Andrew Tridgell
86d2ccf0e7
Plane: update gyro fft throttle
...
allows for updating or learned FFT freq
2022-05-10 08:08:56 +10:00
Andrew Tridgell
8aba79b8a0
Plane: release notes for 4.2.0
2022-05-04 10:33:50 +10:00
Peter Barker
e2e3e228b3
ArduPlane: tidy includes
2022-05-03 09:14:58 +10:00
Mirko Denecke
d6bca7405a
ArduPlane: fix auxiliary typo
2022-05-02 10:55:08 +10:00
Andrew Tridgell
12d829e740
Plane: release notes for plane 4.2.0beta6
2022-04-28 18:19:40 +10:00
Peter Barker
91e784f28d
Plane: do not use guided waypoint for loiter location
...
Currently this waypoint is set 10,000m away by the avoidance behaviour
Instead, immediately enter loiter mode
2022-04-21 06:59:39 +10:00
Henry Wurzburg
0d01ac389c
Plane: add Q_OPTION for RTL always on RC failsafe for ship landing
2022-04-19 19:58:46 +10:00
Andrew Tridgell
15084cb6f3
Plane: moved harmonic notch update code to AP_Vehicle
2022-04-19 09:39:03 +10:00
Andrew Tridgell
7aafd5cf98
Plane: param conversion for INS_NOTCH to INS_HNTC2
2022-04-19 09:39:03 +10:00
Andrew Tridgell
d57abb1230
Plane: support harmonic notch on 2nd RPM sensor
2022-04-19 09:39:03 +10:00
Andrew Tridgell
c1d841dd93
Plane: support two full harmonic notch filters
2022-04-19 09:39:03 +10:00
Sanket Sharma
594160daf3
Plane: Updated highest airspeed limit when armed
2022-04-18 14:54:57 +10:00
Andrew Tridgell
627f62d23b
Plane: param conversion for INS_NOTCH to INS_HNTC2
2022-04-16 08:14:06 +10:00
Peter Barker
fd4a00a654
ArduPlane: stop libraries including AP_Logger.h in .h files
...
AP_Logger.h is a nexus of includes; while this is being improved over
time, there's no reason for the library headers to include AP_Logger.h
as the logger itself is access by singleton and the structures are in
LogStructure.h
This necessitated moving The PID_Info structure out of AP_Logger's
namespace. This cleans up a pretty nasty bit - that structure is
definitely not simply used for logging, but also used to pass pid
information around to controllers!
There are a lot of patches in here because AP_Logger.h, acting as a
nexus, was providing transitive header file inclusion in many (some
unlikely!) places.
2022-04-08 19:18:38 +10:00
Andrew Tridgell
3bdcff263d
Plane: release notes for 4.2.0beta5
2022-04-07 10:07:25 +10:00
Andrew Tridgell
8e37c93e7d
Plane: fixed rudder control when ARMING_RUDDER != 2
...
when rudder disarm is disabled we should allow full yaw control
regardless of throttle level. We should also only disable left yaw
when throttle is at zero, as right yaw does not indicate pilot may be
trying to disarm
2022-04-03 09:12:03 +10:00
Peter Barker
2c42c056d8
Plane: correct EnableLandResponsition->EnableLandReposition
2022-03-31 20:30:55 +11:00
Mark Whitehorn
910406e82d
Plane: handle AIRBRAKE RC option
2022-03-29 22:51:10 +01:00
Andrew Tridgell
c32a2d542c
Plane: added release notes for 4.2.0beta4
2022-03-28 20:55:43 +11:00
Andrew Tridgell
48881eeb55
Plane: fixed yaw on the ground when rudder disarming in AUTO
...
when a quadplane touches down in an auto throttle mode the pilot may
use rudder to disarm. The check for rudder disarm was only active in
modes without auto-throttle. This expands it to all modes if the
throttle has hit the lower limit
2022-03-24 07:44:40 +11:00
Andrew Tridgell
680162cef0
Plane: added a value for RTL_AUTOLAND to disable arming check
...
set RTL_AUTOLAND=3 to get go-around but not RTL DO_LAND_START usage
2022-03-23 20:22:58 +11:00
Andrew Tridgell
27cbe5dbbb
Plane: prevent rapid RTL/AUTO switching on fence breach
...
don't switch back to RTL if already in a DO_LAND_START sequence
2022-03-23 20:21:59 +11:00
Andrew Tridgell
d82a306cc2
Plane: when shutting down motors force outputs to minimum
...
this fixes issue #20354 where a long spool time can lead to motors
running without control for an extended period of time.
2022-03-23 18:20:42 +11:00
Peter Barker
2784f8fa7f
Plane: remove persistent guided_WP_loc state
...
So instead of updating plane.guided_WP_loc and then calling
set_guided_WP(void) to copy that state into plane.next_WP_loc we pass
the new location in the call to set_guided_WP(const Location &loc).
avoidance was the only place which was not entirely over-writing
plane.guided_WP_loc. However, plane.next_WP_loc was updated to be the
current location when we entered guided mode. If we update the
horizontal/vertical avoidance now it is relative to the current
location, not the guided wp location, which could be quite important.
2022-03-22 10:14:40 +11:00
Peter Barker
1f5165349e
Plane: correct compilation when airspeed disabled
2022-03-20 21:47:05 +11:00
Andrew Tridgell
2c22cbc50e
Plane: update release notes for 4.2.0beta3
2022-03-18 21:13:54 +11:00
Henry Wurzburg
14700063d2
ArduPlane: convert floating point divides into multiplys
2022-03-18 15:26:44 +11:00
Andrew Tridgell
6ebefbdb16
Plane: added airspeed based pitch limit check
...
prevent using too much pitch when at low airspeed, which can lead to
severe instability in SLT quadplanes
2022-03-18 13:36:16 +11:00
Andrew Tridgell
eabdaae1e7
Plane: use set_lean_angle_max_cd()
...
allows for a wider range of Q_TRANS_DECEL while landing on the desired
landing point
2022-03-18 13:36:16 +11:00
Andrew Tridgell
cc6fc2b130
Plane: improvements to POSITION1 controller
...
this improves 4 things in the POSITION1 controller based on logs from
4.2.0beta2. The changes are designed to increase the tolerance to
an incorrect value for Q_TRANS_DECEL, reducing landing overshoot
1) we fix the initialisation of the acceleration. The
init_xy_controller() function assumes zero accel, so we need to
call set_accel_desired_xy_cmss() just after that init to get the
correct accel. Thanks to Leonard for this fix
2) if we decel more than expected due to too low Q_TRANS_DECEL we
need to reduce the target speed, rather than putting the nose down
3) lower the default Q_P_JERK_XY to a value more appropriate for most
quadplanes (Leonard suggested a value of 2)
4) fixed the pitch envelope from Q_BACKTRANS_MS to start after the
airbrake phase is complete
2022-03-18 13:36:16 +11:00
Andrew Tridgell
3772029450
Plane: fixed pitch envelope after AIRBRAKE
...
we need to setup last_fw_mode_ms and last_fw_nav_pitch_cd when we
enter POSITION1 mode so that the expanding envelope pitch limit from
Q_BACKTRANS_MS is applied correctly
2022-03-18 13:36:16 +11:00
Andrew Tridgell
8b16b5ca94
Plane: adjust throttle mix for auto landing
...
use mix-max during landing approach and initial descent, use min in
land final. As discussed with Leonard
2022-03-18 13:35:46 +11:00
Peter Barker
d93449ac28
ArduPlane: split AP_HAL_SITL and HAL_SIM_ENABLED
2022-03-17 14:39:55 +11:00
Tim Tuxworth
21ec47f184
Plane: Display Fence Breach message in GCS
...
Send a "Geofence breach" message to the Ground Control Station. Without this when the fence is breached and if anything happens as a result, such as RTL, it will happen silently.
2022-03-16 18:04:19 +11:00
Andrew Tridgell
a1856c5c22
Plane: added an arming check for Q_ASSIST_SPEED
...
Q_ASSIST should really be enabled for all non-tailsitter
quadplanes. This arming check will help users remember to configure it
2022-03-16 09:29:14 +11:00
Andrew Tridgell
82937ca778
Plane: check that RTL_AUTOLAND is set if using DO_LAND_START
2022-03-14 09:52:41 +11:00
Andrew Tridgell
0ca48fa9da
Plane: added release notes for 4.2.0beta2
2022-03-10 13:44:05 +11:00
Andrew Tridgell
55c46cd868
Plane: protect against short stop_distance
2022-03-10 13:41:18 +11:00
Andrew Tridgell
5e14b9efe6
Plane: use pos control for most of LAND_FINAL
...
this gives more accurate landing with some velocity drift
2022-03-10 07:34:20 +11:00
Andrew Tridgell
cc9b9813cb
Plane: review fixes
...
thanks Pete!
2022-03-10 07:34:20 +11:00
Andrew Tridgell
f09c715d7a
Plane: wait till motors are fully up before takeoff in guided mode
...
this allows for guided mode takeoff in tilt-rotors. Otherwise motors
till be pointing forward and takeoff will go very badly
2022-03-10 07:34:20 +11:00
Andrew Tridgell
3659669409
Plane: cope with high angle error in airbrake state
...
if we are flying too far off the target vector then exit airbrake
state. This prevents flying for a long distance away from the landing
point in airbrake mode
2022-03-10 07:34:20 +11:00
Andrew Tridgell
f9ecf15973
Plane: setup target accel in POSITION1 state
2022-03-10 07:34:20 +11:00
Andrew Tridgell
2864e21b31
Plane: allow for a trans decel margin
...
so if we are behind the velocity curve we are less likely to overshoot
landing
2022-03-10 07:34:20 +11:00
Andrew Tridgell
33bc067edf
Plane: fix NAV_CONTROLLER_OUTPUT in Q modes
...
Q modes don't always use wp_nav, but do use pos_control
AUTO and QRTL setup the plane navigation as well, so can use the L1
data
2022-03-10 07:34:20 +11:00
Andrew Tridgell
3fe9a55269
Plane: added APIs for lua ship landing
2022-03-10 07:34:20 +11:00
Andrew Tridgell
c54fb0f51b
Plane: link in AP_Follow
...
ready for ship landing
2022-03-10 07:34:20 +11:00
Andrew Tridgell
72087335f7
Plane: removed terrain home correction
2022-03-10 07:34:20 +11:00
Iampete1
a7bc844780
Plane: never stick mix without valid RC input
2022-03-09 18:26:30 +11:00
Iampete1
c46a19bf89
ArduPlane: tailsitter: keep attitude controll throttle level upto date for smoother controller handover
2022-03-09 18:21:51 +11:00
Andrew Tridgell
8ccf84d9a3
Plane: disallow mavlink disarm while flying
...
this relies on is_flying(), and we will need to watch for reports of
the heuristics failing
2022-03-09 17:13:45 +11:00
RuffaloLavoisier
962d1d112b
ArduPlane : Indentation correction
2022-03-08 14:24:46 -08:00
RuffaloVM
d8085f71af
ArduPlane : case label indentation
2022-03-08 14:24:46 -08:00
Andrew Tridgell
6d63e1f7d3
Plane: added Q_LAND_ALTCHG parameter
...
this is the threshold height change over 4 seconds for a landing to be
detected. It can be raised if landing detection is very slow
2022-03-09 07:50:10 +11:00
Iampete1
54e57ccff0
Plane: don't prevent stick mixing in none RC failsafe
2022-03-08 11:21:13 +11:00
Peter Barker
302c8e4b98
ArduPlane: rename within_min_dz to in_min_dz for consistency
...
... consistency with in_trim_dz
2022-03-08 11:17:45 +11:00
Andrew Tridgell
08d53c2d64
Plane: change master version to 4.3.0dev
2022-03-02 07:44:36 +11:00
Andrew Tridgell
ad53ee7f0e
Plane: added release notes for 4.2.0beta1
2022-03-02 07:43:59 +11:00
Peter Barker
c0aa20b1d0
ArduPlane: include cleanups
2022-03-01 11:21:33 +11:00
Henry Wurzburg
0c32e71272
ArduPlane: clarify and simplify RC failsafe messages
2022-03-01 11:05:15 +11:00
Peter Barker
452a5df0cc
ArduPlane: add RebootRequred to stream rate parameters
2022-03-01 11:01:12 +11:00
Iampete1
80f8f8b14e
Plane: quadplane: double log QPOS state change
2022-03-01 10:59:07 +11:00
Iampete1
c26ffed47f
Plane: motor_test: use PWM min and max from RC_Channel
2022-03-01 10:47:25 +11:00
Peter Barker
b19bfba0ec
Plane: use has_valid_input in place of checking throttle counter
2022-03-01 10:29:37 +11:00
Peter Barker
13fa1e30ad
ArduPlane: rename and make enum RC_Channel::ControlType
...
Type:: is too generic; get_type should probably be get_control_type
2022-02-27 09:55:01 +11:00
Andrew Tridgell
b444420329
Plane: removed controller error in transmitter tuning
2022-02-22 12:23:48 +11:00
Andrew Tridgell
e3e125c307
Plane: prepare for 4.1.7
2022-02-21 12:11:28 +11:00
Iampete1
267583db55
Plane: quadplane: never reset yaw target rates when entering QPOS1
2022-02-21 09:35:06 +11:00
Iampete1
9fd14dbf94
Plane: quadplane: set IO failsafe limit for all motors
2022-02-17 12:31:16 +11:00
Iampete1
42a2e1094c
Plane: set failsafe limit for throttle left and right
2022-02-17 12:31:16 +11:00
Andrew Tridgell
1bdc9b5bf8
Plane: fixed in_vtol logic so QRTL can AIRBRAKE
2022-02-16 07:43:01 +11:00
Andrew Tridgell
aab6c94936
Plane: don't weathervane in AIRBRAKE state
...
this prevents unwanted VTOL motor throttle while trying to slow
down. In this stage the slaving of yaw rate to fixed wing roll control
is sufficient
2022-02-16 07:43:01 +11:00
Andrew Tridgell
2846f87eeb
Plane: reduce height gain in auto landing for tiltrotors
...
avoid running the motors while tilted past the tilt max if we are in
AIRBRAKE state. This stops a large amount of forward thrust from the
tilted motors while trying to slow down, while still maintaining
attitude control
2022-02-16 07:43:01 +11:00
Andrew Tridgell
5bb7b04343
Plane: added release notes for 4.1.7beta1
2022-02-12 09:00:51 +11:00
Peter Barker
458d43fc1e
ArduPlane: send deprecated message warning for MAVLINK_MSG_ID_SET_HOME_POSITION
2022-02-10 12:13:43 +11:00
Iampete1
1ca1707f9f
Plane: quadpalne: keep motors interlock state upto date with E-stop
2022-02-10 07:43:40 +09:00
Peter Barker
d914e4e63b
Plane: convert next WP alt to global frame in POSITION_TARGET_GLOBAL_INT
2022-02-09 16:09:41 +11:00
Peter Barker
10be59da17
ArduPlane: create and use location_from_command_t
2022-02-09 09:15:11 +11:00
Peter Barker
e1314cc297
Plane: remove ancient convert_mixers
2022-02-08 12:19:55 +11:00
Peter Barker
4068d57930
Plane: correct spelling of mode_lotier_qland
2022-02-08 12:19:03 +11:00
Peter Barker
7c0b1f46d6
Plane: remove logging of STRT message
...
SType is always 3 - and we're just about to log the entire
mission so CTOT is pointless
2022-02-08 12:18:16 +11:00
Henry Wurzburg
e82ad1ec24
ArduPlane: fix error in Tricks on a Switch qualifier
2022-02-08 11:54:38 +11:00
Peter Barker
bab79d0094
ArduPlane: stop passing mission in Terrain constructor
...
Terrain can use the mission singleton
This means Copter can have terrain while compiling mission out
2022-02-08 11:20:20 +11:00
Peter Hall
717b18a680
Plane: quadplane: add allow_weathervane transtion class method
2022-02-08 10:38:16 +11:00
Peter Hall
6a719664d3
Plane: quadplane: pass takeoff and landing state to weathervane
2022-02-08 10:38:16 +11:00
Gone4Dirt
a79359dc67
Plane: use new weathervane library
2022-02-08 10:38:16 +11:00
Peter Barker
dd06a93c06
Plane: remove unused TRUE/FALSE defines
2022-02-07 21:20:21 +11:00
Peter Barker
9878701095
Plane: remove unused DEBUG define
2022-02-07 21:20:21 +11:00
Peter Barker
90310f4c6e
Plane: remove unused 'ALT_CONTROL' enumeration
2022-02-07 21:20:21 +11:00
Henry Wurzburg
ea9d35c99d
ArduPlane: extend nav_scripting to all modes
2022-02-07 21:19:28 +11:00
Hwurzburg
ad30d476c8
Plane: enforce acro rate limits in aerobatics scripting
2022-02-07 12:35:31 +11:00
Hwurzburg
0efb2f2048
Plane: disable TECS use during NAV_SCRIPT_TIME
2022-02-07 12:34:15 +11:00
murata
f8383df5a4
Plane: Remove meaningless semicolons
2022-02-07 08:27:34 +09:00
Bill Geyer
54bdde8845
Copter: fix parameter issue with quadplane
2022-02-01 23:06:51 -05:00
Bill Geyer
9bec232c8a
Plane: modify qautotune to use of multi subclass
2022-02-01 23:06:51 -05:00
Peter Hall
9ec1faf3f9
Plane: tailsitter: rate limit second half of FW transtion
2022-01-26 19:03:32 +11:00
Peter Barker
d6c653bdc5
ArduPlane: move logging of SIMSTATE, AHRS2 and POS into AP_AHRS library
2022-01-25 10:59:17 +11:00
Peter Barker
266d384ca7
ArduPlane: rename AP_AHRS::get_position to get_location
2022-01-25 10:47:22 +11:00
Iampete1
f725f7bb7e
Plane: set new slew limit and inherit slew limt for flaps
2022-01-25 10:12:13 +11:00
Joshua Henderson
c1abcfb7c4
Plane: move Airspeed to AP_Vehicle
2022-01-19 18:21:32 +11:00
Josh Henderson
6dc5a9fc54
Plane: GCS move airspeed sensor status flags up
2022-01-19 18:21:32 +11:00
Josh Henderson
9a3fed0263
Plane: move high_latency_air_temperature up
2022-01-19 18:21:32 +11:00
Andrew Tridgell
3273ead11b
Plane: use EKF climb rate estimate in VFR_HUD.climb
...
EKF estimate is both more accurate and less noisy
2022-01-18 13:26:31 +11:00
Iampete1
32488a5e3a
Plane: add MOTB logging at 10hz
2022-01-18 10:18:10 +11:00
Jaaaky
852546f8cf
ArduPlane: fix man_expo pitch & rudder params/variables
2022-01-12 18:27:08 +11:00
Peter Barker
0cf4254290
ArduPlane: move RPM sensor logging into AP_RPM
2022-01-11 11:09:26 +11:00
Iampete1
3a5c7ea8fc
Plane: quadplane: add transtion fail action param
2022-01-11 11:02:33 +11:00
Peter Hall
b64ddb9ac0
Plane: tailsitter: only set limit flags if outputs are configured
2022-01-11 10:37:38 +11:00
Peter Hall
2ffebebddc
Plane: tailsitter: provide min throttle limit based on disk therory outflow velocity
2022-01-11 10:37:38 +11:00
Iampete1
0fa1ddf7c2
Plane: tailsitter: always give pitch prority elevon mixing in VTOL modes
2022-01-11 10:37:38 +11:00
Iampete1
d473344177
Plane: add video stab log bit and log in ahrs_update
2022-01-05 19:56:03 +11:00
Iampete1
ca1b5b1db2
Plane: Quadplane: use get_frame_and_type_string
2022-01-05 19:51:19 +11:00
Peter Barker
89e3e27d3d
ArduPlane: move INS notch filter logging into INS
2022-01-05 16:34:36 +11:00
Peter Barker
173f36c145
ArduPlane: make vehicles write notch log messages
2022-01-05 16:34:36 +11:00
Peter Hall
d4eb2c6396
Plane: quadplane: QPOS_POSITION1 tailsitters use input_vel_accel method
2022-01-04 10:42:12 +11:00
Iampete1
4848ac9166
Plane: quadplane: don't use `is_active_z()`, becasue its wrong
2022-01-04 10:42:12 +11:00
Iampete1
fb1f6b57ad
Plane: Quadplane: never run Z controller if motors are not throttle unlimited
2022-01-04 10:42:12 +11:00
Peter Hall
c215fa0745
Plane: Quadplane: never run Z controller in tailsiter VTOL transtion
2022-01-04 10:42:12 +11:00
Peter Hall
9df753551e
Plane: quadplane: tailsitter: always relax pitch after transtion
2022-01-04 10:42:12 +11:00
Peter Hall
d054ca0426
Plane: quadplane: limit post VTOL transtion pitch rate on tailsitters in maunal modes
2022-01-04 10:42:12 +11:00
Peter Hall
67d7ba490f
Plane: quadplane: pass time to tailsitter.in_vtol_transition where avalable
2022-01-04 10:42:12 +11:00
Iampete1
9634641323
Plane: tailsitter: rate limit pitch up in VTOL pos control flight.
2022-01-04 10:42:12 +11:00
Andrew Tridgell
2691022e12
Plane: update release notes for 4.1.6
2022-01-03 13:11:18 +11:00
Andrew Tridgell
2251293ec7
Plane: fix stabilize mode
...
should self-level. Broken by #19171
2022-01-03 08:09:53 +11:00
Iampete1
abe9e4425b
Plane: quadplane: remvoe unused loiter initial pitch varable
2021-12-31 08:46:31 +11:00
Andrew Tridgell
fb019eb0f3
Plane: add a low pass filter to speed scaler
...
this is needed due to the filtering done on the target rate in
AC_PID. With a low filter rate in AC_PID a step in the speed scaler
results in a step in the FF output due to the mismatch in the
instantaneous SS and the filtered target rate
2021-12-29 18:36:05 +11:00
Peter Barker
e55eea961f
ArduPlane: create and use AP_OPTICALFLOW_ENABLED
2021-12-29 18:12:03 +11:00
Andrew Tridgell
336b666f83
Plane: fixed stick mixing and throttle nudge in QRTL approach
...
thanks to Henry for noticing this
2021-12-28 16:04:12 +11:00
Peter Barker
d7fae5263f
ArduPlane: adjust for rename of OpticalFlow.cpp
2021-12-28 10:16:20 +11:00
Samuel Tabor
a715472353
Plane: Specify starting location to set_offset_altitude_location
2021-12-27 11:27:52 +11:00
Hwurzburg
18e427d27d
Plane: add Q_OPTION to force fw trans on fail instead of QLAND
2021-12-24 13:55:15 +11:00
Iampete1
2154738421
Plane: Quadplane: only advance to QPOS_POSITION2 once tilts have finished slewing
2021-12-22 18:46:14 +11:00
Iampete1
eac52fe08f
Plane: quadplane: don't ouput VTOL throttle on tiltrotor with no VTOL motors and till fully forward
2021-12-22 18:46:14 +11:00
Iampete1
6116eaeb32
Plane: quadplane: enhance tiltrotor transtion to better deal with tiltrotors with all motors tilting
2021-12-22 18:46:14 +11:00
Andy Piper
aefc97fafa
Plane: use calculated number of notches for dynamic harmonic
2021-12-22 18:13:38 +11:00
Andrew Tridgell
db0f06fb58
Plane: update release notes for 4.1.6beta1
2021-12-21 13:21:50 +11:00
Peter Barker
278899e44c
ArduPlane: tidy log message id definitions
...
Add a comment indicating only 20 ids are available to the vehicle
2021-12-21 10:42:18 +11:00
Jaaaky
50430d9fc8
ArduPlane: Fix multi #include's
2021-12-21 10:38:46 +11:00
Iampete1
055d90d49b
Plane: tailsitter: add gains to scale control surface vs motors
2021-12-21 10:14:34 +11:00
Gone4Dirt
d244a0b803
Plane: Make RPM log independant of RC log mask
2021-12-16 12:48:48 +11:00
Samuel Tabor
c44fed34d4
AP_Soaring: Override airspeed and flap angle.
2021-12-16 07:12:24 +11:00
Peter Barker
08a8b3f155
Plane: use @CopyValuesFrom for FLTMODEn parameters
2021-12-16 07:11:33 +11:00
Iampete1
8aa4a802f3
Plane: tiltrottor: add missing ff terms
2021-12-14 10:14:28 +09:00
Andrew Tridgell
c746efff4f
Plane: updated release notes for 4.1.5
2021-12-13 10:55:44 +11:00
Hwurzburg
049f5f2135
Plane: fix divide by zero in transition time
2021-12-10 19:10:51 -08:00
Andrew Tridgell
1c89b7f3a2
Plane: check for VTOL takeoff in AUTO
...
if the "only arm in Q modes" bit is set in Q_OPTIONS then check that
in AUTO mode we are in a VTOL takeoff WP
2021-12-07 12:51:18 +11:00
Hwurzburg
274111a5ea
ArduPlane: clean up short failsafe
2021-12-07 10:09:33 +11:00
Andrew Tridgell
522056d6f7
Plane: release notes for 4.1.5beta1
2021-12-04 18:06:38 +11:00
Andrew Tridgell
ca13503f41
ArduPlane: revert compass parameter changes
2021-12-04 16:51:53 +11:00
Andrew Tridgell
e7c7cdd653
Plane: reset VTOL takeoff if not armed
...
we need to reset the takeoff target position while disarmed so we
don't use spurious position information from before we get good GPS
lock.
also remove the "Resetting previous waypoint" message as it doesn't
provide useful information and is just a distraction (it would be
printed continuously while waiting for arming with this PR)
2021-12-04 16:51:02 +11:00