Andrew Tridgell
bbd32844d1
HAL_ChibiOS: switch more boards to 32k FRAM
...
this enables the parameter backup/restore on those boards, as well as
more waypoints
This is in response to a report that CUAVv5 boards can suffer from the
parameter reset issue
2021-03-21 11:59:12 +11:00
Andrew Tridgell
42bc9adfb7
HAL_ChibiOS: use ExpandingString for @SYS buffers
2021-01-05 10:52:00 +11:00
Ari Krupnik
79e1f5e8bd
AP_HAL_ChibiOS: standard spelling of variant
2020-12-25 00:01:50 +11:00
Andrew Tridgell
d283dd7d00
HAL_ChibiOS: define polarity of 3.3/5v selection for PWM
2020-07-21 08:47:27 +10:00
Andrew Tridgell
571fbf8f71
HAL_ChibiOS: update power VALID pins
2020-06-04 09:51:27 +10:00
Peter Barker
967f8bf726
AP_HAL_ChibiOS: correct description of where stdout goes
2020-05-05 07:57:57 +10:00
Andrew Tridgell
a5965d5a9e
HAL_Chibios: removed unnecessary debug defines
2020-04-29 07:36:55 +10:00
Andrew Tridgell
32cdfddf12
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
...
much easier to understand
2020-04-28 10:32:23 +10:00
Andrew Tridgell
a9df9fe0c0
HAL_ChibiOS: removed clock tree settings in most hwdef.dat
...
these are better set automatically in the headers. This simplifies the
task of doing a new port
2020-04-28 10:32:23 +10:00
Andrew Tridgell
e8b2b52bae
HAL_ChibiOS: removed STM32_VDD from hwdef.dat
...
use default
2020-04-28 10:32:23 +10:00
Andrew Tridgell
d35fff5186
HAL_ChibiOS: set CS pins high while in bootloader
...
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
2020-03-11 09:53:06 +11:00
Andrew Tridgell
d422825715
HAL_ChibiOS: removed per-board AP_FEATURE_RTSCTS and AP_FEATURE_SBUS_OUT
...
not needed any more
2019-12-18 17:18:44 +11:00
Andrew Tridgell
0a81c48d9c
HAL_ChibiOS: lower gains on CubyOrange and Yellow heater
...
this should reduce the chance of baro oscillation due to rapid change
in heater temperature
2019-11-28 21:35:29 +11:00
Michael du Breuil
21f6695acd
AP_HAL_ChibiOS: Add defaults.parm for CubeOrange and CubeYellow
2019-11-20 20:52:36 +11:00
Andrew Tridgell
e820219202
HAL_ChibiOS: changed optimisation of higher end boards to -O2
...
-O3 does not seem to be a win, and takes up a lot more flash
2019-09-28 08:57:26 +10:00
bugobliterator
cba98096e9
HAL_ChibiOS: move to using hardcoded heater PWM polarity in iofirmware
2019-07-25 17:05:41 +10:00
Andrew Tridgell
1919268801
HAL_ChibiOS: added OTG2 on all F7 and H7 boards with CAN
...
allows for SLCAN on 2nd port
2019-07-12 17:01:21 +10:00
Siddharth Purohit
dcf17e5bc2
HAL_ChibiOS: hwdef: add support for dual cdc on CubeYellow and CubeOrange
2019-07-12 17:01:21 +10:00
Andrew Tridgell
b12cc57c64
HAL_ChibiOS: switched on fast sampling on IMU3 by default on hex cubes
...
as some people are flying with EK2_IMU_MASK=7 this reduces the risk of
aliasing on IMU3
2019-07-11 10:24:45 +10:00
Andrew Tridgell
82b171582e
HAL_ChibiOS: added sensor config for cube varients
2019-05-30 15:39:57 +10:00
Andrew Tridgell
2b0a30a2c5
HAL_ChibiOS: ensure we don't overflow bootloader area
...
this modifies the ld script to use the maximum size available for the
bootloader, so we can't accidentially grow the bootloader beyond its
max size
2019-05-06 12:36:41 +10:00
Siddharth Purohit
7b54103271
HAL_ChibiOS: set pwm select pins high for 3.3V PWMout on startup
2019-04-01 21:30:12 +11:00
Siddharth Purohit
051842ea34
HAL_ChibiOS: add support for PWM Voltage level selection on CubeYellow and CubeOrange
2019-04-01 21:30:12 +11:00
Andrew Tridgell
2842063146
HAL_ChibiOS: optimize CubeYellow build
...
and fixed comment in CubeOrange
2019-03-11 12:40:21 +11:00
Andrew Tridgell
59652ad147
HAL_ChibiOS: added more IMU devices for Hex Cube boards
2019-03-11 12:40:21 +11:00
mirkix
c33b692f53
AP_HAL_ChibiOS: fix CubeYellow build
2018-08-14 06:26:22 +10:00
Andrew Tridgell
5c2c5efc35
HAL_ChibiOS: rename to CubeYellow
2018-07-05 07:53:48 +10:00