Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
15,647 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

257 Commits

Author SHA1 Message Date
Randy Mackay c64d444b5a Plane: integrate BattMonitor 2013-10-03 11:16:08 +09:00
Mike McCauley 3ddcdba659 Plane: Parameters BATTERY_MONITORING for Flymaple 2013-09-24 13:51:28 +10:00
Andrew Tridgell 328e900364 Plane: changed TKOFF_THR_DELAY default to 2 
this makes it safer for hand launch with pusher props
 2013-09-19 21:42:21 +10:00
Andrew Tridgell 43ffe91546 Plane: added FS_ACTION of 2 for glide 
this allows people without specified settings in their receiver for
failsafe to choose FBWA zero throttle glide on throttle failsafe. That
can be a better choice when flying at a R/C club field
 2013-09-15 15:05:39 +10:00
Andrew Tridgell dd6a69f588 Plane: added WP_MAX_RADIUS parameter 
useful when using AUTO_FBW_STEER for manual steering in competitions
 2013-09-13 17:43:08 +10:00
Andrew Tridgell cc6acac1dd Plane: added AUTO_FBW_STEER option 
this is an unusual option that gives FBWA flight control in AUTO
mode. It is being added to support use of APM in an aerial robotics
competition where students need to pilot the plane, but they still
need waypoint triggering of payloads
 2013-09-13 14:38:09 +10:00
Andrew Tridgell 8010d7fd78 Plane: update battery pin docs 2013-09-12 13:43:22 +10:00
Andrew Tridgell 0c8d56632e Plane: fixed SR0 and SR3 autodocs 2013-09-12 09:53:24 +10:00
Andrew Tridgell f6688582a6 Plane: added FENCE_ACTION=3 behaviour 
this makes it safer to enable the geofence as a receiver failsafe
mode. It retains manual throttle control, so if it triggers on the
ground due to the receiver losing signal from the transmitter then the
throttle can be kept low, preventing an unexpected takeoff.
 2013-09-08 07:31:10 +10:00
Craig3DRobotics 630095adaa Revert "Copter: Corrected SR0 & SR3 parameter descriptions" 
This reverts commit 6568234018.
 2013-09-06 09:58:19 -07:00
Craig3DRobotics 2b726abe0e Plane: Correction on SR0 & SR3 parameter description. 2013-09-05 22:29:10 -07:00
Andrew Tridgell accfd46633 Plane: update for new APM_Control API 2013-08-14 14:57:41 +10:00
Andrew Tridgell 233b033e8c Plane: removed old speed/altitude control algorithms 
Use TECS only. This makes the code a lot simpler and easier to
properly document
 2013-07-22 13:28:11 +10:00
Andrew Tridgell b8fa83ff54 Plane: change default slewrate to 100%/second 2013-07-22 12:50:02 +10:00
Andrew Tridgell 6e288551ab Plane: fixed reversion to pre-failsafe mode 
if AUTO was entered using GCS, we need to switch back to the old mode,
not control channel
 2013-07-22 12:50:02 +10:00
Andrew Tridgell 74dabad1f3 Plane: added SKIP_GYRO_CAL parameter 
useful for starting the sim at high altitudes, and for starting planes
without having to hold them still
 2013-07-22 12:50:01 +10:00
Andrew Tridgell 9bbe6c1967 Plane: update to new license boilerplate for GPLv3 
we had LGPLv2 in some places, despite the fw being GPLv3
 2013-07-22 12:50:01 +10:00
Andrew Tridgell 53b1b9b575 Plane: added note on type of airspeed in docs 2013-07-22 12:50:01 +10:00
Andrew Tridgell 608345415b Plane: pass aircraft parameters to attitude controllers 
also cope with rename of airspeed min/max variables

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-07-18 14:53:37 +10:00
Andrew Tridgell dbd47b2a30 Plane: make TECS the default speed/height controller 2013-07-15 11:12:24 +10:00
Andrew Tridgell e80d73df93 Plane: expand docs for TRIM_AUTO 2013-07-14 21:23:15 +10:00
Andrew Tridgell 113bc20f8a Plane: added a new CRUISE flight mode 
See
http://diydrones.com/group/apmusergroup/forum/topics/feature-request-hold-heading-mode

this fixes issue #438
 2013-07-13 21:45:58 +10:00
Andrew Tridgell f300df5fd1 Plane: added FS_LONG_TIMEOUT and FS_SHORT_TIMEOUT parameters 
this is to address the issue raised here:

http://diydrones.com/forum/topics/ardupilot-circle-mode
 2013-07-12 11:56:04 +10:00
Andrew Tridgell 11a4628409 Plane: added ACRO mode to mode choices 2013-07-11 09:10:41 +10:00
Andrew Tridgell fc67f51901 Plane: added ACRO_ROLL_RATE and ACRO_PITCH_RATE parameters 
default to 180 degrees/second, which seems reasonable
 2013-07-11 09:10:41 +10:00
Andrew Tridgell 2005d5642a Plane: fixed a documentation string 
GND_ALT_OFFSET is now for barometric corrections
 2013-07-10 14:46:22 +10:00
Andrew Tridgell 84299c3747 Plane: document ALT_CTRL_ALG=2 2013-07-04 17:00:04 +10:00
Andrew Tridgell a5bda3ffef Plane: changed to using a "aircraft parameters" structure 
this structure can be passed to libraries to give them easy access to
critical user parameters
 2013-07-04 16:56:57 +10:00
Paul Riseborough d62636d309 Plane: added new TECS altitude controller 
Includes improvements to takeoff/launch detect logic to support hand
launching for X-8 flight
 2013-07-04 16:56:57 +10:00
Andrew Tridgell f3237b9e5d Plane: update FS_LONG_ACTN and FS_SHORT_ACTN docs 
thanks to Craig for noticing this
 2013-07-02 14:50:04 +10:00
Andrew Tridgell 45f5d05bd2 Plane: enabled RELAY_* parameters 2013-06-25 12:44:26 +10:00
Andrew Tridgell 056e0ca40d Plane: APM2 doesn't have channel 9 PWM output 2013-06-24 13:06:54 +10:00
Paul Riseborough 2204b30e66 Plane: Added APM_Control integrator limits to table used to covert old PID values 2013-06-22 21:59:47 +10:00
Randy Mackay 6ea568d72a Plane: param description change for RC5 ~ RC11 
Reversing the order may avoid duplication of param descriptions in the
auto generated parameter web page
 2013-06-21 09:58:02 +09:00
Randy Mackay 75bcd7cdab Plane: update THR_FS_VALUE parameter description 2013-06-18 15:57:29 +09:00
Andrew Tridgell b0c87b8a61 Plane: fix VOLT_DIVIDER docs 2013-06-07 08:40:28 +10:00
Andrew Tridgell 93cd0f9a31 Plane: switch to new AP_Scheduler 
this gives us more accurate task scheduling in ArduPlane, plus better
monitoring of task timing (via SCHED_DEBUG)
 2013-06-04 13:34:58 +10:00
Andrew Tridgell 27bc0cdc2c Plane: rename old channel_* globals 
prevent the old "g." names from being used
 2013-06-03 16:37:51 +10:00
Andrew Tridgell fb9bf21522 Plane: allow channel mapping of first 4 channels 
this makes it easier to support DSM and SBUS radios
 2013-06-03 16:23:48 +10:00
Andrew Tridgell cd55ed45e2 Plane: removed the old roll/pitch/yaw PID controllers 
use the new controllers, with auto parameter conversion
 2013-05-31 14:06:56 +10:00
Andrew Tridgell cae1079747 Plane: auto-convert the old RLL2SRV* parameters to the new CTL_RLL_* parameters 2013-05-31 07:58:29 +10:00
Andrew Tridgell e48b8c7b4a Plane: improve RTL altitude docs 2013-05-31 07:58:29 +10:00
Andrew Tridgell 6e0f1f56de Plane: update docs on volt/current pin 2013-05-31 07:57:15 +10:00
Andrew Tridgell fa9eb84542 Plane: added more parameter docs (flaps and GCS control) 2013-05-30 09:44:09 +10:00
Andrew Tridgell de904468b2 Plane: added BATT_MONITOR and VOLT_DIVIDER docs 2013-05-30 09:06:36 +10:00
Andrew Tridgell f9a1b4f0e3 Plane: improve ALT_MIX docs 2013-05-28 10:10:22 +10:00
Andrew Tridgell c481ac8745 Plane: use a default mixing gain of 0.5 
this ensures compatibility with existing configs
 2013-05-25 19:15:47 +10:00
Andrew Tridgell c81421e275 Plane: added MIXING_GAIN parameter 
this allows for the full range of output on both channels, but can
saturate
 2013-05-25 18:28:13 +10:00
Andrew Tridgell dd633fcf3f Plane: make voltage and battery capacity failsafe settable at runtime 
this also fixes issue #292
 2013-05-22 20:33:57 +10:00
Randy Mackay 4c08e32bf6 Plane: param update for AP_Baro 2013-05-21 14:22:23 +09:00
Randy Mackay 84909ee56a Plane: add parameter description for LOG_BITMASK 2013-05-21 11:22:11 +09:00
Andrew Tridgell 9c6f80c42b Plane: moved some default values to Parameters.pde 2013-05-05 21:51:09 +10:00
Andrew Tridgell e87a6d5564 Plane: added links to new APM controller docs 2013-05-05 21:51:09 +10:00
Andrew Tridgell 4e2b88f6e6 Plane: added ATT_CONTROLLER option to select attitude controller 
set to 1 for the new APM_Control library
 2013-05-05 21:51:09 +10:00
Paul Riseborough 663951d9a7 Plane: rename APM_Control parameters 
this groups the parameters more logically
 2013-05-05 21:51:08 +10:00
Andrew Tridgell 0d97f417ec Plane: enable compass on all boards by default 
if not present, then mag init will fail and it will disable
 2013-05-02 15:01:33 +10:00
Andrew Tridgell de3fcbc413 Plane: removed the MANUAL_LEVEL option 
levelling on every startup is far too error prone. This was just
another parameter that everyone changed.
 2013-04-29 14:19:53 +10:00
Andrew Tridgell 3d7a4d0e6e Plane: added ELEVON_OUTPUT option 
this is like the vtail mixer, but for elevons
 2013-04-29 12:13:59 +10:00
Andrew Tridgell 0b8c2da4df Plane: support 12 output channels on PX4 2013-04-25 20:10:53 +10:00
Andrew Tridgell 994d8e354a Plane: allow for negative WP_LOITER_RAD for conter-clockwise loiter 
this follows the same convention as missions
 2013-04-15 10:52:32 +10:00
Andrew Tridgell 78538d0543 Plane: removed old HDNG2RLL PID control 
not used with L1
 2013-04-15 10:52:32 +10:00
priseborough 70a186464b Plane: added LEVEL_ROLL_LIMIT parameter 
this replaces both TKOFF_HEAD_HOLD and RUDDER_STEER, allowing users to
instead select a roll limit for takeoff and landing
 2013-04-12 21:59:52 +10:00
Andrew Tridgell 11eb0cfce1 Plane: update for new AP_Navigation controller class 
this switches ArduPlane over to use the L1 navigation controller, via
a generic nav_controller object pointer.

Note that the nav_controller controls all types of navigation now,
including level flight and heading hold. This provides a cleaner
abstraction than the old method of special case navigation handling

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-04-12 12:48:09 +10:00
Andrew Tridgell 71f6287388 Plane: fixed spelling 2013-04-06 17:42:20 +11:00
Andrew Tridgell 993154ea59 Plane: expand the VTAIL_OUTPUT docs for APM1 2013-04-05 16:38:46 +11:00
Andrew Tridgell 406921faf1 Plane: added VTAIL_OUTPUT option 
this allows for software vtail mixing
 2013-04-05 15:22:11 +11:00
Andrew Tridgell 2506c216dd Plane: added a second type of stick mixing 
this changes STICK_MIXING from a boolean to a tri-state. With
STICK_MIXING=1 it now uses FBW style mixing. With STICK_MIXING=2 it
uses the old style of direct stick mixing.
 2013-04-02 08:52:56 +11:00
Andrew Tridgell 624ebced38 Plane: document INVERTEDFLT_CH 2013-04-01 22:17:04 +11:00
Andrew Tridgell dfb14d760b Plane: added HIL_SERVOS option 
this allows for real servo output in HIL
 2013-03-30 14:38:43 +11:00
Andrew Tridgell 7db7d7db77 Plane: change FBWB altitude control algorithm 
this makes FBWB much less sensitive to airframe tuning. When the
elevator stick first goes neutral it locks in the current altitude as
the target altitude. When the elevator stick is off neutral, it moves
the target altitude in proportion to the elevator, at a rate goverened
by the new FBWB_CLIMB_RATE parameter

This prevents the aircraft from slowly drifting in altitude in FBWB,
and gives a more intuitive control mechanism for altitude.

Thanks to Chris Miser from Falcon UAV for help in designing this
change
 2013-03-28 10:27:25 +11:00
Andrew Tridgell f077f54e6a Plane: added TKOFF_HEAD_HOLD option 
this allows control over whether ArduPlane tries to hold heading
during auto takeoff. For hand launches it can be better to hold the
wings level and not attempt to hold heading during takeoff to prevent
the possibility of a stall during the climb out.

Thanks to Chris Miser from Falcon UAV for the feedback that led to
this option.
 2013-03-27 10:27:14 +11:00
Andrew Tridgell 0a385cc0ff Plane: added TKOFF_THR_MINACC option 
this is used for triggering auto takeoff with a hand launched plane
 2013-03-09 14:41:04 +11:00
Michael Warren 9697ff5d6d Plane: Added extra parameter to specify at what speed in auto-takeoff throttle should engage 
This adds TKOFF_THR_MINSPD in m/s
 2013-03-09 14:19:48 +11:00
Andrew Tridgell e0e22b63a7 Plane: removed INPUT_VOLTS parameter 
no longer needed
 2013-03-08 10:01:33 +11:00
Andrew Tridgell 5f4c5f8201 Plane: update SERIAL0_BAUD parameter description 2013-02-22 08:39:02 +11:00
Andrew Tridgell 86f667f6cc Plane: added new SERIAL0_BAUD parameter 
this is useful on PX4
 2013-01-13 07:39:40 +11:00
Andrew Tridgell b6295c12e1 Plane: fixes for new AP_Relay interface 2013-01-02 10:18:45 +11:00
Andrew Tridgell 85e4f67e68 Plane: added a note about the dangers of the FS_GCS_ENABL option 2012-12-25 21:18:39 +11:00
Andrew Tridgell feca411943 Plane: added new TRAINING mode 
this mode gives manual control when the roll or pitch is within the
set limits (the same limits as FBW mode), and prevents the pilot from
flying beyond those limits, essentially a "attitude limited manual"
mode
 2012-12-20 22:41:58 +11:00
Andrew Tridgell 678947c65d Plane: more fixes for SITL and new AP_Param startup 2012-12-20 14:52:29 +11:00
Pat Hickey f8dec9ae4a ArduPlane: fixes to use CONFIG_HAL_BOARD instead of CONFIG_APM_HARDWARE 2012-12-20 14:51:37 +11:00
Andrew Tridgell 898aa0b260 Plane: fixed spelling error 2012-12-04 11:38:29 +11:00
Andrew Tridgell 24e1af1c82 Plane: fixed sensors and attitude HIL 
we now use the Stub version of the InertialSensor driver. In sensors
HIL we can now correctly drive the AHRS code.
 2012-12-03 23:26:39 +11:00
Andrew Tridgell 845dd88091 Plane: make THR_SLEWRATE docs clearer 2012-11-28 11:41:39 +11:00
Andrew Tridgell 92cd631ce5 Plane: added THR_PASS_STAB parameter 
this allows direct passthru of throttle in STABILIZE and FBWA, which
is useful for nitro planes wher you have a throttle cut switch that
drops the throttle below normal minimum.
 2012-11-26 23:33:05 +11:00
Andrew Tridgell 84300c85d6 APM: make it possible to run the CLI on any serial port 2012-11-21 21:41:34 +11:00
Andrew Tridgell 8f108e2eb3 APM: added AMP_OFFSET option 
thanks to Alexey Kozin!
 2012-11-21 13:34:27 +11:00
rmackay9 ef727bbb3c ArduPlane: move to use new INS library instead of IMU library 2012-11-07 19:21:03 +09:00
Andrew Tridgell 8652bfee8d APM: added RSSI_PIN option for receiver RSSI 
this allows you to configure the pin for receiver RSSI without
recompiling
 2012-11-06 22:04:41 +11:00
Andrew Tridgell e479af67ff APM: fixed loiter radius docs to reflect new limit 2012-10-30 16:19:24 +11:00
rmackay9 775489d658 ArduPlane: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery monitor 2012-10-13 20:51:41 +09:00
Andrew Tridgell 6bae5ecd51 APM: added THR_SUPP_MAN option 
this allows for manual throttle control during auto throttle
suppression. This is useful for keeping a petrol engine idling before
takeoff
 2012-09-22 20:17:06 +10:00
Andrew Tridgell cebb67e1df APM: removed the unused sonar code 
when we start supporting a sonar we'll add a AP_Sonar library, like
AP_Airspeed
 2012-09-19 19:35:22 +10:00
Andrew Tridgell 2324997e16 APM: added ALT_OFFSET parameter 
useful to adjust for barometric pressure changes during a long flight
 2012-09-19 16:23:25 +10:00
Andrew Tridgell 5c3595e0dc APM: fixed throttle nudging 
The nudge value depended on RC3_TRIM, which is not a reliable
value. It tried to only take effect when the throttle stick was above
50%, but if RC3_TRIM was high for some reason (say 1500) then it would
actually depress the throttle by a large amount, which could cause the
plane to stall.

This also adds a boolean option THROTTLE_NUDGE to allow disabling of
throttle nudging
 2012-09-09 19:39:04 +10:00
Andrew Tridgell 164c60d25f APM: added RUDDER_STEER option 
when enabled, this uses only the rudder to steer during takeoff and
landing, using aileron only for levelling
 2012-09-08 10:07:03 +10:00
Andrew Tridgell 96ea350143 APM: added XTRK_MIN_DIST option 
this allows you to disable crosstrack correction on short legs
 2012-09-08 10:06:44 +10:00
Andrew Tridgell 9a987ce116 APM: fixed docs for LIM_PITCH_MIN 2012-08-30 14:55:08 +10:00
Andrew Tridgell f6c3197cd2 APM: added new TELEM_DELAY parameter 
number of seconds to delay telemetry
 2012-08-30 08:59:39 +10:00
Andrew Tridgell fce01464b1 APM: added ALT_CTRL_ALG parameter 
this allows you to select different altitude control algorithms. The
current choices are for the default (automatic based on if airspeed is
available), or to force a non-airspeed algorithm

The idea is to make it possible to use airspeed for some things (like
wind speed, speed scaling) but not for alt control
 2012-08-28 20:18:24 +10:00
Andrew Tridgell c9cf483822 APM: added XTRK_USE_WIND parameter 
when enabled this will use the wind estimation code to adjust the
navigation bearing, allowing the navigation code to cope with much
higher levels of wind while using a compass
 2012-08-25 17:49:26 +10:00
Andrew Tridgell d445482ace APM: added optional use of new APM_Control library 
thanks to Jon Challinger for the new controllers!
 2012-08-22 12:45:14 +10:00
uncrustify 0f415bbc6a uncrustify ArduPlane/Parameters.pde 2012-08-21 19:19:50 -07:00
Andrew Tridgell bf2319a0fc AHRS: fixed reference to AHRS var_info for APM and ACM 2012-08-21 15:58:32 +10:00
rmackay9 6d489947cf ArduPlane: replaced many "int" with "int16_t", "long" with "int32_t" 2012-08-18 18:26:13 +09:00
Andrew Tridgell 5e690d5680 APM: added parameter FBWB_ELEV_REV 
this fixes issue 343
 2012-08-17 15:04:53 +10:00
Andrew Tridgell ad73c229ab APM: added LAND_FLARE_ALT and LAND_FLARE_SEC 
these allow you to configure the altitude and time before touchdown to
flare the plane and lock the heading. Useful on larger planes.
 2012-08-15 18:11:16 +10:00
Andrew Tridgell 1252ddfe0c APM: rename RDRSTEER to WHEELSTEER 
thanks to Jon for the suggestion
 2012-08-15 16:28:59 +10:00
Andrew Tridgell e26e8b3b67 APM: added RDRSTEER_ PID for steering on ground 
this allows for rolling takeoff with steering, and use of rudder in
landing
 2012-08-15 12:39:35 +10:00
Andrew Tridgell 817017658d APM: implement FENCE_ACTION_REPORT 
when FENCE_ACTION is set to FENCE_ACTION_REPORT a fence breach is
reported, but the flight mode is not changed
 2012-08-15 12:39:35 +10:00
Andrew Tridgell 2865434d02 APM: added 'OBC' failsafe module for ArduPlane 
this adds FS_* parameters for setting up APM to follow the outback
challenge failsafe rules.

This includes:

 - manual pin
 - heartbeat pin
 - waypoint for heartbeat failure
 - waypoint for GPS failure
 2012-08-15 12:39:34 +10:00
Andrew Tridgell 3bdc7d41be INS: disable INS AP_Param table when not on APM1 hardware 
this could cause overwriting of memory with default values
 2012-08-11 22:06:03 +10:00
Andrew Tridgell 5498d347f3 APM: Added RST_MISSION_CH option 
this allows a pilot to reset the mission using a transmitter
switch. Very useful for repeating a mission during testing
 2012-08-09 10:33:16 +10:00
Andrew Tridgell e133900c68 APM: Added STICK_MIXING option 
this replaces the compile time option. Disabling during long distance
flights when the transmitter may be out of range is useful.
 2012-08-09 08:53:29 +10:00
Amilcar Lucas d34549f386 Add an optional second mount to ArduPlane and ArduCopter 2012-08-08 23:22:24 +02:00
Andrew Tridgell 5bfd1200d6 APM: change variables to use _cm, _cd and _ms suffix for units 
this makes it less likely that we mix up units
 2012-08-08 12:12:30 +10:00
Andrew Tridgell a823c9ceae APM: removed cli slider and dipswitch options 
use mavlink/eeprom for all config
 2012-08-08 12:12:29 +10:00
Andrew Tridgell 12cd6b68ff AP_Param: update ArduPlane core for new AP_Param interface 2012-08-08 12:11:57 +10:00
rmackay9 176e6fdd68 ArduPlane: bug fix to global var_info parameter list for ahrs object. 2012-08-01 10:52:34 +09:00
Andrew Tridgell cb61c3be96 APM: fixed case of 'LAND_PITCH_CD' 
mavlink parameters are uppercase by convention
 2012-07-29 17:07:38 +10:00
rmackay9 06e35820e5 ArduPlane: allow MPU6000's DMP to be used for attitude estimation. 
Enable by adding this line to APM_Config.h:
#define DMP_ENABLED ENABLED
 2012-07-28 19:50:40 +09:00
rmackay9 842ce47219 ArduPlane: change to Parameters.pde to support moving var_info from AP_AHRS to AP_AHRS_DCM 2012-07-28 14:31:01 +09:00
Andrew Tridgell 6bcfe913f7 APM: added a SCALING_SPEED parameter 
this allows users to adjust the base speed used for scaling roll/pitch
PIDs. This can be used to make PIDs work for both airspeed and
non-airspeed control
 2012-07-26 11:30:23 +10:00
Andrew Tridgell 3c2fc72654 APM: fixed HIL build 2012-07-26 10:09:07 +10:00
Jason Short 98237a0e00 Added Oilpan INS group object param 2012-07-18 23:07:50 -07:00
Jeff Taylor d02655ac56 APM: Fixed bug where landing_pitch wasnt initialized properly 
this adds a new LAND_PITCH_CD parameter to control the landing pitch
when an airspeed sensor is not being used
 2012-07-19 13:59:30 +10:00
Andrew Tridgell d6e370886f APM: rename airspeed_cruise to airspeed_cruise_cm to make the units clearer 
it is in cm/s, not m/s
 2012-07-19 11:50:41 +10:00
Amilcar Lucas 3d385c0fb4 ArduPlane parameters: re-order the files, looks like the second file gets ignored :( 2012-07-18 22:52:17 +02:00
Amilcar Lucas 8a8e11fa7f ArduPlane parameters: Add base class info as well 2012-07-18 22:39:49 +02:00
Amilcar Lucas 610fdeacc1 Support up to 11 servos in APM2 
Conflicts:

	ArduPlane/ArduPlane.pde
 2012-07-18 22:01:19 +02:00
Michael Oborne 636fcadde4 fix rc libray param gen 2012-07-18 07:03:39 +08:00
Andrew Tridgell de3c9ce56d Airspeed: change APM to use new AP_Airspeed library 
the next step is AHRS dead reckoning
 2012-07-16 11:21:50 +10:00
Michael Oborne 67ecaa9252 AP fix duplicate keys in param config 2012-07-13 07:06:01 +08:00
Amilcar Lucas dfe0983e1e Merge the changes from APM_Camera branch into ArduCopter 
Conflicts:

	ArduCopter/Camera.pde
	ArduCopter/Parameters.pde
 2012-07-11 00:39:13 +02:00
Andreas M. Antonopoulos de64c05f8e param_parser: cosmetic 
Arduplane: doc fixes
 2012-07-08 21:45:26 -07:00
Andrew Tridgell 78c51b945f APM: fixed DisplayName/Description mixups in parameter docs 2012-07-07 17:40:43 +10:00
Andrew Tridgell 5abd26a142 APM: more parameter documentation 2012-07-05 15:06:45 +10:00
Andrew Tridgell 95d9569b35 Docs: fixed some units in APM parameter docs 2012-07-05 13:00:46 +10:00
Andrew Tridgell 99b11e4f19 Mount: enable mount control via eeprom parameters 
this enables MNT_* parameter control of the camera mount code. It also
fixes the conversion of calculated angles between degrees and
integers, and fixes stabilised mount control when yaw control is not
available.
 2012-07-03 10:21:01 +10:00
Michael Oborne b2d73d8f68 fixup sitl attribute group for planner. - causing invalid advanced/standard views 2012-07-01 21:43:32 +08:00
Andrew Tridgell 55092c25a6 SITL: enable the SIM_* parameters in ArduCopter and ArduPlane 2012-06-29 15:10:52 +10:00
Andrew Tridgell 5bccfbd94c Barometer: fixed airstart for APM 
we need to re-load the ground pressure and temperature from eeprom on
and airstart
 2012-06-27 16:01:50 +10:00
Amilcar Lucas b072a59843 Improve parameters descriptive text 2012-06-21 00:20:37 +02:00
Amilcar Lucas 1906e06b69 Added camera trigger functionality 2012-06-13 21:00:20 +02:00
Amilcar Lucas a32b7c200b Add "3 axis camera stabilization" and "point camera to 3D point" functionality 
Patch by Gregory Fletcher and reviewed by me
 2012-06-13 20:55:19 +02:00
Amilcar Lucas 5ffd489d87 Spellcheck 2012-06-13 20:44:35 +02:00
Michael Oborne c307b69515 increase resolution on params 0.1 > 0.01 2012-05-24 06:22:57 +08:00
Andrew Tridgell b3aa704c49 AirSpeed: added parameter ARSPD_USE 
setting ARSPD_ENABLE to 1 and ARSPD_USE to 0 allows the airspeed
sensor to be initialised and logged without it being used for flight
control. This is very useful when initially testing an airspeed sensor
in a new plane. It also makes it possible to enable/disable the use of
the airspeed sensor during a flight at any time.
 2012-05-22 20:02:23 +10:00
Michael Oborne 218e70cd8b AP - fix attitude level hil mavlink 1.0 issue 2012-05-06 11:05:35 +08:00
Michael Oborne 75f091cd9c more arduplane param info 2012-04-30 20:39:41 +08:00