Commit Graph

9040 Commits

Author SHA1 Message Date
Randy Mackay 13ee672eae Copter: remove unused get_acro_pitch and roll 2013-09-09 10:11:23 +09:00
Andrew Tridgell f6688582a6 Plane: added FENCE_ACTION=3 behaviour
this makes it safer to enable the geofence as a receiver failsafe
mode. It retains manual throttle control, so if it triggers on the
ground due to the receiver losing signal from the transmitter then the
throttle can be kept low, preventing an unexpected takeoff.
2013-09-08 07:31:10 +10:00
Andrew Tridgell 7328369b91 GCS_MAVLink: added FENCE_ACTION_GUIDED_THR_PASS 2013-09-08 07:29:30 +10:00
Andrew Tridgell ff0f6bcd42 AP_InertialSensor: fixed example build 2013-09-07 21:03:59 +10:00
Andrew Tridgell 905c84bb4c PX4: move PX4IO update to before any sensors start
this seems to make the update much more reliable, possibly as it
avoids an interrupt load from l3gd20 driver
2013-09-07 17:39:51 +10:00
Andrew Tridgell b8b72819c1 AP_Compass: ignore COMPASS_ORIENT for internal compass
this means if COMPASS_ORIENT is not 0 and the external compass fails
to start on boot we don't end up with a bad compass orientation
2013-09-07 16:49:51 +10:00
Craig3DRobotics 630095adaa Revert "Copter: Corrected SR0 & SR3 parameter descriptions"
This reverts commit 6568234018.
2013-09-06 09:58:19 -07:00
Andrew Tridgell ef6407988b PX4: avoid nsh redirects in if statements
this helps avoid FAT filesystem corruption
2013-09-06 22:14:04 +10:00
Andrew Tridgell e43234874a build: avoid rebuilding PX4 archives for each copter type
this should make build_binaries.sh much faster
2013-09-06 20:05:23 +10:00
Craig3DRobotics 2b726abe0e Plane: Correction on SR0 & SR3 parameter description. 2013-09-05 22:29:10 -07:00
Craig3DRobotics f1a674ad26 Copter: Correction on SR0 & SR3 parameter description. 2013-09-05 22:28:34 -07:00
Craig3DRobotics a6efe45bf5 Rover: Correction on SR0 & SR3 parameter description. 2013-09-05 22:27:17 -07:00
Andrew Tridgell b992423f4d autotest: log versions of trees in build log 2013-09-06 11:46:19 +10:00
Andrew Tridgell 7536e0759d PX4: enable rgbled on FMUv1 2013-09-06 08:15:31 +10:00
Andrew Tridgell 5484b97419 AP_GPS: reset _fix_count to 0 on nav settings update
this makes it run every 20s exactly
2013-09-04 13:18:00 +10:00
Andrew Tridgell 879d44f930 AP_GPS: use the mask bits to only set dynamic model
this ensures we don't try to change any other CFG_NAV5 settings
2013-09-04 13:17:20 +10:00
Andrew Tridgell cfeecdae46 Rover: raise GPS serial buffer size 2013-09-04 13:17:02 +10:00
Andrew Tridgell c15d784976 autotest: added comment for typical command line 2013-09-04 13:16:14 +10:00
Andrew Tridgell 0c926c38b1 PX4: boot the FMU bootloader in ROMFS 2013-09-04 13:15:51 +10:00
Andrew Tridgell fa107bdb58 PX4: moved UART handling to its own thread
this prevents slow writes to the SD card from interfering with MAVLink
or GPS serial communication
2013-09-04 13:15:27 +10:00
Andrew Tridgell 474a6d1218 PX4: added FMU bootloader images to ROMFS
this makes it much easier for users to update their bootloaders
2013-09-04 12:53:56 +10:00
Andrew Tridgell 639f479c45 build: cope with config.mk from configure
the HAL_BOARD syntax doesn't work with shell with set -e
2013-09-04 12:03:54 +10:00
Andrew Tridgell 4a8c9a7765 Plane: support reboot to bootloader 2013-09-04 11:59:16 +10:00
Andrew Tridgell 979636936d Copter: support reboot to bootloader 2013-09-04 11:59:02 +10:00
Andrew Tridgell 1ca1b1e36e Rover: support reboot to bootloader 2013-09-04 11:58:41 +10:00
Andrew Tridgell 7082e0f8aa AP_HAL: added hold_in_bootloader parameter to scheduler->reboot() 2013-09-04 11:58:13 +10:00
Andrew Tridgell 1328316bfc AP_Airspeed: fixed saving of airspeed ratios 2013-08-31 10:26:27 +10:00
Paul Riseborough 1c7bdc40ec AP_Airspeed : Expanded range of ARSPD_RATIO adjustment 2013-08-31 08:03:11 +10:00
Andrew Tridgell 8bb35f5dad firmware: fixed link name 2013-08-30 20:21:43 +10:00
Andrew Tridgell 25255d79e8 PX4: cope with relative path for PX4_ROOT in build_binaries.sh 2013-08-30 17:59:32 +10:00
Andrew Tridgell 35ae989675 firmware: update MP icon 2013-08-30 16:33:45 +10:00
Andrew Tridgell 835740b387 firmware: added MissionPlanner link to top level 2013-08-30 16:18:14 +10:00
Andrew Tridgell e8fc8cea01 AP_Scheduler: updated docs 2013-08-30 15:33:30 +10:00
Andrew Tridgell 8d08f6d669 AP_Relay: document new relay pin numbers 2013-08-30 15:21:23 +10:00
Andrew Tridgell 5e33bbd197 PX4: fixed sense of relay pins 2013-08-30 15:05:29 +10:00
Andrew Tridgell a00e4a1e83 Plane: send GCS message on relay change
makes it easier to debug
2013-08-30 15:05:16 +10:00
Andrew Tridgell 45cf82ba15 Plane: removed CONFIG_RELAY check
relay is always available
2013-08-30 14:40:47 +10:00
Andrew Tridgell c56017d8f1 AP_AHRS: added in new orientations 2013-08-30 14:19:17 +10:00
Andrew Tridgell 9320e82ac2 AP_Compass: added in new orientations 2013-08-30 14:19:03 +10:00
Andrew Tridgell 38bf6b8587 Rover: change to 2.43beta3 2013-08-30 14:02:49 +10:00
Andrew Tridgell 4762b3e7c6 Plane: change to 2.75beta2 2013-08-30 14:02:21 +10:00
Andrew Tridgell fbf79c07f0 AP_Compass: added COMPASS_EXTERNAL option
this allows configuring of a compass as being externally attached
2013-08-30 14:02:09 +10:00
Andrew Tridgell dadd3ee4ea PX4: upload both v1 and v2 firmwares on firmware.diydrones.com 2013-08-30 13:39:39 +10:00
Andrew Tridgell 11676d3faa PX4: no need to build px4-io now 2013-08-30 13:35:31 +10:00
Andrew Tridgell 935546d80d PX4: setup build layout to assume PX4Firmware and PX4NuttX trees
both in directory above ardupilot
2013-08-30 13:32:23 +10:00
Andrew Tridgell b7c915e7c4 VARTest: update to GPLv3 license headers 2013-08-30 13:01:39 +10:00
Andrew Tridgell 52f5b1e5a7 Copter: update to GPLv3 license headers 2013-08-30 13:01:39 +10:00
Andrew Tridgell 97b7130bb9 libraries: update license header to GPLv3
we switched to GPLv3 a long time ago, but neglected to update the
per-file license headers
2013-08-30 13:01:39 +10:00
Andrew Tridgell b29369bc03 AP_Notify: fixed examples build 2013-08-30 13:01:39 +10:00
Andrew Tridgell 905e07edf9 AP_Mount: fixed examples build 2013-08-30 13:01:39 +10:00