Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
34,019 Commits 71 Branches 508 Tags 629 MiB
Commit Graph

17792 Commits

Author SHA1 Message Date
Peter Barker f2b8c9e501 RC_Channel: improve debug when failing to initialise RC channel 2018-08-21 20:34:01 +09:00
Peter Barker 2209e4a697 AP_HAL_ChibiOS: new HAL functor-based methods 
AP_HAL_ChibiOS: adjust for irq-type enumeration change

AP_HAL_ChibiOS: implement attach-AP_HAL::Proc to interrupt interface
 2018-08-21 20:34:01 +09:00
Peter Barker d366842d15 AP_WheelEncoder: move to using HAL's attach_interrupt methods 
AP_WheelEncoder: add error reporting for attaching of interrupts

AP_WheelEncoder: use detach_interrupt method

AP_WheelEncoder: correct initialisation of wheelencoder instances

AP_WheelEncoder: make update_phase_and_error_count non-static

AP_WheelEncoder: use (uint8_t)-1 in place of 255
 2018-08-21 20:34:01 +09:00
Peter Barker 20027bad17 AP_RPM: attach_interrupt now takes a functor 
AP_RPM: move PX4 IRQ handling into AP_HAL_PX4

AP_RPM: correct RPM sensor initialisation

The initialisation code used the type from the wrong configuration
parameters (if the first rpm sensor wasn't configured then the sensing
for the second sensor would use the type from the first).

The packing of drivers[...] was done in a non-sparse manner - i.e. if a
sensor wasn't detected then it would not take up space in the array.
The PX4 PWM backend relies on the instance number (offset in the drivers
array) corresponding to the parameters, so making this sparse is
required.

The main detection block fills in drivers based on the number of
instances detected so far, but the nullptr check checks based on the
number of detected backends.  If the second instance wasn't configured we
wouldn't attempt to configure a third.

AP_RPM: add error reporting for attaching of interrupts

AP_RPM: use detach_interrupt method

AP_RPM: use (uint8_t)-1 in place of 255
 2018-08-21 20:34:01 +09:00
Peter Barker 9b9ec4db40 AP_HAL_Empty: attach_interrupt now takes a functor 
AP_HAL_Empty: add type-safety for interrupt types
 2018-08-21 20:34:01 +09:00
Peter Barker 5180e025bb AP_HAL_SITL: attach_interrupt now takes a functor 
AP_HAL_SITL: add type-safety for interrupt types
 2018-08-21 20:34:01 +09:00
Peter Barker a7b79f7693 AP_HAL_VRBrain: attach_interrupt now takes a functor 
AP_HAL_VRBRAIN: add type-safety for interrupt types
 2018-08-21 20:34:01 +09:00
Peter Barker 8d5a9ead48 AP_HAL_Linux: attach_interrupt now takes a functor 
AP_HAL_Linux: add type-safety for interrupt types
 2018-08-21 20:34:01 +09:00
Peter Barker 4767666a2d AP_HAL_PX4: implement attach_interrupt 2018-08-21 20:34:01 +09:00
Peter Barker 74263f8412 AP_HAL: add attach_interrupt that takes a functor, not a AP_HAL::Proc 
AP_HAL: add type-safety for interrupt types

AP_HAL: remove interrupt-low and interrupt-high, and interrupt-none

It is possible that the radio needs very tight timings - do not force
the use of the functor interface

AP_HAL: add detach_interrupt method
 2018-08-21 20:34:01 +09:00
Peter Barker c846a13d12 AP_HAL: functor: add != override 2018-08-21 20:34:01 +09:00
Peter Barker a09154c45b AP_WheelEncoder: correct check for wheelencoder-max-instances 2018-08-21 20:34:01 +09:00
Peter Barker 21201b8816 AP_WheelEncoder: do not permit copies 2018-08-21 20:34:01 +09:00
Peter Barker 45ac3e6bb2 AP_BoardConfig: correct grammar in @DisplayName 2018-08-21 20:34:01 +09:00
Randy Mackay f536c53fa6 AP_MotorsMatrix: minor format fix 2018-08-21 13:34:07 +09:00
Michael du Breuil 588d1898cd AP_ServoRelayEvents: More robust check if a channel is available 2018-08-20 21:31:06 -07:00
Peter Barker df836ec70c AP_Notify: tidy and remove code duplications 
Saves 60 bytes, too
 2018-08-21 10:59:33 +10:00
Peter Barker 6daa241235 DataFlash: add sanity check for WritePrioritisedBlock size 2018-08-21 10:57:43 +10:00
Peter Barker 32bc1860de AP_Mission: starts_with_takeoff_cmd skips past mav_cmd_nav_delay 2018-08-20 14:15:40 +09:00
Peter Barker 9af11d79d1 AP_Mission: remove pointless else clauses 2018-08-20 14:15:40 +09:00
Andrew Tridgell 83f293305f AP_OSD: raise thread stack size to 1024 
based on testing in SITL
 2018-08-20 13:49:14 +10:00
Andrew Tridgell 836176297d HAL_SITL: added stack checking to SITL 2018-08-20 13:49:14 +10:00
Peter Barker 0a7399ae7d AC_PrecLand: use AHRS singleton, remove pointless initialisations 2018-08-17 21:14:57 +09:00
Peter Barker 898a46fe0e AP_Winch: undefine PASS_TO_BACKEND convenience function 2018-08-17 21:14:57 +09:00
Andrew Tridgell 60ec695f55 AP_TECS: set default pitch max to 15 2018-08-17 20:42:29 +10:00
Andrew Tridgell 7c57fb0c31 AP_L1_Control: lower default L1 period 2018-08-17 20:42:27 +10:00
Andrew Tridgell 9e2933df89 APM_Control: raised default PID gains for roll/pitch 2018-08-17 20:42:25 +10:00
Hwurzburg 53a28cdf18 AP_OSD: Adding efficiency and climb efficiency 
and new font characters
 2018-08-17 16:33:53 +10:00
Peter Barker e4d3ed7e39 RC_Channel: move handling of sprayer and gripper in from Copter 2018-08-17 15:33:35 +09:00
Peter Barker 4223d933d2 AC_Sprayer: add singleton 2018-08-17 15:33:35 +09:00
Andrew Tridgell 5988c3258f GCS_MAVLink: use Semaphore.h 2018-08-16 12:40:10 +10:00
Andrew Tridgell 5ac15714fd AP_Common: moved WITH_SEMAPHORE to Semaphore.h 2018-08-16 12:40:10 +10:00
Andrew Tridgell d3af854949 HAL_ChibiOS: fixed bootloader build 2018-08-16 12:40:10 +10:00
Andrew Tridgell a26e534654 GCS_MAVLink: use WITH_SEMAPHORE() 
this is a suggestion from Peter, will need some discussion
 2018-08-16 12:40:10 +10:00
Andrew Tridgell 6f058e8c0d AP_Common: added WithSemaphore class 2018-08-16 12:40:10 +10:00
Andrew Tridgell 048a52ebc0 GCS_MAVLink: make mavlink send from multiple threads safe 
this takes a lock to prevent interleaving of mavlink msgs from
multiple threads
 2018-08-16 12:40:10 +10:00
Andrew Tridgell 5de49aa5aa GCS_MAVLink: flush parameters on reboot 2018-08-16 12:40:10 +10:00
Andrew Tridgell f1e10b0a8f HAL_Linux: make uart writes thread safe 2018-08-16 12:40:10 +10:00
Andrew Tridgell b2b56c3e46 HAL_VRBRAIN: added support for HAL_Semaphore type 2018-08-16 12:40:10 +10:00
Andrew Tridgell 5d3b17db6b HAL_SITL: added support for HAL_Semaphore type 2018-08-16 12:40:10 +10:00
Andrew Tridgell fe93113240 HAL_PX4: added support for HAL_Semaphore type 2018-08-16 12:40:10 +10:00
Andrew Tridgell f005e60066 HAL_Linux: added support for HAL_Semaphore type 2018-08-16 12:40:10 +10:00
Andrew Tridgell dabdb969f6 HAL_ChibiOS: added support for HAL_Semaphore type 2018-08-16 12:40:10 +10:00
Andrew Tridgell 0a73c3492d AP_HAL: support HAL_Semaphore type 2018-08-16 12:40:10 +10:00
Andrew Tridgell 4d662a913a AP_Param: use background parameter save 
this moves both the storage scan and the save code out of the main
thread and into the IO thread. It means that if we have more than 30
parameters saves in very rapid succession while armed that we can lose
parameter changes, but that is extremely unlikely.

This fixes an issue where parameter saves in flight can cause
considerable scheduling problems, sometimes several milliseconds
 2018-08-16 12:40:10 +10:00
Hwurzburg 7c79175309 AP_OSD: add flytime item 2018-08-16 12:00:50 +10:00
Andrew Tridgell a0ce604721 AP_Stats: make singleton and add flighttime accessor 2018-08-16 12:00:50 +10:00
Hwurzburg 5f72c9040e AP_OSD: Adding flight distance and summary panels for OSD 2018-08-16 12:00:50 +10:00
Alexander Malishev eec34fc47d AP_OSD: add waypoint and xtrack_error items 2018-08-16 10:26:34 +10:00
vierfuffzig aae1054a94 AP_OSD: add hdop display 2018-08-16 09:39:02 +10:00
Peter Barker fa7ba7ddbc DataFlash: force messagewriters to completion 
Setting a dataflash-file buffer size of less than or equal to 2kiB would
cause the startup-messagewriter to never push any messages other than
FMT out to the logs.

This is a combination of the return values of
critical_message_reserved_space and
non_messagewriter_message_reserved_space

This patch forces the startup messages out to the logs by ignoring the
space constraints every 100ms
 2018-08-15 12:40:33 +10:00
Peter Barker fa5757f618 AP_Math: fix float-equals warnings 2018-08-15 12:16:49 +10:00
Alexander Malishev 05099b8b8b HAL_ChibiOS: restore default dataflash buffer size 
This fix log corruption in copter
 2018-08-15 10:15:09 +10:00
Andrew Tridgell 71988b49a4 AP_RSSI: allow override of RSSI pin 2018-08-15 09:51:30 +10:00
Andrew Tridgell c3cf8f5435 AP_Math: fixed a bug in segment_intersection() 
we could get an intercept point beyond the end of the segment
 2018-08-14 19:41:45 +10:00
Peter Barker 626467db14 AP_Math: add tests for line intersection 2018-08-14 19:41:45 +10:00
Francisco Ferreira 1b46104a98 AP_HAL_ChibiOS: fix warning when STDOUT is defined 
../../libraries/AP_HAL_ChibiOS/UARTDriver.cpp:118:12: warning: 'int hal_console_vprintf(const char*, va_list)' defined but not used [-Wunused-function]
 static int hal_console_vprintf(const char *fmt, va_list arg)
            ^
 2018-08-14 10:17:38 +10:00
Francisco Ferreira 62a4f08e12 AP_Arming: fix system check 2018-08-14 10:17:38 +10:00
mirkix c33b692f53 AP_HAL_ChibiOS: fix CubeYellow build 2018-08-14 06:26:22 +10:00
Lucas De Marchi 5068f2e8fd AP_HAL_Linux: fix log after tonealarm thread removal 
../../libraries/AP_HAL_Linux/Scheduler.cpp: In member function ‘void Linux::Scheduler::_debug_stack()’:
../../libraries/AP_HAL_Linux/Scheduler.cpp:127:47: warning: format ‘%zu’ expects a matching ‘size_t’ argument [-Wformat=]
                 _uart_thread.get_stack_usage());
                                               ^
 2018-08-12 20:29:35 -07:00
Francisco Ferreira f69638f24f
AP_UAVCAN: add configuration of hardware filters 2018-08-12 13:35:04 +01:00
Francisco Ferreira 3cb8421aa6
AP_UAVCAN: reorganize header and code 
Also a bit more cleanup
 2018-08-12 13:35:04 +01:00
Francisco Ferreira ee8e2923ae
AP_UAVCAN: cleanup code 2018-08-12 13:35:04 +01:00
Francisco Ferreira 8c382b6904
AP_UAVCAN: adapt to new CANProtocol interface 
This includes creating own thread

Also adapts example
 2018-08-12 13:35:03 +01:00
Francisco Ferreira 126f1379d3
AP_UAVCAN: fix bug introduced in #7863 2018-08-12 13:35:03 +01:00
Francisco Ferreira 7e8abc92fe
AP_UAVCAN: adapt to changes in AP_BoardConfig_CAN 2018-08-12 13:35:03 +01:00
Francisco Ferreira 861e1a0a54
SRV_Channel: adapt to changes in AP_BoardConfig_CAN 2018-08-12 13:35:03 +01:00
Francisco Ferreira 3b61a31bb4
AP_Notify: adapt to changes in AP_BoardConfig_CAN 2018-08-12 13:35:03 +01:00
Francisco Ferreira f468602baf
AP_Notify: revert wrong commit 228058e089 
Also change the order of logical OR so that led_write in UAVCAN_RGB_LED is called for all UAVCAN instances and not only first one
 2018-08-12 13:35:03 +01:00
Francisco Ferreira b29369eb82
AP_GPS: adapt to changes in AP_BoardConfig_CAN 2018-08-12 13:35:03 +01:00
Francisco Ferreira 317e8e0296
AP_Compass: adapt to changes in AP_BoardConfig_CAN 2018-08-12 13:35:03 +01:00
Francisco Ferreira 31b8a051cc
AP_BattMonitor: adapt to changes in AP_BoardConfig_CAN 2018-08-12 13:35:02 +01:00
Francisco Ferreira 8e6692744f
AP_BattMonitor: fix warning in UAVCAN driver 
../../libraries/AP_BattMonitor/AP_BattMonitor_UAVCAN.cpp: In member function ‘virtual void AP_BattMonitor_UAVCAN::init()’:
../../libraries/AP_BattMonitor/AP_BattMonitor_UAVCAN.cpp:15:123: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘AP_Int32 {aka AP_ParamT<int, (ap_var_type)3u>}’ [-Wformat=]
 #define debug_bm_uavcan(level, fmt, args...) do { if ((level) <= AP_BoardConfig_CAN::get_can_debug()) { printf(fmt, ##args); }} while (0)
                                                                                                                           ^
../../libraries/AP_BattMonitor/AP_BattMonitor_UAVCAN.cpp:36:33: note: in expansion of macro ‘debug_bm_uavcan’
                                 debug_bm_uavcan(2, "UAVCAN BattMonitor BatteryInfo registered id: %d\n\r", _params._serial_number);
 2018-08-12 13:35:02 +01:00
Francisco Ferreira 9489ec9e7c
AP_Baro: adapt to changes in AP_BoardConfig_CAN 2018-08-12 13:35:02 +01:00
Francisco Ferreira 5efde5fa8b
AP_HAL_VRBRAIN: adapt to changes in AP_BoardConfig_CAN 2018-08-12 13:35:02 +01:00
Francisco Ferreira 9766ca44d4
AP_HAL_PX4: adapt to changes in AP_BoardConfig_CAN 2018-08-12 13:35:02 +01:00
Francisco Ferreira b7a3e1ae77
AP_BoardConfig_CAN: put debug code behind compile-time flag 
And disable it by default
 2018-08-12 13:35:02 +01:00
Francisco Ferreira 4b4ba66987
AP_BoardConfig_CAN: add singleton and do naming cleanup 
Also added more getter methods
 2018-08-12 13:35:02 +01:00
Francisco Ferreira 1cfb38b4ee
AP_BoardConfig_CAN: adapt to new CANProtocol interface 2018-08-12 13:35:02 +01:00
Francisco Ferreira 350d03800f
AP_HAL_SITL: remove unused CAN header 2018-08-12 13:35:01 +01:00
Francisco Ferreira 9204ca898b
AP_HAL_VRBRAIN: remove CAN thread management 2018-08-12 13:35:01 +01:00
Francisco Ferreira 68ada13f28
AP_HAL_PX4: remove CAN thread management 2018-08-12 13:35:01 +01:00
Francisco Ferreira 1d7f3e48a4
AP_HAL_Linux: remove CAN thread management 
Also fix comment
 2018-08-12 13:35:01 +01:00
Francisco Ferreira 7278af05e0
AP_HAL_ChibiOS: remove CAN thread management 2018-08-12 13:35:01 +01:00
Francisco Ferreira 0645a5b11a
AP_HAL: introduce a CANProtocol interface and remove HAL CAN thread management 2018-08-12 13:35:01 +01:00
Francisco Ferreira e1bf89f32d
AP_HAL_ChibiOS: fix CAN manager initialization 2018-08-12 13:35:01 +01:00
Peter Barker 5ad1dee284 AP_Notify: make LED blink at constant rate in Rover 2018-08-09 11:57:05 +10:00
Michael du Breuil 83d01c8b7d GCS_MAVLink: Use ARRAY_SIZE to avoid a magic value 2018-08-09 11:53:05 +10:00
Michael du Breuil 6469a985d7 DataFlash: Fix allocating extra values for RC logging 2018-08-09 11:53:05 +10:00
Michael du Breuil e7ebea55d2 RC_Channel: Fix possible user induced out of bounds write 
CID 308348
 2018-08-09 10:27:10 +10:00
Andrew Tridgell 385f735799 HAL_ChibiOS: avoid 64 bit maths in AP_HAL::micros() 
this saves a few cycles
 2018-08-08 21:24:49 +10:00
fnoop bfceb5dd32 AC_PrecLand: Improve logging 
Add unit/multiplier of new fields to log structure
Fix new log structure
 2018-08-08 10:23:26 +09:00
Michael du Breuil f2b4e06a1a AP_Airspeed: Add 5"H2O DLVR differential sensor driver 2018-08-08 09:07:17 +10:00
Michael du Breuil d568767164 AP_Math: Add conversion between inches of water to pascals 2018-08-08 09:07:17 +10:00
Andrew Tridgell c9a830bf3f AP_Notify: support both NCP5623 addresses 2018-08-08 07:11:50 +10:00
Andrew Tridgell 935165a8f8 AP_Notify: tidy up NCP5623 driver 2018-08-08 07:11:50 +10:00
caijie a98d892dec AP_Notify: Add RGB LED driver for NCP5623 2018-08-08 07:11:50 +10:00
Andrew Tridgell 301884f7a6 AP_RCProtocol: fixed coverity error in SUMD 
CID308356
 2018-08-07 13:22:08 +10:00
Andrew Tridgell d1334fab73 AP_ROMFS: fixed error handling in tinflate 
coverity CID308327
 2018-08-07 13:22:08 +10:00
Michael du Breuil 4aff747b28 AP_RCProtocol: Fix out of bounds write, CID 308323 and 308333 2018-08-07 12:11:49 +10:00
Andrew Tridgell 3ed7c060df AP_Compass: address review comments 2018-08-07 10:00:10 +10:00
Jonathan Challinger cefd998177 AP_Compass: add expected DEV_ID parameters 2018-08-07 10:00:10 +10:00
Jonathan Challinger 878e84a015 AP_Compass: correct edge case where checks pass when saved dev_id != detected dev_id 2018-08-07 10:00:10 +10:00
Michael du Breuil ee9cc28fda AP_NavEKF2: Utilize the GPS drivers estimate for lag 2018-08-07 09:55:26 +10:00
Michael du Breuil 1a406dacfc AP_GPS: Ensure a lag value is always provided 
The value may not be the optimal value for the driver, but we should
always try to provide a value for the caller
 2018-08-07 09:55:26 +10:00
Michael du Breuil 21dfe02c6e GCS_MAVLink: always send an idea of battery voltage as part of 
BATTERY_STATUS
 2018-08-07 09:52:45 +10:00
Peter Barker e4ff937c96 RC_Channel: remove min-max-configured pre-arm checks 
These are really, really expensive to run while your RC isn't
configured.

We now have a split between inputs (RC) and servos (SRV), so these
aren't as critical as they were.  We also have range checks to ensure
they're roughly good enough to fly with.
 2018-08-07 09:45:09 +10:00
Peter Barker eaefdcfac2 AP_Arming: remove min-max-configured pre-arm checks 2018-08-07 09:45:09 +10:00
Peter Barker 87e7cc7ef0 RC_Channels: zero all channels before populating 
Fix for CID 308365
 2018-08-07 09:12:43 +10:00
vierfuffzig bc52d430f9 Chibios add bootloader for mini-pix 2018-08-07 07:09:39 +10:00
Andrew Tridgell f0fba01138 AP_Stats: use set_and_save_ifchanged() 
if the board has no GPS then the values usually don't change
 2018-08-06 21:46:06 +10:00
Randy Mackay 1c18d06aa3 AR_AttitudeControl: move unnecessary else 2018-08-06 11:30:22 +09:00
Randy Mackay 9b60e0844b AR_AttitudeControl: add get_desired_pitch accessor 2018-08-06 11:30:22 +09:00
Andrew Tridgell 846418e5e9 HAL_ChibiOS: raise timer thread priority 
needs to be above main for guaranteed DShot and oneshot output periods
 2018-08-06 11:41:42 +10:00
Randy Mackay c88926f227 Compass: remove accumulate from example sketch 2018-08-06 11:05:34 +10:00
Randy Mackay 99b54935db Compass: remove accumulate 
this method is a noop on all backends
 2018-08-06 11:05:34 +10:00
Peter Barker f2b1387c1c RC_Channel: add AUTOTUNE to init_aux_function routine 
Also, cark it in SITL if we fail to initialise an aux function
 2018-08-05 07:52:28 +10:00
Andrew Tridgell 53fbdc3750 AP_BLHeli: pass motor mask to serial_setup_output() 2018-08-04 19:29:13 +10:00
Andrew Tridgell 3df2a1c228 HAL_ChibiOS: fixed dshot bad frames 
adding a pre-bit on the DMAR, and ensuring that all groups are setup
for DMA together fixes the remaining bad frames reports in BLHeli32
 2018-08-04 19:29:13 +10:00
Andrew Tridgell 1fe6c7b497 AP_HAL: added chanmask to serial_setup_output() 2018-08-04 19:29:13 +10:00
Andrew Tridgell 946b4db0e6 HAL_ChibiOS: set min dshot separation to 100usec 
this fixes a problem with BLHeli32 not recognising dshot
 2018-08-04 19:29:13 +10:00
Andrew Tridgell 476a40c906 AP_BLHeli: improved reliability of pass-thru support 
this uses a connection cache to prevent re-connecting to an ESC when
not needed, and allows for pass-thru comms on any port, using
SERVO_BLH_PORT parameter
 2018-08-04 19:29:13 +10:00
Andrew Tridgell 22ba9a0aea HAL_ChibiOS: fixed timeout of serial read bytes 
this allows for fast timeout of serial read bytes in BLHeli pass-thru
 2018-08-04 19:29:13 +10:00
Andrew Tridgell df643d8499 GCS_MAVLink: allow uninstall of alt protocol handler 2018-08-04 19:29:13 +10:00
Andrew Tridgell 769c99d4d7 AP_Baro: added register checking on BMP280 
this follows a log which seems to show an in-flight register
corruption on a MatekF405
 2018-08-04 16:44:08 +10:00
Lucas De Marchi 88df4d127e AP_Common: remove ARRAY_SIZE_SIMPLE 
Now this is basically ARRAY_SIZE, so remove it.
 2018-08-04 15:31:55 +10:00
Lucas De Marchi 668c941717 Global: use new version of ARRAY_SIZE 2018-08-04 15:31:55 +10:00
Lucas De Marchi 57ee0e29f6 AP_Common: simplify ARRAY_SIZE 
This rolls back to the simpler version of ARRAY_SIZE. The more complex
one helps catching bugs when we use pointers when we are expecting an
array, but can't stand arrays with 0 elements.  I'm not aware of bugs it
actually caught on ArduPilot, although it did for me in other projects.

I think this is better than having a separate "_SIMPLE" version of the
macro and spread its usage... the trend is just to use the simpler
version anyway.
 2018-08-04 15:31:55 +10:00
Peter Barker 049f61c943 AP_Camera: populate camera singleton 2018-08-04 11:34:41 +10:00
utkinpol 2912e732b4 HAL_ChibiOS: updated for KakuteF7 2018-08-04 08:24:49 +10:00
Andrew Tridgell 64c8ca514c HAL_ChibiOS: fixed attach_interrupt check 
we can't have two handlers on the same pad
 2018-08-03 13:44:59 +10:00
Andrew Tridgell 4e6ac85057 HAL_ChibiOS: use 32 bit time intervals 
this makes for smaller and faster code. We really don't need 64 bit
intervals as long sleeps are done with a loop.
 2018-08-03 13:44:59 +10:00
Andrew Tridgell 1bd0ea079b HAL_ChibiOS: fixed build on older compilers 
allow build with gcc 4.9.x
 2018-08-03 13:44:59 +10:00
Andrew Tridgell 7aba99e229 HAL_ChibiOS: fixes for ChibiOS version update 2018-08-03 13:44:59 +10:00
Andrew Tridgell f8e2edbc7f HAL_ChibiOS: fixed cache flush for updated ChibiOS version 2018-08-03 13:44:59 +10:00
Siddharth Purohit 2604b00b43 HAL_ChibiOS: use ch.h header for oslib api 2018-08-03 13:44:59 +10:00
Siddharth Purohit ea709b9316 AP_Radio: move to using updated time conv API 2018-08-03 13:44:59 +10:00
Siddharth Purohit 9f5dbb74e7 AP_IOMCU: move to using updated time conv API 2018-08-03 13:44:59 +10:00
Siddharth Purohit ff65487ab3 HAL_ChibiOS: follow updated gpio pin setup procedure 2018-08-03 13:44:59 +10:00
Siddharth Purohit 5f88163e17 HAL_ChibiOS: update configuration and rtlib headers for ChibiOS 18.x.x 2018-08-03 13:44:59 +10:00
Siddharth Purohit 395c48933c HAL_ChibiOS: move tto using updated time conversion API 2018-08-03 13:44:59 +10:00
Siddharth Purohit 4e8d072d6d HAL_ChibiOS: move to using recent pal driver api for GPIO IRQ events 2018-08-03 13:44:59 +10:00
Mark Whitehorn 86b7adf68f AP_HAL_Chibios: fix fmuv3/hwdef.dat printf/STDOUT description and clean up 2018-08-03 13:08:37 +10:00
Peter Barker aa4cf5b40e SRV_Channel: use method to get rc channels 2018-08-03 13:07:50 +10:00
Peter Barker ff36eb3aca RC_Channel: remove old members objects 2018-08-03 13:07:50 +10:00
Matt 15823d9e97 AP_LANDING_GEAR: Remove deploy lock 
Since the RC switches only respond to changes, there is no longer a need
for this lock state. The gear can be retracted or deployed by RC switch,
flight mode, or mavlink command freely without convoluted unlocking
methods.  Also removed use of this in the associated Copter code.
 2018-08-03 10:59:15 +09:00
Lucas De Marchi 73f8dd98f2 AP_BoardConfig: kill AP_FEATURE_SAFETY_BUTTON 
This is redundant and can be just HAL_HAVE_SAFETY_SWITCH.
 2018-08-02 13:15:02 -07:00
Lucas De Marchi 259195a7c7 AP_BoardConfig: fix handling of AP_FEATURE_SAFETY_BUTTON 
Not all PX4-based board have a safety button. Rely on
HAL_HAVE_SAFETY_SWITCH instead of ifdef'ing each of them.

This allows to build for aerofc-v1 without safety button.
 2018-08-02 13:15:02 -07:00
Lucas De Marchi 000ae3cb85 AP_BoardConfig: add default for BOARD_SAFETY_ENABLE 
If HAL supports safety button but the board didn't declare a default,
define one to match what is done with BOARD_SAFETY_OPTION_DEFAULT.
 2018-08-02 13:15:02 -07:00
Lucas De Marchi 099eefee87 AP_HAL: Chibios: HAL_GPIO_PIN_SAFETY_IN implies HAL_HAVE_SAFETY_SWITCH 2018-08-02 13:15:02 -07:00
Lucas De Marchi 20778f73f1 AP_HAL_ChibiOS: define HAL_HAVE_SAFETY_SWITCH accordingly 2018-08-02 13:15:02 -07:00
Lucas De Marchi 8e3777a163 AP_HAL_PX4: RCOutput: honour HAL_HAVE_SAFETY_SWITCH 2018-08-02 13:15:02 -07:00
Lucas De Marchi 7f984f2700 AP_HAL: linux: disable safety switch 
Linux boards don't really handle the safety switch.
 2018-08-02 13:15:02 -07:00
Lucas De Marchi 2336d2214b AP_HAL: sitl: disable safety switch 
sitl doesn't really handle the safety switch and it's actually disabled
by AP_FEATURE_SAFETY_BUTTON.
 2018-08-02 13:15:02 -07:00
Andrew Tridgell 13f96bcb00 HAL_ChibiOS: fixed an i2c dma callback bug 
many thanks to Kelly-Foster for chasing me on this one!
 2018-08-02 12:29:02 +10:00
Andrew Tridgell b0badf8caf HAL_ChibiOS: fixes for F745 builds 2018-08-02 11:56:33 +10:00
Lucas De Marchi 0606b00f15 AP_BoardConfig: don't try to set pwm mode for aerofc-v1 
We don't have that in aerofc, so don't try to initialize it and fail
with following error messages:

    RCOutput: unable to setup AUX PWM with BRD_PWM_COUNT 0
 2018-08-01 16:49:08 -07:00
Randy Mackay 9799567416 AP_Follow: fixup offset initialisation 2018-08-01 20:18:23 +09:00
hoangthien94 f4255712c1 AP_Follow: Initialize offsets based on offset type 2018-08-01 20:18:23 +09:00
Peter Barker 5df70cf93a RC_Channel: update examples for new rc() method 2018-08-01 12:11:30 +09:00
Peter Barker e2b31a535c AC_PID: update example for new rc() method 2018-08-01 12:11:30 +09:00
Peter Barker 0f084ed5bf RC_Channel: add compatability static functions 
Just to avoid churn in Sub, Plane and Tracker
 2018-08-01 12:11:30 +09:00
Peter Barker c1a1f4f970 SRV_Channel: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker dbccd6a399 GCS_MAVLink: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker f4c93dc697 DataFlash: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker c209152d13 AP_Tuning: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker 497746c3d0 AP_RSSI: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker 2489234fcf AP_Mount: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker 80a4083fc7 AP_ICEngine: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker 1eacd685e3 AP_Arming: use rc() method to get rc singleton 2018-08-01 12:11:30 +09:00
Peter Barker 747fc3814d RC_Channel: rename in_rc_failsafe to has_valid_input 2018-08-01 12:11:30 +09:00
Peter Barker 61c34ea98c RC_Channel: move handling of auxillary switches into RC_Channel 
RC_Channel: move handling of Rover's functions into RC_Channel

RC_Channel: move auxsw handling for camera to base RC_Channel

RC_Channel: add responsibility for servorelay events

RC_Channel: move mode switch handling to base class
 2018-08-01 12:11:30 +09:00
Peter Barker 007434cdac AC_Sprayer: move Copter CHn_OPT to RC_Channel RCn_OPTION 2018-08-01 12:11:30 +09:00
Peter Barker fb786b8d56 AP_Camera: add singleton 2018-08-01 12:11:30 +09:00
Andrew Tridgell 44fd85ff29 HAL_ChibiOS: reduce memory used by serial buffers 
this does not appear to affect log download speed. It saves about 27k
of memory
 2018-08-01 13:11:16 +10:00
Peter Barker ce62b2303a DataFlash: add ability to log-disarmed 2018-08-01 11:28:52 +09:00
Michael du Breuil 1e699a53f6 AP_Landing: Fix misspelling in deepstall docs 2018-08-01 09:24:26 +10:00
Michael du Breuil 8357b31e57 AP_Relay: Remove APM doc references 2018-08-01 09:24:26 +10:00
Michael du Breuil f0a4059d73 AP_Rangefinder: Remove APM doc references 2018-08-01 09:24:26 +10:00
Michael du Breuil 2134373646 AP_RSSI: Remove APM doc references 2018-08-01 09:24:26 +10:00
Michael du Breuil e82663baf2 AP_BattMonitor: Remove APM doc references 2018-08-01 09:24:26 +10:00
Michael du Breuil 6225f51815 AP_Airspeed: Remove APM doc references 2018-08-01 09:24:26 +10:00
Michael du Breuil fd9f9cdfe0 AP_BattMonitor: Removed the need to set the battery_voltage flag 2018-08-01 09:22:09 +10:00
Michael du Breuil a5e974c227 AP_Notify: Reduce flash consumption, fix some drivers, always allow 
buzzer
 2018-08-01 09:22:09 +10:00
Michael du Breuil cca6b54921 AP_GPS: Remove unneeded field limitations 
Saves ~1100 bytes of flash
 2018-08-01 09:19:20 +10:00
Michael du Breuil 80313abf31 SRV_Channel: Remove useless read from manual passthrough 2018-08-01 09:19:20 +10:00
Michael du Breuil 60f19bbf02 RC_Channel: Allow an input to be ignored 2018-08-01 09:19:20 +10:00
Pierre Kancir 37f7cc4bcf SITL: rearrange Grippers and Sprayers in SITL 2018-07-31 23:34:43 +10:00
Pierre Kancir 96c54550e5 AP_HAL_SITL: rearrange Grippers and Sprayers in SITL 
Adds parameters to configure and disable
 2018-07-31 23:34:43 +10:00
Andrew Tridgell 8b4b38bcb2 DataFlash: removed "no io thread heartbeat" msg 2018-07-31 19:37:17 +10:00
Hwurzburg 19f44f80ad HAL_ChibiOS: Added Omnibus F4 NanoV6 (only V6) 
bench tested all ports
 2018-07-30 19:32:29 +10:00
Andrew Tridgell 4026b9f49d HAL_ChibiOS: probe all external compasses on mini-pix 2018-07-30 17:26:19 +10:00
Andrew Tridgell 2ded88e611 AP_Compass: allow override of QMC5883L orientation 2018-07-30 17:26:19 +10:00
Andrew Tridgell 397ba488db AP_Notify: use NTF_BUZZ_ENABLE to disable tonealarm 2018-07-30 15:42:58 +10:00
Randy Mackay cb3731e08e Compass: fix compile warning in calibrator output 2018-07-30 14:57:01 +10:00
Andrew Tridgell 1eb010fbf1 AP_Notify: reduced tone buffer size 
100 is plenty
 2018-07-30 14:02:12 +10:00
Andrew Tridgell bdca329012 HAL_PX4: fixes for new tone_alarm system 
we need to start the driver
 2018-07-30 14:02:12 +10:00
Andrew Tridgell b11bd33b0e AP_Notify: removed extra call to play_string 2018-07-30 14:02:12 +10:00
Andrew Tridgell d28c8f0214 AP_Notify: added duration to toneAlarm_set_buzzer_tone 2018-07-30 14:02:12 +10:00
Andrew Tridgell 22d588146e HAL_PX4: added duration to toneAlarm_set_buzzer_tone 2018-07-30 14:02:12 +10:00