Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
55,453 Commits 71 Branches 508 Tags 630 MiB
Commit Graph

214 Commits

Author SHA1 Message Date
Amilcar Lucas b48a1f1fc4 ArduPlane: Fix 1280 builds 
Added fine-granular features in the AP_Mount class to reduce code size on 1280 chips
Remove camera trigger support on 1280 chips
 2012-08-27 01:33:45 +02:00
Amilcar Lucas 769f04b7d6 Improve comments, no functional changes 2012-08-27 01:32:27 +02:00
Andrew Tridgell c0c0b8c976 APM: added RECEIVER_RSSI_PIN option 
this allows for the receiver RSSI to be sent over MAVLink

Thanks to Burt Green for the suggestion
 2012-08-22 13:33:12 +10:00
Andrew Tridgell 9e926eae51 APM: optional build with new controller libs 2012-08-22 12:39:07 +10:00
uncrustify 3bee769405 uncrustify ArduPlane/config.h 2012-08-21 19:19:51 -07:00
Andrew Tridgell 343f7d2de0 APM: removed DMP support from ArduPlane 
Without centripetal correction the DMP code will almost certainly
crash a plane
 2012-08-22 11:46:35 +10:00
Andrew Tridgell 6d11940ada AHRS: removed Quaternion build support from APM/ACM/rover 2012-08-22 10:42:21 +10:00
Andrew Tridgell 2865434d02 APM: added 'OBC' failsafe module for ArduPlane 
this adds FS_* parameters for setting up APM to follow the outback
challenge failsafe rules.

This includes:

 - manual pin
 - heartbeat pin
 - waypoint for heartbeat failure
 - waypoint for GPS failure
 2012-08-15 12:39:34 +10:00
Andrew Tridgell e2c8ec2c9e APM: removed THROTTLE_REVERSE option 
Better to use RC3_REV
 2012-08-09 10:04:44 +10:00
Andrew Tridgell e133900c68 APM: Added STICK_MIXING option 
this replaces the compile time option. Disabling during long distance
flights when the transmitter may be out of range is useful.
 2012-08-09 08:53:29 +10:00
Amilcar Lucas d34549f386 Add an optional second mount to ArduPlane and ArduCopter 2012-08-08 23:22:24 +02:00
Andrew Tridgell dcc50b5705 AP_Airspeed: removed values passed to constructor 2012-08-08 16:38:39 +10:00
Andrew Tridgell 2114acddf1 APM: fixed default flap speed 
the default of 255 translates to -1 as a AP_Int8, so use zero to mean
no flaps
 2012-08-08 13:04:21 +10:00
Andrew Tridgell a823c9ceae APM: removed cli slider and dipswitch options 
use mavlink/eeprom for all config
 2012-08-08 12:12:29 +10:00
Amilcar Lucas 50b5d33745 Enable camera triggering by default 2012-08-04 16:32:47 +02:00
Amilcar Lucas 82b82283be ATmega1280 does not have enough memory for mount support so disable AUTO GPS support, to allow mount support to fit. 
This should almost have no side effects, because the most users use MTK anyways.
If the user defined a GPS protocol, than we will NOT overwrite it
 2012-08-04 16:32:20 +02:00
rmackay9 06e35820e5 ArduPlane: allow MPU6000's DMP to be used for attitude estimation. 
Enable by adding this line to APM_Config.h:
#define DMP_ENABLED ENABLED
 2012-07-28 19:50:40 +09:00
Andrew Tridgell 6bcfe913f7 APM: added a SCALING_SPEED parameter 
this allows users to adjust the base speed used for scaling roll/pitch
PIDs. This can be used to make PIDs work for both airspeed and
non-airspeed control
 2012-07-26 11:30:23 +10:00
Andrew Tridgell f6d7d1bc59 APM: changed PID library to do automatic deltat calculation 
this fixes a problem with the HDNG2RLL PID, which was using the wrong
time base and prevents similar bugs from happening in the future
 2012-07-06 19:59:18 +10:00
Andrew Tridgell 60caaa4b04 MAVLink: remove MAVLink 0.9 protocol support 
this simplifies the code a lot. We're not going back to 1.0
 2012-07-05 13:00:46 +10:00
Amilcar Lucas 07a18904fc With CLI and MOUNT active, the linker says: region `text' overflowed by 3858 bytes 
So disable CLI when MOUNT is active. Sorry I did not detect it before, but the APM_Camera branch worked in a different way.
 2012-06-13 21:08:09 +02:00
Amilcar Lucas 1906e06b69 Added camera trigger functionality 2012-06-13 21:00:20 +02:00
Jason Short 4e50db2f6e Added missing Manual_level config 2012-06-10 13:08:48 -07:00
Michael Oborne a71ed6c5ce enable mavlink10 by default 2012-06-04 08:02:08 +08:00
Andrew Tridgell f43f5900bc Telemetry: make it possible to use UART2 on APM2 
building with TELEMETRY_UART2=ENABLED allows you to use the solder
bridge on the APM2 to enable telemetry on UART2. This allows both USB
telemetry and a radio at the same time.
 2012-05-04 10:39:44 +10:00
Andrew Tridgell 8fab91e063 APM-nav: set NAV I value defaults to 0.1 
a small I value is good on most planes, so I think this is a better
default than 0. Thanks to Chris for asking about this.
 2012-04-30 12:27:30 +10:00
James Goppert 0e7e77760a Updated ArduPlane/ArduCopter cmake options. 2012-04-18 15:16:02 -04:00
Andrew Tridgell 86cc7a5e1d APM: enable AP_Declination by default 2012-03-30 14:25:27 +11:00
Andrew Tridgell 168c45ab12 AP_Declination: enabled auto declination by default in APM 2012-03-30 14:25:27 +11:00
Amilcar Lucas 6e9ffb4249 correct small typos in comments 2012-03-11 21:30:09 +01:00
Adam M Rivera 2524f9c8df AP_Declination: Added new config value to allow the user to have the declination overwritten on every 3D fix. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Andrew Tridgell 9a06d35772 make 'ENABLE' and 'ENABLED' mean the same things 
users get this wrong far too often!
 2012-03-10 10:34:33 +11:00
Andrew Tridgell e39c3cb9d2 APM: make it possible to build ArduPlane with quaternion support 2012-03-10 10:34:29 +11:00
Andrew Tridgell 35badbb97d APM: the CLI fits nicely on the 1280 again now 
I find the CLI very useful for testing, so enable it by default on the
1280. Logging is still off by default.
 2012-02-14 08:33:49 +11:00
Doug Weibel 4b24d865bf Stashing some battery monitoring ratio values in the comments for future use. 2012-01-15 16:35:46 -07:00
Doug Weibel 6e8ac99ed6 Fix airspeed sensor support for APM2. 
Airspeed sensor should be attached to Analog input 0
 2012-01-15 16:12:08 -07:00
Doug Weibel 69c7598db2 Update battery monitoring code for ArduPlane 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
 2012-01-15 16:10:28 -07:00
Michael Oborne e1a544cc78 fix relay on apm 1 AP 2012-01-05 07:51:01 +08:00
Andrew Tridgell d0245b206a APM2: default magnetometer to enabled 
all APM2s have a MAG at the moment

thanks to Chris for the suggestion
 2011-12-22 17:51:14 +11:00
Andrew Tridgell e99db6526f APM: added RST_SWITCH_CH parameter 
This is useful for switching back to the mode indicated by the control
switch after a failsafe or fence breach. I was just changing modes
each time, but it is far more elegant to have a spring loaded switch
for "I am ready to take control again", rather than continually
changing modes.
 2011-12-19 11:25:59 +11:00
Andrew Tridgell df094ce463 fixed airspeed sensor for ArduPlane on APM2 
we were trying to use a non-existant ADC chip!
 2011-12-17 07:29:09 +11:00
Andrew Tridgell b9a88aac32 geofence: added FENCE_TRIGGERED_PIN 
this allows for a digital pin to be set high when the geofence
triggers. This pin can be connected to an external failsafe device
 2011-12-17 07:29:08 +11:00
Michael Oborne 28d280562a apm 1280 disables 2011-12-16 22:26:39 +08:00
Andrew Tridgell 82b615df50 geofence: added geo-fencing control parameters 2011-12-16 20:11:51 +11:00
Pat Hickey d7f77aec93 ArduCopter & ArduPlane: Added support for apm2beta build via APM2_BETA_HARDWARE define 
* This enables the BMA085 driver for compatibility with beta boards.
* The CLI_SLIDER_ENABLED=DISABLED line does not need to be in the makefile.
  config.h takes care of this default.
 2011-12-11 15:21:09 -08:00
Pat Hickey 1b2ebdff44 ArduPlane: added config.h and defines.h to support CONFIG_BARO 2011-12-11 15:21:09 -08:00
Doug Weibel 2ef4c79a7c Minimum ground speed patch from Claudio Natoli. Thanks Claudio! 
This patch will boost the target airspeed as necessary to keep the ground speed above a parameter value - param_min_groundspeed.  Airspeed is still limited to FBW-max.  Setting min_groundspeed to zero (default) disables the feature.
 2011-12-09 16:43:25 -07:00
Andrew Tridgell 86927ac0a5 ArduPlane: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell 7def0e98e8 USB-MUX: auto-switch telemetry port based on UXB mux for ArduPlane 
when USB is unplugged, switch baud rate to the SERIAL3_BAUD rate from
EEPROM
 2011-11-25 20:00:19 -08:00
Andrew Tridgell 6093db948b compass: added AP_COMPASS_APM2_SHIELD 
this makes the orientation clearer
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 40459653b5 purple: fixed LED and IO pin defintitions 2011-11-25 20:00:18 -08:00
Andrew Tridgell ca76f6d0ec purple: add the remaining hw defines for purple hardware 2011-11-25 20:00:18 -08:00
Pat Hickey 08675a91d8 purple: added config options for purple/APM1 hardware 2011-11-25 20:00:17 -08:00
Amilcar Lucas ab730ff919 Added camera and/or antenna mount support. 
It is fully configurable with the mission planner, there is no need to change
the source code to adapt to your setup.
It needs more testing, but the SIL is not working for me.
 2011-10-31 22:55:58 +01:00
Andrew Tridgell 5a44298d57 CLI: enable "hit enter 3 times" support for CLI 
if you hit enter 3 times before you send any mavlink packets, we will
enter CLI mode
 2011-10-27 21:54:07 +11:00
Doug Weibel 9cbc38b516 Add a feature for a minimum altitude parameter while flying in FBW-B 
This patch written by YureZzZ - Thank you!
 2011-10-16 23:11:40 -06:00
Michael Oborne 7ef51f723d Sensor hil fix's 2011-10-13 22:22:03 +08:00
Andrew Tridgell e2ed1f1c56 removed some more unused defines 
mavlink is now the only choice for HIL and GCS
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 4437ff1046 get rid of the last active uses of the SendDebug macros 
please use gcs_send_text*() from now on, to ensure serial queueing
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 9baab490f1 HIL: first step in simplifying the HIL/GCS code 
this gets rid of the messy #ifdefs around HIL_PORT, and removes
non-MAVLink GCS and HIL support
 2011-09-19 11:04:01 +10:00
Doug Weibel 119d006e03 Change default setting for auto_trim to disabled per user (JB) request. 2011-09-12 07:24:52 -06:00
Amilcar Lucas b7a0d8836a This is the real HEAD of the APM_Camera branch. Seams that lots of changes got lost in the SVN to GIT port 2011-09-09 16:18:38 +02:00
Andrew Tridgell 609ae8359d import APM_Camera branch from SVN 2011-09-09 11:45:13 +10:00
Andrew Tridgell e0dc1271d6 imported ArduPlane from ArduPilotMega svn 2011-09-09 11:29:39 +10:00