- for FW the primary range finder usage is estimating the distance to
the ground (terrain estimate) to guide the landing approach and initiate flare
- increase EKF2_RNG_QLTY_T default 1->3 seconds
* added a new driver ASP5033 for measuring the differential pressure and airspeed
---------
Co-authored-by: nano <nanobotzhe@abv.bg>
Co-authored-by: Denislav Petrov <you@example.com>
* [not-working] add a gz-omnicopter model
* Fix axis directions on omnicopter model
The omnicopter joint axis directions had to be adapted for sdf 1.9 as it has different conventions for joint axis definitions.
* include model from gz-fuel & remove mesh files
* Fix omnicopter model using fuel
---------
Co-authored-by: Jaeyoung Lim <jalim@ethz.ch>
This adds support for the TI LP5562 RGB LED driver.
Things to note:
- The driver is initialized in simple PWM mode using its internal clock,
for R,G,B, but not for W(hite).
- The chip doesn't have a WHO_AM_I or DEVICE_ID register to check.
Instead we read the W_CURRENT register that we're generally not using
and therefore doesn't get changed.
- The current is left at the default 17.5 mA but could be changed using
the command line argument.
Datasheet:
https://www.ti.com/lit/ds/symlink/lp5562.pdf
Signed-off-by: Julian Oes <julian@oes.ch>
5s is a more reasobale time for tailsitters, which rely differently on this param
than other VTOL types. Tailsitters will ramp the pitch up withing this time,
while for other VTOLS types its only the max transitiont time.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
This is now using the advanced lift drag plugin.
The important step was to enable airmode for yaw, otherwise yaw gets
saturated at low throttle and we can barely roll.
The other trick was to raise airspeed a little bit to avoid operating
too much at the lower end of throttle where control authority is low.
Signed-off-by: Julian Oes <julian@oes.ch>
- re-enable once the estimator selector respects configured mag
priority (at least initially) or is otherwise able to automatically
prefer an external mag over internal
- for SITL disabled because the full matrix of esitmator instances
(IMUs X mags) was too many topics for logger currently
A default of 10s makes more sense compared to the old 4s, as this is only the
max time of a back transition and it's also decleared completed if the
speed drops below the hover cruising speed (MPC_XY_CRUISE).
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
There have been substantial TECS changes lately, and the config files
for custom VTOLs have not been updated since a long time. I would thus
rather use the default TECS gains for lightly maintained configs.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
* Port of the PX4 Vision gazebo-classic model to Gazebo. With Gazebo Garden, everything seems functionnal.
* Port of the PX4 Vision gazebo-classic model to Gazebo.
With Gazebo Garden, everything seems functionnal.
* Added airframe for command make px4_sitl gz_px4vision
* revert author field
* Import model from Ignition Fuel instead of defining it directly in the .sdf
- multi-instances support is removed from the parameter definitions.
- XRCE_DDS_AG_IP allows to define the agent IP when udp transport is used.
The parameter is used by default if the module is started without the -h argument.
- XRCE_DDS_PRT allows to define the agent listning udp port when the
udp transport is uded. The parameter is used by default if the module is started
without the -p argument.
- Tools/convert_ip.py assists in converting ips in decimal dot notation into int32
notation.
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
The attitude frame is wrong for tailsitters doing side slip fusion for wind estimation.
It doesn't take into account that the frames is 90deg tilted in FW flight.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Set this flag to true if local position is valid but accuracy low, such that
the operator can be warned before system switches to position-failure failsafe.
Additionally, switch to RTL if currently in Mission or Loiter to try to reach home
or fly out of GNSS-denied area.
Set low accuracy threshold to 50m by default for FW and VTOL.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
- use `gazebo-classic` everywhere consistently referring to the original Gazebo (eg version 9,10,11)
- additional `gazebo_*` helper targets added for compatibility, but warn about deprecation and tell you the new target naming
- use `gz` everywhere when referring to Gazebo (aka Ignition Gazebo or new Gazebo)
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
Multiple agents can connect to the same client
For sitl builds, if the intance number is different from zero,
XRCE_DDS_KEY is set to the instance number and
the microdds_client is automatically started
with namespace
px4_"instance_number"
and udp port 8888
If the instance number is equal to zero
XRCE_DDS_KEY is left untouched and
the microdds_client is automatically started
without namespace
and udp port 8888
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
The partecipant name is modified into
"client_namespace"/px4_micro_xrce_dds
For sitl builds the microdds_client is automatically started
with namespace
px4_"instance_number"
and udp port
8888+"intance_number"
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
Add ARK_FMU_V6X to RCS netman
Remove arkv6x rc single wire
Fix arkv6x mtd
arkv6x bootloader init all pins to prevent power cycling peripherals on boot
arkv6x don't power cycle sd card on boot
arkv6x add UART4 Telem 4
landing airspeed was previously defined by a scale factor multiplied by minimum airspeed. this commit changes this parameter to an explicit speed, and when unspecified, defaults to the minimum airspeed
MIS_LTRMIN_ALt was used to limit the go-to altitude of a LOITER_TO_ALT (not the exit altitude,
but the altitude that the vehicle went to to fly to WP), and during landing abort to climb to
at least this altitude. The min entry altitude of LOITER_TO_ALT I remove with this commit, while
for the min alt during abort I added the new parameter MIS_LND_ABRT_ALT.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Replace the existing check for the availability of a takeoff mission item with a combined
check for takeoff and landing item (or landing pattern). New param MIS_TKO_LAND_REQ
can be set to require only a takeoff, only a landing, both takeoff and landing, and
both or none. The latter is meant to be set if is e.g. deemed unsafe to start a flight
through a Takeoff WP without though defining a Landing - as then in case of a RTL the
vehicle doesn't follow a pre-defined path but instead only can do default RTL that especially
for FW and VTOL isn't always safe.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Vincent Poon
Silvan Fuhrer
Matthias Grob
Daniel Agar
Denislav Petrov
Daniel Mesham
Dusan Zivkovic
Beat Küng
Ayham Alharbat
Theotime Balaguer
Julian Oes
Josh Henderson
JaeyoungLim
Alejandro Hernández Cordero
alexklimaj
Beniamino Pozzan
bresch
Thomas Stastny
TheotimeBlg
Frederic Taillandier
Tony Samaritano
Konrad
Benjamin Perseghetti
murata
Peter van der Perk