Jason Short
7f3e142fa8
Loiter Gains based on new SIM
2012-05-15 22:01:01 -07:00
Robert Lefebvre
c8fb9a6635
More CopterLEDS changes.
...
Merged CopterLEDS and Piezo functions to eliminate pin conflict on APM2. Created new Parameter bit to turn piezo function on and off from MP. Moved GPS and Aux pin assignments to allow commonality between APM1 and 2. Set LED_Mode parameter default to 9 in order to make CopterLEDS completely backwards compatible with old Motor LEDS and Piezo code. Legacy users should see no difference.
2012-05-15 12:00:21 -04:00
Robert Lefebvre
a285e2779f
CopterLEDS changes for APM2
2012-05-15 10:07:03 -04:00
Adam M Rivera
8e580729b7
config.h: Removed comment.
2012-04-23 00:16:41 -05:00
Adam M Rivera
97040a7b3a
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach
2012-04-23 00:03:37 -05:00
rmackay9
090f5aaa6f
ArduCopter - config.h - set standard RC_SPEED to 125 for helicopter frame
2012-04-21 23:46:36 +09:00
rmackay9
919f004b27
ArduCopter - changed Optical Flow for APM2 to use A3 pin
2012-04-21 20:15:16 +09:00
Adam M Rivera
c233defbe6
Merge branch 'retro-loiter' of https://code.google.com/r/a432511-wip into auto-approach
...
Conflicts:
Tools/ArdupilotMegaPlanner/Common.cs
2012-04-19 11:08:34 -05:00
Adam M Rivera
24363ccb83
Merge branch 'master' of https://code.google.com/p/ardupilot-mega into retro-loiter
2012-04-19 10:17:36 -05:00
Adam M Rivera
d29f1ef331
Loiter: Made the "retro loiter" routines configurable. Add RETRO_LOITER_MODE ENABLED to APM_Config.h to enable the older loiter shtuff.
2012-04-19 10:16:29 -05:00
James Goppert
0e7e77760a
Updated ArduPlane/ArduCopter cmake options.
2012-04-18 15:16:02 -04:00
Adam M Rivera
7b277d7044
config.h: Added RTL_APPROACH_DELAY config value.
2012-04-16 14:00:08 -05:00
rmackay9
84b07b5e6a
ArduCopter - LEDS - added new COPTER_LEDS definition
...
Code by Robert Lefebvre
2012-04-12 22:55:32 +09:00
Andrew Tridgell
0bc604f030
ACM: removed FORCE_AUTOMATIC_DECLINATION_UPDATE
...
we now have the EEPROM option COMPASS_AUTODEC instead
2012-03-30 14:25:27 +11:00
Adam M Rivera
51b70e4d36
ArduCopter: Changed implementation of configuration value for automatic declination. There is now a FORCE_AUTOMATIC_DECLINATION_UPDATE that when enabled will update the declination on every GPS 3D fix regardless of whether or not the user saved a value to the EEPROM. By default the declination will only be set by the automatic declination routine if the user has not saved a declination to the EEPROM.
2012-03-30 14:25:06 +11:00
rmackay9
1f4cfb9333
ArduCopter - added PID log type. Implemented for Yaw stabilize and rate controllers.
2012-03-25 16:09:08 +09:00
Jason Short
e2560c5865
Throttle_hold was in APM_Config - which is ignored by the Mission planner Hex generator
2012-03-22 10:01:24 -07:00
rmackay9
0773a25b5d
ArduCopter - increased default THROTTLE_CRUISE to 450
2012-03-20 16:34:07 +09:00
rmackay9
dc92da818c
ArduCopter - remove reference to AUTO_RESET_LOITER that is not used anymore
2012-03-18 14:53:19 +09:00
Jason Short
491af02d8a
ACM: Lowered gains from flight tests today with 3DR Quad
2012-03-17 11:04:01 -07:00
Jason Short
3038da1dc3
ACM: Softer Loiter Gains
2012-03-16 14:10:19 -07:00
Jason Short
a52a14bf12
Tune down Loiter_P a hair
2012-03-15 19:17:27 -07:00
Jason Short
48ba24a810
ACM: Loiter tuning updates, turned up I a bit, a higher I will work better if the system is well tuned.
2012-03-13 10:23:31 -07:00
Jason Short
7034b709d1
ACM: removing old define
2012-03-12 13:11:30 -07:00
Jason Short
0b51d9b8b0
ACM: Made Loiter_D 0 by default. Accidentally left it on by default.
2012-03-12 10:37:15 -07:00
Jason Short
a989b88680
ACM: made same as Loiter I
2012-03-11 23:21:49 -07:00
Jason Short
0d434ca92c
ACM: Tuning based on flights today
2012-03-11 23:21:49 -07:00
Adam M Rivera
2524f9c8df
AP_Declination: Added new config value to allow the user to have the declination overwritten on every 3D fix.
...
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00
Jason Short
83729d0f75
ACM: decreased rate P for alt hold to remove bumpy repsonse
2012-03-10 12:41:06 -08:00
Jason Short
220d5a1c6e
ACM: Increased the altitude error P for smoother alt hold response
2012-03-10 12:40:44 -08:00
Jason Short
4b703e8842
decreased the loiter rate P for overshoot
2012-03-10 12:40:07 -08:00
Andrew Tridgell
7e4c8592ff
ACM: make it possible to build ArduCopter with quaternions
2012-03-10 10:34:29 +11:00
Jason Short
730476fdfd
ACM -
...
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
2012-03-06 22:22:14 -08:00
Jason Short
c26eb6afcc
ACM: Updated config values
2012-03-06 22:12:24 -08:00
Andrew Tridgell
0fc646d666
ACM: set default RC fast speed to 400Hz
2012-03-02 17:57:08 +11:00
Jason Short
7c09e4a5e6
added stab_d gain scheduling - off by default
2012-02-28 20:16:40 -08:00
Jason Short
ba68d6d8a1
Set loiter rate enabled by default
2012-02-26 12:29:28 -08:00
Jason Short
e06d8142c1
Added OPtion for non-rate based loiter
2012-02-26 11:33:37 -08:00
Jason Short
cc5ab4aebf
increased speed of alt hold I term based on Jani's Logs
2012-02-25 13:31:21 -08:00
Jason Short
385828824d
updated Gains for Marco's loiter test
2012-02-23 22:03:26 -08:00
Jason Short
885710fce6
updated max throttle define
2012-02-18 21:14:13 -08:00
Jason Short
1b46daa12e
some better defaults for JDrones
2012-02-18 14:23:21 -08:00
Jason Short
b052dab80d
Adjusted gains to move closer to Marco's tests
2012-02-16 22:19:39 -08:00
Jason Short
3d63bb6cd4
Added acro_p to the params
2012-02-15 11:29:25 -08:00
Jason Short
21856e7696
new defaults for params
2012-02-15 09:10:15 -08:00
Jason Short
4faba2048c
Lowered for Jani
2012-02-13 15:25:23 -08:00
Pat Hickey
470fd8788e
ArduCopter Channel Config: config vars for user override of MOT_n mapping
...
* config variable CONFIG_CHANNELS has possible values
CHANNEL_CONFIG_DEFAULT or CHANNEL_CONFIG_CUSTOM
* config_channels.h only provides APM1/APM2 mapping when
CONFIG_CHANNELS == CHANNEL_CONFIG_DEFAULT
2012-02-11 16:05:51 -08:00
Jason Short
0a63f104ab
Gain adjustments for 3d frame.
2012-02-11 15:29:11 -08:00
Jason Short
dc15fe4c5d
Moved to Rate_I by default for Jani to test
2012-02-10 22:32:55 -08:00
Jason Short
50aaa09348
Up Nav_Rate_P
2012-02-09 22:38:36 -08:00