Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
33,393 Commits 71 Branches 509 Tags 780 MiB
Commit Graph

189 Commits

Author SHA1 Message Date
Randy Mackay cc0b3705e9 Tools: default param file for Thunder Tiger Toyota Hilux 2018-07-06 14:47:15 +09:00
Lucas De Marchi 981a575aa2 Frame_params: rename some aerofc parameters 
Now that we don't panic() on unknown parameters, we can boot even with
wrong parameters. This brings the default parameters of aerofc to be up
to date.

The following parameters were not removed and will be warned:

WPNAV_LOIT_JERK
WPNAV_LOIT_MAXA
WPNAV_LOIT_MINA
WPNAV_LOIT_SPEED

There are no clear substitute for those, so they are staying until we
know if they should be renamed/changed/removed.
 2018-06-28 10:18:19 -07:00
Randy Mackay 8c485e1a9e Tools: set ground effect comp in tradheli default parameters 2018-06-08 09:51:50 +09:00
Randy Mackay 3ecc0ea6c8 Tools: add hydrotek boat default parameters 2018-05-29 16:07:55 +09:00
Randy Mackay f2ac48a33e Tools: update holybro kospi1 default 2018-05-28 10:42:21 +09:00
Randy Mackay 268fac0fba Tools: default params for Holybro Kospi1 2018-05-28 10:11:45 +09:00
ChristopherOlson 087fd4effc Tools: Add default tuning params for single-rotor TradHeli 
Tunes PSC, LOIT, NAV, ATC specific to Copter 3.6 and New Loiter
 2018-05-11 12:28:14 +09:00
Randy Mackay 94a1a025f1 Tools: update AION R1 default params 2018-04-26 14:07:08 +09:00
Randy Mackay 7f7a588002 Tools: add accel and turn-rate max and increase steering angle P 
these parameters were added to Rover-3.3
 2018-04-23 11:06:34 +09:00
Randy Mackay 1b26f8527a Tools: remove RC params from eLAB445 param file 2018-04-17 08:35:36 +09:00
Randy Mackay 741d641876 Tools: remove unused real-flight default param files 2018-04-17 08:32:25 +09:00
Randy Mackay 781a0b457b Tools: update WLToys v383 roll and pitch rate gains 2018-04-13 18:38:38 +09:00
Randy Mackay 2f26b3faa1 Copter: update HeliQuad param file 
fix servo range and reverse params
 2018-04-09 16:42:38 +09:00
Randy Mackay 80e5742d77 Tools: correct HeliQuad param file 2018-04-09 08:42:00 +09:00
Jacob Walser 9897ff60de Frame_params: Add BlueROV2 Heavy param file 2018-02-28 13:22:08 -05:00
nicknunno 72b698bf96 Tools: update AION default param 
Add servo-function reversed, compass offset maximum
 2018-02-12 16:56:46 +09:00
Andrew Tridgell 330fa815e8 Frams_params: updates for new pos controller for skyviper 2018-02-08 18:56:51 +11:00
Andrew Tridgell 238db04187 Frame_Params: set TMODE_ENABLE=2 for the F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell ca12d99430 Frame_Params: fixed orientation on F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell 76703a80c4 Frame_params: disable unpopulated serial ports 2018-02-08 17:36:33 +11:00
Andrew Tridgell 3b5bb3cae2 Frame_params: default to CC2500 radio for F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell 5eb29f94ce Frame_Params: update config for Skyviper-2450 2018-02-08 17:36:33 +11:00
Andrew Tridgell 674bf12f6e Frame_params: fixed ordering of F412 motors 2018-02-08 17:36:33 +11:00
Andrew Tridgell ebeda12953 Frame_params: added defaults for SkyViper-F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell 360a8d99bf Frame_params: bring 2450 params in line with release 2018-01-15 11:46:02 +11:00
Andrew Tridgell 40ba4645e6 Frame_params: added SkyViper 2450GPS params for ChibiOS 2018-01-15 11:46:02 +11:00
Matt 9f1c96bb09 Tools: Solo AC 3.6 parameters 
Parameters for a 3DR Solo running ArduCopter 3.6, since there are some
differences from 3.5.
 2018-01-11 11:14:12 +09:00
Matt a766551a48 Tools: Solo AC 3.5 disable log prearm check 
There are still intermitant false-positive logging failure happening in
ArduCopter.  This disables the logging arming check for the time being.
This was set back to 1 a few months ago thinking the issue was fixed.
But it turns out it is not.
 2018-01-11 11:13:53 +09:00
Randy Mackay af7bb7cbd7 Tools: update eLAB VEK default parameters 
Add default steering feedforward value
 2018-01-04 16:15:28 +09:00
Randy Mackay 7b0b9f10de Tools: AION R1 default params use steering feed-forward 
Also add wheel encoder defaults
 2018-01-04 14:03:52 +09:00
Randy Mackay 368698d173 Tools: AION R1 default remove compass-external 
compass-external settings should normally not need to be set
 2018-01-04 14:02:53 +09:00
NickNunno 94eceddf69 Tools: update AION R1 default parameters 
Added default presets to match documentation & hardware setup.
 2018-01-04 13:51:04 +09:00
Randy Mackay dcb37a2454 Tools: default param file for AION R1 rover 2017-12-23 14:25:25 +09:00
Matt 41f2e8869e FRAME_PARAMS: Solo mag and arming param update 
Updates the arming check to all
Updates the required compass parameters
Updates the compass_typemask to disable the LIS3MDL
 2017-12-23 10:58:03 +09:00
murata 0934bdb5dc Tools: remove default values from eLAB 445 params 2017-11-16 22:48:13 +09:00
Jacob Walser 83bb1e7f4a Frame_params: (BlueROV2/Sub-3.5.2) update tilt servo reversal 2017-11-14 18:10:45 -05:00
Jacob Walser 305f203dd3 Frame_params: (BlueRov2/Sub-3.5.2) Reset to defaults 2017-11-13 21:08:55 -05:00
Jacob Walser 67eefe3d6a Frame_params: (BlueRov2/Sub-3.5.2) Use integers for APInts 2017-11-13 20:57:43 -05:00
Jacob Walser acb65b99ac Frame_params: add file for BlueROV2 on Sub 3.5.2 2017-11-13 15:42:04 -05:00
TsuyoshiKawamura 3467be6695 Tools: update eLAB-445 parameter file 2017-11-01 14:07:43 +09:00
Andrew Tridgell 3a78255e54 Frame_Params: added WLToys V383 parameters 
for HeliQuad frame
 2017-10-03 10:16:41 +11:00
Lucas De Marchi 015242c89b Tools: add params for Aero Compute Board 
These are the parameter for Aero Compute Board to fly Intel Aero RTF
without the flight controller, using just the internal sensors
on the Linux side.
 2017-09-21 07:59:20 -07:00
Randy Mackay ebea292d63 Tools: add frame params for eLAB 470 quad 2017-09-13 17:55:05 +09:00
Jacob Walser 19086e34f0 Frame_params: update BlueROV2 defaults for 3.5.1 2017-08-30 17:49:34 -04:00
Andrew Tridgell 224dc439ab Tools: updated parameters to remove ELEVON and VTAIL settings 2017-08-01 08:25:32 +10:00
Matt 3fd393bc21 FRAME_PARAMS: Solo final parameters for AC 3.5.0+ 
This is the final list of parameters the Solo requires for ArduCopter
3.5.0+ that differ from ArduCopter 3.5.0 defaults.  I ran a
`mavparmdiff` on the defaults vs Solo to generate this list.  I added
`FRAME_TYPE` back even though it is default just because it is rather
critical. I removed all the parameters that are individual vehicle
specific (calibrations, pressure, etc).
 2017-07-17 09:09:35 +09:00
Randy Mackay 59503f15cb Tools: update eLAB VEK AI parameters 2017-06-29 16:14:15 +09:00
Randy Mackay bee666cd7a Tools: update eLAB VEK rover param file 2017-06-28 15:40:21 +09:00
murata 0a57177cee Tools: eLab LAB445 parameter file 2017-06-28 10:26:25 +09:00
Randy Mackay d934088660 Tools: update realflight simulator params 2017-06-26 17:28:48 +09:00