Commit Graph

1094 Commits

Author SHA1 Message Date
Andrew Tridgell b7ae12a9d3 HAL_ChibiOS: reduce max compasses to 1 on AP_Periph 2019-10-16 08:58:52 +11:00
Andrew Tridgell 97dc76732c HAL_ChibiOS: drop mRoControlZeroF7 DPS310 clock to 5MHz 2019-10-15 10:22:15 +11:00
Henry Wurzburg c515f4b317 AP_HAL_ChibiOS/hwdef: update KakuteF4 readme 2019-10-14 10:04:30 +11:00
Andy Piper 28b866cc8f AP_HAL_ChibiOS: hardware definitions for Kakute F7 Mini 2019-10-12 21:53:55 +11:00
Andrew Tridgell 77bf67e15f HAL_ChibiOS: fixed padding of neopixel bits
lack of padding at start caused occasional glitches in colors
displayed
2019-10-10 10:41:19 +11:00
Andrew Tridgell 15e4641e51 AP_HAL_ChibiOS: cleanup ifdefs for SLCAN enable 2019-10-08 10:02:14 +11:00
Andrew Tridgell 555f56a8af HAL_ChibiOS: removed wait on CAN peripheral in H7
these wait busy loops can take a very long time, and end up causing
interrupts to be lost elsewhere in the system, causing lost bytes on
UARTs

We should not have while loops waiting on peripharals like this. If we
do need to wait for a flag to clear then it needs to be done in a low
priority thread, or we need to check for completion in a timer

CAN still seems to work with this change, but needs flight testing
2019-10-03 15:26:47 +10:00
Andrew Tridgell 47f2f1764d HAL_ChibiOS: generate HAL_MEMORY_TOTAL_KB for each board 2019-10-01 09:29:55 +10:00
Andrew Tridgell e3a965272c HAL_ChibiOS: added Pixhawk1-1M
this is for 1M versions of the Pixhawk1. It is smaller than fmuv2 as
it only links the specific sensors needed for Pixhawk1
2019-10-01 09:08:25 +10:00
Mark Whitehorn d8a07b6c44 HAL_ChibiOS: fix FMU fast_channel_mask
fix IO fast channel mask
use IOMCU chmask to only set right channels
remove unused variable
2019-10-01 07:13:33 +10:00
Andrew Tridgell 748cf39116 HAL_ChibiOS: disable DMA for RCIN on Pixracer
this frees up DMA for USART1_RX, which gives DMA for input over the
SERIAL5 WiFi port, which is important for applications where a
pixracer is being fed vision data over WiFi
2019-09-30 07:58:40 +10:00
Andrew Tridgell e820219202 HAL_ChibiOS: changed optimisation of higher end boards to -O2
-O3 does not seem to be a win, and takes up a lot more flash
2019-09-28 08:57:26 +10:00
Peter Barker 9fb715692e AP_HAL_ChibiOS: correct include of mavlink header for analog debug 2019-09-25 12:22:27 +10:00
Andrew Tridgell 386e7dc3e8 HAL_ChibiOS: fixed delay for OneShot125 channels
we were delaying output for OneShot125 by 8x as much as we need to,
which reduced our max loop rate
2019-09-22 19:43:35 +10:00
Andrew Tridgell 850892c3d9 HAL_ChibiOS: fixes from LGTM errors 2019-09-22 18:35:15 +10:00
Michael du Breuil 95bca05322 AP_HAL_ChibiOS: Only include MAVLink when using the MAVLink debugging 2019-09-19 10:48:25 +09:00
Andrew Tridgell 3c058851b2 HAL_ChibiOS: fixed undef for define lines
this fixes IMU heater enable for CubeBlack+
2019-09-16 12:53:44 +10:00
Andrew Tridgell 255e769171 HAL_ChibiOS: fixed IMU order and board ID for CubeBlack+ 2019-09-16 12:53:44 +10:00
bugobliterator e82da992c9 HAL_ChibiOS: hwdef: add hwdef for CubeBlack+ 2019-09-16 12:53:44 +10:00
Andrew Tridgell 28cca004f2 HAL_ChibiOS: added default params for skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell 1dca0a16f5 HAL_ChibiOS: rename skyviper-f412 to skyviper-journey 2019-09-12 14:02:36 +10:00
Andrew Tridgell b33afde884 HAL_ChibiOS: allow safety button on CUAV_GPS to be used for "stay in bootloader"
allows for recovery of bad CAN firmware
2019-09-10 16:22:33 +10:00
Andrew Tridgell c6a9f067e2 HAL_ChibiOS: enable LEDs on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 3dfe15443d HAL_ChibiOS: fixed orientation of CUAV_GPS compass 2019-09-10 16:22:33 +10:00
Andrew Tridgell 03c1a8bfd9 HAL_ChibiOS: use safety button logic from AP_BoardConfig 2019-09-10 16:22:33 +10:00
Andrew Tridgell 0ea67943b9 HAL_ChibiOS: enable safety button on CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell 186eedf838 HAL_ChibiOS: enable safety LED 2019-09-10 16:22:33 +10:00
Andrew Tridgell 75696997cc HAL_ChibiOS: added buzzer support to CUAV_GPS 2019-09-10 16:22:33 +10:00
Andrew Tridgell cbe0af2463 HAL_ChibiOS: setup for LEDs on KakuteF4
this makes Kopis1 display LEDs properly
2019-09-10 13:03:28 +10:00
Andrew Tridgell f441223b55 HAL_ChibiOS: implement updated NeoPixel API
allow for N leds per chain, and setting separate colours per led in
each chain
2019-09-10 13:03:28 +10:00
Tom Pittenger e3416b66dc AP_HAL_ChibiOS: add Neopixel output type, similar to dshot 2019-09-10 13:03:28 +10:00
Andrew Tridgell 91e8752c17 HAL_ChibiOS: wrap more libc functions
this saves a few k of flash as it avoids linking libc versions of some
functions
2019-09-09 13:31:30 +10:00
Andrew Tridgell 3166f84954 HAL_ChibiOS: added vsnprintf wrapper
this allows us to use a common snprintf implementation
2019-09-09 13:31:30 +10:00
Andrew Tridgell 83872c23e5 HAL_ChibiOS: fixed AP_Periph build 2019-09-06 08:51:45 +10:00
Andrew Tridgell fd80220d3e HAL_ChibiOS: setup PH4-mini RCIN port by default 2019-09-06 08:51:45 +10:00
Andrew Tridgell 54649a0e4f HAL_ChibiOS: fixed KakuteF4 define for SERIAL2 2019-09-06 08:51:45 +10:00
Andrew Tridgell 06b272705e HAL_ChibiOS: run RCIN thread at 1kHz
this gives fast enough response for SBUS parsing on a UART
2019-09-06 08:51:45 +10:00
Andrew Tridgell c841b39ea2 HAL_ChibiOS: switch to AP::RC() for AP_RCProtocol 2019-09-06 08:51:45 +10:00
Andrew Tridgell bf2cf7834d HAL_ChibiOS: fixed a bug in parity/stop-bit setting on STM32F7 and H7
and add get_options() method
2019-09-06 08:51:45 +10:00
Andrew Tridgell ad2890dc5a HAL_ChibiOS: added connector pinouts for PH4-mini 2019-09-06 08:51:45 +10:00
Andrew Tridgell b344946300 HAL_ChibiOS: prevent duplicate sensors in hwdef.dat
throw an error on configure if there is a duplicate
2019-09-05 06:37:35 +10:00
Andrew Tridgell 2c5c8106a5 HAL_ChibiOS: removed duplicate barometer from fmuv5 2019-09-04 21:24:01 +10:00
Andrew Tridgell 708ee47c03 HAL_ChibiOS: fixed f103 rm3100 2019-09-04 16:27:47 +10:00
Andrew Tridgell c2c8702329 HAL_ChibiOS: convert remaining boards to use COMPASS specifier 2019-09-04 16:27:47 +10:00
Andrew Tridgell 3aa01448ff HAL_ChibiOS: use COMPASS specifier for f103-periph 2019-09-04 16:27:47 +10:00
Andrew Tridgell 316e7cf7e6 HAL_ChibiOS: fixed mini-pix compass and baro probing
removed dup baro and fixed compass probe
2019-09-04 16:27:47 +10:00
Andrew Tridgell beca17c638 HAL_ChibiOS: use GET_I2C_DEVICE() for i2c probing
this allows for the driver probing to use a macro to prevent loading
of duplicate i2c devices (AP_Compass does this)
2019-09-04 16:27:47 +10:00
Michael du Breuil e19f0ef238 AP_HAL_ChibiOS: Remove set_stop_pin from AnalogSource 2019-09-04 09:54:50 +10:00
E Thomas c09d6908ed Enabled active buzzer output on OmnibusNanoV6 2019-09-03 09:59:53 +10:00
Andrew Tridgell 72494788f7 HAL_ChibiOS: convert more boards to use BARO specifier 2019-08-28 06:54:11 +10:00