Andrew Tridgell
3907466f9d
Plane: added TKOFF_TIMEOUT parameter
...
this allows for a timeout on auto-takeoff. This can be combined with
other takeoff parameters to allow the user to abort a hand-launch
after the motor has started without GCS interaction.
The 4m/s threshold is a bit arbitrary. We could make that a parameter
in the future if it is needed
2019-03-18 14:48:08 +11:00
Andrew Tridgell
cd1f21b806
Plane: removed some px4 specific code and docs
2019-02-27 20:32:37 +11:00
Tom Pittenger
c422a21f55
Plane: ICE to use ahrs singleton
2019-02-05 15:34:08 +11:00
Nathan E
4d7fc66657
Update parameters.cpp per magicrub comments
2019-01-23 09:24:18 -07:00
Nathan E
448d19ddbb
Update ArduPlane/Parameters.cpp
2019-01-23 09:24:18 -07:00
Peter Barker
40856fef56
Plane: remove vestiges of old PX4_MIXER code
2019-01-19 19:31:03 +11:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Michael du Breuil
ae6dc01cd5
Plane: Reset all storage when format version is incorrect
2019-01-08 10:35:37 +11:00
Michael du Breuil
a78bce32c0
Plane: Allow users to force target airspeed in cruise or fbwb
2018-12-18 22:36:55 -08:00
Nikhil Upadhye
d1e93bae83
Plane: adding new mode QAUTOTUNE
...
copter like autotune support for quadplanes and tailsitter in VTOL mode.
cleanup
2018-12-14 16:33:11 +11:00
Michael du Breuil
f3a843ebf7
Plane: Fix a comma in bitmask that was breaking emitters
2018-12-11 10:24:40 +11:00
Andrew Tridgell
1d00d26b9e
Plane: added parameters for crow flaps
...
DSPOILER_CROW_W1 and DSPOILER_CROW_W2 for inner and outer control
surfaces
2018-11-20 10:00:38 +11:00
Michael du Breuil
8ce0460daf
Plane: Remove old parameter conversion
2018-11-10 18:58:54 +11:00
Eugene Shamaev
01178a75e9
Plane: added landing gear support
2018-11-09 14:35:14 +11:00
Andrew Tridgell
d5c29fc57e
Plane: use IOMCU mixing if available
2018-11-07 07:35:45 +11:00
Michael du Breuil
1c54fa0230
Plane: Remove old battery conversion that conflicts with new monitor
2018-11-06 10:18:39 +09:00
Michael du Breuil
d9e02403e1
Plane: Fix battery failsafe parameter conversion
2018-11-06 10:18:39 +09:00
Andrew Tridgell
5ce418b4ea
Plane: added FLIGHT_OPTIONS bit for disabling pitch up check in takeoff
...
some takeoff procedures use high pitch angles
2018-10-31 18:53:36 +11:00
Andrew Tridgell
a00e06ea13
Plane: added TKOFF_ACCEL_CNT for multi-shake to start
...
this allows you to setup shake to start with a lower accel threshold,
but with multiple fwd/back movements needed.
This implements https://github.com/ArduPilot/ardupilot/issues/2221
2018-10-31 18:53:36 +11:00
Andrew Tridgell
009786a338
Plane: small update to failsafe documentation
2018-10-18 11:38:07 +11:00
Michael du Breuil
3aed07a83a
Plane: Create a scripting object
2018-10-09 10:08:52 +11:00
Michael du Breuil
b945970914
Plane: Fix FLIGHT_OPTIONS bitmask doc
2018-09-27 17:20:49 +01:00
Randy Mackay
b61b25e5bf
Plane: minor format fix to Parmeters.cpp
2018-09-11 19:34:39 +10:00
Randy Mackay
96d494c2e8
Plane: use parent AP_Arming rudder value
2018-09-11 19:34:39 +10:00
Michael du Breuil
f150cae75a
Plane: Allow center throttle to be trim airspeed in cruise
2018-09-11 09:07:00 +10:00
Peter Barker
b574f4c1fc
Plane: move support for inverted flight to rc-aux-switch
...
Functional change here; if someone de-configures the rc aux switch in
flight they will remain inverted
2018-09-07 09:07:40 +10:00
Michael du Breuil
8417bcc7d5
Plane: Add flight options bitmask
2018-08-28 09:40:53 +10:00
Andrew Tridgell
c964a393c0
Plane: fixed RC_Channels parameter docs
2018-08-04 12:28:38 +10:00
Peter Barker
9ce02bc504
Plane: minimal support for inheritting from RC_Channel
2018-08-01 12:11:30 +09:00
Andrew Tridgell
1d675390ab
Plane: make soaring an optional build feature
...
this disables soaring on px4-v2, saving 5k of flash
This is needed to consider pr #9042 , which takes a lot of flash space
2018-07-30 13:09:15 +10:00
Lucas De Marchi
7f0d5ddf21
AP_Param: stop panic()'ing on unknown parameters
...
Our track record on keeping parameters up to date with master is not
great and panic()'ing when loading them apparently is not helping
because every and each vehicle has a different file.
On aerofc load_defaults_file() is used in the same way as
load_embedded_param_defaults() is in which the panic() behavior has been
previously removed.
This finishes the removal of the panic param and add warnings to the
debug console when reading the parameters (rather than when counting
them).
2018-06-28 10:18:19 -07:00
Andrew Tridgell
bc503cc600
Plane: moved OSD to top level params
...
this is to give lots of depth for OSD params (which will be very
complex)
2018-06-27 14:55:00 +10:00
Alexander Malishev
75bf6984f5
Plane: added OSD support
2018-06-27 14:55:00 +10:00
Michael du Breuil
44f2a652f3
Plane: Remove software type param
2018-06-05 09:14:12 +10:00
Andrew Tridgell
c20351202d
Plane: document TKOFF_THR_SLEW = -1 for takeoff
2018-04-26 15:59:06 +10:00
Michael du Breuil
7405bb7b85
Plane: Support new battery failsafes
2018-03-27 22:12:21 +01:00
night-ghost
98b8a61ca8
Plane: allow AP_Stats to be optional
2018-03-02 07:23:35 +11:00
David Ingraham
a6aeebad4b
Plane: Add support for AP_Gripper
2018-03-01 14:14:43 +11:00
David Ingraham
9419cc3b32
Plane: Fix param docs for quadplane attitude control
...
Docs aren't currently being generated for plane for AC_AttitudeControl.cpp. I believe this will fix that.
2018-02-20 16:38:27 +11:00
Andrew Tridgell
31d7d9f909
Plane: change airspeed parameter prefix
...
this makes for clearer parameter names with dual sensors
2018-01-16 07:14:20 +11:00
Tom Pittenger
512b327cd4
Plane: failsafe events to use enums instead of magical numbers : Non-functional change
2017-12-07 00:19:32 -08:00
Michael du Breuil
1a3ca43e86
Plane: Don't check FS_SHORT_TIMEOUT if it's disabled
...
Also renames the check_minimum_altitude() to reflect that it's only used
for FBWB.
2017-11-24 09:58:01 -08:00
Andrew Tridgell
271373e1e8
Plane: added a not on min slew rate for throttle
2017-11-13 10:29:46 +11:00
Andrew Tridgell
126d5ce5d4
Plane: re-implement MIXING_OFFSET
...
this was lost in the conversion of SRV_Channels
2017-11-04 09:34:22 +11:00
Andrew Tridgell
6bfed07eae
Plane: updated USE_REV_THRUST docs
2017-08-30 08:46:53 +10:00
Michael du Breuil
8630037fd7
Plane: Parameterize the home altitude reset conditions
2017-08-29 13:09:46 -07:00
Andrew Tridgell
d541ac509f
Plane: removed TRIM_RC_AT_START parameter
...
this option caused a lot more problems than it solved, and is buggy
2017-08-29 07:35:49 +10:00
Peter Barker
2861c1d06a
Plane: add ArduSub to list of SYSID_SW_TYPE
2017-08-24 19:50:38 +09:00
Peter Barker
1a665280e9
Plane: remove CLI
2017-08-14 10:23:50 +09:00
Andrew Tridgell
99df31f6ec
Plane: fixes from review
...
thanks Francisco
2017-08-01 08:25:32 +10:00
Andrew Tridgell
cff692ca48
Plane: implement MANUAL_RCMASK
...
this replaces the functionality of the old "with input"
aileron/elevator functions, but in a much more flexible way. It means
that people who want to fly in MANAUL mode will have the ability to
have full control of trims and mixing using transmitter mixers if they
need that functionality
2017-08-01 08:25:32 +10:00
Andrew Tridgell
0266168e69
Plane: removed old elevon and vtail mixers
...
now only use the function based mixing, and auto-convert on startup
2017-08-01 08:25:32 +10:00
Eugene Shamaev
b95ebadf8b
ArduPlane: move of CAN parameters into separate group
2017-07-03 11:44:32 +01:00
Andrew Tridgell
51b39ea3a1
Plane: removed ancient "mix_mode" type elevon mixing
...
this has been deprecated for a long time
2017-07-03 11:17:42 +10:00
Andrew Tridgell
725244ff8a
Plane: implement new TRIM_AUTO functionality
...
this fixes TRIM_AUTO for new scaled output approach to servo functions
2017-07-03 11:17:42 +10:00
Andrew Tridgell
c9e4423997
Plane: re-implement flaperons
...
implement as scaled output instead of PWM output
this will break some peoples setups, but gives much easier setup and
more consistent behaviour
2017-07-03 11:17:42 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas
ccee841578
Plane: NFC SYS_NUM_RESETS is a read-only variable
2017-06-07 19:53:03 +09:00
Dr.-Ing. Amilcar Do Carmo Lucas
14b214eb9b
Plane: remove FS parameters default values macros.
...
They just add an un-necessary level of indirection in the code. The parameters are run-time configurable now.
2017-06-07 17:46:39 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas
405e0bb9d9
Plane: Add missing @RebootRequired: True
2017-05-27 01:55:55 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas
2f5f8eb323
Plane: Use SI units conventions in parameter units
...
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
2017-05-17 18:07:25 +10:00
Mark Whitehorn
7679b758b0
Plane: add parameter RUDD_DT_GAIN for dual motor tailsitter
...
controls rudder to differential thrust mixing in FW mode
2017-04-06 08:29:44 +10:00
Andrey Kolobov
35d406aeab
Plane: added a soaring controller to Arduplane
2017-03-14 08:53:10 +11:00
Michael du Breuil
cf10b7b841
Plane: Add support for landing PID's and servo control
2017-03-02 12:38:59 +11:00
Randy Mackay
eb746eaeef
Plane: fix SYSID_ENFORCE parameter description
2017-02-28 15:08:17 +09:00
Andrew Tridgell
0fc04b0158
Plane: setup plane frame type parameter flags
2017-02-14 19:50:01 +11:00
Peter Barker
1d7994e9ba
Plane: create GCS_Plane subclass
2017-02-13 17:03:06 +11:00
Peter Barker
d060670ba3
Plane: rename gcs[] to gcs_chan[]
...
Wish to use gcs() to return the gcs singleton
2017-02-13 09:32:01 +11:00
Michael du Breuil
7a1cbf76d3
Plane: Remove ALT_MIX
...
Closes #4998 , and fix a tab/spaces error on the previous parameter
2017-02-13 09:18:52 +11:00
Andrew Tridgell
90d9e74054
Plane: fixed parameter path
2017-02-06 15:12:32 +11:00
Michael du Breuil
2326eee9a0
Plane: Move loiter_radius to vehicle
2017-01-30 10:43:54 -08:00
murata
2492b9db7e
Plane: Unify from print or println to printf.
2017-01-27 18:20:22 +11:00
Andrew Tridgell
3338b4295e
Plane: use reload_defaults_file()
2017-01-12 17:39:37 +11:00
Andrew Tridgell
68504dbcbb
Plane: auto-upgrade old parameters for SRV_Channel split
2017-01-12 17:39:37 +11:00
Andrew Tridgell
b83f50be0f
Plane: use new SRV_Channels API
2017-01-12 17:39:37 +11:00
priseborough
38a0e8a6ae
ArduPlane: Add EKF3 and remove EKF1
2016-12-19 08:07:09 +11:00
Tom Pittenger
6544afbcba
Plane: Migrate the rest of "LAND_" params from Plane to AP_Landing
2016-11-25 19:07:30 -08:00
Tom Pittenger
bfbfc3ea3d
Plane: migrate aparm "LAND_" params from plane to AP_Landing
2016-11-25 19:07:30 -08:00
Tom Pittenger
fa991297db
Plane: create new "LAND_" param block for AP_Landing
2016-11-25 19:07:30 -08:00
Tom Pittenger
f556f705e6
Plane: move various g params to aparms
2016-11-25 19:07:30 -08:00
Tom Pittenger
0ffeed644c
Plane: remove define RANGEFINDER_ENABLED - always enabled
2016-11-25 19:07:30 -08:00
murata
0ee8edc29d
Plane: Change from printf statement to print, println statement.
2016-11-25 15:57:15 -08:00
Michael du Breuil
4dae7a6f3d
Plane: Simplify parameters
...
Remove a lot of cases where @Values and @Bitmask were encoding the same
information. @Value should only be used with @Bitmask when it is being
used to present a series of reasonable defaults that is some hybrid of
the @Bitmask fields. Enumerating each bit as 1, 2, 4, 8 is of no value.
2016-11-13 11:53:19 -08:00
Peter Barker
98ae6c776a
Plane: support for AP_Stats (flight time, bootcount, runtime)
2016-10-29 14:53:25 +09:00
Peter Barker
33b7750c7d
Plane: remove duplicate parameter metadata
2016-10-27 09:15:03 -07:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell
3a8e38ee12
Plane: added SYSID_ENFORCE parameter
...
this allows safer sharing of telemetry links between aircraft
2016-10-15 17:12:13 +11:00
Andrew Tridgell
8170df7ba8
Plane: added servo remapping object
2016-10-15 16:59:35 +11:00
Andrew Tridgell
d6890495aa
Plane: added swapped channel version of elevon/vtail/flaperon output
...
this makes it possible to setup an elevon plane without changing the
transmitter reversals
2016-09-14 11:48:05 +10:00
Andrew Tridgell
9b83781b4f
Plane: fixed mixer arming error with FMUv4
...
thanks to Tim Gold for reporting this
2016-09-11 08:25:40 +10:00
Randy Mackay
d3f8b1b846
Plane: TELEM_DELAY parameter range to 30sec
...
No functional change
2016-08-29 15:29:18 +09:00
Tom Pittenger
285e41bac6
Plane: add avoidance_adsb framework for object avoidance
2016-08-17 22:38:54 -07:00
Tom Pittenger
399fa195bb
Plane: add comment to FLTMODE param to include AVOID_ADSB
2016-08-17 22:38:54 -07:00
Andrew Tridgell
7ce7eb5a60
Plane: added Q modes to parameter docs
2016-08-16 13:15:41 +10:00
Andrew Tridgell
5d6dfd927b
Plane: changes for AP_AdvancedFailsafe naming
2016-08-16 12:55:50 +10:00
Tom Pittenger
fc50f145ce
Revert "ArduPlane: Convert references to AP_Airspeed. Added automatic migration of ARSPD_FBW_MIN and ARSPD_FBW_MAX (plane parameter) to ARSPD_FBW_MIN and ARSPD_FBW_MAX (library parameter)."
...
This reverts commit da1b18d918
.
2016-08-07 17:54:24 -07:00
Ricardo de Almeida Gonzaga
7a9fe95ccb
ArduPlane: Fix typos
2016-08-04 11:41:18 -07:00
AndersonRayner
da1b18d918
ArduPlane: Convert references to AP_Airspeed. Added automatic migration of ARSPD_FBW_MIN and ARSPD_FBW_MAX (plane parameter) to ARSPD_FBW_MIN and ARSPD_FBW_MAX (library parameter).
2016-08-04 10:09:04 -07:00
Andrew Tridgell
327a057ee0
Plane: added internal combustion engine support
...
this allows for automatic engine start and restart
2016-07-25 10:06:03 +10:00
Andrew Tridgell
3f0a8d1761
Plane: added AP_Button support for plane
...
this also adds the g2 parameter table
2016-07-22 15:01:20 +10:00
Andrew Tridgell
1256c2f351
Plane: changed for AP_Vehicle API change
2016-06-24 11:39:23 +10:00
Michael Day
cdeef9d692
Plane: Fence breaches can go to RTL mode with new FENCE_ACTION setting.
2016-06-07 15:46:52 +10:00
E Thomas
7d824247af
Differential spoilers support, elevon offset
...
Fixed differential spoilers support, added elevon offset
See PR #2935
2016-06-06 21:55:50 -07:00
Andrew Tridgell
b7fe96188d
Plane: raise range of THR_FS_VALUE
...
need to cope with reversed throttle
2016-05-21 07:39:02 +10:00
Tom Pittenger
6746b4227a
Plane: handle large negative baro offsets (corner case) to self-trigger a land-abort go-around
...
new param: LAND_ABORT_DEG
@Description: This parameter is used when using a rangefinder during landing for altitude correction from baro drift (RNGFND_LANDING=1) and the altitude correction indicates your altitude is higher than the intended slope path. Steeper slopes can result in crashes so this allows the option to remember the baro offset and self-abort the landing and come around for a another landing with the correct baro offset applied for a perfect slope. An auto-abort go-around will only happen once, next attempt will not auto-abort again. This operation happens entirely automatically in AUTO mode. This value is the delta degrees threshold to trigger the go-around. Example: if set to 5 deg and the mission planned slope is 15 deg then if the new slope is 21 then it will go-around. Set to 0 to disable. Requires LAND_SLOPE_RCALC > 0.
2016-05-17 15:41:09 -07:00
Tom Pittenger
034cd2413e
Plane: re-calc landing glide slope to gracefully handle baro offset during long flights
...
New param: LAND_SLOPE_RCALC
@Description: This parameter is used when using a rangefinder during landing for altitude correction from baro drift (RNGFND_LANDING=1) and the altitude correction indicates your altitude is lower than the intended slope path. This value is the threshold of the correction to re-calculate the landing approach slope. Set to zero to keep the original slope all the way down and any detected baro drift will be corrected by pitching/throttling up to snap back to resume the original slope path. Otherwise, when a rangefinder altitude correction exceeds this threshold it will trigger a slope re-calculate to give a shallower slope. This also smoothes out the approach when flying over objects such as trees. Recommend a value of 2m.
default value is 2 (so, enabled by default)
2016-05-17 15:39:04 -07:00
Ricardo de Almeida Gonzaga
1fad971851
ArduPlane: Fix typos
2016-05-13 19:20:07 -03:00
Andrew Tridgell
dcb24f2bc1
Plane: use DataFlash::log_while_disarmed()
2016-05-09 12:05:25 +10:00
Andrew Tridgell
35ef20b23a
Plane: use separate definition for TUNE_PARM
...
this allows the parameter docs to be separated
2016-05-08 18:35:26 +10:00
Andrew Tridgell
db5f50e08e
Plane: convert tuning to use AP_Tuning library
2016-05-07 18:34:15 +10:00
Tom Pittenger
2ba9a04bf5
Plane: smooth-out the end of takeoff pitch by reducing takeoff pitch min via TKOFF_PLIM_SEC
...
@Description: This parameter reduces the pitch minimum limit of an auto-takeoff just a few seconds before it reaches the target altitude. This reduces overshoot by allowing the flight controller to start leveling off a few seconds before reaching the target height. When set to zero, the mission pitch min is enforced all the way to and through the target altitude, otherwise the pitch min slowly reduces to zero in the final segment. This is the pitch_min, not the demand. The flight controller should still be commanding to gain altitude to finish the takeoff but with this param it is not forcing it higher than it wants to be. (+1 squashed commits)
2016-04-21 22:54:17 -07:00
Andrew Tridgell
27fb35253c
Plane: added in-flight transmitter tuning
2016-04-16 20:26:43 +10:00
Andrew Tridgell
3a242ee4a9
Plane: support up to 16 output channels
...
the extra channels can be used via SBUS output
2016-04-14 08:05:06 +10:00
Andrew Tridgell
06bcf0df4b
Plane: change default loop rate for quadplanes to 300Hz
2016-04-11 09:32:45 +10:00
Andrew Tridgell
97a7192f76
Plane: make it more obvious that AUTO_FBW_STEER is not for normal use
2016-04-06 07:58:23 +10:00
Andrew Tridgell
dd6c4d6225
Plane: fixed up parameters for quadplane
...
this fixes quadplane parameters for the new AP_Motors code
2016-04-01 16:17:07 +11:00
Lucas De Marchi
f258b66627
ArduPlane: Update path locations for parameters
...
Thanks to Francisco Ferreira for noticing that.
2016-03-23 17:50:38 -03:00
Andrew Tridgell
30ca9fbb01
Plane: cope with upgrade to shifted indexes for quadplane
2016-03-18 12:33:58 +11:00
Don Gagne
cae7ea0d13
Add @Volatile, @ReadOnly support
2016-03-17 10:58:05 +11:00
Tom Pittenger
75be40ea59
Plane: add LAND_THR_SLEW
2016-03-02 10:54:19 -08:00
Tom Pittenger
993e5b438c
Plane: add to LAND_NEUTRL behavior
...
offer netrual vs disabled outputs
2016-02-25 05:51:44 -08:00
Tom Pittenger
0b26a34f22
Plane: new param LAND_THEN_NEUTRL
...
// @Description: When enabled, after an autoland and auto-disarm via LAND_DISARMDELAY happens then set all servos to neutral. This is helpful when an aircraft has a rough landing upside down or a crazy angle causing the servos to strain.
2016-02-16 23:40:44 -08:00
Tom Pittenger
ebec68c55b
Plane: param desc to increase THR_MIN range to include negative thrust
2016-02-10 22:18:07 -08:00
Tom Pittenger
a920b7322d
Plane: more desc for param USE_REV_THRUST
2016-02-10 22:04:50 -08:00
Tom Pittenger
2e92089ce6
Plane: Reverse Thrust
...
Reverse thrust for controlled landings, even with much steeper approach slopes. This is achieved by allowing throttle demand to go negative to maintain a target airspeed. A Pre-Flare stage was added, triggered by an altitude, to allow for a slower airspeed just before land. That lower airspeed can be near stall.
new params LAND_PF_ALT, LAND_PF_SEC, LAND_PF_ARSPD, USE_REV_THRUST
2016-02-09 14:18:02 +11:00
Andrew Tridgell
125af1b856
Plane: added OVERRIDE_SAFETY parameter
2016-01-29 12:20:14 +11:00
squilter
c7e8a48a55
Plane: deploy parachute as fs action
2016-01-19 17:55:58 +11:00
Andrew Tridgell
23eef91c59
Plane: added parameter RTL_RADIUS
...
this allows the loiter radius for RTL to be controlled separately from
the radius for loiter (as requested by a user)
2016-01-19 15:04:30 +11:00
Andrew Tridgell
0d6b353bcb
Plane: added quad assistance and auto support for quadplane
2016-01-09 07:38:52 +11:00
Andrew Tridgell
6468fc6d93
Plane: Initial implementation of quadplane
...
adds "HOVER" mode
2016-01-09 07:38:52 +11:00
Andrew Tridgell
f201552f6d
Plane: always call load_all
...
this ensures defaults file works on first start after erase
2016-01-07 09:32:57 +11:00
Andrew Tridgell
7b6d862316
Plane: support up to 14 rc inputs for all boards
2016-01-04 08:22:35 +11:00
Tom Pittenger
7cde90553d
Plane: new param CRASH_ACC_THRESH
...
@Description: X-Axis deceleration threshold to notify the crash detector that there was a possible impact which helps disarm the motor quickly after a crash. This value should be much higher than normal negative x-axis forces during normal flight, check flight log files to determine the average IMU.x values for your aircraft and motor type. Higher value means less sensative (triggers on higher impact). For electric planes that don't vibrate much during fight a value of 25 is good (that's about 2.5G). For petrol/nitro planes you'll want a higher value. Set to 0 to disable the collision detector.
2016-01-02 09:58:32 +11:00
pepevalbe
9743e32f70
Plane: added group parameter for AP_Notify library
2015-12-31 11:33:05 +09:00
Andrew Tridgell
7a5808276e
Plane: fixed two build warnings with clang
2015-12-29 18:52:00 +11:00
Don Gagne
eab8a8679d
ArduPlane: fix invalid Range meta data
2015-12-27 16:10:44 +11:00
Peter Barker
574f95bd76
Plane: support multiple simultaneous backends
2015-12-03 13:21:51 +11:00
Tom Pittenger
eaad72c192
Plane: Add support for handing ADS-B traffic
...
- parse MAVLINK_MSG_ADSB_VEHICLE msg
- new 1Hz adsb_update task to compare list against for threat detection
- perform object avoidance via loiter or loiter_and_descend. More methods are welcome!
2015-11-23 19:45:40 +11:00
Andre Kjellstrup
db16b94e7f
Plane: update RTL altitude param description
2015-11-21 12:44:34 +09:00
Caio Marcelo de Oliveira Filho
c8888329e1
Plane: use millis/micros/panic functions
2015-11-20 12:26:40 +09:00
Lucas De Marchi
0151853c21
ArduPlane: remove check for MAVLINK_COMM_NUM_BUFFERS
2015-11-04 12:14:15 +11:00
Lucas De Marchi
d1be74c87e
ArduPlane: remove checks for HAL_BOARD_APM2 and HAL_BOARD_APM1
2015-11-04 12:14:13 +11:00
Lucas De Marchi
a6fd94c6fe
ArduPlane: fix wrong printf format for 32 bits
...
"micros() - before" doesn't return a long value. Use "%u".
2015-10-30 14:35:35 +09:00
Lucas De Marchi
20c6ffc5e3
Replace use of UARTDriver::printf_P() with UARTDriver::printf()
...
This also starts to show warnings on places that were already using
wrong printf format strings.
2015-10-30 14:35:25 +09:00
Lucas De Marchi
6f4904189b
Replace use of println_P() with println()
2015-10-30 14:35:22 +09:00
Lucas De Marchi
831d8acca5
Remove use of PROGMEM
...
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:
git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'
The 2 commands were done so we don't leave behind spurious spaces.
AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Lucas De Marchi
2c38e31c93
Remove use of PSTR
...
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.
This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.
AVR-specific places were not changed.
2015-10-30 14:35:04 +09:00
Andrew Tridgell
5d1d54a8cb
Plane: added CHUTE_CHAN parameter for manual release
2015-10-27 16:06:34 +11:00
Andrew Tridgell
9affddcaa3
Plane: initial support for AP_Parachute library
2015-10-27 16:06:34 +11:00
Caio Marcelo de Oliveira Filho
49a42dc985
SITL: use a SITL namespace
2015-10-22 11:04:42 -02:00
Andrew Tridgell
458e967d06
Plane: added RPM logging
...
useful for seeing if a petrol motor is still running
2015-09-24 20:58:18 +10:00
Andrew Tridgell
91f990af06
Plane: added EKF2 to parameters as EK2_*
2015-09-23 11:56:37 +10:00
Randy Mackay
6da53ae3b2
Plane: replace SKIP_GYRO_CAL with INS_GYR_CAL
...
Also calibrate gyros with accel cal and set trim
2015-09-21 17:06:43 +09:00
Grant Morphett
9a76f0ecf0
Plane: Fixing FS_SHORT_ACTN parameter doco
...
This is to resolve wiki issue 146
https://github.com/diydrones/ardupilot-wiki-issue-tracker/issues/146
2015-09-16 09:35:38 +09:00
Grant Morphett
6b22a59eff
Plane: Fixing up the ARMING_ parameters autogen doco
2015-09-15 14:11:15 +09:00
Andrew Tridgell
953efa9b6c
Plane: fixed parameter docs for LAND_ABORT_THR
...
it should be a values list
2015-09-09 09:08:59 +10:00
Tom Pittenger
25da4ec0ea
Plane: added flight stage FLIGHT_LAND_ABORT and abort mechanism
...
- enabled via new param LAND_ABORT_THR default is 0 (disabled)
- Triggered via 95% throttle during landing, a landing abort will take place.
- This copies all takeoff params for right now, we can make this better later if needed
- added mission item command to NAV_LAND which is the abort takeoff altitude. If 0 then use last takeoff if available, else use 30m
- hold heading, just like takeoff, until altitude is reached
- pitch is constrained to takeoff pitch, or else 10deg if not available
- After abort altitude is reached, the normal landing restart happens (DO_LAND_START or decrement mission)
- restart landing by jumping to DO_LAND_START or decrement mission on mode change
2015-09-09 09:04:24 +10:00
Grant Morphett
e734e9745d
Plane: TKOFF_TDRAG_SPD1 is needed if holding nose wheel down.
...
Just clearing up the documentation as per this wiki issue
https://github.com/diydrones/ardupilot-wiki-issue-tracker/issues/138
2015-09-08 17:31:09 +10:00
Grant Morphett
3cb0c1bba8
Plane: Move the plane centric arming code into arming_checks.cpp
...
Needed to move the plane centric arming code out of the AP_Arming
library and into the plane vehcile code.
2015-09-07 11:54:21 +10:00
Stewart Loving-Gibbard
722dd29370
Plane: Moving to RSSI library for reading various kinds of RSSI, with the possibility of adding more.
...
* Retains ability to read from Analog Pin
* Adds ability to read RSSI from PWM channel value as is done in OpenLRSng, EazyUHF, and various other LRS.
* Handles any type of RSSI that provides RSSI values inverted - i.e. when the low value is the best signal and the high value is the worst signal.
* Has different key names from all existing RSSI parameters to provide for a clean break and easier distinguishing.
* Existing parameters are marked as obsolete
2015-08-29 08:05:59 +10:00
Randy Mackay
e4c62811ea
Plane: fix link to BATT parameter descriptions
2015-08-26 11:17:55 +09:00
Tom Pittenger
da8f4f9e95
Plane: reworked is_flying
...
add crash detection, allow disengage via param CRASH_DETECT
improved is_flying behavior
take off, landing and hard-landing improvements
add stillness check to is_flying and log it
minimum airspeed is determined ARSPD_FBW_MIN*0.75
2015-08-23 10:34:18 +10:00
Stewart Loving-Gibbard
eb2ca91f1c
Plane: Fixing unambiguous spelling errors in Parameters.cpp file.
...
These are user-visible in Mission Planner and the like.
2015-08-18 17:16:19 +10:00
Andrew Tridgell
6186b7a453
Plane: disable TRIM_RC_AT_START by default
2015-08-15 19:13:30 +10:00
Andrew Tridgell
6c07795b63
Plane: added HIL_SUPPORT define
...
disable HIL support on APM2 to save flash space
2015-07-30 11:04:31 +10:00
Lucas De Marchi
e97034f8e9
ArduPlane: use ARRAY_SIZE macro
2015-07-07 07:56:30 +10:00
Andre Kjellstrup
3e84132f6b
GCS_Failsafe: new parameter option
2015-06-18 07:52:42 +10:00
Michael Oborne
7dcd24137e
Plane: add bitmask documentation
2015-06-05 10:21:21 +09:00
Andrew Tridgell
9adc879253
Plane: changes for new AHRS API
2015-06-01 16:16:49 +10:00
Andrew Tridgell
09476bf9d3
Plane: added GCS_PID_MASK for realtime pid tuning
2015-05-27 14:28:46 +10:00
Andrew Tridgell
8974c879fe
Plane: fixed paths for GCS_MAVLink parameter file
2015-05-21 11:42:45 +10:00
Andrew Tridgell
554869033f
Plane: disabled rangefinder on APM2
...
this saves 5k of flash space, enough for support to be kept for
another release
2015-05-21 07:48:53 +10:00
Andrew Tridgell
b92c2409e4
Plane: added local millis() and micros() to reduce code size a bit
2015-05-21 07:48:53 +10:00
Andrew Tridgell
150af130ee
Plane: get closer to making var_info appear in text segment
2015-05-21 07:48:52 +10:00
Andrew Tridgell
18c37935c9
Plane: convert from .pde to .cpp files
2015-05-21 07:48:52 +10:00