Commit Graph

1458 Commits

Author SHA1 Message Date
Craig Elder f1934c6db2 Initial Commit 2014-09-09 00:02:17 -07:00
Craig Elder df82e0accc Frame_Params: Added 3DR Iris+ 2014-09-08 12:40:10 -07:00
Craig Elder a57818dfc8 Frame_parameters: Updated Iris with 3 Position Mode Switch 2014-09-04 11:49:02 -07:00
Craig Elder 21e4144b29 Frame_params: Updated Iris with 3 Position Mode Switch 2014-09-03 16:47:18 -07:00
Andrew Tridgell 78c12ca9dd autotest: added skid steering support for rover in sim_vehicle.sh 2014-08-29 06:59:32 +10:00
Andrew Tridgell e836d1aa2b autotest: added CMAC_South
used to simulate takeoff to the south
2014-08-28 11:22:40 +10:00
Kevin Hester 81bd4c0b4c LogAnalyzer: If skipping badlines, ignore parse errors 2014-08-26 15:36:56 +09:00
Kevin Hester 5cb242f5a4 LogAnalyzer: Report missing parameters as test failures 2014-08-26 15:36:53 +09:00
Kevin Hester 332ab9bc1b LogAnalyzer: convert tabs to spaces (only) per coding conventions 2014-08-26 15:36:50 +09:00
Randy Mackay 68be36d4f8 AutoTest: reduce copter throttle when flying square
This will keep the copter lower during this test and resolve the timeout
during landing
2014-08-26 12:19:58 +09:00
Eric Liao e34b0847d7 3dr Berkeley moved - updated coords 2014-08-25 16:17:54 +09:00
Craig Elder 0ab3e40e92 Frame Parameters: Updated Mode Switch order 2014-08-21 13:34:42 -07:00
Andrew Tridgell e629a8d67a Linux: added example startup script for plane 2014-08-19 20:03:33 +10:00
bugobliterator 5e03df2d9a Tools:HAL_Linux_Essentials: store pin status during pulse instead of status after pulse 2014-08-19 10:08:16 +10:00
bugobliterator 210d3e8c32 Tools:HAL_Linux_Essentials:add rcinput test code
the test code performs continuous reads from ring buffer shared with PRU0
2014-08-19 10:08:16 +10:00
bugobliterator d8e36fee41 Tools:HAL_Linux_Essentials: Add PRU side of code for RCinput to run on PRU0
PRU0 with rcinpru0 firmware will be timing pin state changes and loading it inside ring buffer maintained inside SHARED_RAM at 0x12000 offset
2014-08-19 10:08:16 +10:00
Victor Mayoral Vilches 04a8377462 Tools: Change sensor configurations easily.
This shell script allows to change the sensor configuration
(for now just supports IMU changes) so that the autopilot is
compiled for different combinations of sensors. This has probed
to be useful with Linux-based boards (e.g.: PXF, Erle-board)
that include serveral, different sensors for each kind.
2014-08-19 10:08:16 +10:00
Craig Elder 27a7ea2766 Frame Parameters: 3DR Aero RTF 2014-08-18 15:33:34 -07:00
Randy Mackay 946de4f644 Tools: build antenna tracker binary 2014-08-18 13:00:16 +09:00
Craig Elder b0d26d9ace * Frame Parameters: 3DR AERO RTF
Updated RLL2SRV_P parameter
2014-08-15 12:18:49 -07:00
Craig Elder 926d57698d Frame Parameters: 3DR AERO RTF
Updated 3DR AERO RTF parameters
2014-08-14 18:37:29 -07:00
Andrew Tridgell e66243f72e autotest: add AntennaTracker autodoc to autotest.diydrones.com/Parameters 2014-08-15 06:42:07 +10:00
Randy Mackay 8925c61ae4 Tools: build antenna tracker for firmware.diydrones.com 2014-08-14 20:56:09 +10:00
Randy Mackay a0468db064 AutoTest: update sim_vehicle for antenna move 2014-08-14 20:56:07 +10:00
Randy Mackay db9750ee7a Tools: update build script for Antenna move 2014-08-14 20:56:03 +10:00
Randy Mackay eb4eca8550 Antenna: move up one directory 2014-08-14 20:56:00 +10:00
Andrew Tridgell caeb2c4d0d autotest: raise timeout to 7000 seconds 2014-08-14 14:29:16 +10:00
Andrew Tridgell 1f7305f516 autotest: support starting with HIL for plane 2014-08-13 21:35:26 +10:00
Andrew Tridgell ea889e2e00 Replay: fixed build 2014-08-13 18:46:44 +10:00
Andrew Tridgell 2918b04f17 CPUInfo: fixed build 2014-08-13 18:46:44 +10:00
Andrew Tridgell 65614da10b VARTest: convert to using StorageManager 2014-08-13 18:46:44 +10:00
Andrew Tridgell cbcb5ec0a9 AntennaTracker: convert to using StorageManager 2014-08-13 18:46:44 +10:00
labtoast dfc9470e01 SITL: added missing parameters to sim_multicopter.py call 2014-08-11 11:22:16 +10:00
Andrew Tridgell 5bf69d4ab3 VARTest: fixed build 2014-08-10 22:36:10 +10:00
Andrew Tridgell 72d35e8da4 CPUInfo: fixed build 2014-08-10 22:36:03 +10:00
Andrew Tridgell 35b0692fd5 Replay: fixed build 2014-08-10 21:25:16 +10:00
Andrew Tridgell 56f7d9285f autotest: added -N option to sim_vehicle.sh
useful for unusual builds
2014-08-09 22:50:15 +10:00
Andrew Chapman 50f9b4d4bb LogAnalyzer: added help text for --format option 2014-08-06 19:51:30 -07:00
Kevin Hester 097a3b23e6 LogAnalyzer: Fix handling of the -f format option (bin, log, auto)
Previously this option was ignored.
2014-08-06 19:51:29 -07:00
JD Russo 86baccffbd common.py: Removed timeout reset in wait_altitude
common.py:wait_altitude contained an if statement that, if the plane was changing altitude at all would reset tstart, making the timeout effectively useless. Removing this line allows wait_altitude to respect the timeout the user sets.
2014-08-07 12:40:34 +10:00
JD Russo dd93c6e0ca autotest_jenkins.py: Fixed spelling of prerequisites
Same change as in autotest.py, just correcting the spelling of 'prerequisites' in a couple places from the original misspelled 'prerequesites'
2014-08-06 19:12:02 -07:00
JD Russo 23dc2db036 autotest.py: changed 'prerequesites' to correct spelling
In a few places in autotest, the word 'prerequisites' was misspelled as 'prerequesites'. This is just a simple commit to fix that spelling.
2014-08-06 19:12:01 -07:00
Andrew Tridgell b89988b2df Replay: fixed build 2014-08-06 22:27:50 +10:00
Andrew Tridgell 23fb34c96d AntennaTracker: fixed build 2014-08-06 19:01:19 +10:00
Andrew Tridgell 7b8287793c CPUInfo: fixed build 2014-08-06 18:56:39 +10:00
Andrew Tridgell d6ee11db6e VARTest: fixed build 2014-08-06 17:59:20 +10:00
Andrew Tridgell 06c3a0e96c autotest: fixed tracker sim for non-onoff mode 2014-08-03 18:16:50 +10:00
Andrew Tridgell 671708d11d AntennaTracker: added YAW_TRIM and PITCH_TRIM 2014-08-03 18:16:37 +10:00
Andrew Tridgell 02e173b094 AntennaTracker: do an initial pressure calibration on startup 2014-08-03 17:38:19 +10:00
Craig Elder 7d152cbbf2 Frame_params: Added Iris with 3 Positon Mode Switch.param 2014-07-29 17:27:37 -07:00
Randy Mackay 61506c52dc Replay: fix example sketch 2014-07-29 15:26:05 +09:00
Andrew Tridgell 1aeac23f46 AntennaTracker: avoid integer underflow in mavlink txspace check 2014-07-27 22:18:52 +10:00
Andrew Tridgell a60590d1fe autotest: use run_in_terminal.sh for HIL 2014-07-27 22:12:08 +10:00
Andrew Tridgell 1ea1d9983d build: don't build examples for apm1 any more
so little APM1 development happening it is not worth it
2014-07-25 21:03:23 +10:00
Andrew Tridgell 95b62512f8 AntennaTracker: fixed build 2014-07-25 21:01:09 +10:00
Andrew Tridgell 9c69e736f1 CPUInfo: fixed build 2014-07-25 18:41:30 +10:00
Andrew Tridgell 0b6c5a6505 VARTest: fixed build 2014-07-25 17:17:34 +10:00
Andrew Tridgell 2ddfaa60b9 Replay: fixed build 2014-07-25 17:15:29 +10:00
bugobliterator 6b619562b5 Tools: Remove unrequired pru0 pin setups from BB-PXF-01-00A0 overlay 2014-07-25 15:29:29 +10:00
bugobliterator fdf916025a Tools: add unified device tree overlay to load all requisites
no more loading multiple capes to enable pru, spi, pwm etc. Steps to load the cape during boot also added.
2014-07-25 15:29:27 +10:00
akdslr 8ea64e62f8 VARTest: Removed CONFIG_SONAR_SOURCE and SONAR_SOURCE_ANALOG_PIN since no longer used 2014-07-24 14:41:55 +10:00
Andrew Tridgell 75e8157b4e AntennaTracker: support on/off servos
these servos are either moving at a constant rate, or off. To really
move them accurately we need to know about this and not use a PID.

This doesn't yet support ballerina, but could do with a bit more work.
2014-07-23 18:41:34 +10:00
Andrew Tridgell 8ea098ad21 autotest: support antenna trackers with on/off servos in SITL 2014-07-23 18:41:34 +10:00
Andrew Tridgell 0dcd0e600b Tools: remove unused Linux device tree files 2014-07-19 14:48:43 +10:00
Andrew Tridgell 4e7e69bafb Tools: added dtbo for PXF cape 2014-07-19 13:58:31 +10:00
Andrew Tridgell 183795df02 Tools: fixed DTS Makefile 2014-07-19 13:26:47 +10:00
Andrew Tridgell ad532b89bd Tools: new dts file for SPI on PXF cape 2014-07-19 13:22:09 +10:00
Andrew Tridgell 6848746219 Tools: rename a file with a space in it
spaces in filenames play havoc with unix tools
2014-07-19 12:21:05 +10:00
nwind21 485726258b autotest: Add code to detect if a hard link is not allowed (for VM's). 2014-07-15 12:22:48 +10:00
Markus Koetter e06b3f3ff6 Travis-CI: add vrubrain-v51 target (Copter) 2014-07-15 11:50:09 +10:00
Arthur Benemann ff11b13f9c tools: In install-prereqs-ubuntu.sh add support for relative paths
Install the required projects (PX4*) in the same folder from where the script is called.
Install the arm toolchain at /opt
2014-07-15 11:47:01 +10:00
Arthur Benemann b76b090acd tools: Make install-prereqs-ubuntu.sh work with newer versions of Ubuntu
* Install libraries for 64bit Ubuntu systems.
* Less noise apt-get output
* Install packages required for SITL simulation
* Install pymavlink, MAVProxy and droneapi
* Remove modemmanager package
* Add autotest/ to the path
2014-07-15 11:46:58 +10:00
Randy Mackay ba25f051e7 AutoTest: reduce fence radius to 150m for testing 2014-07-14 11:25:30 +09:00
bugobliterator 003806fcc1 HAL_Linux: pwmpru,HAL_Linux_RCOut code doesn't wait for magic flag to send data
change pwmpru code to remove frequent wrong PWM outputs
Replace pru firmware with new modified pru firmware
2014-07-14 09:44:37 +10:00
Andrew Tridgell 9ebc95b6fd AntennaTracker: converted to new HAL sensor setup 2014-07-14 09:44:36 +10:00
Andrew Tridgell e2822a2d8f Tools: added Makefile for BBB overlays 2014-07-14 09:44:35 +10:00
Víctor Mayoral Vilches 7cb547272b Linux_HAL_Essentials: Minor type fixed in the README 2014-07-14 09:44:33 +10:00
Víctor Mayoral Vilches 464cb8fed9 Linux_HAL_Essentials: Update README for Ubuntu.
Added a note pointing out the instructions for precise.
2014-07-14 09:44:33 +10:00
Siddharth Bharat Purohit 9c33420aab HAL_Linux: Linux HAL Readme:change firmware name to pwmpru1 2014-07-14 09:32:29 +10:00
bugobliterator aa1db00908 Linux_HAL_Essentials: cleanup PWM PRU code
change firmware name to pwmpru1
2014-07-14 09:32:29 +10:00
Siddharth Bharat Purohit e438250068 Linux: Startup script:add reloading pru firmware option 2014-07-14 09:32:29 +10:00
Siddharth Bharat Purohit 1956c68e16 Linux: Add usage steps for PRU firmware to Readme 2014-07-14 09:32:29 +10:00
bugobliterator 971967be4b Linux: add PRU PWM code to Linux_HAL_Essentials 2014-07-14 09:32:29 +10:00
Andrew Tridgell d79877792f Linux_HAL: updated binary dtbo files 2014-07-14 09:32:29 +10:00
Andrew Tridgell cd98593280 Linux_HAL: added dts files for overlays
These are the BBB/PXF specific DTS files, fixed for the SPI pin handling
2014-07-14 09:32:29 +10:00
bugobliterator 5bcdb039e2 HAL_Linux: Make asynchronous PRU write and reduce the size of data exchange
Change to sending Total Period and hi Period, rather than Hi and Lo Period
Change PRU firmware accordingly
2014-07-14 09:32:29 +10:00
bugobliterator 73d42f3e33 Linux: Add initialising script and required overlays and firmware 2014-07-14 09:31:49 +10:00
Víctor Mayoral Vilches 283beba4bb Tools: Add PXF enable and check CS scripts 2014-07-14 09:29:36 +10:00
Andrew Tridgell e96ab86eab build: fixed directory handling in build_binaries.sh 2014-07-14 08:13:28 +10:00
Andrew Tridgell 35e905d003 build: added some debug 2014-07-13 21:19:29 +10:00
Andrew Tridgell 527de3f2e4 AntennaTracker: changes for more common mavlink code 2014-07-13 15:37:50 +10:00
Andrew Tridgell 4fad9b0a89 Replay: fixed build of replay tool
changes to compass API
2014-07-12 11:08:04 +10:00
Andrew Tridgell 20accefe51 VARTest: fixed build with compass changes 2014-07-12 10:22:25 +10:00
Aaron Curtis 179d854a26 LogAnalyzer: Update to include the new "format" argument, and fix scoping on two new tests. 2014-07-08 14:13:00 -07:00
Aaron Curtis 406fedf727 LogAnalyzer: Allow instantiation of DataFlashlog with no input filename, for backward compatibility. My changes make m_dflog=DataFlashlog('/path/to/file.log') work, which seems like the preferable way, but we don't want to break backwards compatibility. 2014-07-08 14:12:59 -07:00
Aaron Curtis 0f5360fefa LogAnalyzer: Default to automatic log format detection. 2014-07-08 14:12:58 -07:00
Aaron Curtis c6d783409c LogAnalyzer: There is no self.logfile, so this must be self.filename. 2014-07-08 14:12:58 -07:00
Aaron Curtis fc79a06b9f LogAnalyzer: Fix indent which I broke when merging. 2014-07-08 14:12:57 -07:00
Aaron Curtis 9dbfa40afd LogAnalyzer: LogAnalyzer: make all subclasses of Test call their parent __init()__ function when overriding that function. This is the way of Python. 2014-07-08 14:12:56 -07:00
Aaron Curtis f0cf612372 LogAnalyzer: Fix scoping in LogAnalyzer.py . Tests still need fixing.
Conflicts:
	Tools/LogAnalyzer/LogAnalyzer.py
2014-07-08 14:12:56 -07:00