Randy Mackay
5e0ddd299f
Copter: disable OPTFLOW for SITL
2014-01-13 17:11:27 +09:00
Randy Mackay
61f319ce38
Copter: disable OPTFLOW for PX4/Pixhawk
2014-01-13 12:02:03 +09:00
Randy Mackay
b3d20bb8aa
TradHeli: Drift mode to use heli manual throttle
2014-01-10 11:06:06 +09:00
Robert Lefebvre
8b36c59d8b
TradHeli: rename Stab_Col parameters
...
With H_ prefix they appear with the rest of the tradheli specific params in the parameter list.
2014-01-10 10:51:48 +09:00
Robert Lefebvre
794890884c
TradHeli: enable Landing Collective when we are not moving
...
This prevents full negative pitch when touching down in Alt Hold or Auto-Landing.
2014-01-10 10:50:58 +09:00
Robert Lefebvre
531a9f4f25
TradHeli: disable AutoTune for Tradheli compile
...
We need the flash space, and this probably won't work for tradheli anyway since tradheli needs most of the control from Feedforward rather than P term. And D-term is very very bad.
2014-01-10 10:50:09 +09:00
Randy Mackay
9f2f44f0f6
Copter: integrate shrunken optflow
2014-01-09 12:31:53 +09:00
Randy Mackay
1793ee804e
Copter: remove armed check before logging
2014-01-07 22:43:49 +09:00
Randy Mackay
84881470b1
Copter: suspend logging while disarmed
2014-01-07 22:43:47 +09:00
Michael Oborne
757dd228d2
Copter: BugFix DO_SET_ROI returns Lat,Lon,Alt to GCS
2014-01-03 16:14:44 +09:00
Randy Mackay
99f851fc87
Copter: bugfix for starting in LOITER
...
Loiter's Roll-Pitch mode was not being set on start-up.
2013-12-30 17:18:10 +09:00
Andrew Tridgell
7c39d867bb
Copter: use file based logs in SITL
2013-12-29 07:14:21 +11:00
Andrew Tridgell
97df2f64c9
Copter: use common available_memory()
2013-12-28 16:02:32 +11:00
Randy Mackay
02898cb46e
Copter: replace APM with board in cli
2013-12-28 10:42:10 +09:00
Kevin Hester
2044300057
Copter: Split out prearm failures of low HDOP separately from !gps lock
...
(on the iris list there was some confusion on why the copter was blinking
yellow but yet they had gps lock)
2013-12-26 10:10:06 +09:00
Randy Mackay
ab1bb6886c
Copter: remove reference to COPTER_LEDS
2013-12-19 16:19:48 +09:00
Randy Mackay
d362bb45fd
Copter: move sensor init from setup(to init_ardupilot
...
This fixes a bug in which the external led was not being disabled if the
EPM was enabled (they share pins). The cause of the problem was the EPM
was being initialised before it's parameters had been loaded
2013-12-19 14:12:19 +09:00
Lukasz
cb17a5bdb6
Copter: Add RSSI_RANGE parameter
...
Added ability to rescale rssi input voltage. Useful for receivers like
FrSky which have 3.3V output.
2013-12-17 22:38:39 +09:00
Randy Mackay
21cda96f67
Copter: EPM enable/disable to APM_Config.h
2013-12-17 15:36:44 +09:00
ctech4285
2b5d8aa5b7
Copter: integrate EPM library
2013-12-17 15:36:42 +09:00
Andrew Tridgell
7f100ebe31
Copter: removed common functions
2013-12-17 12:00:46 +11:00
Andrew Tridgell
edda76623f
Copter: updates for DataFlash API changes
2013-12-17 11:51:36 +11:00
Andrew Tridgell
dd749c1de3
Copter: when using file logs use "logs" directory
2013-12-17 11:51:36 +11:00
Andrew Tridgell
7642208c1a
Copter: support MAVLink log download
2013-12-17 11:51:36 +11:00
Andrew Tridgell
9716e80e21
Copter: moved ap_message into GCS.h
2013-12-17 11:51:35 +11:00
Andrew Tridgell
eb2cb0abe0
Copter: moved GCS.h to common library
2013-12-17 11:51:34 +11:00
Andrew Tridgell
e5f098c37c
Copter: removed some unnecessary fields in GCS.h
...
save some memory
2013-12-17 11:51:34 +11:00
Randy Mackay
c7dc351609
Copter: remove unnecessary MPU6K filter definition
...
This should also help kick off the AC3.1 rebuild
2013-12-15 11:01:31 +09:00
Randy Mackay
b42a34cae0
Copter: 3.1 release notes
2013-12-14 17:08:38 +09:00
Randy Mackay
2a61053634
Copter: reduce default logging for SITL
2013-12-12 22:19:12 +09:00
Andrew Tridgell
28d98414e7
Copter: fixed some build warnings
2013-12-11 10:21:20 +11:00
Andrew Tridgell
5802d7f86b
Copter: added logging of 2nd compass
2013-12-10 13:35:04 +11:00
Andrew Tridgell
cc3ee2ec0c
Copter: added dual compass logging when available
2013-12-10 13:31:42 +11:00
Andrew Tridgell
d265e54043
Copter: changes for compass healthy API
2013-12-09 17:47:22 +11:00
Andrew Tridgell
f8e0f5c4f1
Copter: report both sets of sensors in MAVLink
2013-12-09 17:34:07 +11:00
Andrew Tridgell
f37a2c979d
Copter: don't need Log_Write_IMU2() now
2013-12-09 17:34:07 +11:00
Andrew Tridgell
ffdcb715c3
Copter: updates for compass API change
2013-12-09 17:34:06 +11:00
Andrew Tridgell
0cacc7eaeb
Copter: log both primary and secondary INS samples
2013-12-09 17:34:06 +11:00
Randy Mackay
145a8ed128
Copter: reduce autotune min rate D to 0.002
2013-12-09 14:17:31 +09:00
Randy Mackay
450e9e83c3
Copter: AC3.1-rc8 release notes
2013-12-09 12:02:28 +09:00
Randy Mackay
eb938c6ac0
Copter: reduce autotune min rate P to 0.01 (was 0.02)
2013-12-08 11:26:49 +09:00
Randy Mackay
f8165c2864
Copter: ignore yaw input during radio failsafe
2013-12-06 13:50:07 +09:00
Randy Mackay
4b3aff3f91
Copter: log flight mode to dataflash on start-up
2013-12-06 12:58:23 +09:00
Randy Mackay
cf0547e854
Copter: remove AN0~AN15 pin definitions
2013-12-06 10:28:28 +09:00
Randy Mackay
58788d2934
Copter: increasd default logging for PX4, Pixhawk
2013-12-05 16:04:52 +09:00
Randy Mackay
c5746e5434
Copter: update THR_MAX @Range and comments
2013-12-04 10:59:15 +09:00
Randy Mackay
2ba233942d
Copter: pre arm mag offset limit to 600 for PX4
2013-12-03 23:23:26 +09:00
Ben Nizette
58735ac1aa
Copter: Use AHRS heading in GLOBAL_POSITION_INT message
...
The definition of the heading field for GLOBAL_POSITION_INT is the
compass heading, and so it is used for Plane and Rover. Copter
however uses the GPS course over ground in this field.
My personal beef with this is simply that the mapping display in
MAVProxy is wrong for Copter. The question is: Do any GCS currently
rely on this field for GPS course rather than getting it from
GPS_RAW_INT as they should?
2013-12-03 20:30:02 +09:00
Randy Mackay
8fcbb7e59b
Copter: OF_Loiter update control_roll and pitch
2013-12-02 11:58:59 +09:00
Randy Mackay
9d92e46198
Copter: correct optflow logging
2013-12-02 11:58:28 +09:00
Randy Mackay
0cda3c9a71
Copter: reduce SONAR_GAIN to 0.8 (was 2.0)
2013-12-01 16:25:47 +09:00
Randy Mackay
ec65fd136d
Copter: enable external leds
2013-11-30 22:54:13 +09:00
Randy Mackay
e978a710cc
Copter: remove PIEZO_PIN definition
2013-11-30 18:21:01 +09:00
Robert Lefebvre
dbbe0f960a
Copter: remove LED_ON/OFF defines
2013-11-30 18:20:58 +09:00
Randy Mackay
59cea4b88c
Copter: remove CopterLED from main code
2013-11-30 18:20:55 +09:00
Randy Mackay
49ac1a48a5
Copter: Drift updates control_roll, pitch
...
control_roll, pitch should always hold desired roll and pitch angles now
that we have the RCIN dataflash message for recording pilot's input
2013-11-30 18:06:56 +09:00
Randy Mackay
a3be25750f
Copter: allow override of DRIFT_SPEEDGAIN
2013-11-30 15:35:59 +09:00
Randy Mackay
f12f0a6abe
Copter: drift file format fixes
...
tab replaced with four spaces
2013-11-30 15:29:26 +09:00
Randy Mackay
a744658b47
Copter: combine nav_roll and control_roll
...
Control_roll, control_pitch now always hold the desired lean angle
whether it be from the pilot or autopilot.
2013-11-27 23:11:30 +09:00
Randy Mackay
d7c636b4aa
Copter: remove yaw_in from ATT dataflash msg
2013-11-27 22:59:31 +09:00
Randy Mackay
f08cc010ea
Copter: firmware to ArduCopter V3.2-dev
2013-11-27 22:50:12 +09:00
Randy Mackay
7ef04bb73b
Copter: rename nav_yaw to control_yaw
2013-11-27 22:48:20 +09:00
Randy Mackay
a8929cd746
Copter: more complete RC output reporting to GCS
...
Radio outputs are pulled from hal.rcout instead of from motors library
which provides more complete reporting because it includes output from
sources like the camera and mount libraries.
2013-11-27 20:31:21 +09:00
Randy Mackay
10d6a9a34e
Copter: replace Log_Write_Motors with Log_Write_RCOU
2013-11-27 20:18:18 +09:00
Randy Mackay
af657d58b9
Copter: RCIN dataflash logging
2013-11-27 16:46:25 +09:00
Randy Mackay
7ae3014c14
Copter: parameter @Units to Percent*10
2013-11-26 22:35:11 +09:00
Randy Mackay
14b3547830
Copter: rename some parameter Display Names
...
Also move some parameter descriptions to @User Advanced
2013-11-26 22:17:02 +09:00
Randy Mackay
c32d77c626
Copter: fix @Group for SingleCopter
2013-11-26 21:50:29 +09:00
Andrew Tridgell
9c812d5028
Copter: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD
2013-11-26 13:05:32 +11:00
Andrew Tridgell
49062d8a37
Copter: removed extra features of copter telemetry merge
2013-11-26 13:05:32 +11:00
Andrew Tridgell
a49710f20e
Copter: added uartD support
...
this also brings GCS_Mavlink.pde closer to the plane implementation
2013-11-26 13:05:32 +11:00
Andrew Tridgell
21eac34cd1
Copter: log system ID if available
2013-11-26 13:00:03 +11:00
Randy Mackay
ed9f369492
Copter: shorten g.arming_check_enabled variable
...
g.arming_check_enabled shortened to g.arming_check
2013-11-25 17:23:39 +09:00
Randy Mackay
1645748e43
Copter: update @Range for Rate PIDs and Sonar
...
This will reduce false positives in DroneShare's tlog analyser
2013-11-25 12:52:37 +09:00
Randy Mackay
b8bfe008e1
Copter: run GPS glitch detection even when not armed
2013-11-22 21:46:32 +09:00
Randy Mackay
4e6d41bc8e
Copter: remove unused gps_fix_count
2013-11-22 11:53:50 +09:00
Randy Mackay
fe6ad3579c
Copter: log GPS messages even when no fix
2013-11-22 11:51:48 +09:00
Randy Mackay
667c3ecbf8
Copter: commit to kick-off auto rebuild for -rc7 release
2013-11-22 10:34:35 +09:00
Randy Mackay
96fdc129b1
Copter: update -rc7 release notes
2013-11-22 09:55:23 +09:00
Randy Mackay
8eb46ced53
Copter: revert pre-arm check for slow GPS
2013-11-22 09:53:21 +09:00
Randy Mackay
1a0f80ee64
Copter: AC3.1-rc7 version and release notes
2013-11-21 17:30:08 +09:00
Randy Mackay
0bc505514a
Copter: pre-arm check that INAV has no errors
2013-11-21 17:02:07 +09:00
Randy Mackay
965af43121
Copter: add INAV error count to PM dataflash msg
2013-11-21 17:02:04 +09:00
Randy Mackay
0219c85ee3
Copter: increase min LAND_SPEED to 30cm/s
2013-11-19 16:46:16 +09:00
Randy Mackay
e6a2940718
Copter: prefix SingleCopter's MOT param description
...
This should allow single copter's MOT_ parameter descriptions to be more
easily recognised as belonging to SingleCopter when viewed on the wiki's
arducopter-parameters page
2013-11-19 13:38:17 +09:00
Randy Mackay
b47cd6d5be
Copter: fix SingleCopter motor parameters link
2013-11-19 13:25:53 +09:00
Randy Mackay
7a2f49f7da
Copter: arming check for gps if GPS FS set to LAND_EVEN_STABILIZE
...
Setting the GPS Failsafe to LAND_EVEN_STABILIZE means the copter will
LAND if it loses GPS even if it's in a manual flight mode like
Stabilize. With this setting it makes sense to check the GPS quality
before arming even if we're in stabilize mode.
2013-11-18 23:59:26 +09:00
Randy Mackay
24dc4391bb
Copter: display pre-arm check failure reason every 30sec
2013-11-18 17:20:39 +09:00
Randy Mackay
d003334b75
Copter: pre-arm check for ACRO_BAL_ROLL and PITCH
2013-11-18 16:38:05 +09:00
Randy Mackay
9ee308efd5
Copter: auto disarm in Loiter, AltHold after 15sec
2013-11-18 16:13:15 +09:00
Randy Mackay
699a5bd381
Copter: radio, batt failsafe disarm if copter is landed in Loiter or AltHold
2013-11-18 15:51:17 +09:00
Randy Mackay
7dd4ab835f
Copter: CURR dataflash msg to output throttle_out
...
Previously it was outputting throttle-in which is not as useful in
autonomous modes
2013-11-18 13:30:48 +09:00
Randy Mackay
1359a8fea5
Copter: log INS errors in PM message
2013-11-18 12:16:21 +09:00
Randy Mackay
e32e83f2f0
Copter: commit to kick off MP rebuild
...
Required to push back MP Beta Firmwares version to AC3.1-rc5
2013-11-17 00:56:46 +09:00
Randy Mackay
cf21774cf4
Copter: update AC3.1-rc6 release notes again
2013-11-16 17:14:41 +09:00
Randy Mackay
9485363c53
TradHeli: dynamic flight speed minimum to 5m/s
2013-11-16 16:58:14 +09:00
Randy Mackay
a98fb174c4
Copter: batt failsafe triggers RTL from AUTO
2013-11-16 14:55:49 +09:00
Randy Mackay
fd60285121
Copter: update AC3.1-rc6 release notes
2013-11-16 14:49:03 +09:00
Randy Mackay
87127f0ab8
Copter: allow battery failsafe to trigger RTL
2013-11-16 14:46:57 +09:00
Randy Mackay
a812ef4660
Copter: minor comment update for set_mode
2013-11-16 13:56:15 +09:00