Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-03 22:48:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
5,689 Commits 71 Branches 510 Tags 754 MiB
c1fbad52c0
Commit Graph

426 Commits

Author SHA1 Message Date
Adam M Rivera
8128fb2d5f Merge branch 'master' of https://code.google.com/p/ardupilot-mega into auto-approach 
Conflicts:
	ArduCopter/Parameters.h
 2012-04-16 10:23:01 -05:00
Adam M Rivera
637f778dd0 ArduCopter: Updated param name from auto_land_timer to loiter_timer, because it could really be used for more routines like auto-approach. Added timer before approach (20s). 2012-04-16 10:07:57 -05:00
rmackay9
4dadd888d8 ArduCopter - CH6 Tuning - added AHRS_YAW_KP parameter as 30. Now you can easily set the amount that the mag is used to correct the gyro based yaw estimate in the DCM 2012-04-16 23:47:57 +09:00
Adam M Rivera
f27b5d538b ArduCopter, commands_logic: Updated logic to allow as low as 5m. 2012-04-15 19:50:05 -05:00
Adam M Rivera
e4940ec3bb ArduCopter: Added check to make sure user defined approach alt is at least 5. 2012-04-15 16:58:22 -05:00
Adam M Rivera
d1a7fdb9ef ArduCopter: Added check to g.rtl_approach_alt, which if greater than zero will initiate an approach to the target alt rather than land. 2012-04-15 16:54:43 -05:00
rmackay9
ccb21613b5 ArduCopter - updated firmware version to "2.6 Beta" 2012-04-14 14:26:44 +09:00
rmackay9
33bd558a94 ArduCopter - LEDS - main code to support COPTER_LEDS. 
Code by Robert Lefebvre
 2012-04-12 22:55:44 +09:00
rmackay9
544237d60a ArduCopter - add includes for new AP_Motors classes. 
Remove global motor_filtered and motor_out arrays.
Removed all global heli variables.
replace "motor_armed" with "motors.armed()"
removed output to rc_4 for tri because this is now handled by AP_MotorsTri class
 2012-04-04 22:50:43 +09:00
Andrew Tridgell
40d7b07789 MAVLink: port the new adaptive flow control to ArduCopter 
This allows for arbitrary stream rates, and supports flow control if
you are using a 3DR radio
 2012-04-02 11:18:53 +10:00
rmackay9
b0c9a25024 ArduCopter - CH6 tuning - changed Roll/Pitch Rate D tuning to use the user supplied tuning range instead of the range / 100. 
also changed heli_ext_gyro_gain to make it use the tuning range directly.
 2012-03-31 09:28:25 +09:00
Andrew Tridgell
58f539ca35 ACM: removed FORCE_AUTOMATIC_DECLINATION_UPDATE 
we now have the EEPROM option COMPASS_AUTODEC instead
 2012-03-30 14:25:27 +11:00
Adam M Rivera
0727955fe3 ArduCopter: Changed implementation of configuration value for automatic declination. There is now a FORCE_AUTOMATIC_DECLINATION_UPDATE that when enabled will update the declination on every GPS 3D fix regardless of whether or not the user saved a value to the EEPROM. By default the declination will only be set by the automatic declination routine if the user has not saved a declination to the EEPROM. 2012-03-30 14:25:06 +11:00
rmackay9
a12a7a7d87 ArduCopter - added CH6_STABILIZE_KD tuning value 2012-03-29 21:09:41 +09:00
rmackay9
2cc87af180 Added multiple new tuning parameters to the inflight channel 6 tuning feature: 
#define CH6_YAW_KI 24
        #define CH6_ACRO_KP 25
        #define CH6_YAW_RATE_KD 26
        #define CH6_LOITER_KI 27
        #define CH6_LOITER_RATE_KI 28
 2012-03-28 23:58:58 +09:00
Andrew Tridgell
4821eb4807 ACM: enable the new compass offset nulling in ACM 2012-03-27 15:37:24 +11:00
rmackay9
eb55234809 ArduCopter - updated firmware version to 2.5.3 2012-03-25 09:13:51 +09:00
rmackay9
1f253c5217 ArduCopter - altitude hold - ensure throttle_avg is initialised from g.throttle_cruise parameter 2012-03-23 23:48:24 +09:00
rmackay9
19981d4864 ArduCopter - updated to firmware version to 2.5.2 to avoid confusion with post 2.5.1 versions posted to downloads area 2012-03-23 23:12:49 +09:00
rmackay9
198ac97914 ArduCopter - updated version to 2.5.1 2012-03-20 17:08:18 +09:00
Andrew Tridgell
690ad58a64 AHRS: adapt ArduCopter for new AHRS framework 2012-03-19 17:29:02 +11:00
Jason Short
223a6f80c8 ACM: Arducopter.pde - Added a constraint to the NO_NAV mode to be similar to the Loiter and rate nav modes. 2012-03-18 22:31:22 -07:00
rmackay9
bed667c62e ArduCopter - small change to ensure both roll and pitch commands are zero before switching out of loiter_override (loiter override becomes true when roll+pitch command is greater than 5 degrees and switches back to false when both become zero) 
- remove incorrect comments about when loiter target position is reset.
 2012-03-18 15:16:04 +09:00
Jason Short
234a5dc65e ACM: Small fix to nav_throttle to prevent too fast of a landing. 2012-03-16 14:10:19 -07:00
Jason Short
1ecca36dd0 Fixed Scaling bug in Sonar mixing 2012-03-16 14:10:19 -07:00
analoguedevices
eb530a2045 Rev'ed version number to 2.5. Added more credits 2012-03-15 02:38:54 +00:00
Jason Short
59fb1f3542 ACM: Added constraints for invalid climb rates. Robert Lefebvre had a bad sonar and very invalid rates crept into the system. 2012-03-13 21:31:16 -07:00
Jason Short
50b4c07261 Lowering the D filter for less latency and less oscillation. 2012-03-13 12:58:46 -07:00
Jason Short
6edad4d9ef ACM: Larger filter for Loiter D 2012-03-13 10:23:30 -07:00
Jason Short
38a60df189 ACM: Rate_d filter for PID loop of Loiter. 2012-03-11 23:21:49 -07:00
Jason Short
2ac29effe9 ACM: The I term in update_nav_wp with the no_nav condition was pulling from the wrong PID loop and was essentially 0 all the time. 2012-03-11 23:21:49 -07:00
Andrew Tridgell
1e47ab26f2 AP_Declination: disable library when AUTOMATIC_DECLINATION is not ENABLED 
unfortunately this library was causing avrdude to fail to load the hex
to my APM2. Until we work out why, it's disabled.
 2012-03-11 21:46:41 +11:00
Adam M Rivera
2e1cacd67f AP_Declination: Added call to compass.set_initial_location if the compass is enabled when the 3D fix is obtained. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Jason Short
8b887b77bd ACM: Added Loiter D tuning 2012-03-10 14:17:57 -08:00
Jason Short
149a484984 ACM: Firmware rev 2012-03-10 12:45:03 -08:00
Jason Short
0ccfdc664d added Force_new_altitude call for alt hold 2012-03-10 12:37:54 -08:00
Jason Short
037221cd02 upped throttle manual boost to 225 2012-03-10 12:37:28 -08:00
Andrew Tridgell
34d25ab298 ACM: removed a lot of the special case code for quaternions 2012-03-10 10:34:31 +11:00
Andrew Tridgell
e780dd2b44 ACM: change DCM loop to 100Hz 
On my APM2 quad this seems to give better results
 2012-03-10 10:34:31 +11:00
Andrew Tridgell
1591d41b33 ACM: make it possible to build ArduCopter with quaternions 2012-03-10 10:34:29 +11:00
Andrew Tridgell
bc81d8e6ac ACM: only call the fast loop if the imu has new data 
this prevents us spinning waiting for the sensors to gather some data
 2012-03-10 10:34:29 +11:00
Jason Short
13e9608fb8 Consolidated Barometer pressure sensing to a single filter based on Randy's new filter class. 2012-03-08 23:13:04 -08:00
Jason Short
43b3e1ccd1 ACM - 
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
 2012-03-06 22:22:14 -08:00
Jason Short
fe5612d38b Added define for throttle range for altitude changes, updated it to 250 2012-03-05 22:12:53 -08:00
Jason Short
a096292edb added stab_d gain scheduling 2012-02-28 20:16:40 -08:00
Robert Lefebvre
b7ccfb0114 Added heli_collectiveFactor array 
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
 2012-02-28 10:49:28 -05:00
rmackay9
8da8ce5b58 ArduCopter - made rate controller filters globals to fix compiler error on Arduino 022 (Arduino 1.0 was fine) 2012-02-28 22:56:26 +09:00
rmackay9
701a21ff2f ArduCopter - modified to work with new Filter library 2012-02-28 21:02:44 +09:00
Jason Short
3ce1633157 Added Loiter Rate Tuning 2012-02-26 11:33:37 -08:00
rmackay9
41ea8e3eff ArduCopter - added #include <Filter.h> to unbreak the build! 2012-02-26 17:05:41 +09:00
rmackay9
add3133100 ArduCopter - change sonar to use new mode filter from Filter library 2012-02-26 15:35:14 +09:00
Jason Short
68739f3cc4 Based on Jani's latest logs I've made two tweaks to alt hold. 
The first is to remove the filter on the throttle output for alt_hold.

The second was to open up the constraint on climb rate. This is to deal with larger than expected disturbances causing altitude changes.
 2012-02-25 13:31:21 -08:00
Andrew Tridgell
6b265c5034 ACM: use a NULL gps pointer in DCM init 
current DCM API does need a GPS reference passed in, but it can be
NULL
 2012-02-25 15:08:49 +11:00
Andrew Tridgell
ce5c7c2c85 ACM: don't pass a gps pointer to DCM 
after discussion with Randy, we don't want ArduCopter to fall back to
GPS for yaw when the compass becomes unhealthy. So we shouldn't pass
the gps object to the DCM code at all.
 2012-02-25 14:51:08 +11:00
Andrew Tridgell
4edf311865 ACM: ensure update_trig() doesn't cause NAN values for cos_roll/cos_pitch 
the DCM matrix could have a value over 1.0 for c.x due to rounding
errors
 2012-02-24 11:52:55 +11:00
Jason Short
92cfc8913a revved a version 2012-02-22 09:00:42 -08:00
Jason Short
207ffee856 made timer unsigned 2012-02-21 21:49:03 -08:00
Jason Short
7bfda28cdc removed old comments 2012-02-19 14:21:27 -08:00
Jason Short
79a9665c9d Added "slow WP" option for RTL. 2012-02-19 13:11:59 -08:00
Jason Short
ba2cfee2fb Updated manual throttle control during throttle hold 2012-02-19 12:40:51 -08:00
Randy Mackay
7c4ef140b9 ArduCopter - remove unnecessary block for next GPS value before saving home location 2012-02-19 15:38:40 +09:00
Jason Short
f86e1ed63f Axis lock beta (off by default) 2012-02-18 21:16:19 -08:00
Randy Mackay
cd89258294 ArduCopter - updated version to 2.4 2012-02-18 18:44:29 +09:00
Jason Short
677df0fe1c added Rate_D tuning value 2012-02-17 15:23:59 -08:00
Jason Short
0d5f7ca072 upped rate loop to 250hz 2012-02-17 15:23:59 -08:00
Jason Short
43e695b1ac removed some unused vars, 
formatting, made loop speed same as PIDT1 to eliminate variable.
 2012-02-16 22:09:21 -08:00
Jason Short
f2b6b86265 allow auto-land if failsafe is triggered 2012-02-15 10:53:54 -08:00
Jason Short
101979ed7b AP slew rate 2012-02-15 09:10:15 -08:00
Jason Short
4ecbb19dcd Added range setting via a parameter for CH6 tuning 2012-02-15 09:10:14 -08:00
Jason Short
ff627a8986 removed unused Vars 2012-02-13 15:25:23 -08:00
Andrew Tridgell
d2a4091716 fixed apm2beta build with AP_Param 2012-02-13 16:22:52 +11:00
Andrew Tridgell
1af6f08b1c adapted main ACM code for AP_Param 2012-02-13 16:22:52 +11:00
Jason Short
0315221bd1 Cosmetic tweaks for tuning 2012-02-11 15:29:11 -08:00
Jason Short
7c45d2bdc3 reset Rate_I for takeoff 2012-02-10 22:50:56 -08:00
Jason Short
927fc25421 made Yaw work like Roll and Pitch 2012-02-10 22:32:55 -08:00
Jason Short
a27bd9db46 2.3.1v 2012-02-09 22:22:01 -08:00
Jason Short
f3547a04a5 Acro fix - we had lost the scaling of Acro mode in 2.1. This restores that. 2012-02-09 22:22:00 -08:00
Jason Short
d161c0451f fix issue with low throttle in air 2012-02-03 13:29:59 +00:00
analoguedevices
256893f385 credits 2012-02-01 04:44:36 +00:00
analoguedevices
d86dbd1c6f Incremented version number to 2.3 2012-02-01 04:39:15 +00:00
Jason Short
3050c1d765 tuning fixes 2012-01-30 21:13:03 -08:00
Jason Short
d93e259289 Added more attributions 2012-01-29 21:53:44 -08:00
Jason Short
af0b0d5a7f made Loiter over ride exit dependent not on speed, but centered sticks. 2012-01-29 16:15:02 -08:00
Jason Short
0213f4dd88 2.2B6 - Please verify Heli still functions properly. 
Added AC_PID lib
Updated landing code
bug fixes
 2012-01-28 22:00:05 -08:00
Jason Short
8fcb2931d7 Cosmetic changes 
GPS LED lock waits for home_is_set to be true
 2012-01-28 21:19:46 -08:00
Jason Short
a685510c38 changed tuning range 2012-01-28 21:18:43 -08:00
Randy Mackay
2db4d2bfe6 OpticalFlow - added OF_LOITER flightmode 2012-01-28 09:27:16 +09:00
Randy Mackay
2f84b54bbb OpticalFlow - replaced PI controller with PID controller. 
Modified optical flow hold to use aggregated position instead of speed.
 2012-01-25 21:55:14 +09:00
Jason Short
8c4b955282 added Beta 4 tag 2012-01-21 22:15:23 -08:00
Jason Short
275815a7c9 Converted to cm for distance 2012-01-21 22:04:35 -08:00
Jason Short
fa06d4a2e3 Calc error for logs 2012-01-21 11:59:49 -08:00
Jason Short
e9a4253cd1 added note 2012-01-20 22:52:31 -08:00
Jason Short
2fa8a343ac Added cast for comparison 2012-01-20 22:52:30 -08:00
Jason Short
ba535ed956 B3 2012-01-20 22:52:29 -08:00
Jason Short
556d646cad set dampening range from 0 - .08 from 0 to .6. The new dampening code has changed units. 
added the ability to force nav_throttle so we  don't get ground effects screwing up baro sensor.
Added more descriptive Rest_I functions
 2012-01-20 22:52:29 -08:00
Jason Short
0f24860552 Altitude no longer resets when moving loiter WP 2012-01-20 22:52:29 -08:00
Jason Short
aa1f09af83 Lowered range to more sensible values 2012-01-20 22:52:29 -08:00
Michael Oborne
7f272b4c4b fix SITL attitude hil AC 2012-01-20 16:32:25 +08:00
Doug Weibel
2ea9db84e0 Update battery monitoring code for ArduCopter 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
changed
 2012-01-15 17:10:02 -07:00
Doug Weibel
17b3e514dc Just a little more commenting work on global variables 2012-01-15 16:11:02 -07:00
Jason Short
7e411f5fb6 This allows users to test the Auto_throttle hold or cruise value 2012-01-14 11:43:52 -08:00
Jason Short
3879e79898 b2 2012-01-14 11:37:00 -08:00
Jason Short
cf51967bbb Fix for SIMPLE mode 2012-01-14 11:32:48 -08:00
Jason Short
e7ad08e209 adjusted GPS watch dog not to be so aggressive, 
removed unneeded flag clearing
 2012-01-14 11:20:40 -08:00
Jason Short
c970ba4f93 made resetting throttle cruise a function 2012-01-13 16:47:08 -08:00
Jason Short
05dce91c24 fixed GPS bug - moved to fast loop location 2012-01-13 12:47:22 -08:00
Jason Short
b9419e0123 moved GPS routines to 50hz loop to avoid delay. 2012-01-12 22:59:47 -08:00
Jason Short
b81f9a5d77 Version 2.2 2012-01-12 22:37:33 -08:00
Jason Short
b884462ce3 removed wind comp code, 
Added Landing boost code
 2012-01-12 22:28:58 -08:00
Jason Short
33fe4db3fc R10 2012-01-11 22:41:51 -08:00
Jason Short
db1fafaaec R9 2012-01-10 23:46:08 -08:00
Jason Short
439c15f3fc Added climb rate control 
removed unused vars
 2012-01-10 23:42:26 -08:00
Jason Short
9cbfcac802 Made timer unsigned 2012-01-10 23:42:26 -08:00
Pat Hickey
8d4db05f50 Rename ArduCopter/config_motors.h to config_channels.h 2012-01-09 21:57:02 -08:00
Pat Hickey
b22920c0ea ArduCopter: Change TRI_FRAME yaw servo output to CH_TRI_YAW define 2012-01-09 21:57:02 -08:00
Pat Hickey
7b056f208d ArduCopter: include config_motors.h in sketch 2012-01-09 21:57:01 -08:00
Randy Mackay
7b9701fdd5 ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow) 
Removed optical flow from regular loiter for now until it's tested.
 2012-01-09 13:53:54 +09:00
Jason Short
fda12c8902 Added Acro to Rate_P 2012-01-08 14:52:10 -08:00
Jason Short
a8574e813d R8 2012-01-07 22:28:03 -08:00
Jason Short
ca80dc549c Made RTL hold position until it reaches altitude 2012-01-07 22:27:26 -08:00
Jason Short
058a3275c3 Revved to R7 2012-01-06 10:22:53 -08:00
Jason Short
d430c847fa Changed default throttle type for failsafe to avoid checking 
changed timer to 20 seconds.
 2012-01-06 10:20:31 -08:00
Jason Short
de912b5054 Auto_land update 2012-01-05 21:57:34 -08:00
Jason Short
beac2930c9 Added auto_land to RTL 2012-01-05 21:15:12 -08:00
Jason Short
a8af509517 timer set to unsigned 2012-01-04 17:31:20 -08:00
Andrew Tridgell
9ee3431928 ACM-simple: don't use uninitialised simple trig values 2012-01-05 10:13:36 +11:00
Jason Short
3ac37c09a9 Upped Revision 2012-01-04 09:28:38 -08:00
Jason Short
a70fdc58a1 Cleaned up and documented each global vavriable 
Added Wind compensation for Stability
Acro mode fixes
 2012-01-04 09:28:37 -08:00
Jason Short
86e01fce17 Cosmetic 2011-12-31 10:54:31 -08:00
Jason Short
e8db2225dd upped to r5 2011-12-31 10:05:13 -08:00
Jason Short
e17c8705ba Loiter I reset 2011-12-31 09:45:25 -08:00
Jason Short
e9d41897df R4 2011-12-30 23:54:02 -08:00
Jason Short
4b2979743f no longer calling reset_nav 2011-12-30 23:48:04 -08:00
Jason Short
f5ffa7bd7e Updated Configs based on field testing. 2011-12-30 23:48:04 -08:00
Jason Short
09db32ee02 Added Nav_bearing, just like APlane 
added fix for LOITER in missions so we don't Yaw in circles
 2011-12-30 23:48:04 -08:00
Jason Short
57b2d17d8a updated rev 2011-12-29 23:02:41 -08:00
Jason Short
4535bc4fd9 lowered to nav_lat and nav_lon int16 
added a version that didn't have I term added to get a better indication of velocity estimation
 2011-12-29 23:02:03 -08:00
Jason Short
aa2e474b80 Added 5 sec Takeoff Timer to clear i terms when lifting 
Moved loiter relocation function to update_nav
moved User hooks to correct place
Added tuning for D term
 2011-12-29 23:02:03 -08:00
Randy Mackay
ff66a3417c OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin. 
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
 2011-12-30 12:06:31 +09:00
Andrew Tridgell
1cc38b0701 ACM: check compass health before using it 2011-12-28 20:41:53 +11:00
Andrew Tridgell
c27277c7f1 ACM: use new I2C library 2011-12-28 20:41:53 +11:00
Jason Short
a8070d86df Fix for 11 channels of motors. 2011-12-26 14:39:01 -08:00
Jason Short
359d186798 added define for optflow 2011-12-23 18:45:01 -08:00
Jason Short
f2d6708058 Fixed merge issues 2011-12-23 14:51:40 -08:00
Jason Short
6c5f41fe58 Begin to better integrate OptFlow, added necessary globals for Loiter estimation 2011-12-23 14:42:50 -08:00
Jason Short
2f5da31a05 change Alpha name 2011-12-18 16:38:07 -08:00
Jason Short
ed818e4ccf Cleanup 
removed Iterm experiment - no noticeable effect in actual flight
 2011-12-16 20:47:23 -08:00
Andrew Tridgell
4bbd5392ef removed AperiodicProcess code 
this code was never being used, and was more complex than it was
worth.
 2011-12-17 07:29:09 +11:00
Jason Short
027b710816 renamed super simple, added framework for auto calc of throttle cruise 2011-12-15 20:51:41 -08:00
Jason Short
96ce429537 made the last step of landing stop navigating so we can drop straight down. 2011-12-14 22:08:41 -08:00
Jason Short
2a7f981fb0 added failsafe check, 
enable loiter repositioning
 2011-12-14 22:08:41 -08:00
Andrew Tridgell
4e4a4a685c fixed two more CONFIG_HARDWARE #ifdef bugs 2011-12-13 17:05:48 +11:00
Jason Short
6bac318def Added param option for Simple mode reset 2011-12-12 17:47:45 -08:00
Andrew Tridgell
ae1ec05dd4 fixed barometer detection on APM2 2011-12-12 15:45:36 +11:00
Pat Hickey
067724b4f1 ArduCopter: update AP_Baro constructors & initializers 2011-12-11 15:21:10 -08:00
Pat Hickey
67436d7ff2 ArduCopter: Get barometer data in terms of AP_Baro interface 
* Major change: Log.pde Log_Write_Control_Tuning has changed significantly
* MS5611 has no concept of RawPres and _offset_press
* Log the get_pressure() instead. (If we don't trust the barometer, what's the point?)
 2011-12-11 15:21:10 -08:00
Pat Hickey
82b8f4d7b7 ArduCopter: instantiate correct AP_Baro object based on CONFIG_BARO 2011-12-11 15:21:09 -08:00
Pat Hickey
698a231dd6 ArduCopter: Rename APM_BMP085 classes to AP_Baro_BMP085 classes. 2011-12-11 15:21:09 -08:00
Randy Mackay
62a7b19600 Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types 2011-12-11 16:40:59 +09:00
Jason Short
995727383b Adjust Simple mode on the fly. 2011-12-10 23:29:29 -08:00
Jason Short
f444aac706 Added SIMPLE mode reset outside of bounding box of 10M, will do more testing before enabling. 2011-12-10 10:19:20 -08:00
Jason Short
7c1a975a71 Made Baro_alt int32_t 
Added home to copter bearing, home to copter distance
Added Land mode
 2011-12-10 10:19:20 -08:00
Jason Short
22e4ed67aa Added Home Bearing 2011-12-10 10:19:20 -08:00
Jason Short
118a232b13 made RateP range a little more sensible 
removed unused var
 2011-12-06 21:03:07 -08:00
Jason Short
ad94166c22 Alt_hold_patch, removed Z dampening from Manual override. Fixed integrator conversion to throttle_cruise 2011-12-04 21:32:33 -08:00
Jason Short
55b2e5339a simple patch to improve alt hold based on stability patch 2011-12-04 21:32:33 -08:00
Jason Short
8e0d8a860b Formatting, swicth Omega to raw IMU rates 2011-12-03 15:29:33 -08:00
Michael Oborne
21143d87b5 add 1hz mavlink loop. 2011-12-04 06:32:08 +08:00
Jason Short
f3b3350d25 Git Test 2011-11-28 10:54:20 -08:00
Jason Short
dddf829c01 removed need to send increment flag to update commands 
constrained climb_rate value
 2011-11-28 10:33:06 -08:00
Pat Hickey
98534e71f7 ArduCopter: rev version number from 2.0.51 to 2.1.0 Alpha 2011-11-25 20:00:19 -08:00
Andrew Tridgell
1d66b075b0 ArduCopter: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell
e297f0cb23 USB-MUX: enable USB MUX switching for ArduCopter 2011-11-25 20:00:19 -08:00
Andrew Tridgell
2bed1dcfd5 desktop: first version of register level SITL support 
this adds register level emulation of the ADS7844 and the RC
input/output hardware on the APM1, allowing for SITL testing without
enabling HIL in the code
 2011-11-25 20:00:18 -08:00
Andrew Tridgell
252e858011 fixed InertialSensor stub build 2011-11-25 20:00:18 -08:00
Pat Hickey
8300e21a8c hil-sensors ArduCopter: fixes to make hil-sensors build work properly 
* requires new stub libraries for InertialSensor and PeriodicProcess.
 2011-11-25 20:00:18 -08:00
Andrew Tridgell
446a9aac84 re-organiser sensor declarations 
this tries to make the #ifdef nesting easier to understand
 2011-11-25 20:00:17 -08:00
Andrew Tridgell
23ccce23d0 purple: timer_scheduler should be in all builds 2011-11-25 20:00:17 -08:00
Pat Hickey
bbae76efb5 purple: switch ArduCopter to new sensor objects 
this uses the new sensor abstractions for the purple/APM1 hardware
choice
 2011-11-25 20:00:16 -08:00
Jason Short
10330abf54 no longer using the raw pressure 2011-11-25 11:34:05 -08:00
Jason Short
4195204161 v number 2011-11-21 22:13:18 -08:00
Jason Short
7f80649566 Added alternate alt hold, 
New ESC Calibration Routine
 2011-11-21 22:12:19 -08:00
Jason Short
57f3eafb52 Made save WP the default 
Cosmetic updates
 2011-11-20 12:50:12 -08:00
Randy Mackay
7ac04af03d ArduCopter Alt Hold - Change to not run get_nav_throttle if manually adjusting altitude with manual_boost - removes possibility of I term running up 
Tuning - added ability to modify altitude (position, not rate) controller
TradHeli - Fairly large change to how throttle is scaled and collective moves.
 2011-11-20 22:30:42 +09:00
Jason Short
188fbfd878 added some params from Arduplane to make Mavlink upgrade easier 
made loiter radius smaller in storage
 2011-11-20 00:22:53 -08:00
Jason Short
85905e3879 missed == 2011-11-19 14:42:57 -08:00
Jason Short
d8529a32a1 return to prev climb rate calc 2011-11-19 13:58:41 -08:00
Jason Short
16eb5641c2 Working implementation of Jump Command 2011-11-16 21:28:56 -08:00
Jason Short
47354b61ce Mission Scripting re-write 2011-11-16 00:22:22 -08:00
Jason Short
d475e7ced5 Added better navigation flag for more accurate dtnav timing 
Added better support for climb rate in SIM
 2011-11-16 00:22:22 -08:00
Jason Short
730668b0c7 scaling width of circle mode to make it more round. 2011-11-13 23:09:42 -08:00
Jason Short
e55ba471bc Moved updated alt to GPS so the climb rate is sane 2011-11-13 22:54:57 -08:00
Jason Short
69be03bab8 slowed Circle flight 2011-11-13 13:41:23 -08:00
Jason Short
ccdfa13edb Update and fix for Circle mode 
HIL updates for altitude
 2011-11-12 21:43:21 -08:00
Jason Short
7df7dbe883 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2011-11-09 22:56:52 -08:00
Jason Short
3cb1f6b197 crosstrack angle variable 2011-11-09 22:56:38 -08:00
Andrew Tridgell
d69afc3945 HIL: allow for fast HIL attitude update in HIL_MODE_ATTITUDE 
this runs it at the full loop rate
 2011-11-10 13:17:06 +11:00
Jason Short
31e05e40fd Fixes for Sim - Missing climb rate calculation 2011-11-08 10:46:52 -08:00
Andrew Tridgell
87d5581046 ArduCopter: use specific sized data types in a lot of places 
this will make the Desktop build more consistent with the real AVR
build, and also with a future ARM build
 2011-11-08 11:05:36 +11:00
Andrew Tridgell
dacf98e201 HIL: enable CTUN log message in ATTITUDE HIL 2011-11-08 07:58:35 +11:00