Commit Graph

566 Commits

Author SHA1 Message Date
Jason Short 9f7aae5945 removed unused function
Simplified the baro init filter
2011-12-29 23:02:01 -08:00
Randy Mackay ff66a3417c OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin.
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
2011-12-30 12:06:31 +09:00
Andrew Tridgell 1cc38b0701 ACM: check compass health before using it 2011-12-28 20:41:53 +11:00
Andrew Tridgell c27277c7f1 ACM: use new I2C library 2011-12-28 20:41:53 +11:00
Andrew Tridgell 8df91ea885 ACM: enable compass by default on APM2 2011-12-28 20:30:35 +11:00
Andrew Tridgell ef1d8eaeac ACM: update for DataFlash changes 2011-12-28 16:00:49 +11:00
Jason Short a8070d86df Fix for 11 channels of motors. 2011-12-26 14:39:01 -08:00
Andrew Tridgell 0f39336801 ACM: use LED_OFF/LED_ON instead of LOW/HIGH 2011-12-26 19:32:53 +11:00
Andrew Tridgell 7520315475 ACM: fixed HIL build again 2011-12-26 19:17:11 +11:00
Andrew Tridgell cb48bfd054 ACM-log: use DataFlash.df_NumLogs
this fixes the flash size on APM2
2011-12-26 19:17:11 +11:00
Randy Mackay 85167be181 TradHeli - modified the default collective min/max values to restrict movement to about half the full range. 2011-12-26 16:59:01 +09:00
Jason Short a4e00f7459 Tweaks to fix Loiter
Changed save location to int32
added some filtering and smoothing
2011-12-25 15:44:49 -08:00
Randy Mackay c3ea1ca5dc AP_GPS - updated MTK rate to 10Hz and fixed lat/lon printing inaccuracy in Arducopter logs and AP_TEST example sketch 2011-12-25 12:33:06 +09:00
Andrew Tridgell da87622a5f removed "Please run setup" loop from ArduCopter
Chris asked for this to be removed as it was really mucking up the
initial experience setting up ArduCopter via the planner
2011-12-24 18:12:51 +11:00
Jason Short 9e6ea0b167 disabled some tests with warnings 2011-12-23 18:54:38 -08:00
Jason Short 359d186798 added define for optflow 2011-12-23 18:45:01 -08:00
Jason Short bf29f09107 Getting rid of Simple Logging 2011-12-23 18:44:30 -08:00
Jason Short c9a30ccf1f Made WP radius 1 by default 2011-12-23 15:01:53 -08:00
Jason Short f2d6708058 Fixed merge issues 2011-12-23 14:51:40 -08:00
Jason Short a40a026220 added ability to enter Loiter with only optflow available 2011-12-23 14:46:32 -08:00
Jason Short da903d2c3e moved some defines around 2011-12-23 14:46:32 -08:00
Jason Short c8ca841bd7 Fixed resolution issue with Xtrack
Added stub for loiter based on estimation
integrated fix for tracking GPS at slow speeds for loiter
2011-12-23 14:46:32 -08:00
Jason Short ce11f48809 This is the test to deal with big props with lots of inertia. We use a low pass filter on positive acceleration. 2011-12-23 14:46:32 -08:00
Jason Short fa2fa37f3b initing z dampener at arming 2011-12-23 14:46:08 -08:00
Jason Short 8aa6429b1e Too complicated 2011-12-23 14:46:08 -08:00
Jason Short 778c9cd1db added back in the Disabled log - gave up on Log Simple idea 2011-12-23 14:45:56 -08:00
Jason Short 7963a73816 used for testing 2011-12-23 14:42:50 -08:00
Jason Short f892e0b00d increased crosstrack thanks to float math fix
decreased loiter iterm, decreased throttle iterm based on simulator runs
2011-12-23 14:42:50 -08:00
Jason Short 7820d96f4c No longer blocking before initing home 2011-12-23 14:42:50 -08:00
Jason Short dc2103d67f the second accel test is just for fun.
Filtered output for Nav_throttle
2011-12-23 14:42:50 -08:00
Jason Short 6c5f41fe58 Begin to better integrate OptFlow, added necessary globals for Loiter estimation 2011-12-23 14:42:50 -08:00
Jason Short 885548e693 removed some unneeded HIL #defines 2011-12-23 14:42:49 -08:00
Pat Hickey 343228c8cc Log_simple uses identical implementation of do_erase_logs.
* fix build1280.ArduCopter
2011-12-22 13:31:28 -08:00
Pat Hickey 74530de4bb ArduCopter Logging: DISABLED means DISABLED again; CONFIG_LOGGING added
CONFIG_LOGGING selects LOGGING_SIMPLE and LOGGING_VERBOSE. Verbose
logging is the default, implemented in Log.pde. Simple logging is
optional, but the default for the 1280 build, implemented in
Log_simple.pde
2011-12-19 21:04:51 -08:00
Randy Mackay 73ff5138c6 Arducopter - added "//#define APM2_BETA_HARDWARE" to AP_Config.h for developer's who received early version of the board with the old barometer 2011-12-19 22:57:00 +09:00
Jani Hirvinen 9d7eb9cd1a config settings for jD motors 2011-12-19 09:29:05 +07:00
Jason Short a98a0b636a Hexa stability patch bug fix by borna.segulin 2011-12-18 16:38:07 -08:00
Jason Short 2f5da31a05 change Alpha name 2011-12-18 16:38:07 -08:00
Andrew Tridgell 1807585b98 ACM: run mavlink loop while erasing logs 2011-12-18 10:19:41 +11:00
Jason Short 35f0d31b9d Sync logging 2011-12-16 22:02:41 -08:00
Jason Short ed818e4ccf Cleanup
removed Iterm experiment - no noticeable effect in actual flight
2011-12-16 20:47:23 -08:00
Andrew Tridgell 4bbd5392ef removed AperiodicProcess code
this code was never being used, and was more complex than it was
worth.
2011-12-17 07:29:09 +11:00
Jason Short 027b710816 renamed super simple, added framework for auto calc of throttle cruise 2011-12-15 20:51:41 -08:00
Jason Short 2b5c039eae turned off iterm for traverse 2011-12-15 20:51:41 -08:00
Jason Short b484fdab05 added some more throttle imax range
renamed Super Simple
2011-12-15 20:51:41 -08:00
Jason Short fa908795d9 renamed super simple 2011-12-15 20:51:41 -08:00
Jason Short 6a55fe18f6 added altitude to circle mission 2011-12-15 20:51:40 -08:00
Jason Short 4b52b61563 Allows user to specify just an altitude for Circle Mode 2011-12-15 20:51:40 -08:00
Jason Short 05e921f5d0 More power to descend 2011-12-15 20:51:40 -08:00
Jason Short 958693ee5e Addition of nav mode that tries to maintain level 2011-12-14 22:08:42 -08:00
Jason Short b4aafcce05 dupe of landing logic for scripting 2011-12-14 22:08:41 -08:00
Jason Short 96ce429537 made the last step of landing stop navigating so we can drop straight down. 2011-12-14 22:08:41 -08:00
Jason Short 66c974a949 Added failsafe check 2011-12-14 22:08:41 -08:00
Jason Short c7da9c63f1 updated Loiter control to provide an alternative to GPS rate control for users with circling issues. Works in SIM, needs flight testing 2011-12-14 22:08:41 -08:00
Jason Short d5666f287c added loiter control to reset nav 2011-12-14 22:08:41 -08:00
Jason Short 2a7f981fb0 added failsafe check,
enable loiter repositioning
2011-12-14 22:08:41 -08:00
Doug Weibel 737447c8cf Change logging to default on for 2560 2011-12-13 20:53:44 -07:00
Doug Weibel 2687f1c77d Changes to logging file system to avoid problems with 0 and 1 page logs 2011-12-13 20:09:07 -07:00
Michael Oborne be9a741c88 add method of detecting if motors are armed 2011-12-14 06:18:29 +08:00
Randy Mackay 68d1fa6ec7 Arducopter - Attitude.pde - fixed small bug in pitch stabilise 2011-12-13 22:10:51 +09:00
Andrew Tridgell c007fb49b8 IMU: update ACM and APM for flash_leds change in IMU init 2011-12-13 18:19:41 +11:00
Andrew Tridgell 4e4a4a685c fixed two more CONFIG_HARDWARE #ifdef bugs 2011-12-13 17:05:48 +11:00
Jason Short 29788b98bd Adjustments for High Wind enviroments 2011-12-12 17:47:45 -08:00
Jason Short 424a11d269 Stability patch2 - Jose style. 2011-12-12 17:47:45 -08:00
Jason Short 6b1bedc381 Gain updates 2011-12-12 17:47:45 -08:00
Jason Short a386ea5e06 Added a simplified Log that is just GPS for my 1280 board 2011-12-12 17:47:45 -08:00
Jason Short 6bac318def Added param option for Simple mode reset 2011-12-12 17:47:45 -08:00
Jason Short 3edd471983 Upped the max pitch to deal with wind - based on T3 testing 2011-12-12 10:10:33 -08:00
Jason Short e1146b6df6 Just upped the nav_imax value 2011-12-12 10:10:33 -08:00
Andrew Tridgell 6857d9af14 fixed LOGGING_ENABLED default on ArduCopter 2011-12-12 23:40:43 +11:00
Andrew Tridgell e184d1dfe4 quad: fixed the comments on the + motors 2011-12-12 21:01:58 +11:00
Andrew Tridgell ae1ec05dd4 fixed barometer detection on APM2 2011-12-12 15:45:36 +11:00
Andrew Tridgell 483754cb70 fixed == that should be = 2011-12-12 15:19:50 +11:00
Andrew Tridgell cadc5bde1d fixed hil ArduCopter build 2011-12-12 15:14:55 +11:00
Andrew Tridgell dd4498d113 desktop: fixed Wire.begin() build problem 2011-12-12 15:14:55 +11:00
Andrew Tridgell 65ed8cc2c3 added sitl build target 2011-12-12 15:14:55 +11:00
Andrew Tridgell faf58a355b airspeed: use floating point values and better averaging in zero_airspeed()
this makes the calibration of airspeed a bit more accurate, and
prevents truncation of airspeed values
2011-12-12 15:14:55 +11:00
Pat Hickey 067724b4f1 ArduCopter: update AP_Baro constructors & initializers 2011-12-11 15:21:10 -08:00
Pat Hickey 6710cf5c5a Wire and SPI Init: move to sketch system.pde from libraries
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin  removed from AP_Baro_MS5611::init()
* SPI.begin  removed from AP_InertialSensor_MPU6000::hardware_init()

* Both Wire.begin and SPI.begin added very early in init_ardupilot in
  ArduCopter/system.pde and ArduPlane/system.pde
2011-12-11 15:21:10 -08:00
Pat Hickey 67436d7ff2 ArduCopter: Get barometer data in terms of AP_Baro interface
* Major change: Log.pde Log_Write_Control_Tuning has changed significantly
* MS5611 has no concept of RawPres and _offset_press
* Log the get_pressure() instead. (If we don't trust the barometer, what's the point?)
2011-12-11 15:21:10 -08:00
Pat Hickey bd00b629e7 ArduCopter Init: different call to barometer.init based on CONFIG_BARO
* BMP085 has two arguments, second varying on apm1/apm2
* ms5611 has no arguments
2011-12-11 15:21:10 -08:00
Pat Hickey 82b8f4d7b7 ArduCopter: instantiate correct AP_Baro object based on CONFIG_BARO 2011-12-11 15:21:09 -08:00
Pat Hickey 5fd8fea957 ArduCopter & ArduPlane: Added support for apm2beta build via APM2_BETA_HARDWARE define
* This enables the BMA085 driver for compatibility with beta boards.
* The CLI_SLIDER_ENABLED=DISABLED line does not need to be in the makefile.
  config.h takes care of this default.
2011-12-11 15:21:09 -08:00
Pat Hickey 0b0922d04c ArduCopter: added config.h and defines.h to support CONFIG_BARO 2011-12-11 15:21:09 -08:00
Pat Hickey 698a231dd6 ArduCopter: Rename APM_BMP085 classes to AP_Baro_BMP085 classes. 2011-12-11 15:21:09 -08:00
Pat Hickey 05b6f4be81 ArduCopter CLI: Add imu.init before imu.init_accel for "level"
* Depending on when you entered the CLI, the imu might not be
  initialized yet, and init_accel would hang.
2011-12-11 15:19:46 -08:00
Pat Hickey 273492bc66 ArduCopter: Revert "Switched to Gyro only startup"
This reverts commit f932f0a9f6a29e9c3193622109298c657ed5a908.

I fixed this bug in 734185599cd9d6a487c675460c09895172e012b0.

It is no longer valid to call IMU::init_gyro() before IMU::init().
2011-12-11 14:50:02 -08:00
Jason Short 4efbae4a1c Hack to prevent fly aways
Cleanup to remove SIMPLE mode switch note
2011-12-11 12:01:06 -08:00
Jason Short c01361a79d removed CLI switch by default, decreased Nav I 2011-12-11 09:53:44 -08:00
Jason Short b442a1b23c added debug prints, broke out Angle val to debug 2011-12-11 09:53:44 -08:00
Jason Short 4ff5d5016a fix for navigation scaleLongUp 2011-12-11 09:53:44 -08:00
Randy Mackay 26705111e1 ArduCopter - small fixes to fix HIL compile errors 2011-12-11 23:25:03 +09:00
Randy Mackay 62a7b19600 Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Jason Short a0cef1cc88 made it so nav is called in Simple mode 2011-12-10 23:31:37 -08:00
Jason Short 995727383b Adjust Simple mode on the fly. 2011-12-10 23:29:29 -08:00
Jason Short 37f1a574fa Set Nav_WP as home 2011-12-10 23:26:10 -08:00
Jason Short 64cb2a54cf eased up on the i term blocker 2011-12-10 23:25:52 -08:00
Jason Short 9c3475f168 Made landing slower 2011-12-10 19:33:19 -08:00
Jason Short 2b06a54fc5 Allows you to clear the stored mission when in Auto 2011-12-10 19:32:46 -08:00
Jason Short 6228dfb37c Will add a landing command to last WP if we are on the ground. 2011-12-10 19:29:42 -08:00