When PWM_Sysfs_Base constructor is called, global variable hal may not
have been initialized resulting in NULL dereferencing error.
Move hal dependent stuff from contructor to init method.
By opening with O_CLOEXEC we make sure we don't leak the file descriptor
when we are exec'ing or calling out subprograms. Right now we currently
don't do it so there's no harm, but it's good practice in Linux to have
it.
Several return values in the constructor of the scheduler were ignored
before, while they should be respected.
I found that bug while strac'ing ardupilot as it failed at some later
point.
Signed-off-by: Ralf Ramsauer <ralf.ramsauer@othr.de>
This allows to terminate the flight stack nicely, ensuring it returns 0
so init system can check by return code if it terminated nicely or if it
was due to a crash.
This allows to wakeup the thread that is sleeping on Poller::poll()
[ which in our case is an epoll_wait() call ]. This is usually achieved
by using a special signal and using the pwait() variant of the sleeping
function (or using signalfd). However integrating the signal in the
Thread class is more complex than simply use the eventfd syscall which
can serve our needs.
Up until now we rely on Thread objects and variants thereof to be allocated
on heap or embedded in another object that's zero'ed on initialization.
However sometimes it's convenient to be able to use them on stack as
will be the case when writting unit tests.
Initialize all relevant fields to allow them to be used on stack. While
at it, prefer C++11 initialization on Poller since it's only setting the
default (invalid) value.
RC_Channel: To nullptr from NULL.
AC_Fence: To nullptr from NULL.
AC_Avoidance: To nullptr from NULL.
AC_PrecLand: To nullptr from NULL.
DataFlash: To nullptr from NULL.
SITL: To nullptr from NULL.
GCS_MAVLink: To nullptr from NULL.
DataFlash: To nullptr from NULL.
AP_Compass: To nullptr from NULL.
Global: To nullptr from NULL.
Global: To nullptr from NULL.
This patch replaces the 'old style' ringbuffer by the ByteBuffer class.
An effort was made to keep the exchange as close as possible from a
drop-in replacement to minimize the risk of introducing bugs.
Although the exchange opens opportunities for improvement and
simplification of this class.
When the buffer wraps and we do it in 2 steps, we can't actually do the
second part if it fails or if we wrote less bytes than we intended,
otherwise we will corrupt the data being sent.
This patch replaces the 'old style' ringbuffer by the ByteBuffer class.
An effort was made to keep the exchange as close as possible from a
drop-in replacement to minimize the risk of introducing bugs.
Although the exchange opens opportunities for improvement and
simplification of this class.
The constant passed to cflag is BOTHER, meaning the actual baud is set
in the other specific members. Don't define B* constants as they are
misleading here and this is why it doesn't work with e.g.
cfset[io]speed()... that function expect a B* constant which in Linux
is not the speed, but an index to an array with speeds.
Accidentally pushed in commit 298f7bffb9
The order of the motors shouldn't have been changed on version 5 because
it is specific to older versions of the ESC controller firmware
We currently check examples are buildable with waf which doesn't need
the libraries to be specified in a make.inc file. Having the makefiles
there is misleading since people try to build and realize the build is
broken.
this is a RCInput module for multiple R/C uart protocols running at
115200 baud 8-bit. We can decode multiple protocols in parallel with
this module, relying on frame timing and CRCs to get the right
protocol
Contributions from:
- Gustavo Jose de Sousa <gustavo.sousa@intel.com>
- José Roberto de Souza <jose.souza@intel.com>
- Lucas De Marchi <lucas.demarchi@intel.com>
- Patrick J.P <patrick.pereira@intel.com>
25c7e8b changed the logic of transfer(). Align
I2CDevice::read_registers_multiple() in the same way.
Signed-off-by: Ralf Ramsauer <ralf.ramsauer@othr.de>
If I2CDevice::transfer() has to do nothing it returns false. This can be
misleading, as this might feel contradictory.
Let's spend a comment on that.
Signed-off-by: Ralf Ramsauer <ralf.ramsauer@othr.de>
According to man 3 ioctl, ioctl returns other values than -1 on success.
So loop while ioctl returns -1.
Furthermore, there is no necessity to initialise r with -EINVAL,
Signed-off-by: Ralf Ramsauer <ralf.ramsauer@othr.de>
We aren't going to use all the poller infra for now and we need it's
behavior a little bit different for what we are going to use:
- Do not use any "fair" time for each ready fd since we don't want
to set a timeout
- Allow to set the fd on Pollable after constructing it since we are
likely to embed Pollable inside other structs and just later be
able to open an fd.
- Let caller use the epoll flags directly - this is not in AP_HAL,
so there's no need to abstract them
Add system's polling infrastructure to be notified whenever a
file descriptor is ready to be read from or written to.
Adds a few classes:
* Poller, as an interface to epoll()
* Pollable, as an interface to a file descriptor
../../libraries/AP_HAL_Linux/SPIDevice.cpp: In member function ‘virtual AP_HAL::OwnPtr<AP_HAL::SPIDevice> Linux::SPIDeviceManager::get_device(const char*)’:
../../libraries/AP_HAL_Linux/SPIDevice.cpp:337:27: warning: comparison is always false due to limited range of data type [-Wtype-limits]
for (uint8_t i = 0; i < _n_device_desc; i++) {
~~^~~~~~~~~~~~~~~~
Define a dummy device to remove warning.
This centralized private header encourages centralizing things on
umbrella headers that are a pain to maintain. Force each part of
AP_HAL_Linux to include what is used.
Make some member variables protected to follow what we do in other
places (and there's no reason to be private).
Move defines to .cpp to reduce their visibility.
This centralized namespace header encourages centralizing things on
umbrella headers that are a pain to maintain. Force each part of
AP_HAL_Linux to include what is used.
While at it, do some whitespace cleanups and minor changes to adhere to
coding style.
This is selectable by a define and is never changed. Just remove
everything referencing it: we can come up with a better solution if it
is actually used later.
There's little point in having the Linux::AnalogIn just to implement and
empty interface. All implementations inside AP_HAL_Linux are already
inheriting directly from AP_HAL, so just remove it.
In a case ArduPilot is launched as a background process without
detaching with *nohup* like this ./arduplane -C /dev/ttyAMA0 ConsoleDevice
is created and an attempt to read from it is made. This yields in a stopped
process. This is an endeavour to overcome this problem.
Using factory method maked it easier to grasp the lifetime of all object
that get created and destroyed. Instead of spanning this thoughout whole
source file we have it nicely encapsulated in this a little horrendeous
_parseDevicePath that is of course to improve more.
Otherwise we're going to leak memory without any need.
Before this fix we've created ConsoleDevice 4 times in case -A switch hadn't been supplied,
but we hadn't ever deleted those. Now there's no memory leak here.
Minor changes to follow coding style and improve readability:
- sort headers
- move struct definition to compilation unit rather than header
- Add braces to if, for, etc
../../libraries/AP_HAL_Linux/Perf.cpp: In member function ‘void Linux::Perf::_debug_counters()’:
../../libraries/AP_HAL_Linux/Perf.cpp:85:36: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘uint64_t {aka long unsigned int}’ [-Wformat=]
c.name, c.count);
^
Test code for integration with another thread to pull data from internal
perf counters. Since we are using the timer thread here, there's no
retry mechanism and we only print that data can be corrupted.
Instead of creating a new object Perf_Lttng copying the necessaries
fields, just make a tighter integration with the internal perf counters
and re-use the same fields.
The idea is to leave the internal perf enabled all the time, like it is
in PX4, and then allow the integration with lttng on top. Next step
would be to runtime enable/disable only the perf counters we are
interested in.
This also changes the structure so it's easy to allow another thread to
pull data from the Perf object. A rw lock protects from addition of new
counters and an atomic unsigned int allows other threads to do a
lockless copy of the data.
In order for this to work the allocation was changed to use a single
memory pool instead of returning a calloc'ed data for each perf counter.
Since most of our counters are of ' elapsed' type, don't bother using a
smaller struct for the 'count' type
If the RPi version detection fails, the standard version is now RPi2/3 instead of RPi1.
I think this is useful, because the RPi1 is not really supported (performance reasons).
Like others, use HAVE_ prefix and name it HAVE_LTTNG_UST to be the same
name as exported by pkg-config While at it remove wrong comment with
_HELLO_TP_H.
Andrew Tridgell
Lucas De Marchi
Peter Barker
Julien Beraud
Mathieu OTHACEHE
Mathieu OTHACEHE
Ralf Ramsauer
murata
hiro2233
Murilo Belluzzo
Martin Evans
William Liu
Gustavo Jose de Sousa
Patrick J.P
Leandro Pereira
Luiz Ywata
Staroselskii Georgii
dgrat