Andy Piper
3428cbf993
AP_HAL: add dshot command codes for beeps, leds and motor control
...
allow more than one type of ESC for dshot commands
add support for checks around active ESCs
allow dshot alarm to be disabled
allow prioritized dshot commands
2021-05-05 17:41:24 +10:00
Jacob Walser
f7da853adb
AP_HAL: update hardware definitions for navigator r3
2021-04-07 15:08:18 -04:00
Jacob Walser
421638453f
AP_HAL: update Notify LED hardware for navigator r3
2021-04-07 15:08:18 -04:00
Andy Piper
f29dba2ddd
AP_HAL: add set_dshot_rate()
2021-04-06 10:24:04 +10:00
Andrew Tridgell
ebc1f9acf6
AP_HAL: removed assert calls
...
these waste flash space and do not do us any good
2021-03-25 14:03:40 +11:00
Andrew Tridgell
7010eae9e8
AP_HAL: remember details of register check fails
...
this allows for logging of register resets
2021-02-24 18:18:37 +11:00
Andy Piper
a07b238c7d
AP_HAL: add PRIORITY_RCOUT
...
don't allow UART copies
add @SYS/uarts.txt
2021-02-20 14:37:11 +11:00
Patrick José Pereira
12cd138030
AP_HAL: Remove pointer check before delete
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-04 09:01:19 +11:00
Andy Piper
0eff201016
AP_HAL: add mem_info()
...
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
2021-02-03 23:35:44 +11:00
Patrick José Pereira
6899c0b5af
AP_HAL: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Arsh
18f56fbac5
AP_HAL:examples:Printf: Improvements in the Printf example
2021-02-03 13:02:49 +11:00
Andrew Tridgell
6163659887
AP_HAL: prevent a single bad transfer causing an IMU to be marked unhealthy
...
This is a response to this issue:
https://discuss.ardupilot.org/t/gyro-problem-after-waypoint-log-analisys
The 2nd gyro went bad with a large offset. Then the first gyro was
marked unhealthy, forcing the EKF to switch to the 2nd gyro. That
resulted in a crash.
I think the SPI bus was getting bad transfers and the register check
code happened to get a bad transfer, thereby marking the first gyro
unhealthy
This change ensures we only fail the register check if two transfers
in a row are bad. This makes it much less likely that a noisy bus will
lead to an unhealthy gyro
2021-01-27 09:47:55 +11:00
Andrew Tridgell
1680e6e7d6
AP_HAL: expose load_persistent_params() in hal.util
2021-01-21 13:09:21 +11:00
Andrew Tridgell
a9f8c9517c
AP_HAL: added vnav linux target
2021-01-20 10:06:45 +11:00
Andrew Tridgell
6ca68bfba3
AP_HAL: enable 32k storage on SITL
2021-01-16 06:47:10 +11:00
Andrew Tridgell
75c789fc57
AP_Baro: added ExternalAHRS backend
2021-01-05 21:13:12 +11:00
Arsh
3d5addeee0
AP_HAL:examples:AnalogIn: Added comments in the AnalogIn example
2021-01-05 20:43:04 +11:00
Andrew Tridgell
96cbde0ee6
AP_HAL: use ExpandingString class
2021-01-05 10:52:00 +11:00
Tom Pittenger
afaca30075
AP_HAL: add helpers le24toh_ptr(), be24toh_ptr(), put_le24_ptr(), put_be24_ptr()
2020-12-30 17:56:38 -08:00
Andy Piper
1c79f22ba2
AP_HAL: make erpm accessible from RCOutput
...
give access to erpm error rate
add bi-directional dshot mask modifier
2020-12-30 19:14:16 +11:00
Andy Piper
9e7c60178d
AP_HAL: rename system_initialized() and add is_system_initialized()
2020-12-30 18:16:59 +11:00
Andy Piper
c8e464ebea
AP_HAL: add HAL_ENABLE_THREAD_STATISTICS to boards
2020-12-30 18:15:05 +11:00
Ari Krupnik
cfb1213f43
AP_HAL: standard spelling of variant
2020-12-25 00:01:50 +11:00
Andrew Tridgell
19723e6e75
AP_HAL: make uart pointers private
...
this ensures they cannot be used by library or vehicle code, so we
will be able to remove them in future
2020-12-15 10:32:46 +11:00
Andrew Tridgell
195ec0316a
AP_HAL: fixed example fw for SERIAL naming
2020-12-15 10:32:46 +11:00
Andrew Tridgell
95c0852b13
AP_HAL: convert to using hal.serial() instead of hal.uartX
2020-12-15 10:32:46 +11:00
Andrew Tridgell
8678759da4
AP_HAL: added hal.serial() access to uarts
...
this gives access to serial ports in the SERIALn_ order. It is inlined
by the compiler so using hal.uartB and hal.serial(3) generates
idential code on stm32 (tested on H7).
This is a step towards eliminating hal.uartX completely and the
horrible uartB ordering
2020-12-15 10:32:46 +11:00
Tom Pittenger
6630645915
AP_HAL: ap_periph should disable HAL_SUPPORT_RCOUT_SERIAL by default
2020-12-09 07:53:09 -08:00
Andy Piper
d2e01005ee
AP_HAL: add support for @SYS/dma.txt for DMA contention
2020-12-02 18:17:23 +11:00
Andrew Tridgell
68fdf033ee
AP_HAL: support uartI, allowing a total of 9 uarts
...
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
2020-11-30 14:09:31 +11:00
Tom Pittenger
089f3aa349
AP_HAL: allow hwdef to define HAL_SUPPORT_RCOUT_SERIAL - must be disabled for AP_Periph
2020-11-25 14:20:53 +11:00
Andrew Tridgell
5e8380ff41
AP_HAL: allow replay on ChibiOS
2020-11-10 16:15:45 +11:00
Andrew Tridgell
2596875ceb
AP_HAL: removed fs_init()
...
this must go via AP_Filesystem
2020-10-27 10:45:03 +11:00
Peter Barker
3cce6197a1
AP_HAL: delete copy constructors
2020-10-13 19:55:34 +11:00
Pierre Kancir
1c80b04544
AP_HAL: add virtual set_cmdline_parameters()
2020-10-13 10:31:21 +11:00
Peter Barker
9bde294112
AP_HAL: add chargen UARTDriver example
2020-10-09 19:14:59 +11:00
bugobliterator
d1eb9e8aea
AP_HAL: add FilteredCAN mode to tell driver to init as such
2020-10-08 09:31:35 +11:00
mhefny
1200d0e2f8
AP_HAL: add PROBE_IMU_I2C2 to linux.h
2020-10-06 09:27:26 -07:00
Andrew Tridgell
c62b86e3c1
AP_HAL: added timer_tick() on GPIO
2020-10-02 09:38:24 +10:00
Siddharth Purohit
22ab426cf2
AP_HAL: make bools to use single bit in CANTxItem
2020-09-24 12:32:19 +10:00
Siddharth Purohit
0ca2f56b71
AP_HAL: add support for external buffer to be used in ByteBuffer
2020-09-24 12:32:19 +10:00
Siddharth Purohit
9aa0970eed
AP_HAL: disable protocol drivers for bootloader builds
2020-09-24 12:32:19 +10:00
Siddharth Purohit
c7d69e4d13
AP_HAL: disable CAN Protocol Drivers for AP_Periph
2020-09-24 12:32:19 +10:00
Andy Piper
ad895c2654
AP_HAL: ringbuffer get_size cannot be const because of semaphore
2020-09-22 09:37:02 +10:00
Andrew Tridgell
4b1552eebe
AP_HAL: added BUS_TYPE_MSP
...
for MSP sensors
2020-09-09 06:35:50 +10:00
Peter Barker
55f72c1534
AP_HAL: create and use new AP_HAL::PWMSource object
2020-09-08 16:10:50 +10:00
Michael du Breuil
d905282c1e
AP_HAL: Don't redefine allowing double math in SITL/Linux if already defined
2020-09-03 09:56:29 +10:00
Patrick José Pereira
11c19a2dde
AP_HAL: RCOutput_Tap_Linux: Include arm/ioctls.h
...
Add missing include for TCGETS2 while compile with MUSL
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2020-08-25 07:15:00 -07:00
Siddharth Purohit
15abca8ba4
AP_HAL: add native clock info methods used inside other than main thread
2020-08-19 17:31:09 +10:00
Siddharth Purohit
aa893b3983
AP_HAL: add available method for locked state
2020-08-19 17:31:09 +10:00