feb46c834 Copter: use new accel cal interact over MAVLink 2013-05-08 16:19:26 +10:00
Randy Mackay 324200b52c Copter: disable centrifugal correction when disarmed 2013-05-06 15:32:08 +09:00
Andrew Tridgell 703a1ba438 Copter: avoid copying the DCM matrix 2013-05-05 21:51:09 +10:00
Randy Mackay 372ebb602c Copter: disable centrifugal force correction when disarmed 2013-05-05 16:55:06 +09:00
Randy Mackay ae2ad8e819 Copter: remove unused radius_of_earth constant 2013-05-05 13:13:48 +09:00
Randy Mackay 6836964e3c Copter: resolve compiler warning re fence 2013-05-04 23:18:16 +09:00
Randy Mackay 1cfd5900a8 Copter: add support for H-quad frame
H-quads are like X quads but the motors spin in the opposite direction.
Having the motors reversed seems to help with yaw authority because of
the slight flex in bodies
2013-05-03 23:13:40 +09:00
Randy Mackay 647a93e78e Copter: remove jerk when entering RTL or AUTO
Loiter target position was not being initialised properly.
Add a few more comments
2013-05-03 16:58:00 +09:00
Randy Mackay cca05ee8ae Copter: start dataflash logging when arming
Stop nearly empty logs from being produced.
Removed redundant armed bit from ap state.
2013-05-03 14:49:55 +09:00