Commit Graph

79 Commits

Author SHA1 Message Date
Randy Mackay 687ec98e5d AP_HAL_PX4: set default servo update rate only when changed
This removes the chance a small switch occurring whenever this function is called
2017-07-26 13:28:07 +09:00
Andrew Tridgell 5b43698e25 HAL_PX4: added rcout set_detault_rate() 2017-07-24 14:07:28 +10:00
Eugene Shamaev 36655310b3 AP_HAL_PX4: support for several CAN interfaces and drivers, filtering support 2017-07-03 11:44:32 +01:00
Andrew Tridgell b8f628da83 HAL_PX4: fixed bug in last_sent
thanks to Francisco
2017-06-21 11:40:12 +10:00
Andrew Tridgell 17893958bf HAL_PX4: cope with brushed motors in read_last_sent()
we need the value before scaling is applied, so slew rates can work
2017-06-21 10:55:24 +10:00
Andrew Tridgell 11396919c8 HAL_PX4: changed BRUSHED16kHz to BRUSHED 2017-06-17 17:37:45 +10:00
Andrew Tridgell 96627bc4e5 HAL_PX4: allow any pulse freq in brushed mode 2017-06-17 17:37:45 +10:00
Andrew Tridgell 9bdb6838e6 HAL_PX4: cope with nested cork/push 2017-05-01 14:32:18 +10:00
Francisco Ferreira 7dca7933fa AP_HAL_PX4: fix UAVCAN armed state to depend on safety switch 2017-04-27 14:04:56 +01:00
Francisco Ferreira 965eda69f3 AP_HAL_PX4: remove left-overs of legacy UAVCAN support 2017-04-27 13:32:43 +01:00
Andrew Tridgell ca4cde9770 HAL_PX4: fixed safety switch light pattern
this was broken by the recent CAN merge. My fault for not checking it
carefully. We have to publish the armed state so the fmu driver on
pixracer can update the light
2017-04-27 13:32:43 +01:00
Eugene Shamaev 0c4a68314b AP_HAL_PX4: removal of legacy UAVCAN support 2017-04-17 17:27:18 +10:00
Eugene Shamaev 7caeaf4be6 AP_HAL_PX4: RCOutput support for UAVCAN 2017-04-10 22:38:12 +01:00
Andrew Tridgell dbfdfa2261 HAL_PX4: fixed a bug in setup of alt rates for upper channels
this affected vehicles with high rates on upper channels, such as hexa
and octa quadplanes. The bug caused the rates set on the upper channels
to also be set on the primary channels, which means the low channels
containing aileron, elevator etc ran at 400Hz instead of 50Hz, resulting
in potential damage to the servos
2017-04-07 20:32:19 +10:00
Andrew Tridgell 02976168cc HAL_PX4: fixed RC rate when BRD_PWM_COUNT=0
if BRD_PWM_COUNT is zero then alt_fd is -1, and we were not setting
servo output rate
2017-04-03 10:05:30 +09:00
Lucas De Marchi f972fed70b AP_HAL_PX4: rename method to follow AP_HAL
This allows to avoid the cast in the HAL, making it easier to replace
the implementation with an Empty::RCOutput while prototyping.
2017-02-26 13:38:24 +11:00
Andrew Tridgell 787a2093ec HAL_PX4: fixed motor test for brushed motors
this fixes zero pwm output on a subset of channels. When using
motortest and asking for a single channel, multiple channels fired due
to an incorrect optimisation
2017-02-02 09:27:48 +09:00
Andrew Tridgell ce5ed66b45 HAL_PX4: auto-scale brushed output with ESC output range 2016-11-30 10:53:26 +11:00
Andrew Tridgell b3286c3da0 HAL_PX4: support MODE_PWM_BRUSHED16KHZ 2016-11-30 10:53:25 +11:00
Andrew Tridgell 00938f7dbb HAL_PX4: fixed enabled channels in init
now this is called from AP_BoardConfig we need to not clear enabled
channels
2016-11-13 13:16:22 +11:00
murata c808ee2f49 Global: To nullptr from NULL.
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
2016-11-02 16:04:47 -02:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell 9d6a5c6f04 HAL_PX4: make ready_to_arm state latching
this fixes a race condition in the handling of the px4io safety switch
2016-10-24 13:36:04 +11:00
Andrew Tridgell 2a44e6a7d7 HAL_PX4: cope with no px4io on FMUv2
don't open px4fmu twice
2016-10-23 17:15:32 +11:00
Andrew Tridgell c825c7b4cc HAL_PX4: disable FMU outputs again on re-engaging of safety switch 2016-10-21 09:10:55 +11:00
Andrew Tridgell c493ba81e4 HAL_PX4: fixed cork() for RCOutput 2016-10-13 10:00:04 +11:00
Andrew Tridgell dddaded8d4 HAL_PX4: fixed a race condition in force_safety_on/off
the status update from IO may not have come through if we force safety
on and then off in quick succession, such as for plane mixer load

this forces the ioctl to be sent at least once
2016-08-16 12:53:34 +10:00
Tom Pittenger 57d6ccc0dd AP_HAL_PX4: skip the 100ms delay on first px4io safety_state async attempt 2016-05-27 11:30:50 -07:00
Tom Pittenger 67aaf7e226 AP_HAL_PX4: defer calls to safety_state switch to queue an async attempt.
- this allows for auto-retries if the state does not set correctly
2016-05-27 21:34:40 +10:00
Andrew Tridgell dda35a366c HAL_PX4: prevent rate changes once oneshot is setup
this fixes a problem with small motor outputs at the start of a motor
test.

Thanks to Luis for reporting this.
2016-05-26 12:18:49 +10:00
Ricardo de Almeida Gonzaga 892cc2ea6f AP_HAL_PX4: Fix typos 2016-05-13 19:20:06 -03:00
Andrew Tridgell eeef28be5e AP_HAL_PX4: fixed hexacopter on Pixracer
the _servo_count was 4 as we didn't re-fetch the count after applying
changes in AP_BoardConfig from BRD_PWM_COUNT
2016-05-11 13:01:15 +10:00
Andrew Tridgell 0af322e90d HAL_PX4: added comment on oneshot 2016-04-22 13:50:05 +10:00
Andrew Tridgell 5ce7ae71a7 HAL_PX4: fixed enabling oneshot on a subset of motors 2016-04-22 13:24:24 +10:00
Andrew Tridgell bcd0d48ced HAL_PX4: fixed non-contiguous motor outputs
this fixes tricopter with chan3 never set
2016-04-22 11:51:08 +10:00
Andrew Tridgell a731caa4ab HLA_PX4: prevent timer disturbance in oneshot mode 2016-04-16 18:52:31 +10:00
Andrew Tridgell d9d6f87195 HAL_PX4: fixed bug in pwm send code
many thanks to Oxinarf for spotting this!
2016-04-16 08:32:04 +10:00
Andrew Tridgell c9dfccfb26 HAL_PX4: improved oneshot support
this now supports oneshot properly on both IO and FMU
2016-04-16 07:30:44 +10:00
Andrew Tridgell 6f284d673a HAL_PX4: enable oneshot support on px4io 2016-04-16 07:30:43 +10:00
Andrew Tridgell 5922e67785 HAL_PX4: allow sbus output on channels beyond BRD_PWM_COUNT 2016-04-14 08:05:06 +10:00
Andrew Tridgell 759b0d6629 HAL_PX4: only support oneshot on FMU outputs for now
oneshot on PX4IO gives some very weird results. I think it is doable,
but will take a bit more work
2016-04-14 08:05:06 +10:00
Andrew Tridgell 934b4dd475 HAL_PX4: support OneShot on PX4
this greatly lowers output latency
2016-04-14 08:05:05 +10:00
Andrew Tridgell 2a6e64e358 HAL_PX4: send all channels to px4io
this allows for 16 channel SBUS out
2016-03-13 10:03:56 +11:00
Jonathan Challinger 4bf3ec0e91 AP_HAL_PX4: implement RCOutput::read_last_sent 2016-03-10 13:56:27 -08:00
Andrew Tridgell 526fb65dd1 HAL_PX4: fixed setting of rcout frequency on alt channels 2016-01-05 09:47:52 +11:00
Andrew Tridgell 78e9b0a4e3 HAL_PX4: check for servo counts changing after boot
this copes with changes to BRD_PWM_COUNT
2015-12-06 14:19:28 +11:00
Lucas De Marchi 0c3733601b AP_HAL_PX4: use init() method without arguments
Override the init() method from parent class that doesn't have a
parameter since it's not used here.
2015-12-02 14:49:11 -02:00
Andrew Tridgell 155e82c1b3 HAL_PX4: fixed PWM output for FMUv4 2015-11-27 18:54:31 +11:00
Caio Marcelo de Oliveira Filho a76c9e0051 AP_HAL_PX4: use millis/micros/panic functions 2015-11-20 12:31:13 +09:00
Lucas De Marchi ce674f6926 AP_HAL_PX4: remove unused write method 2015-09-29 11:53:49 +09:00