Leonard Hall
3e8563dd8b
Copter: ch6 tuning definition for yaw min headroom
2015-03-03 15:48:17 +09:00
Andrew Tridgell
74ef1b8d2f
Copter: removed HomeState from defines.h
...
now in AP_Common.h
2015-02-21 10:14:32 +11:00
Randy Mackay
e081b9d1c7
Copter: home is set becomes three state
2015-02-12 15:00:50 +09:00
Randy Mackay
34503de18e
Copter: integrate SerialManager
...
Remove serial0, serial1 baud and protocol parameters
Pass serial_manager to GCS, GPS, mount, FrSky_telem objects during init
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
2015-01-29 14:05:14 +11:00
Robert Lefebvre
4b86a4aeec
Arducopter: Change mode logging to use common-vehicle DataFlash library.
2015-01-21 14:37:20 +09:00
Robert Lefebvre
422970a1b1
Arducopter: Change compass logging to use common-vehicle DataFlash library.
2015-01-21 14:37:16 +09:00
Robert Lefebvre
1b152cf2bf
ArduCopter: Change Current logging to use common-vehicle logging in DataFlash library.
2015-01-21 14:37:04 +09:00
Robert Lefebvre
c9d5b6aa7f
Arducopter: Change Attitude logging to use common-vehicle logging in DataFlash library.
2015-01-21 14:36:59 +09:00
Randy Mackay
80f59694d0
Copter: remove deprecated Guided-Spline
...
Guided-Spline has been replaced by Guided-PosVel
2015-01-07 14:03:50 +09:00
Jonathan Challinger
bc29008233
Copter: add guided_posvel
2015-01-07 14:02:21 +09:00
Robert Lefebvre
e10e020062
Copter: Add Landing Gear functionality to main code
2015-01-07 11:58:16 +09:00
Randy Mackay
67fdfffc2a
Copter: remove OF_Loiter PIDs and tuning
2014-12-08 14:58:18 +09:00
Jonathan Challinger
387f3276cb
Copter: handle SET_POSITION_TARGET mavlink messages
2014-11-17 14:38:55 -08:00
Jonathan Challinger
1b1327dc93
Copter: add Guided_Spline mode
2014-11-17 14:38:48 -08:00
Jonathan Challinger
80ba40d149
Copter: CPU failsafe logs an error
2014-11-08 11:27:16 +09:00
Jonathan Challinger
d7d8330303
Copter: loiter copter without accepting user input at end of auto mission
2014-10-20 10:46:14 +09:00
Andrew Tridgell
c3d839456b
Copter: support logging while disarmed
2014-10-17 16:29:59 +09:00
Randy Mackay
b9977a1115
Copter: add land_complete_maybe flag
2014-09-19 16:43:15 +09:00
Randy Mackay
3fa3cb6d65
Copter: remove EPM neutral from ch7/ch8 switch
...
The EPM library returns the pwm output sent to the EPM to the neutral
position automatically meaning an explicit ch7/ch8 setting is not
required
2014-09-17 21:13:45 +09:00
Randy Mackay
14d80910ec
Copter: integrate EPM ver2
2014-09-17 21:13:35 +09:00
Jason Short
882edaf787
Copter: add pitch axis flipping
...
Added Pitch axis flipping. You must be pushing forward or back 3° to make it flip in Pitch axis or it will flip in the default roll axis.
Added some extra throttle control to maintain altitude
removed the CH7 ability to exit Flip mode. It will exit only if completing flip or user aborts with control sticks.
2014-08-23 23:40:07 +09:00
priseborough
162b824424
Copter : Distinguish between EKF and INAV errors
2014-08-18 14:17:50 +09:00
Randy Mackay
5b114dcad5
Copter: remove unused WP_OPTION definitions
...
This also kicks off the build for AC3.2-rc5
2014-08-16 12:18:48 +09:00
Andrew Tridgell
e260f1c569
Copter: convert to using StorageManager
2014-08-13 18:46:44 +10:00
Randy Mackay
4723ed5e6e
Copter: rename EKF check's error message to dataflash
...
It checks more than the compass so the old error message was misleading.
2014-08-09 15:48:42 +09:00
Randy Mackay
0518439841
Copter: move relay from ch6 to ch7/ch8
2014-08-09 13:37:12 +09:00
ggregory8
3832c46998
Copter: Add takeoff enum for guided_mode
2014-08-05 10:25:29 +09:00
Randy Mackay
8a07701d07
Copter: remove ch6 tuning of INAV_TC
...
Users normally never change these parameters and if by chance they do want
to, they can set them before flying
2014-08-01 15:14:42 +09:00
Andrew Tridgell
3ccac6736d
Copter: rename TELEM2_PROTOCOL to SERIAL2_PROTOCOL
...
this matches SERIAL2_BAUD
2014-07-30 14:49:10 +10:00
Matthias Badaire
147e91877e
Copter: Add SERIAL2_PROTOCOL for GCS and FRsky telemtry
...
this allows selection of protocol type on telem2. The default is
MAVLink, but can be selected as FrSky protocol
2014-07-29 17:08:19 -07:00
Randy Mackay
7cc1501dc6
Copter: integrate baro glitch protection
2014-07-28 22:16:20 +09:00
akdslr
dc67058771
ArduCopter: Removed CONFIG_SONAR_SOURCE, SONAR_SOURCE_ADC, and SONAR_SOURCE_ANALOG_PIN since no longer used
2014-07-24 14:41:55 +10:00
Randy Mackay
7bda6cbadf
Copter: integrate EKF check
...
Check runs at 10hz
Log ekf check failures and ekd failsafes
2014-07-22 23:13:25 +09:00
Andrew Tridgell
49954a3a61
Copter: use sensors from board subtypes
2014-07-14 09:44:35 +10:00
Randy Mackay
65e5367619
Copter: rename hybrid to poshold
2014-07-11 14:09:01 +09:00
svefro
e892b4cd04
Copter: Ch7/8 option to retract mount
...
-Define AUX_SWITCH_RETRACT_MOUNT in defines.h
-Added 27=Retract Mount to Parameters.pde CH7 and CH8
-added int on CH7/8opt AUX_SWITCH_RETRACT_MOUNT
-Added Case #if Mount == ENABLE to set mount mode
made set_mode public in AP_Mount.h lib
2014-07-10 13:03:28 +09:00
Robert Lefebvre
1f422c86c1
Arducopter: Add independent rate roll and pitch P, I, D tuning options. Add rate feedforward tuning options for tradheli.
2014-07-08 20:18:08 +09:00
Randy Mackay
f5640dadbf
Copter: guided mode velocity controller
2014-07-06 17:01:08 +09:00
Randy Mackay
fdc0ec837b
Copter: add nav_guided suport to Auto mode
2014-07-06 17:00:31 +09:00
Andrew Tridgell
21b0b3bc15
Copter: log up to 3 mags
2014-07-04 12:07:59 +10:00
Randy Mackay
8c488ebd87
Copter: use common Log_Write_Camera
...
pair programmed with Craig Elder
2014-06-17 14:11:39 +10:00
Randy Mackay
810c87969c
Copter: Ch7/8 switch to enable/disable feed forward and accel limiting
2014-06-10 20:03:04 +09:00
Andrew Chapman
3f0a52cb53
Copter: ch7/8 switch for auto pause/continue
...
- added new mode for CH7/CH8 (#24 , auto mission reset)
- changed mission.start() to mission.start_or_resume() in auto_init()
2014-05-08 23:09:42 +09:00
Randy Mackay
b5ed23f592
Copter: integrate skeleton Hybrid mode
2014-04-23 14:59:17 +09:00
Randy Mackay
7af5d4a8ce
Copter: remove RALLY_WP_SIZE definition
2014-04-19 15:00:30 +09:00
Andrew Chapman
fa3732ac6d
Copter: integrate AP_Rally
2014-04-19 15:00:23 +09:00
Randy Mackay
e6d2692eab
Copter: Loiter_Turns moves to edge of circle if location provided
2014-04-16 16:28:08 +09:00
Emile Castelnuovo
9e31f032c2
Copter: added VRBRAIN board #includes and #defines
2014-04-08 16:19:20 +10:00
Randy Mackay
47c1cb8b99
Copter: log parachute events
2014-04-07 13:36:59 +09:00
Randy Mackay
340f3a7f9d
Copter: ch7/ch8 parachute release
2014-04-07 13:36:47 +09:00
Andrew Tridgell
640b64f5e4
Copter: convert to new GPS API
2014-04-01 06:38:24 +11:00
Randy Mackay
0822adfb34
Copter: integrate spline navigation
2014-03-28 09:22:59 +09:00
Andrew Tridgell
11e5b95878
Copter: updates for GPS changes
2014-03-24 12:04:46 +11:00
Randy Mackay
f3813593b7
Copter: use Dataflash lib's Log_Write_Cmd
2014-03-19 12:12:11 +09:00
Randy Mackay
b587d0d597
Copter: pass eeprom start to Mission constructor
2014-03-19 12:11:56 +09:00
Randy Mackay
f77b2af661
Copter: use common location options masks
2014-03-19 12:10:26 +09:00
Randy Mackay
37fe229ded
Copter: remove unused definitions
2014-03-19 12:10:12 +09:00
Randy Mackay
c56f521897
Copter: ch6 tuning of RC_FEEL_RP
2014-03-04 22:23:53 +09:00
Randy Mackay
fdae812814
Copter: DO_SET_ROI persists across waypoints
...
Users should add a DO_SET_ROI command with zero lat, lon and alt to
restore the yaw control to the default control (which is normally
look-at-next-wp)
2014-02-18 21:36:02 +09:00
Randy Mackay
00913ffe1b
Copter: throttle rate to simple P controller
...
Saves at least 15bytes of RAM
2014-02-16 13:35:40 +11:00
Randy Mackay
20989fd5e9
Copter: allow ch6 tuning of EKF
2014-02-15 05:48:20 +11:00
Andrew Tridgell
a112694a50
Copter: added AUX switch option for enable/disable EKF
2014-02-15 05:48:17 +11:00
Andrew Tridgell
24f2ac20de
Copter: removed HIL_MODE_ATTITUDE
...
this really can't work any more, as AHRS can't support it
2014-02-15 05:29:46 +11:00
Randy Mackay
aa4c3eaffe
Copter: resolve RTL state compiler warnings
2014-02-15 05:27:48 +11:00
Randy Mackay
f46ff2b44e
Copter: remove unused defines
2014-02-15 05:27:46 +11:00
Randy Mackay
aec67cd3df
Copter: integrate control_autotune
2014-02-15 05:27:44 +11:00
Randy Mackay
d90d3d8dca
Copter: integrate control_flip
2014-02-15 05:27:44 +11:00
Randy Mackay
ef666c73ab
Copter: remove Position mode
2014-02-15 05:27:42 +11:00
Randy Mackay
1457a9d31a
Copter: auto_mode to global scope
2014-02-15 05:27:41 +11:00
Randy Mackay
689e92eb33
Copter: control_rtl
2014-02-15 05:27:39 +11:00
Randy Mackay
65f7bf92f4
Copter: replace yaw_mode with auto_yaw_mode
2014-02-15 05:27:37 +11:00
Randy Mackay
2219f21744
Copter: add RC_FEEL_RP parameter
...
Values from 0 ~ 100 control amount of filtering on roll and pitch input.
100 = no filter so crisp feel, 0 = a lot of filtering so very sluggish
response
2014-02-12 16:28:41 +09:00
Dneault
f48e106271
Copter: add coax heli support
...
Motors should be attached to RCOutputs 1 and 2, Flaps should be connected
to RC outputs 3 and 4
2014-02-07 12:36:04 +09:00
Randy Mackay
214a859e97
Copter: remove unused RADX100 definition
...
The real purpose of this small change is to kick off the autobuilder for
the AC3.1.1 release.
2014-01-26 13:41:14 +09:00
Randy Mackay
a45b9cbe9a
Copter: remove unused RELAY_TOGGLE definition
2014-01-26 10:10:02 +09:00
Randy Mackay
dee5fb212a
Copter: remove dup definition of FRAME_ORIENTATION
...
Ideally the frame orientation parameter should be moved to the motors
class
2014-01-21 21:44:17 +09:00
Randy Mackay
ae4f368f16
Copter: allow ch6 tuning of loiter speed
2014-01-15 15:22:52 +09:00
Randy Mackay
a3527ade61
Copter: move EARTH_FRAME definition to defines.h
...
defines.h is for defining enumerations and other unchanging values while
config.h is for changeable values like parameter defaults, enabling or
disabling sensors.
2014-01-14 21:53:13 +09:00
Randy Mackay
66859686a0
Copter: remove some unused definitions
2014-01-14 21:21:54 +09:00
Randy Mackay
138c2803be
Copter: combine NTUN and INAV dataflash msgs
2014-01-13 22:00:11 +09:00
Randy Mackay
df9d1614e2
Copter: remove PID logging
...
Almost never used and eats up limited log description space
2014-01-13 17:23:39 +09:00
ctech4285
2b5d8aa5b7
Copter: integrate EPM library
2013-12-17 15:36:42 +09:00
Andrew Tridgell
9716e80e21
Copter: moved ap_message into GCS.h
2013-12-17 11:51:35 +11:00
Andrew Tridgell
cc3ee2ec0c
Copter: added dual compass logging when available
2013-12-10 13:31:42 +11:00
Randy Mackay
cf0547e854
Copter: remove AN0~AN15 pin definitions
2013-12-06 10:28:28 +09:00
Randy Mackay
e978a710cc
Copter: remove PIEZO_PIN definition
2013-11-30 18:21:01 +09:00
Randy Mackay
7ef04bb73b
Copter: rename nav_yaw to control_yaw
2013-11-27 22:48:20 +09:00
Randy Mackay
10d6a9a34e
Copter: replace Log_Write_Motors with Log_Write_RCOU
2013-11-27 20:18:18 +09:00
Randy Mackay
af657d58b9
Copter: RCIN dataflash logging
2013-11-27 16:46:25 +09:00
Randy Mackay
87127f0ab8
Copter: allow battery failsafe to trigger RTL
2013-11-16 14:46:57 +09:00
Randy Mackay
bc1e06757b
Copter: allow GPS failsafe to trigger AltHold
...
FS_GPS_ENABLE parameter accepts two new options, 2=AltHold,
3=LandEvenFromStabilize.
If set to 3 the GPS failsafe will trigger and LAND even from manual
flight modes like Stabilize and ACRO. This is useful for users who want
to ensure their copters can never stray outside the circular fence (the
fence only triggers when it knows it is outside the bounds, and it can't
know this if it has no GPS)
2013-11-16 13:55:59 +09:00
Randy Mackay
ae87759e6d
TradHeli: add THROTTLE_MANUAL_HELI
...
Move check_dynamic_flight to run as scheduled task
2013-11-15 22:57:53 +09:00
Randy Mackay
f0f6e85b39
Copter: ARMING_CHECK made into bitmask
...
Allows arming checks to be individually enabled or disabled for baro,
compass, GPS, INS, parameters, RC and board voltage
2013-11-15 17:13:56 +09:00
Jason Short
371dc8c616
Copter: Drift Mode
...
Changes Toy mode declarations to Drift mode.
Requires GPS, Mode 2 transmitter
Drift mode mixes Roll, Pitch and Yaw into a single stick on mode two transmitters.
2013-11-14 14:43:15 +09:00
Randy Mackay
06ce98a2f4
Copter: add SINGLE_FRAME definition
2013-11-12 23:40:32 +09:00
Jason Short
520a535c21
Copter: TOY mode updates
2013-11-02 21:34:48 +09:00
Randy Mackay
798c4e2278
Copter: more Ch7/Ch8 event logging
...
Additional event logging for SaveWP, Fence, Acro trainer, Save Trim
2013-11-01 11:53:16 +09:00
Randy Mackay
2326b2e5f5
Copter: crash checker
...
Crash is determined to have happened when the copter is 20deg more than
the ANGLE_MAX parameter continuously for more than 2 seconds
Not activated when in ACRO mode or while flipping
2013-10-29 22:15:12 +09:00
Andrew Tridgell
92bf4b9c89
Copter: added MAVLink SYSTEM_TIME message
2013-10-24 14:22:47 +11:00
Randy Mackay
fb49cd82c1
Copter: add LAND to aux switch
...
Fix aux switch AUTO and RTL so they resets flight mode if still in those
modes when switch brought low
2013-10-22 13:13:36 +09:00
Randy Mackay
6c0cb5f84d
AutoTune: bug fix and GCS messages
2013-10-19 21:54:18 +09:00
Randy Mackay
0cbedded0d
Copter: autotune to use 2pos switch only
...
method of recording state also changed
other code clean-up
pair programmed withe Leonard
2013-10-18 13:57:50 +09:00
Randy Mackay
2e75d5dec3
Copter: autotune log when limits reached
2013-10-17 11:05:31 +09:00
Randy Mackay
7e657ce856
AutoTune: abandon tuning if rate P hits minimum
...
Fixes from Leonard
2013-10-09 13:35:43 +09:00
Andrew Tridgell
4b68dd48f7
Copter: use ins.wait_for_sample() for main loop
...
this takes advantage of the INS specific method to wait for a sample
2013-10-08 19:20:34 +11:00
Randy Mackay
31cea0140d
Copter: Leonard's AutoTuning for Roll and Pitch
2013-10-04 15:50:47 +09:00
Randy Mackay
dab4f032f9
Copter: integrate BattMonitor
2013-10-03 11:16:28 +09:00
Randy Mackay
c3f7146f03
Copter: improve check of frame type to catch spelling errors
2013-09-27 14:35:16 +09:00
Randy Mackay
a53d28e018
Copter: remove support for dmp ahrs
2013-09-27 10:42:49 +09:00
Randy Mackay
77b5cb5d3f
Copter: correct typo in error #define
2013-09-24 21:45:52 +09:00
Randy Mackay
c596b27719
Copter: add dataflash error for GPS glitch
2013-09-24 21:41:48 +09:00
Andrew Tridgell
3378c7901a
Copter: added support for the flymaple board
2013-09-24 13:51:28 +10:00
Randy Mackay
fd047cc968
Copter: AUTO ch7/ch8 option
2013-08-19 18:09:23 +09:00
Randy Mackay
3a5a15a15f
Copter: allow CH6 tuning of sonar gain
2013-08-18 15:44:54 +09:00
Randy Mackay
69da4e99f8
Copter: add ch7/ch8 Auto and Land option
...
CH7/CH8 high initiates AUTO mode, low initiates Land. Ideally high
would be a new take-off flight mode so this may need some rework.
2013-08-15 16:08:33 +09:00
Randy Mackay
e1fe4946fb
Copter: Sprayer enable added to CH7/CH8 switch
2013-08-05 21:12:29 +09:00
Randy Mackay
49dbdce89c
Copter: split ACRO_P into ACRO_RP_P and ACRO_YAW_P
2013-08-05 21:05:00 +09:00
Randy Mackay
786d6824ae
Copter: Acro Trainer added to Ch7/Ch8 switch
2013-08-05 21:04:55 +09:00
Randy Mackay
21e523b9ac
Copter: Acro trainer separated into limited and leveled
2013-08-05 21:04:53 +09:00
Randy Mackay
39ab4f62ef
Copter: add SPORT mode
2013-08-05 21:04:41 +09:00
Randy Mackay
2c48c20088
Copter: generalize 3 pos switch for all ch7/ch8 options
2013-07-29 16:28:04 +09:00
Olivier-ADLER
87d062905e
Copter: 3 positions switch support for CH7 and CH8 - new 3 positions SIMPLE / SUPERSIMPLE mode
...
3 positions modes must use mode number >= 100
pre-arm check correction for CH7 - CH8 check
2013-07-29 15:12:10 +09:00
Randy Mackay
c3daf78340
Copter: reset loiter target when landed
2013-07-28 18:18:41 +09:00
Randy Mackay
c937fe45e1
Revert "Copter: Remove CH7 & CH8 Enable / Disable of GeoFence"
...
This reverts commit e25b8933f3
.
2013-07-20 15:00:08 +09:00
Randy Mackay
7ea971d948
Copter: check set_mode for failure
...
Previously if set_mode failed it would return the copter to stabilize
mode. With this commit set_mode returns a true/false indicating whether
it succeeded or not so the caller can make the decision as to the
appropriate response which could be to stay in the current flight mode
or try another flight mode.
2013-07-20 11:01:10 +09:00
Craig3DR
e25b8933f3
Copter: Remove CH7 & CH8 Enable / Disable of GeoFence
2013-07-18 17:06:53 +09:00
Randy Mackay
b3da8a462f
Copter: CH6 tuning definition clean-up
...
Renamed and reorganised the CH6 #defines and parameter definitions
2013-06-29 23:51:43 -10:00
Randy Mackay
23ce35d292
Copter: remove unused NAV_WP_INAV #define
2013-06-01 18:21:28 +09:00
Randy Mackay
00bd1bf8ea
Copter: RESETTOARMEDYAW order and comments
...
We should keep the order in the case statement the same as the #define
order.
2013-05-21 10:58:34 +09:00
Dr Gareth Owen
e9d640ced8
added ch7 option to reset yaw back to what it was when quad was armed
2013-05-21 10:40:30 +09:00
Randy Mackay
4ad395e7be
Copter: merge WPNAV into NTUN dataflash message
2013-05-19 22:53:35 +09:00
Randy Mackay
38239c652a
Copter: ch8 aux switch
...
Ch8 can be used as an aux switch like ch7. Has all the same options as
ch7 and there is a safety check to ensure both switches aren't set to
the same function so as to avoid interfering with each other
2013-05-17 14:42:28 +09:00
Randy Mackay
566daf883a
Copter: remove unused MODE bit from LOG_BITMASK
...
We always log the mode so no need for this bit
2013-05-17 12:26:42 +09:00
Randy Mackay
33d1129904
Copter: remove unused TB_RATIO parameter
2013-05-14 16:56:55 +09:00
Randy Mackay
e130c8041c
Copter: remove unused event definitions
2013-05-13 18:07:44 +09:00
Randy Mackay
bb7aec2600
Copter: log compass failur to dataflash
2013-05-13 18:01:30 +09:00
Randy Mackay
ad656c7e8a
Copter: allow lat/lon to be specified for land
2013-05-10 22:37:15 +09:00
Andrew Tridgell
95120ed43d
Copter: use library gcs_severity
2013-05-09 09:28:49 +10:00
Randy Mackay
bab9fa25e5
Copter: add GCS failsafe
2013-04-29 21:30:22 +09:00
Randy Mackay
58d1da2d80
Copter: integrate AC_Fence in place of limits
...
Lesser functionality than limits but saves more than 150 bytes and it
works
2013-04-27 11:14:07 +09:00
Randy Mackay
a53e5f747b
Copter: add fourth yaw behaviour, look-at-home
...
Added get_wp_yaw_mode to remove duplication of checks of the
WP_YAW_BEHAVIOR parameter
2013-04-20 15:36:24 +09:00
Andrew Tridgell
67484a2ea1
Copter: make copter code compatible with the new logging system
...
not fully converted yet
2013-04-20 13:52:36 +10:00
Randy Mackay
37abfdc65a
Copter: make CIRCLE_RATE a tunable parameter
...
Also bug fix to check of how many time it has rotated during a loiter
turns mission command
2013-04-20 12:03:55 +09:00
Randy Mackay
0fc9c8739e
Copter: add WP_YAW_BEHAVE parameter
...
Allows user to control whether nose points towards next waypoint and/or
home when RTLing.
Replaces YAW_OVR_BEHAVE which had a very similar purpose. Almost nobody
ever knew about or used this parameter.
2013-04-18 15:30:18 +09:00
Randy Mackay
2b4a7d60a9
Copter: remove unused throttle modes
...
These were useful for testing the alt-hold when it was first introduced
but now they just add complexity
2013-04-17 22:14:22 +09:00
Randy Mackay
b48864e1ad
Copter: allow CH6 tuning of compass declination
2013-04-15 21:50:44 +09:00
Randy Mackay
629d23b7e2
Copter: remove WP_SPEED and WP_RADIUS parameters
...
AC_WPNav library has equivalent params with very similar names
2013-04-14 13:27:37 +09:00
Randy Mackay
bffe4fa412
Copter: remove NAV_LAT and NAV_LON
...
Loiter and navigation controllers now combined
2013-04-14 12:09:45 +09:00
Randy Mackay
1ee825ee9a
Copter: move alt and wp checking to AC_WPNAV
...
RTL fix so that if it starts rtl-ing from above 80m it returns home
while descending instead of descending at initial position.
add get and set_target_alt_for_reporting
2013-04-14 10:39:23 +09:00
Randy Mackay
1516972eaa
Copter: add panorama to CIRCLE mode
...
Yaw will slowly rotate if CIRCLE_RADIUS is set to zero
Circle center is projected forward CIRCLE_RADIUS from current position
and heading
2013-04-14 10:38:01 +09:00
Randy Mackay
597a4b912a
Copter: fix to allow building HIL_MODE_SENSORS
2013-03-18 13:41:52 +09:00
Randy Mackay
f9539384a1
Copter: rename failsafe to failsafe_radio
...
Makes way for separation of failsafes for throttle, gps and gcs
2013-03-16 17:14:21 +09:00
Randy Mackay
cb84ec9d9b
Copter: add current based compass compensation
2013-03-03 23:02:36 +09:00
Andrew Tridgell
c2fd1512ff
Copter: use voltage_average() so as to avoid INPUT_VOLTS
2013-03-03 16:16:01 +11:00
Randy Mackay
cbde042ec5
Copter: remove non-inav loiter and wp controllers
...
lon_speed, lat_speed changed to float
do_takeoff, do_land now set roll-pitch, yaw and nav modes specifically
removed fast_corners functionality (may need to be reimplemented with
new inertial nav controllers)
2013-02-24 14:41:52 +09:00
Randy Mackay
609676e26c
Copter: add logging of compass values
...
Removed rarely used ITERM because we didn't have enough bits in the log
mask
2013-02-24 14:41:48 +09:00
Randy Mackay
1410063a14
Copter: new ROLL_PITCH_WP_INAV roll-pitch mode
...
small corrections to allow waypoints to work with new inertial nav wp
controller
2013-02-24 14:41:40 +09:00
Randy Mackay
fcf102b2cf
Copter: inertial nav waypoint controller
...
#define added to allow compile time selection of traditional or inav
based loiter and wp controllers
2013-02-24 14:41:09 +09:00
Randy Mackay
ce370bab0c
Copter: rename CUR and CURR to CURRENT for logging
...
Based on user complaint that enable/disable was using CUR while message
was appearing as CURR
2013-01-26 17:20:41 +09:00
Randy Mackay
0056bfadd7
Copter: rename ROLL_PITCH_LOITER
...
new name ROLL_PITCH_LOITER_INAV makes it more clear that it should only
be used with the new inertial nav loiter controllers
2013-01-25 23:27:31 +09:00
Randy Mackay
aaecc25ac7
Copter: leonard's inav2
...
Moved loiter controller to navigation.pde
2013-01-25 15:16:35 +09:00
Randy Mackay
fd02cfe706
Copter: added set_nav_mode to control initialisation of nav controllers
...
Renamed run_navigation_controllers() to run_autopilot()
Renamed update_nav_wp() to update_nav_mode()
Renamed wp_control to nav_mode to be more consistent with roll-pitch,
yaw and throttle controllers
2013-01-25 15:16:29 +09:00
Randy Mackay
9a09f086d2
Copter: Leonard Hall's inertial nav ver 2
2013-01-23 12:34:49 +09:00
rmackay9
ab1978ad50
Copter: Leonard Hall's inertial nav based loiter
2013-01-22 18:38:00 +09:00
Robert Lefebvre
dde713aaa5
Arducopter: Backing out my changes for a new Loiter Repositioning mode. Leonard and Jonathan's work will trump this.
2013-01-20 21:32:00 +09:00
James Bielman
5631f865b2
Update floating point calculations to use floats instead of doubles.
...
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
2013-01-16 13:52:01 +11:00
Randy Mackay
8bbc93bb04
Copter: added CH7 switch to enabling/disable the sonar in flight
...
This indirectly switches surface tracking on/off which is useful to
avoid tracking the tops of uneven objects when far above the ground
2013-01-14 14:00:08 +09:00
rmackay9
f25f1cb3bf
ArduCopter: changed alt hold to use the sonar if enabled and healthy
2013-01-13 19:56:19 +11:00
Randy Mackay
87627d883b
ArduCopter: use new logging method for remaining packet types
...
Additional changes include renaming RAW dataflash type to IMU
2013-01-13 00:17:44 +09:00
James Bielman
ab37f833db
MS5611: Fix CONFIG_MS5611_SERIAL definitions.
...
- Make sure the values are defined as integers. We were always using
SPI rather than using I2C when desired.
2013-01-09 11:19:51 -08:00
Andrew Tridgell
b079a96eaf
Copter: removed GPS_STATUS message
...
this message is huge, and completely pointless now that we have
num_satellites in GPS_RAW_INT
2013-01-05 20:39:31 +11:00
Andrew Tridgell
c48714be16
Copter: enabled PX4 sensors
2013-01-05 20:39:31 +11:00
rmackay9
2181ec2ab0
ArduCopter: log watchdog event to dataflash
2013-01-02 09:55:37 +11:00
rmackay9
672fdfbf71
ArduCopter: added ERR dataflash message
...
Failsafe events changed to errors so they are more obvious.
Errors recorded to dataflash for failure to init compass and optical flow sensor.
Errors recorded for pwm failure.
Resolved a compile error when dataflash logging is disabled.
2013-01-02 09:55:37 +11:00
rmackay9
677b38a48e
ArduCopter: first implementation of surface tracking using sonar
...
Note: not yet enabled as part of any flight mode
2013-01-02 09:55:37 +11:00
rmackay9
68b62abd38
ArduCopter with the new Camera and Relay classes for APM1 and APM2.
...
All changes by Sandro Benigno
2013-01-02 09:55:37 +11:00
rmackay9
e77b54c7dc
ArduCopter: bug fix to GUIDED mode. Now checks that desired altitude was reached before deciding the waypoint is complete.
2013-01-02 09:24:31 +11:00
Craig@3DR
0ed25cf719
Global change all references from
...
GPS_PROTOCOL_MTK16
to
GPS_PROTOCOL_MTK19
2013-01-02 09:24:31 +11:00
Jason Short
8b62c4630b
ACM: Restore Multi-mode support
2013-01-02 09:20:08 +11:00
Robert Lefebvre
6e64b1b357
ACM: Precision Loiter RePositioning code.
...
Protected behind a #define
2013-01-02 09:19:39 +11:00
rmackay9
1b5ff6aac6
ArduCopter: restore initial climb to RTL
2013-01-02 09:19:17 +11:00
rmackay9
f4c50353b9
ArduCopter: allow tuning of the Throttle Rate D term
2013-01-02 09:16:48 +11:00
Andrew Tridgell
3c0440b0b4
Math: use common degrees() and radians() functions
2012-12-20 14:53:22 +11:00
Andrew Tridgell
9e986801c9
Copter: fixed SITL for ArduCopter
2012-12-20 14:52:34 +11:00
Pat Hickey
d93d932831
ArduCopter: defines fixes
...
Conflicts:
libraries/AP_Common/Arduino.mk
2012-12-20 14:52:28 +11:00
Pat Hickey
2aa4657315
ArduCopter: changes to use CONFIG_HIL_BOARD
2012-12-20 14:52:28 +11:00
rmackay9
56ceb230cb
ArduCopter: add YAW_OVR_BEHAVE to allow control of when autopilot takes back control of yaw after pilot overrides it during a mission
2012-12-09 18:04:31 +09:00
rmackay9
0f7bb79d89
ArduCopter: add comments to tuning parameters.
...
Use RC_CHANNEL types as defined by RC_Channel library.
Remove unused definitions.
2012-12-09 16:44:42 +09:00
rmackay9
9dd978576b
ArduCopter: auto yaw changes to allow pilot override of yaw during missions
...
Added set_yaw_mode to better control of yaw controller changes and variable initialisation.
Replaced AUTO_YAW mode with separate yaw controllers YAW_LOOK_AT_NEXT_WP, YAW_LOOK_AT_LOCATION, YAW_LOOK_AT_HEADING.
Pilot manual override of yaw causes yaw to change to YAW_HOLD (i.e. manual yaw) until next waypoint is reached.
Added get_yaw_slew function to control how quickly autopilot turns copter
Changed YAW_LOOK_AHEAD to use GPS heading and moved to new get_look_ahead_yaw function in Attitude.pde
Renamed variables: target_bearing->wp_bearing, original_target_bearing->original_wp_bearing.
Removed auto_yaw_tracking and auto_yaw variables and update_auto_yaw function as they are no longer needed.
Simplified MAV_CMD_CONDITION_YAW handling (do_yaw). We lose ability to control direction of turn and ability to do long panorama shots but it now works between waypoints and save 20bytes.
2012-12-08 14:23:32 +09:00
rmackay9
68ca123224
ArduCopter: remove some unused #defines
2012-12-07 15:17:35 +09:00
rmackay9
3a90fc77f9
ArduCopter: add dataflash logging of camera events
2012-12-07 00:57:08 +09:00
rmackay9
4ca27defb3
ArduCopter: update comments related to CH7 switch options
2012-12-06 17:40:36 +09:00
rmackay9
a5bb54e36e
ArduCopter: RTL clean-up and slightly improved landing sensor
...
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
2012-12-06 10:31:52 +09:00
rmackay9
d7f76ebd87
ArduCopter: add tuning of throttle rate controller's I term (THROTTLE_KI)
2012-12-06 10:31:25 +09:00
rmackay9
7b4ed2d227
ArduCopter: restored landing detector to landing throttle mode.
...
Added LAND_SPEED parameter to control the rate of descent for the last 10m of a landing.
Added CH6 tuning for accel based throttle controller.
2012-12-06 10:31:20 +09:00
rmackay9
3cbef57c64
ArduCopter: first merge of leonard's accel based altitude controller plus other changes from Randy
...
Changes include:
New low-level get_throttle_accel function takes target acceleration and compares vs earth-frame Z accelerometer values to produce output to motors.
Higher level throttle controllers modified to call new get_throttle_accel controller
Throttle_rate_stabilized controller added which maintains a desired climb/descent rate
Throttle_land controller added - descends using normal auto throttle controller to 10m then descends at 50cm/s
Multiple throttle modes added including landing mode
Land flight mode no longer needs GPS
Throttle cruise maintenance moved to update_throttle_cruise function
2012-12-06 10:30:49 +09:00
Robert Lefebvre
6b8c39dd10
ACM: Creating Yaw_Look_Ahead yaw mode.
...
This function is not fully tested yet.
2012-11-26 21:37:13 -05:00
Andrew Tridgell
bcf740a82f
ACM: support 16 character parameter names
2012-11-20 21:38:58 +11:00
Jason Short
d2a5928c06
Ap state updates
2012-11-09 22:15:15 -08:00
rmackay9
1f801714e8
ArduCopter: incorporate new version of inertial navigation
...
Moved several navigation functions from ArduCopter.pde to navigation.pde
2012-11-07 19:21:31 +09:00
rmackay9
a1b4ec6d0e
ArduCopter: move to use new INS library instead of IMU library
2012-11-07 19:21:09 +09:00
Andrew Tridgell
9592be5af7
ACM: saved some more memory for strings
2012-10-22 18:57:08 +11:00
Robert Lefebvre
592f4040fd
Changed RLT Yaw Mode for TradHeli. Also a few comment cleanups.
2012-10-18 16:39:05 -04:00
rmackay9
95763e610b
ArduCopter: allow DMP to run in parallel with DCM
...
Parallel DMP can be enabled by #define SECONDARY_DMP_ENABLED in APM_Config.h
New DMP dataflash log type added to allow easy comparison with DCM
2012-09-30 00:25:40 +09:00
rmackay9
bae53807b2
ArduCopter: tiny formatting change in defines.h
2012-09-27 17:40:54 +09:00
Jason Short
34e07c826f
ACM : Added centralized Iterm logging at a lower rate. Logs all iterms.
2012-09-10 20:26:48 -07:00
uncrustify
b9ba41c12a
uncrustify ArduCopter/defines.h
2012-08-21 18:57:21 -07:00
Jason Short
11b7475ff9
ACM : Added CH7 multimode triggers, split Toy mode into two
2012-08-11 22:37:26 -07:00
Jason Short
07bd1940e7
ACM Defines.h -added Toy mixer enums
2012-08-09 16:59:43 -07:00
rmackay9
014f5aae99
ArduCopter: added DMP_ENABLE #define and CH6 tuning value for AHRS_KP
2012-07-28 14:21:07 +09:00
Andreas M. Antonopoulos
c73f7ef3ab
AP_Limits library, provides modular "limits" such as altitude and geo-fencing.
2012-07-14 19:26:17 -07:00
Jason Short
ab564b8a86
defines.h
...
removed Approach mode enumeration
2012-07-01 13:40:11 -07:00
Jason Short
0011190880
defines.h: Toy Mode defines for flight modes
2012-06-29 21:20:28 -07:00
Jason Short
5e4d28baf0
Added Toy mode to navigation
2012-06-29 21:20:27 -07:00
Jason Short
807c4ced34
Added Toy Mode defines
2012-06-25 23:08:25 -07:00
Robert Lefebvre
30e55533dc
Change to increase Parameter space as we have run out.
...
This will decrease the max number of waypoints from 186
to 169.
2012-05-30 20:41:53 -04:00
Robert Lefebvre
a285e2779f
CopterLEDS changes for APM2
2012-05-15 10:07:03 -04:00
Andrew Tridgell
4fee26437b
MAVLink: make ACM build with MAVLink 1.0 possible in arduino GUI
2012-04-24 22:24:58 +10:00
Adam M Rivera
97040a7b3a
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
2012-04-23 00:03:37 -05:00
rmackay9
c993049c48
ArduCopter - combined CH6_DAMP and CH6_STABILIZE_KD tuning parameters to avoid confusion
2012-04-21 23:24:57 +09:00
Adam M Rivera
a3842734a9
Planner/defines.h: Updated the enumeration value for APPROACH so as not to disturb the order of the universe.
2012-04-18 10:32:01 -05:00
Adam M Rivera
f9affb3295
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
...
Conflicts:
ArduCopter/Parameters.h
2012-04-16 10:23:01 -05:00
rmackay9
870b5e5f75
ArduCopter - CH6 Tuning - added AHRS_YAW_KP parameter as 30. Now you can easily set the amount that the mag is used to correct the gyro based yaw estimate in the DCM
2012-04-16 23:47:57 +09:00
Adam M Rivera
83fe6733d4
Defines: Added new control mode (APPROACH).
2012-04-15 16:52:32 -05:00
rmackay9
d70f5da5e0
ArduCopter - LEDS - define pins to be used for COPTER_LEDS.
...
Code by Robert Lefebvre
2012-04-12 22:55:36 +09:00
rmackay9
0efb0e5b4d
ArduCopter - added CH6_STABILIZE_KD tuning value
2012-03-29 21:09:41 +09:00
rmackay9
599cea21bb
Added multiple new tuning parameters to the inflight channel 6 tuning feature:
...
#define CH6_YAW_KI 24
#define CH6_ACRO_KP 25
#define CH6_YAW_RATE_KD 26
#define CH6_LOITER_KI 27
#define CH6_LOITER_RATE_KI 28
2012-03-28 23:58:58 +09:00
rmackay9
1f4cfb9333
ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers.
2012-03-25 16:09:08 +09:00
Andrew Tridgell
547b4ed55b
AHRS: adapt ArduCopter for new AHRS framework
2012-03-19 17:29:02 +11:00
Jason Short
cb8729109c
ACM: Added Loiter_D for tuning as #23
2012-03-10 14:17:16 -08:00
Andrew Tridgell
9a06d35772
make 'ENABLE' and 'ENABLED' mean the same things
...
users get this wrong far too often!
2012-03-10 10:34:33 +11:00
Andrew Tridgell
2596acc8eb
ACM: removed incorrect mode definition
2012-03-10 10:34:30 +11:00
Andrew Tridgell
a0ce202d87
ACM: added SIMSTATE, DCM and HWSTATUS messages to ACM
2012-03-10 10:34:27 +11:00
Jason Short
0ce0c7c262
Added Loiter_rate_tuning
2012-02-26 11:33:36 -08:00
Andrew Tridgell
6929226b96
ACM: expanded EEPROM parameter area by 256 bytes
2012-02-18 10:51:57 +11:00
Jason Short
0075901f77
upped rate loop to 250hz
2012-02-17 15:23:59 -08:00
Andrew Tridgell
617082769a
go back to 1024 bytes for variables in EEPROM
2012-02-13 16:22:52 +11:00
Andrew Tridgell
16417b651e
the ACM parameters have a max size of 1114 bytes
...
to ensure that all parameters can be saved, expand parameter area by
256 bytes
2012-02-13 16:22:52 +11:00
Pat Hickey
470fd8788e
ArduCopter Channel Config: config vars for user override of MOT_n mapping
...
* config variable CONFIG_CHANNELS has possible values
CHANNEL_CONFIG_DEFAULT or CHANNEL_CONFIG_CUSTOM
* config_channels.h only provides APM1/APM2 mapping when
CONFIG_CHANNELS == CHANNEL_CONFIG_DEFAULT
2012-02-11 16:05:51 -08:00
Pat Hickey
b245265669
Arducopter Frames: revert to old HEXA_FRAME and OCTA_FRAME defines.
...
* HEXA_X_FRAME and HEXA_PLUS_FRAME merged back into HEXA_FRAME
* OCTA_V_FRAME merged back into OCTA_FRAME
2012-01-31 18:18:13 -08:00
Pat Hickey
0e9294538b
Add Max's changes for new MOT mappings. Defines new FRAME_CONFIG types.
...
* HEXA_FRAME has been eliminated and changed to HEXA_X_FRAME and
HEXA_PLUS_FRAME
* OCTA_FRAME stays the same name for X and +, but the V frame
configuration requires new OCTA_V_FRAME name.
2012-01-31 18:18:13 -08:00
Jason Short
f225efef9f
tuning
2012-01-30 21:13:03 -08:00
Randy Mackay
122623f64b
OpticalFlow - added OF_LOITER flightmode
2012-01-28 09:27:16 +09:00
Randy Mackay
2c906b7b27
OpticalFlow - replaced PI controller with PID controller.
...
Modified optical flow hold to use aggregated position instead of speed.
2012-01-25 21:55:14 +09:00
Michael Oborne
1bebb9452b
AC sync battery code with arduplane
2012-01-21 06:29:09 +08:00
Doug Weibel
ed9f7cb1b6
Update battery monitoring code for ArduCopter
...
Fixes compatibility for APM2. Also a significant update to the battery monitoring code: We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos. These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere). Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs. The CLI battery and current monitoring tests were consolidated into 1 test.
changed
2012-01-15 17:10:02 -07:00
Jason Short
dab4fb43d4
Added altitude change flags
2012-01-10 23:42:26 -08:00
Randy Mackay
f68d23d91e
ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow)
...
Removed optical flow from regular loiter for now until it's tested.
2012-01-09 13:53:54 +09:00
Jason Short
faa9dd43cf
scaled to 0-1023
2012-01-06 21:43:37 -08:00
Jason Short
b28ae04e0d
Removed unused options
2012-01-04 09:28:36 -08:00