.. |
BeastF7
|
HAL_ChibiOS: save flash on boards that are critically low
|
2021-04-13 09:58:59 +10:00 |
BeastH7
|
AP_HAL_ChibiOS: correct current scale for BeastH7 and BeastF7
|
2021-04-07 17:25:19 +10:00 |
CUAV-Nora
|
AP_HAL_ChibiOS: CUAV X7/Nora: use icm42688 instead of bmi088
|
2021-06-03 13:57:27 +10:00 |
CUAV-X7
|
AP_HAL_ChibiOS: CUAV X7/Nora: use icm42688 instead of bmi088
|
2021-06-03 13:57:27 +10:00 |
CUAV-X7-bdshot
|
AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
|
2021-02-03 18:49:06 +11:00 |
CUAV_GPS
|
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
|
2021-05-19 17:38:47 +10:00 |
CUAVv5
|
AP_HAL_ChibiOS: Correct the README.md for fmuv5 boards
|
2019-07-12 10:59:48 +01:00 |
CUAVv5-bdshot
|
AP_HAL_ChibiOS: bdshot version of CUAVv5
|
2021-09-10 14:08:46 +09:00 |
CUAVv5Nano
|
AP_HAL_ChibiOS: standard spelling of variant
|
2020-12-25 00:01:50 +11:00 |
CUAVv5Nano-bdshot
|
AP_HAL_ChibiOS: bdshot version of CUAVv5Nano
|
2021-09-10 14:08:46 +09:00 |
CubeBlack
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
CubeBlack+
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
CubeBlack-periph
|
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
|
2021-05-19 17:38:47 +10:00 |
CubeGreen-solo
|
Frame_params: Updated solo params for Copter 4
|
2019-11-08 07:28:17 +08:00 |
CubeOrange
|
HAL_ChibiOS: move heater gains on CubeOrange to hwdef.dat
|
2021-06-01 08:07:49 +10:00 |
CubeOrange-bdshot
|
AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
|
2021-02-03 18:49:06 +11:00 |
CubeOrange-joey
|
Hwdef: add Joey
|
2021-05-27 14:19:55 +10:00 |
CubeOrange-periph
|
AP_HAL_ChibiOS: enable BattMon MPPT PacketDigital to CubeOrange-periph
|
2021-06-09 18:36:18 +10:00 |
CubePurple
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
CubeSolo
|
AP_HAL_ChibiOS: add OREO support to CubeSolo.
|
2021-06-16 20:25:58 +10:00 |
CubeYellow
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
CubeYellow-bdshot
|
AP_HAL_ChibiOS: bdshot configs for CubeYellow and mRoControlZeroH7
|
2021-03-03 18:02:26 +11:00 |
DrotekP3Pro
|
AP_HAL_ChibiOS: DrotekP3Pro serial5 to mavlink2
|
2020-06-30 09:42:49 +10:00 |
Durandal
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
Durandal-bdshot
|
AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
|
2021-02-03 18:49:06 +11:00 |
F4BY
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
F35Lightning
|
HAL_ChibiOS: fixed fast sampling on F32Lightning
|
2020-09-02 06:42:44 +10:00 |
FlywooF745
|
HAL_ChibiOS: allow FlywooF745 to build again
|
2021-08-28 17:10:29 +09:00 |
FlywooF745Nano
|
AP_HAL_ChibiOS: add FlywooF745Nano board definition
|
2021-08-28 17:10:29 +09:00 |
FreeflyRTK
|
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
|
2021-05-19 17:38:47 +10:00 |
G4-ESC
|
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
|
2021-05-19 17:38:47 +10:00 |
HitecMosaic
|
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
|
2021-05-19 17:38:47 +10:00 |
HolybroGPS
|
HAL_ChibiOS: added HolybroGPS AP_Periph port
|
2021-06-01 09:19:51 +10:00 |
KakuteF4
|
AP_HAL_ChibiOS: use hardware serial inversion pins on F4 boards that support it
|
2021-08-28 17:10:29 +09:00 |
KakuteF4Mini
|
AP_HAL_ChibiOS: correct KakuteF4Mini board id
|
2021-05-18 10:02:36 +10:00 |
KakuteF7
|
HAL_ChibiOS: Init kakutef7 motor pins for correct initialization of some ESCs
|
2021-02-03 13:13:32 +11:00 |
KakuteF7-bdshot
|
AP_HAL_ChibiOS: KakuteF7 bdshot configuration, tested by yaapu
|
2021-04-06 11:33:53 +10:00 |
KakuteF7Mini
|
HAL_ChibiOS: save flash on boards that are critically low
|
2021-04-13 09:58:59 +10:00 |
MambaF405v2
|
AP_HAL_ChibiOS: use hardware serial inversion pins on F4 boards that support it
|
2021-08-28 17:10:29 +09:00 |
MatekF405
|
HAL_ChibiOS: reduced flash usage on MatekF405
|
2021-04-21 07:12:55 +10:00 |
MatekF405-CAN
|
AP_HAL_ChibiOS: add f405-MatekGPS & MatekF405-CAN hwdef
|
2021-02-03 18:09:35 +11:00 |
MatekF405-STD
|
HAL_ChibiOS: convert matek boards
|
2019-05-30 15:39:57 +10:00 |
MatekF405-Wing
|
AP_HAL_ChibiOS: add OREO support to CubeSolo.
|
2021-06-16 20:25:58 +10:00 |
MatekF405-bdshot
|
AP_HAL_ChibiOS: re-enable LEDs on MatekF405-bdshot
|
2021-07-23 10:19:47 +09:00 |
MatekF765-SE
|
Tools: added MatekF765-SE to autobuild
|
2021-08-28 17:10:29 +09:00 |
MatekF765-Wing
|
AP_HAL_ChibiOS: add MatekF765-SE hwdef as a variant of MatekF765-Wing
|
2021-08-28 17:10:29 +09:00 |
MatekH743
|
AP_HAL_ChibiOS: add support for dshot commands to rcout
|
2021-05-05 17:41:24 +10:00 |
MatekH743-bdshot
|
Revert "AP_HAL_ChibiOS: support 6 bi-directional dshot channels on the MatekH743"
|
2021-04-22 18:39:06 +10:00 |
MatekH743-periph
|
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
|
2021-05-19 17:38:47 +10:00 |
MazzyStarDrone
|
AP_HAL_ChibiOS:add mazzy star drone hwdef
|
2020-11-17 17:57:07 +11:00 |
NucleoH743
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
OMNIBUSF7V2
|
HAL_ChibiOS: switch OMNIBUSF7V2 timer for RCIN
|
2021-03-23 12:01:20 +11:00 |
OMNIBUSF7V2-bdshot
|
AP_HAL_ChibiOS: add support for bidir DShot support in RCOutput
|
2020-12-30 19:14:16 +11:00 |
OmnibusNanoV6
|
AP_HAL_ChibiOS: add USART3 as alt config on OmnibusNanoV6
|
2020-09-07 15:34:01 +10:00 |
OmnibusNanoV6-bdshot
|
AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
|
2021-02-03 18:49:06 +11:00 |
PH4-mini
|
AP_HAL_ChibiOS: standard spelling of variant
|
2020-12-25 00:01:50 +11:00 |
Pix32v5
|
HAL_ChibiOS: enable heater on Pix32v5
|
2021-06-01 08:07:49 +10:00 |
Pixhawk1
|
HAL_ChibiOS: fixed Pixhawk1 gyro orientation
|
2019-08-27 19:29:37 +10:00 |
Pixhawk1-1M
|
AP_HAL_ChibiOS: avoid referencing flash sector/page 22 on 1MB boards
|
2020-03-03 10:13:53 +11:00 |
Pixhawk1-1M-bdshot
|
AP_HAL_ChibiOS: add support for bidir DShot support in RCOutput
|
2020-12-30 19:14:16 +11:00 |
Pixhawk4
|
AP_HAL_ChibiOS: swap Pixhawk4 blue and red LEDs
|
2021-08-28 17:10:29 +09:00 |
Pixhawk4-bdshot
|
AP_HAL_ChibiOS: add support for bidir DShot support in RCOutput
|
2020-12-30 19:14:16 +11:00 |
Pixracer
|
AP_HAL_ChibiOS: remove fmuv4 and update Pixracer
|
2020-07-13 15:24:54 +10:00 |
Pixracer-bdshot
|
AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
|
2021-02-03 18:49:06 +11:00 |
Pixracer-periph
|
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
|
2021-05-19 17:38:47 +10:00 |
QioTekZealotF427
|
HAL_ChibiOS: fixed GPIO lines for QioTekZealotF427
|
2021-09-10 14:08:46 +09:00 |
R9Pilot
|
AP_HAL_ChibiOS: standard spelling of variant
|
2020-12-25 00:01:50 +11:00 |
STM32CubeConf
|
HAL_ChibiOS: added F732 16MHz CubeMX config
|
2021-05-09 06:44:19 +10:00 |
SuccexF4
|
ChibiOS: Add SWD pins to SuccexF4 bootloader
|
2021-02-03 18:37:46 +11:00 |
TBS-Colibri-F7
|
AP_HAL_ChibiOS: standard spelling of variant
|
2020-12-25 00:01:50 +11:00 |
VRBrain-v51
|
HAL_ChibiOS: reduce flash on VRBranin-v51
|
2021-06-05 13:05:30 +10:00 |
VRBrain-v52
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
VRBrain-v54
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
VRCore-v10
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
VRUBrain-v51
|
HAL_ChibiOS: fixed build of VRUBrain-v51
|
2021-06-21 16:48:10 -07:00 |
ZubaxGNSS
|
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
|
2021-05-19 17:38:47 +10:00 |
airbotf4
|
HAL_ChibiOS: removed EKF2 define, not needed any more
|
2020-05-10 15:09:54 +10:00 |
common
|
HAL_ChibiOS: use more USB buffers on higher end F7 chips
|
2021-09-10 14:08:46 +09:00 |
crazyflie2
|
AP_HAL_ChibiOS: Added support for Bitcraze Crazyflie 2.1
|
2020-06-07 07:49:37 +10:00 |
f103-ADSB
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f103-Airspeed
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f103-GPS
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f103-HWESC
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f103-QiotekPeriph
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f103-RangeFinder
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f103-Trigger
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f103-periph
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f303-GPS
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f303-HWESC
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f303-M10025
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f303-M10070
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f303-MatekGPS
|
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
|
2021-05-19 17:38:47 +10:00 |
f303-Universal
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f303-periph
|
AP_HAL_ChibiOS: rename f103-periph/hwdef.dat to .inc (f303 too)
|
2021-05-20 17:23:17 +10:00 |
f405-MatekGPS
|
AP_HAL_ChibiOS: remove redundant HAL_LOGGING_ENABLED from AP_Periph hwdefs
|
2021-05-19 17:38:47 +10:00 |
fmuv2
|
HAL_ChibiOS: removed EKF2 define, not needed any more
|
2020-05-10 15:09:54 +10:00 |
fmuv3
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
fmuv3-bdshot
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
fmuv5
|
HAL_ChibiOS: switch more boards to 32k FRAM
|
2021-03-21 11:59:12 +11:00 |
fmuv5-bdshot
|
AP_HAL_ChibiOS: add support for bidir DShot support in RCOutput
|
2020-12-30 19:14:16 +11:00 |
iomcu
|
AP_HAL_ChibiOS: move from HAL_NO_LOGGING to HAL_LOGGING_ENABLED
|
2021-05-19 17:38:47 +10:00 |
luminousbee4
|
HAL_ChibiOS: switch from DPS280 to DPS310 in boards that use the DPS310
|
2021-02-09 11:37:07 +11:00 |
luminousbee5
|
HAL_ChibiOS: added support for the new H7 luminousbee version 5
|
2021-04-21 20:41:34 +10:00 |
mRoControlZeroClassic
|
HAL_ChibiOS: switch more boards to 32k FRAM
|
2021-03-21 11:59:12 +11:00 |
mRoControlZeroF7
|
HAL_ChibiOS: switch more boards to 32k FRAM
|
2021-03-21 11:59:12 +11:00 |
mRoControlZeroH7
|
HAL_ChibiOS: enable 32k FRAM on H7 boards
|
2021-01-16 06:47:10 +11:00 |
mRoControlZeroH7-bdshot
|
AP_HAL_ChibiOS: bdshot configs for CubeYellow and mRoControlZeroH7
|
2021-03-03 18:02:26 +11:00 |
mRoControlZeroOEMH7
|
HAL_ChibiOS: switch more boards to 32k FRAM
|
2021-03-21 11:59:12 +11:00 |
mRoNexus
|
HAL_ChibiOS: switch from DPS280 to DPS310 in boards that use the DPS310
|
2021-02-09 11:37:07 +11:00 |
mRoPixracerPro
|
HAL_ChibiOS: switch from DPS280 to DPS310 in boards that use the DPS310
|
2021-02-09 11:37:07 +11:00 |
mRoPixracerPro-bdshot
|
AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
|
2021-02-03 18:49:06 +11:00 |
mRoX21
|
HAL_ChibiOS: changed optimisation of higher end boards to -O2
|
2019-09-28 08:57:26 +10:00 |
mRoX21-777
|
HAL_ChibiOS: removed unnecessary USB product IDs from boards
|
2021-05-27 09:30:30 +09:00 |
mindpx-v2
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
mini-pix
|
HAL_ChibiOS: update power VALID pins
|
2020-06-04 09:51:27 +10:00 |
omnibusf4
|
AP_HAL_ChibiOS: disable AP_Mount on "mini" boards
|
2020-08-04 09:18:14 +10:00 |
omnibusf4pro
|
HAL_ChibiOS: bring us to 18k free for MatekF405-Wing plane build
|
2021-06-09 18:07:00 +10:00 |
omnibusf4pro-bdshot
|
AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
|
2021-02-03 18:49:06 +11:00 |
omnibusf4pro-one
|
AP_HAL_ChibiOS: add omnibusf4pro config with one compass and gps
|
2021-05-19 18:04:20 +10:00 |
omnibusf4v6
|
HAL_ChibiOS: removed EKF2 define, not needed any more
|
2020-05-10 15:09:54 +10:00 |
revo-mini
|
AP_HAL_ChibiOS: use hardware serial inversion pins on F4 boards that support it
|
2021-08-28 17:10:29 +09:00 |
revo-mini-bdshot
|
revo-mini bdshot
|
2021-04-07 17:44:29 +10:00 |
revo-mini-i2c
|
AP_HAL_ChibiOS: use hardware serial inversion pins on F4 boards that support it
|
2021-08-28 17:10:29 +09:00 |
revo-mini-i2c-bdshot
|
revo-mini ext i2c
|
2021-04-07 17:26:56 +10:00 |
scripts
|
HAL_ChibiOS: reduce the impact of UART DMA contention
|
2021-09-10 14:08:46 +09:00 |
skyviper-f412-rev1
|
AP_HAL_ChibiOS: Disable un-needed hardware drivers in SkyViper builds
|
2021-06-09 21:42:51 +10:00 |
skyviper-journey
|
AP_Hal_ChibiOS: Skyviper Parameters PSC_VELXY_FLTE
|
2021-08-14 11:05:38 +09:00 |
skyviper-v2450
|
AP_HAL_ChibiOS: Disable un-needed hardware drivers in SkyViper builds
|
2021-06-09 21:42:51 +10:00 |
sparky2
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
|
2020-04-28 10:32:23 +10:00 |
speedybeef4
|
HAL_ChibiOS: removed EKF2 define, not needed any more
|
2020-05-10 15:09:54 +10:00 |