Commit Graph

1232 Commits

Author SHA1 Message Date
Peter Barker d24e569b20 GCS_MAVLink: add option to panic the autopilot 2021-01-05 10:04:25 +11:00
Peter Barker b8827e6486 GCS_MAVLink: allow control to be return to radio for higher-numbered RC_CHANNELS_OVERRIDE 2020-12-29 15:03:34 +11:00
Peter Barker 6f4bbd3f57 GCS_MAVLink: for high RC_CHANNELS_OVERRIDE channels zero means ignore the field 2020-12-29 15:03:34 +11:00
Andrew Tridgell e6c5382a28 GCS_MAVLINK: fixed FPE in DO_SET_ROI
this prevents a floating point exception when MissionPlanner sends an
invalid DO_SET_ROI

See https://github.com/ArduPilot/MissionPlanner/issues/2528
2020-12-28 11:53:03 +11:00
Dr.-Ing. Amilcar do Carmo Lucas d76825feeb GCS_MAVLink: adapt to upstream changes in the distance_sensor mavlink message 2020-12-19 19:54:03 +11:00
Andrew Tridgell 6df118e7b4 GCS_MAVLink: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas 1d0e7d2974 GCS_MAVLink: Added cells 11...14 voltage information (13 and 14 are 0 for now) 2020-12-11 06:37:32 +11:00
Andrew Tridgell 5e3bf0a703 GCS_MAVLink: implement BRD_OPTIONS bit for setting of internal parameters 2020-12-08 13:22:17 +11:00
Andrew Tridgell 8b5ff1a6de GCS_MAVLink: enable GCS_SEND_TEXT() to send as CAN LogMessage messages 2020-12-04 15:16:21 +11:00
Peter Barker 88895f9b13 GCS_MAVLink: stop using one backend's signing structure for all backends 2020-11-30 14:11:08 +11:00
Gone4Dirt caf1ad28d5 GCS_Common: AP_Generator_Richenpower is now AP_Generator 2020-11-24 12:54:52 +11:00
Peter Barker f0c22244a5 GCS_MAVLink: correct response codes when mode change fails
Was "UNSUPPORTED", which is supposed to mean, "Command is not supported"

Now is either "DENIED" (Command is invalid (is supported but has invalid
parameters)) or "FAILED" (Command is valid, but execution has failed.)

We should probably returned DENIED if we try to change to a mode which
doesn't exist, but that would require another callback on AP_Vehicle.
It would also lead to questions around what a valid mode is - so
QSTABILIZE if quadplane is disabled in Plane, for example.
2020-11-24 10:09:37 +11:00
Hwurzburg 6eca18c08b GCS_MAVLink: add Board option to disable MAVftp in low mem bds/apps 2020-11-17 10:41:59 +11:00
Andrew Tridgell 9c74474196 GCS_MAVLink: setup baudrates for passthru serial ports 2020-11-17 10:26:14 +11:00
Peter Barker 41943f5fda GCS_MAVLink: correct use of uninitialised value in Rally upload 2020-11-11 18:22:58 +11:00
Andy Piper 4d1c660ebc GCS_MAVLink: enable OSD parameters on parameter enablement 2020-11-11 18:13:11 +11:00
Andrew Tridgell 147df12eb8 GCS_MAVLink: allow replay to use GCS_Dummy 2020-11-10 16:15:45 +11:00
Tatsuya Yamaguchi e1126d4fd6 GCS_MAVLink: use micro64 instead of micros for time_usec 2020-10-27 15:37:29 +11:00
Iampete1 73594cb19b GCS_MAVLink: send airspeed temp in scaled_pressure 2020-10-27 11:24:49 +11:00
Peter Barker 74f75dcd31 GCS_MAVLink: fill AUTOPILOT_VERSION.uid2 from get_system_id_unformatted 2020-10-21 18:26:12 +11:00
Peter Barker 7c8df47ac9 GCS_MAVLink: process messages sent to broadcast system
.... even if we've forwarded them to someone else.
2020-10-21 18:22:48 +11:00
Peter Barker d3ba7a8409 GCS_MAVLink: don't learn a route to the broadcast component
Using a component ID of 0 for your source is invalid according to
common.xml

However, some clients do use it.

This stops us learning a route to that client for the broadcast client
for our own system ID.
2020-10-21 18:22:48 +11:00
murata 6304ade668 GCS_MAVLink: Change to leave the lower 16 bits. 2020-10-13 12:06:18 +11:00
Andrew Tridgell e346cd3c80 GCS_MAVLink: fixed use of incorrect millis16() values 2020-10-12 13:48:15 +11:00
Peter Barker 45f7322af6 GCS_MAVLink: avoid catching up on sending messages when sending disrupted
The code here was never meant to maintain an "average" streamrate.  It
was designed so that we would maintain a consistent clock in the face of
minor scheduling anomalies (like an EKF fusion step).

The way this is written, however, makes us spit out a message for each
of the intervals we missed - clearly not intended behaviour.

This was tested by inserting the following code:

 void GCS_MAVLINK::update_send()
 {
+    const uint32_t xnow = AP_HAL::millis();
+    if (xnow > 10000 &&
+        xnow < 20000) {
+        return;
+    }
+
2020-10-12 13:48:15 +11:00
Patrick José Pereira 8701e3626d GCS_MAVLink: Update GCS_Dummy to use new AP_FWVersionDefine header
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-10-07 19:32:12 +11:00
Peter Barker 7cb8cde417 GCS_MAVLink: move orderly rebooting code from GCS into AP_Vehicle
Several places we reboot the vehicle we should probably do several of
the things done in this code - flushing parameters, forcing safety on
etc.
2020-09-29 18:07:59 +10:00
yaapu e7a49dd624 GCS_Mavlink: refactor zero_rc_outputs() out of GCS_Mavlink 2020-09-29 18:07:59 +10:00
Peter Barker 0c88af99da GCS_MAVLink: revert removal of private channel check when forwarding
This reverts 6dc77c97ce

The commit caused a regression on Solo as the gimbal is "nodding",
indicating traffic from the autopilot is getting through to the gimbal.
2020-09-25 09:42:27 +10:00
Andy Piper 5d487be242 GCS_MAVLink: squash enum type error 2020-09-22 09:37:02 +10:00
Andy Piper 8b766efb0a GCS_MAVLink: add support for updating OSD parameters over mavlink 2020-09-09 20:36:42 +10:00
Andrew Tridgell 74686f8dc4 GCS_MAVLink: fixed locking of mavlink in serial control
this fixes takeover of mavlink ports for high serial numbers
2020-09-08 09:01:16 +10:00
Sharvashish Das 80e2dbc9f2 GCS_Common: send_local_position uses offset from origin 2020-09-01 10:27:18 +10:00
Andrew Tridgell 30f9fd9d2a GCS_MAVLink: fixed overrun of text passed to other libraries
this caused corruption in log files, and was passing a
non-nul-terminated string to notify and other libraries
2020-08-28 17:35:17 +10:00
Siddharth Purohit 42f5f986d8 GCS_MAVLink: use AP_CANManager library
also add support for handling enumeration cmd by KDETest
2020-08-19 17:31:09 +10:00
Peter Barker 0e284b95b0 GCS_MAVLink: move battery type enumeration out of parameters object 2020-08-11 13:21:52 +10:00
Michael du Breuil 6dc77c97ce GCS_MAVLink: Remove redundant check for private channels
We can't learn the route for sending to a private channel, so we
shouldn't need to actually check it when iterating the routes.
2020-08-11 09:49:42 +10:00
Randy Mackay 1a3ef62b84 GCS_MAVLink: add virtual send_winch_status 2020-08-07 21:55:07 +09:00
Siddharth Purohit 1a08252504 GCS_MAVLink: add support for bank selection on SPI DEVICE_OPs 2020-08-06 12:41:35 +10:00
elhayra 9b3a574775 GCS_MAVLink: sending UAVCAN MAVlink ESC messages 2020-08-06 09:28:35 +10:00
Andy Piper e91ae19544 GCS_MAVLink: make mount/gimbal configurable on a per-board basis 2020-08-04 09:18:14 +10:00
Dr.-Ing. Amilcar do Carmo Lucas 7067cbdafd GCS_Mavlink: Adapt to upstream mavlink changes to the SCALED_PRESSURE message 2020-07-29 14:34:22 +10:00
Michael du Breuil 6773821b3b GCS_MAVLink: Don't forward MAVLink data on channels marked private, make private channels more private 2020-07-22 07:17:49 +10:00
Andy Piper 05416daef3 GCS_Mavlink: output fast sampling startup messages 2020-07-10 16:45:29 +10:00
Andrew Tridgell 5a18b16f69 GCS_MAVLink: use strncpy_noterm 2020-07-10 13:32:24 +10:00
Andrew Tridgell 9466e7e71e GCS_MAVLink: make correct_offboard_timestamp_usec_to_ms protected
for use by vehicle code
2020-07-10 13:28:38 +10:00
Andrew Tridgell 91aaa7876d GCS_MAVLink: reserve another mavlink channel
for SimShip
2020-07-10 13:28:38 +10:00
Peter Barker 741520d598 GCS_MAVLink: find next bucket to send when sending-ids emptied on msg removal
We need to find the next bucket of messages to send when we've removed
the last message id from the current set of IDs we're sending out - not
just when we've empted the bucket the messages came from in the first
place.

An internal check caught this bug - the
'next_deferred_bucket_message_to_send called on empty bucket' error
2020-07-07 10:49:31 +10:00
Andrew Tridgell 90232fa6c0 GCS_MAVLink: fixed alignment errors in FTP server 2020-07-07 10:23:00 +10:00
Peter Barker e2056f56e3 GCS_MAVLink: support for sending generator message 2020-07-03 08:21:42 +09:00