dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
39,464 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

1748 Commits

Author SHA1 Message Date
Daniel Agar ad1bfb5410 Tools/HIL/reboot.py retry every 90 seconds for up to 5 minutes 2021-12-12 11:53:01 -05:00
Daniel Agar b71b908ac7 Tools/HIL: explain cmd, use monotonic time 2021-12-11 15:02:49 -05:00
Beat Küng aa96e39306 kconfig: do not inherit for recovery.px4board from default.px4board 2021-12-10 09:03:08 -05:00
PX4 BuildBot 16621b19b3 Update submodule sitl_gazebo to latest Fri Dec 10 00:38:56 UTC 2021 
- sitl_gazebo in PX4/Firmware (95222baa33): ffb87ef4a3
    - sitl_gazebo current upstream: 27298574ce
    - Changes: ffb87ef4a3...27298574ce

    2729857 2021-12-06 Silvan Fuhrer - Plane.sdf: reduce flaps and aileron effectiveness by reducing the angle-to-lift ratio
 2021-12-09 20:52:31 -05:00
Daniel Agar f9faa97d85 Tools/HIL/run_nsh_cmd.py increase timeout 3->4 minutes 2021-12-06 17:51:03 -05:00
PX4 BuildBot 01192e3c37 Update submodule simulation-ignition to latest Sun Dec 5 12:38:56 UTC 2021 
- simulation-ignition in PX4/Firmware (4e3d944f58): 0ea4dbe2c3
    - simulation-ignition current upstream: 483193d9b8
    - Changes: 0ea4dbe2c3...483193d9b8

    483193d 2021-11-27 JaeyoungLim - Merge pull request #2 from PX4/pr-upstream-merge
4f3fd67 2021-11-27 Jaeyoung-Lim - Merge remote-tracking branch 'origin/master' into pr-upstream-merge
bd96d89 2021-11-27 Jaeyoung-Lim - Use mavlink develop dialect
bba86d6 2021-11-27 Jaeyoung-Lim - Fix firmware build test on github actions
e78ad94 2021-09-04 Jaeyoung-Lim - Update Readme
63ac33c 2021-09-03 Jaeyoung-Lim - Rename world path to accomodate different models
794a8dc 2021-07-12 Jaeyoung-Lim - Add ignition gazebo firmware build test
 2021-12-05 19:23:55 -05:00
PX4 BuildBot 2870b5bbb1 Update submodule sitl_gazebo to latest Sat Nov 27 12:38:16 UTC 2021 
- sitl_gazebo in PX4/Firmware (d0c931353b047cfe6340b11866c814aa0d43fd34): 60d6844e17
    - sitl_gazebo current upstream: ffb87ef4a3
    - Changes: 60d6844e17...ffb87ef4a3

    ffb87ef 2021-11-24 Thomas Stastny - sync baro and diff pres calculations in airspeed and baro plugins
a1d9dfa 2021-11-23 Bearixal - Windy World: Fixed Naming of Parameter according to wind_plugin.cpp and added missing ones. (#830)
71d8a41 2021-11-17 Jaeyoung-Lim - Remove unused configs in windyworld
 2021-11-27 11:14:32 -05:00
Daniel Agar 585fa12209 Jenkins HIL improve SD testing 2021-11-25 13:11:45 -05:00
Beat Küng 312d84ca23 metadata: run json schema validation for actuators + parameter metadata 2021-11-23 12:40:22 -05:00
Beat Küng 357a16aca6 pwm_out_sim: split module.yaml into HIL+SIM files 2021-11-23 12:40:22 -05:00
Beat Küng 36296794c8 module config: add generate_actuators_metadata.py script 2021-11-23 12:40:22 -05:00
Beat Küng 36d9635518 output_functions.yaml: allow single-instance entry with 'start' but no 'count' 
for other additional data
 2021-11-23 12:40:22 -05:00
Beat Küng 2ff6baa250 actuator params: use module_name as prefix to channel label 2021-11-23 12:40:22 -05:00
Beat Küng 6537f480b1 module.yaml: make long param description optional 
Some params are very simple and don't need more.
 2021-11-23 12:40:22 -05:00
Daniel Agar 1b7f4b6003 Jenkins HIL test loading all airframes 2021-11-23 12:38:41 -05:00
Jaeyoung-Lim af7fa63480 Remove kconfig-frontends installation from setup.sh 2021-11-23 15:17:00 +01:00
Daniel Agar c4de9f67a1 Jenkins: HIL add simple reboot script that fails on any ERROR 2021-11-22 11:27:45 -05:00
PX4 BuildBot 643002bd86 Update submodule sitl_gazebo to latest Mon Nov 22 12:39:01 UTC 2021 
- sitl_gazebo in PX4/Firmware (c73028bb1b): 607aa4d990
    - sitl_gazebo current upstream: 60d6844e17
    - Changes: 607aa4d990...60d6844e17

    60d6844 2021-11-16 wangwwno1 - Format: Remove extra spaces
e233c6d 2021-11-16 wangwwno1 - Enhance: fuse accel rotation
e8a7f89 2021-11-16 wangwwno1 - Fix: convert accel frame to local NED
 2021-11-22 09:12:23 -05:00
Beat Küng 7faaad79d0 generate_params.py: add PWM_AUX_* for boards w/o IO and >8 channels 2021-11-22 09:07:23 -05:00
Max Elfgen 7f5fa3d1f7 Using RTPS as a label resulted in the PX4 instance crashing. Removing the label fixed the problem. 2021-11-19 20:30:46 +01:00
Jani Paalijarvi 02336acd61 Improve SPI bus implementation 
Make possible to define chip-select pin for internal SPI.
By defining chip-select pin, it's possible to start specific SPI device only.
This allows to have several same type of sensors on the same bus with different orientation.
 2021-11-19 07:47:18 +01:00
Daniel Agar 96bf3aa5d0
matrix: apply PX4 astyle 2021-11-16 12:30:51 -05:00
PX4 BuildBot 4a66c8c4c4 Update submodule sitl_gazebo to latest Tue Nov 16 00:39:15 UTC 2021 
- sitl_gazebo in PX4/Firmware (f5d9b01f5c): 1c8c919710
    - sitl_gazebo current upstream: 607aa4d990
    - Changes: 1c8c919710...607aa4d990

    607aa4d 2021-11-15 Alexander Funke - Wind Plugin: Fixed typo in windGustVelocityMean. Closes #825, fixes #812 Fixed the typo in windGustVeloctiyMean to windGustVelocityMean, so that the parameter in the world file can be correctly read and the mean gust velocity properly set to the parameter's value.
 2021-11-15 23:13:43 -05:00
Daniel Agar f5d9b01f5c
NuttX build in place 
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
 2021-11-15 18:47:38 -05:00
Daniel Agar 5e3701a365 Tools/check_submodules.sh: perform submodule sync again after first update to reach nested submodules 2021-11-10 13:52:51 -05:00
Matthias Grob 6fab6242db setup/python requirements: add future module 
which is a requirement for MAVLink header generation.
Found on Ubuntu 20.04 Python 3.
 2021-11-08 17:05:30 +01:00
Daniel Agar 3b68f8e510 Tools/check_submodules.sh revert attempted submodule improvements 
- this wasn't helping break out of submodule issues
 2021-11-07 20:36:47 -05:00
Daniel Agar f43adaeeb5
Tools/check_submodules.sh disable parallel jobs 
- this is already run separately for each submodule (potentially in parallel)
 2021-11-07 18:12:30 -05:00
Daniel Agar 24b00317b5
Tools/check_submodules.sh attempt update before sync to handle changes 2021-11-07 16:00:13 -05:00
Jacob Crabill 5969508fa7
mavlink: cmake generate mavlink headers at build time 
- mavlink/mavlink is now directly included as a submodule instead of the generated mavlink/c_library_v2
 - this also switches to mavlink development.xml by default
 2021-11-05 23:01:38 -04:00
Peter van der Perk c6f249f7f1 Kconfig merge_config only set to 'n' when BOOL 
Run make updateconfig to fix delta's of derived configs
 2021-11-02 09:34:21 -04:00
PX4 BuildBot 7006b0aee9 Update submodule jMAVSim to latest Thu Oct 28 12:38:55 UTC 2021 
- jMAVSim in PX4/Firmware (c9b89ee869): 0a5a8c6d9d
    - jMAVSim current upstream: b23dc53d55
    - Changes: 0a5a8c6d9d...b23dc53d55

    b23dc53 2021-10-08 Ilya Petrov - Use low resolution texture also on Windows
 2021-10-28 11:41:02 -04:00
Peter van der Perk 51abb804ac UAVCANv1 Fix NodeClient header and Kconfig merge logic 2021-10-27 10:07:01 -04:00
Peter van der Perk 24ab430466
Tools/generate_board_targets_json.py: fix json board targets regression from #17100 2021-10-26 16:15:39 +02:00
Matthias Grob 3d50adc5fe astyle: restore backwards compatibility with old pre-commit hook 
I removed the filtering logic from the shell script in #18482 because
the new pre-commit hook already takes care of it.

The problem is if you don't update the .git/hooks/pre-commit file and
use the new shell script there's no filtering
of files done and it checks all files for every file.

This commit restores backwards compatibility because it does not hurt
until I have an automatic way to update the pre-commit hook file.
 2021-10-22 12:56:21 +02:00
Matthias Grob 6938d24ec7 pre-commit hook: show all style issues, not just the ones from the first file 2021-10-21 19:07:13 -04:00
Matthias Grob 2716ce7a56 pre-commit hook: clear output with error, file name, diff, instructions 2021-10-21 19:07:13 -04:00
Matthias Grob 4454fe9770 pre-commit hook: don't unstage the entire file containing a style issue 2021-10-21 19:07:13 -04:00
mcsauder 21163d859e Whitespace cleanup. 2021-10-19 13:29:26 -04:00
Beat Küng f1686b1abf px4io: add dynamic mixing support 2021-10-18 18:45:19 -04:00
Beat Küng ab1d76ae7d params: use PWM_MAIN_* instead of PWM_FMU_* 2021-10-18 18:45:19 -04:00
Beat Küng 319e90961b output_groups_from_timer_config.py: fix timer index 
The implementation assumed timers are defined in the same order as used
in the channels. This could lead to a mismatch between TIMx param and
actual timer config.
Now we use the actual array index, same as in the code.
 2021-10-18 18:45:19 -04:00
Beat Küng 44bbe87165 pwm_out_sim: use PWM_FMU for sitl and HIL_ACT for hitl 
We might want to change this later, but for now it allows to use the same
airframe configs for sitl/real, and independent hitl configuration.
 2021-10-18 18:45:19 -04:00
Beat Küng 916447e804 params: add script to parse timer_config.cpp for timer group info 
This allows to generate pwm params in the form of:
module_name: PWM Output
actuator_output:
  output_groups:
    - generator: pwm
      param_prefix: PWM_FMU
      channel_labels: ['PWM Main', 'PWM Capture']
      standard_params:
        disarmed: { min: 800, max: 2200, default: 900 }
        min: { min: 800, max: 1400, default: 1000 }
        max: { min: 1600, max: 2200, default: 2000 }
        failsafe: { min: 800, max: 2200 }
      extra_function_groups: [ pwm_fmu ]
      pwm_timer_param:
        description:
            short: Output Protocol Configuration for ${label}
            long: |
                Select which Output Protocol to use for outputs ${label}.

                Custom PWM rates can be used by directly setting any value >0.
        type: enum
        default: 400
        values:
            -5: DShot150
            -4: DShot300
            -3: DShot600
            -2: DShot1200
            -1: OneShot
            50: PWM50
            100: PWM100
            200: PWM200
            400: PWM400
        reboot_required: true
 2021-10-18 18:45:19 -04:00
Beat Küng db28ea9cfa generate_params.py: extend params 'definitions' section to support a list 
allows to add multiple entries for a multi-instance param with different
instance_start
 2021-10-18 18:45:19 -04:00
Beat Küng 6f01b69f49 mixer_module: add param generation for disarmed, min, max, failsafe 2021-10-18 18:45:19 -04:00
Beat Küng 6424faccb1 generate_params.py: fix parse_yaml_parameters_config 
Correctly handle multiple parameter sections
 2021-10-18 18:45:19 -04:00
Beat Küng c55626d2d6 refactor Tools/serial: move non-serial param generation into separate script 2021-10-18 18:45:19 -04:00
David Lechner 426efb515f setup: fix installing in virtual env on Ubuntu 
This fixes running the Ubuntu setup script in a Python virtual
environment. This was failing because pip doesn't allow the --user
option in virtual environments.
 2021-10-13 16:19:24 -04:00
Peter van der Perk b3e799e277 [Kconfig] Add all distance sensors 2021-10-07 10:09:01 -04:00