Commit Graph

253 Commits

Author SHA1 Message Date
Michael Oborne 28d280562a apm 1280 disables 2011-12-16 22:26:39 +08:00
Andrew Tridgell 42522baf9f geofence: store fence points as int32_t
this keeps maximum precision in fence boundaries
2011-12-16 20:11:51 +11:00
Andrew Tridgell fc495ce6a7 geofence: added fence status reporting and faster altitude check 2011-12-16 20:11:51 +11:00
Andrew Tridgell 64ae2ebec5 geofence: don't trim control surfaces on geo-fence breach
the user input is likely to be bad
2011-12-16 20:11:51 +11:00
Andrew Tridgell 3b148c87d5 geofence: main geo-fence code
this implements the primary logic of geo-fencing
2011-12-16 20:11:51 +11:00
Andrew Tridgell 82b615df50 geofence: added geo-fencing control parameters 2011-12-16 20:11:51 +11:00
Andrew Tridgell 960d6ee38a removed an unused variable 2011-12-16 20:09:49 +11:00
Andrew Tridgell 84a694efb9 only check for "enter 3 times" in first 20s after boot
we don't want stray bytes on serial3 to make us enter the CLI during
flight!
2011-12-16 20:09:32 +11:00
Doug Weibel ca89857854 Changes to logging file system to avoid problems with 0 and 1 page logs 2011-12-13 20:09:07 -07:00
Andrew Tridgell 1998908a05 DCM: reset the DCM matrix after a ground start 2011-12-13 21:33:07 +11:00
Andrew Tridgell 8cd13749bd MAVLink: fixed link flood on waypoint upload 2011-12-13 20:39:04 +11:00
Andrew Tridgell dd9f3a3fa6 fixed a hang on 2nd run of IMU test
we should not try to initialise the ISR handlers twice
2011-12-13 18:28:50 +11:00
Andrew Tridgell 483bef35e5 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Andrew Tridgell 888d6226b2 fixed two more CONFIG_HARDWARE #ifdef bugs 2011-12-13 17:05:48 +11:00
Andrew Tridgell 07dba4eff7 desktop: fixed Wire.begin() build problem 2011-12-12 15:14:55 +11:00
Andrew Tridgell 78e8fbff9c fixed hardware config check for barometer 2011-12-12 15:14:55 +11:00
Andrew Tridgell 1b1c629167 added sitl build target 2011-12-12 15:14:55 +11:00
Andrew Tridgell 2bd18e937c throttle: only use throttle slew in auto throttle modes
we don't want STABILISE and FBWA to have throttle change limits
2011-12-12 15:14:55 +11:00
Andrew Tridgell 0a7332b6e3 airspeed: smooth the airspeed value a bit more
the value is very noisy in my tests. A bit more smoothing may help
2011-12-12 15:14:55 +11:00
Andrew Tridgell 011110e1dd airspeed: use floating point values and better averaging in zero_airspeed()
this makes the calibration of airspeed a bit more accurate, and
prevents truncation of airspeed values
2011-12-12 15:14:55 +11:00
Andrew Tridgell d5c23c83cf apm2: fixed for new barometer code 2011-12-11 15:21:10 -08:00
Pat Hickey a99a1dbc9a ArduPlane: update AP_Baro construtors and initializers 2011-12-11 15:21:10 -08:00
Pat Hickey f3ad7f3af8 Wire and SPI Init: move to sketch system.pde from libraries
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
2011-12-11 15:21:10 -08:00
Pat Hickey d7f77aec93 ArduCopter & ArduPlane: Added support for apm2beta build via APM2_BETA_HARDWARE define
* This enables the BMA085 driver for compatibility with beta boards.
* The CLI_SLIDER_ENABLED=DISABLED line does not need to be in the makefile.
  config.h takes care of this default.
2011-12-11 15:21:09 -08:00
Pat Hickey 1b2ebdff44 ArduPlane: added config.h and defines.h to support CONFIG_BARO 2011-12-11 15:21:09 -08:00
Pat Hickey 04ea979331 ArduPlane: Rename APM_BMP085 classes to AP_Baro_BMP085 classes 2011-12-11 15:21:09 -08:00
Pat Hickey f2652d23bf ArduPlane: calibrate accel with imu.init_accel after imu.init
* complements commit 73418559, where init_accel was eliminated
  from AP_IMU_INS::init cold start.
2011-12-10 13:32:47 -08:00
Doug Weibel 2ef4c79a7c Minimum ground speed patch from Claudio Natoli. Thanks Claudio!
This patch will boost the target airspeed as necessary to keep the ground speed above a parameter value - param_min_groundspeed.  Airspeed is still limited to FBW-max.  Setting min_groundspeed to zero (default) disables the feature.
2011-12-09 16:43:25 -07:00
Doug Weibel 2f962fe6da Augment failsafe gcs_send_text message 2011-12-09 09:11:45 -07:00
Doug Weibel 502a98dda1 Add hook to dump log filesystem index for debugging 2011-12-07 08:13:30 -07:00
Andrew Tridgell 39a36fe946 fixed the "reboot on GPS lock" bug
the problem was that with APM2 we may not have a 2nd GCS instance. The
"gps alt: xxx" message was being unconditionally sent to both GCS
instances, which caused a crash
2011-12-04 09:06:58 +11:00
Andrew Tridgell 4a057aefa0 test: removed the broken gyro test and merge it into the imu test
the gyro test assumed APM1 hardware, and would hang on APM2. The imu
test can just as easily display gyro and accelerometer data as well as
roll/pitch/yaw, so combine it in one test
2011-12-03 14:08:20 +11:00
Doug Weibel 88ab4f7d70 Fix for intermittent bug of log #1 starting on page 2 and confusing file system 2011-11-28 19:43:10 -07:00
Doug Weibel b03de3095e Add DataFlash.Init before doing a forced log erase on eeprom reset.
Add progress indication during log erase
2011-11-28 19:42:27 -07:00
Andrew Tridgell 2cabb11307 mavlink: don't force CLI and HIL with mavlink10 build 2011-11-28 16:22:33 +11:00
Andrew Tridgell 838c57cd1a mavlink: paranoia setting of failsafe when forcing AUTO mode
this shouldn't be needed, but will do no harm, and I thought I saw
this fail in a test
2011-11-28 16:22:33 +11:00
Andrew Tridgell 4036604fb7 mavlink: move Mavlink_compat.h to common code
this will allow it to be used by ArduCopter
2011-11-28 13:53:57 +11:00
Andrew Tridgell 5ae929ace9 build: CLI_SLIDER_ENABLED doesn't need to be forced off in apm2 build
this is handled by config.h now
2011-11-28 13:53:57 +11:00
Doug Weibel 7960e7963c Add Guided mode to failsafe handling 2011-11-26 21:10:53 -07:00
Andrew Tridgell a048709828 Logs: don't print hundreds of bogus log boundaries
this can take quite a long time
2011-11-26 17:02:55 +11:00
Pat Hickey ab56a764d3 ArduPlane: rev version number from 2.26 to 2.27 Alpha 2011-11-25 20:00:19 -08:00
Pat Hickey f7a9b8a563 ArduPlane: LED digital writes use LED_OFF and LED_ON 2011-11-25 20:00:19 -08:00
Andrew Tridgell 86927ac0a5 ArduPlane: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell 7def0e98e8 USB-MUX: auto-switch telemetry port based on UXB mux for ArduPlane
when USB is unplugged, switch baud rate to the SERIAL3_BAUD rate from
EEPROM
2011-11-25 20:00:19 -08:00
Andrew Tridgell ffba37d599 desktop: first version of register level SITL support
this adds register level emulation of the ADS7844 and the RC
input/output hardware on the APM1, allowing for SITL testing without
enabling HIL in the code
2011-11-25 20:00:18 -08:00
Andrew Tridgell 3a0b1d1903 purple: there are no dipswitches on the purple board 2011-11-25 20:00:18 -08:00
Andrew Tridgell 6093db948b compass: added AP_COMPASS_APM2_SHIELD
this makes the orientation clearer
2011-11-25 20:00:18 -08:00
Andrew Tridgell 649da8e05d purple: adc test not useful if no ADC 2011-11-25 20:00:18 -08:00
Andrew Tridgell 40459653b5 purple: fixed LED and IO pin defintitions 2011-11-25 20:00:18 -08:00
Andrew Tridgell ca76f6d0ec purple: add the remaining hw defines for purple hardware 2011-11-25 20:00:18 -08:00
Andrew Tridgell 1e41b4b2b0 timer_scheduler doesn't exist in HIL_MODE_ATTITUDE 2011-11-25 20:00:18 -08:00
Andrew Tridgell a3701e521a build: added hlsensors target 2011-11-25 20:00:18 -08:00
Andrew Tridgell 1c20efe4b8 re-organiser sensor declarations
this tries to make the #ifdef nesting easier to understand
2011-11-25 20:00:17 -08:00
Andrew Tridgell 3d175c449e adc.Init() takes timer_scheduler 2011-11-25 20:00:17 -08:00
Andrew Tridgell 03c7d7bfb6 purple: always declare timer_scheduler 2011-11-25 20:00:17 -08:00
Pat Hickey 1895458dbf purple: added new parameters to Init() functions
this adapts the test code for the purple API changes
2011-11-25 20:00:17 -08:00
Pat Hickey f9d6facdda test: added new passthru test
this passes radio inputs direct to servo outputs, which is useful for
hardware testing
2011-11-25 20:00:17 -08:00
Pat Hickey bad177bfdc removed old commented out code 2011-11-25 20:00:17 -08:00
Pat Hickey ad0cac670c purple: added new parameters needed for new library APIs
new APIs pass in timer_scheduler. We also to init the isr_registry
2011-11-25 20:00:17 -08:00
Pat Hickey 4015cb0a40 purple: fixed APM_RC.Init() to add isr_registry parameter 2011-11-25 20:00:17 -08:00
Pat Hickey 9e47536924 purple: declare sensors for purple library rework
we need some different declarations to match the new APIs
2011-11-25 20:00:17 -08:00
Pat Hickey 08675a91d8 purple: added config options for purple/APM1 hardware 2011-11-25 20:00:17 -08:00
Pat Hickey 3300032a89 purple: added hardware defines for ArduPlane 2011-11-25 20:00:17 -08:00
Pat Hickey cc67062442 build: added new command line build targets
this makes it more convenient to build common options
2011-11-25 20:00:16 -08:00
Andrew Tridgell 89d2f0f849 mod barometer.Init() based on hardware 2011-11-25 20:00:15 -08:00
Michael Oborne 0a0b2d32f4 Add rc input to cli planner mode 2011-11-26 11:23:14 +08:00
Doug Weibel b05e1d90f5 Change type to support "dump all with -1" 2011-11-24 18:55:33 -07:00
Doug Weibel 0f428bd43a Logging cleanup. Fixed missing cast, removed erase warning, added -1 to dump all option, and fix intermittent bug for log number 1. 2011-11-24 18:55:33 -07:00
Doug Weibel 27e68234b7 Simplified logging logic for finding start/end of log files 2011-11-24 18:55:32 -07:00
Doug Weibel 244eeea34a Rework logging file system to be more robust 2011-11-22 20:20:17 -07:00
Andrew Tridgell 8ef364657b MAVLink: fixed throttle display in VFR_HUD 2011-11-21 20:29:19 +11:00
Andrew Tridgell 4933c5bcdd zero airspeed on ground start when initiated by MAVLink
If the users asks for a new calibration, that should include the
airspeed sensor
2011-11-21 20:29:18 +11:00
Andrew Tridgell faaaf11822 fixed disabling of GPS in ArduPlane
we may need a new hex
2011-11-21 20:29:18 +11:00
Andrew Tridgell 9ea0fc9539 Log: prevent looping forever
this happened with an empty dataflash
2011-11-20 19:06:24 +11:00
analoguedevices b3716d988f Rev version number 2011-11-19 23:43:47 +00:00
Jason Short 7ffa2c4347 shortened strings 2011-11-19 14:02:45 -08:00
Doug Weibel 88f5669104 Remaining changes to the logging file system.
With these changes the logging system will allow overwriting of logs with no loss of functionality.  I have tested (successfully) logging with the Dataflash being filled and overwriting previous files.  I have also tested with a single long file that partially overwrites itself.
2011-11-17 21:25:51 -07:00
Doug Weibel f752c4b799 Change to logging file system.
This commit is somewhat temporary as I have come up with a better scheme and will be modifying this.  Just making this commit in case I need to roll back
2011-11-17 21:25:51 -07:00
Jason Short ddd89e1849 Mission Scripting updates 2011-11-16 00:22:23 -08:00
analoguedevices 7535b8a3d5 Rev version number 2011-11-16 05:04:36 +00:00
Doug Weibel e6542ec1a2 Fix Do_Jump bug. Also fix cross track bearing bug after Jump 2011-11-15 20:44:19 -07:00
Doug Weibel 0433cd6d69 Missed hunk for last commit 2011-11-15 20:43:00 -07:00
Doug Weibel 9fe554236b Add logging of DCM drift correction integrator in PM
This may be a temporary feature…  Mostly added to check new (lower) integrator limit.
2011-11-15 20:42:59 -07:00
analoguedevices e3ef9a2a36 Rev version number to 2.25 2011-11-14 05:31:27 +00:00
Michael Oborne 31159a7e1b modify crosstrack calc 2011-11-13 08:25:24 +08:00
Andrew Tridgell 407d66b41e fixed a valgrind warning
need to initialise all fields
2011-11-08 17:26:53 +11:00
Andrew Tridgell 92471aead2 Log: better way to check for -1 long portably 2011-11-08 07:58:34 +11:00
Andrew Tridgell 2bd451b445 Log: make find_last_log_page() portable
this makes it work with platforms with a larger 'long'
2011-11-07 23:50:49 +11:00
Andrew Tridgell ae1e1c940f Log: fixed a bug where we could index outside an array
when we first start up, num_existing_logs may be zero
2011-11-07 22:56:13 +11:00
Jason Short c8304114a3 renamed some command variables to align with Arduplane
reworked the arming code and moved the DCM gains out.
updated climb_rate to include sonar data.
2011-11-04 21:41:51 -07:00
Amilcar Lucas ab730ff919 Added camera and/or antenna mount support.
It is fully configurable with the mission planner, there is no need to change
the source code to adapt to your setup.
It needs more testing, but the SIL is not working for me.
2011-10-31 22:55:58 +01:00
Andrew Tridgell 9eb27c2573 GCS: fixed timeout loading waypoints
while loading waypoints we could saturate the link
2011-10-31 21:25:35 +11:00
James Goppert 9d278ab355 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-30 23:12:53 -04:00
James Goppert 3f8603331d Switching to new eclipse project style. 2011-10-30 22:57:34 -04:00
Michael Oborne c07d56ccbf Revert Changes
switch back to old nav_rol lcalc
switch back to old planner - non mavlink 1.0
2011-10-31 07:23:20 +08:00
Michael Oborne 3f3c04f95b Add MAVLINK_MSG_ID_HIL_STATE message 2011-10-30 18:17:37 +08:00
Michael Oborne ccd51fea2c Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-10-30 14:27:13 +08:00
Andrew Tridgell d9ae4e4e6e MAVLink: use new MAV_MODE_FLAG_CUSTOM_MODE_ENABLED flag
this enables us to tell if custom_mode is set
2011-10-30 13:00:54 +11:00
Andrew Tridgell e722126843 fixed uninitialised variable warning 2011-10-30 11:48:56 +11:00
Andrew Tridgell 580647b1de use C++ tricks to minimise differences for MAVLink 1.0
this should make maintainence/testing a bit easier
2011-10-30 11:48:56 +11:00