7a77832f45
Baro: average over all pressure/temperature samples on MS5611
...
this allows us to use the MS5611 barometer at its full 100Hz sample
rate (80Hz for pressure, 20Hz for temperature). The pressure and
temperature values are averaged between reads without adding any
latency. Previously the driver would throw away values between
readings
This also fixes a race condition in reading from the SPI bus that
could lead to bad values from the barometer
2012-07-02 13:44:53 +10:00
f7b06e0a64
Baro: fixed build of MS5611 test code
2012-07-02 13:44:53 +10:00
2bd5cd3b9a
AnalogSource: added some example code
2012-07-01 15:01:05 +10:00
0341e0e5f0
SITL: added support for new analog source
...
removed analogRead() to prevent people using it
2012-07-01 15:01:05 +10:00
2046e396a2
AnalogSource: make the Arduino AnalogSource interrupt driven
...
this fixes several problems with reading analog sources:
- we were getting poor values because we didn't wait long enough for
an analog source to settle
- we wasted a lot of CPU cycles waiting for conversions
- we were not taking averages over many samples, which we did with
the old AP_ADC driver on the APM1
2012-07-01 15:01:05 +10:00
b5aa821071
AHRS: include the P terms in get_gyro()
...
this makes it more useful for navigation controllers
2012-06-29 21:54:09 +10:00
02b9ea4dfe
MPU6k: removed an unused variable
2012-06-29 21:54:09 +10:00
117bae9585
SITL: added SITL class for controlling simulation
...
this holds mavlink settable parameters for controlling sensor noise
levels
2012-06-29 15:10:51 +10:00
37494dda2b
AHRS: don't add the P terms in _omega
...
this can lead feedback via the _P_gain()
2012-06-29 15:10:51 +10:00
21ae2957fb
AHRS: disable barometer for vertical acceleration
...
this seems to have been the cause of the 'flips' seen by Marco and
others. Testing by Craig and Alan shows that the flips are gone when
the barometric acceleration is removed.
It looks like a 5 point average filter is not enough to keep the
vertical acceleteration noise low. With high noise in the z axes, the
x and y axes are scaled back when the ge vector is normalised.
2012-06-28 11:12:49 +10:00
e531061caa
AHRS: re-instate new DCM drift correction code
...
This reverts commit 078489638d47fbaffde7c51249e36b5a8fc4ef9d.
2012-06-28 11:09:22 +10:00
8600ad8d7f
AHRS: revert to the old drift correction algorithm
...
we need to work out why Craigs quad flipped today before we enable
this new drift correction
2012-06-27 18:16:41 +10:00
70bfacc350
SITL: removed an unused variable
2012-06-27 16:01:50 +10:00
57579e494b
Barometer: fixed airstart for APM
...
we need to re-load the ground pressure and temperature from eeprom on
and airstart
2012-06-27 16:01:50 +10:00
ce016b5ae8
AHRS: include P term in omega
...
thanks to Jon for suggesting this
2012-06-27 16:01:50 +10:00
0fa1f29cf3
AHRS: implement spin rate limits
...
this follows the method that Bill developed in his fastRotations
paper. We've demonstrated that this is indeed needed in APM, as we
were able to produce the 'dizzy' effects in both the ArduPlane and
ArduCopter simulator
2012-06-27 16:01:50 +10:00
3ffecc18d8
AHRS: cope with copters with no compass
...
if a copter doesn't have a compass, we can't use the GPS for gyro
drift correction
2012-06-27 16:01:50 +10:00
3458962184
GPS: test the more modern MTK16
2012-06-27 16:01:50 +10:00
426006d98f
SITL: fixed GPS heading in simulated UBlox
...
longitude scale does not apply to velocity->heading conversions
2012-06-27 16:01:50 +10:00
20c1baf585
SITL: changes UBlox simulation to 5Hz
...
this matches the real UBlox driver
2012-06-27 16:01:50 +10:00
d9583ae5eb
Compass: remove the need to call calculate() on the compass object
...
the new AHRS code doesn't use calculate() and the compass.heading
attribute. Instead it works on the raw magnetometer vector. This
change removes the internal calculate state from the compass object
and instead adds calculate_heading() for use by older code that
doesn't go via AHRS.
This significantly reduces the calculation involved in compass updates
The null offsets enable/disable code is also removed, as it is not
needed now that compass offsets are not linked to the AHRS state.
2012-06-27 16:01:50 +10:00
5370f9c411
AHRS: normalize the ge vector in drift correction, and use barometer
...
The normalisation ensures the error term scales uniformly with
different accelerations.
The barometer is used for vertical acceleration estimation
2012-06-27 16:01:50 +10:00
53e950531e
Baro: added get_altitude() and get_climb_rate() interfaces
...
this allows the barometer driver to calibrate and return altitude and
climb rate values. This will be used by the AHRS drift correction code
for vertical velocity
The climb rate uses a 5 point average filter
2012-06-27 16:01:50 +10:00
9fd3d15026
Filter: added 5 point average float filter
2012-06-27 16:01:50 +10:00
1ff9461bfb
AHRS: brought DCM more inline with Bill's implementation
...
omega_I applied continuously. _ki larger. Stop integrating when _omega.length()>20
The key change was the scaling of ge to ensure the error is not
quadratic
2012-06-27 16:01:49 +10:00
73faaddc1b
AHRS: first successful version of Bills new drift correction system
...
This makes 3 major changes:
1) fixes the scaling of the yaw drift correction term to fix the time
constant
2) don't integrate the mag vector over multiple readings
3) accumulate omega_I changes over 15 seconds before applying, to try
to prevent omega_I picking up short term responses
2012-06-27 16:01:49 +10:00
0399aa9480
AHRS: update for new _fly_forward flag
2012-06-27 16:01:49 +10:00
2600afe18a
AHRS: implement Bills new drift correction algorithm
...
this is an initial implementation of this paper:
http://gentlenav.googlecode.com/files/RollPitchDriftCompensation.pdf
2012-06-27 16:01:49 +10:00
5316a45c20
AHRS: added GPS support to AHRS test
2012-06-27 16:01:49 +10:00
19954f30e5
GPS: added velocity and acceleration components
...
used by AHRS for acceleration correction
2012-06-27 16:01:49 +10:00
2b352d2b5c
Math: added comment
2012-06-27 16:01:49 +10:00
f23cebc808
Math: moved more template functions to the .cpp files
...
save a bit more code space for larger functions
2012-06-27 16:01:49 +10:00
c034e38cbd
ArduCopter HIL: changed calls to setHIL to send in time as a uint32_t (it was a float)
2012-06-26 22:50:17 +09:00
abb6eb2471
Added a crude Lead Filter. Needs some fine tuning, lag specification, scaling. Works great on 4hz GPS such as Mtek.
2012-06-21 11:14:20 -07:00
cd0411ba33
Add linebreaks to increase readability.
2012-06-21 00:36:10 +02:00
be6923be0f
Improve parameters descriptive text
2012-06-21 00:20:37 +02:00
1ead5f1690
Documentation improvements, no functional changes (only comments)
2012-06-17 22:53:54 +02:00
8f646467e5
Move local temp variables to the stack it saves 1952 bytes
...
Add function comments
Only use _ on class member variables
Only point to a 3D GPS point if GPS has a fix
Implement MAV_MOUNT_MODE_MAVLINK_TARGETING
2012-06-17 22:25:51 +02:00
d9e6a1ece9
Added support for channel curves (and expo) to AP_RC_Channel class. Also updated AP_RC_Channel example/test to demonstrate and test new functionality
2012-06-15 08:40:14 +00:00
ceba24ff8f
Added support for channel curves (and expo) to AP_RC_Channel class. Also updated AP_RC_Channel example/test to demonstrate and test new functionality
2012-06-15 08:38:52 +00:00
b32726e867
GPS: need pgmspace.h for _write_progstr_block()
2012-06-15 16:27:11 +10:00
ae9883a8e2
GPS: fixed auto-config of UBlox setup with no UBX messages
...
if a UBlox is configured for NMEA only, with no UBX messages at all
then it would never trigger the GPS_AUTO detection. This adds a UBX
config message to the init strings that enables the NAV_SOL message
2012-06-15 15:53:27 +10:00
b7e807cd58
FastSerial: added tx_pending() method
...
this allows the caller to wait for the tx buffer to drain
2012-06-15 15:53:27 +10:00
a12cb8fd9a
Added camera trigger functionality
2012-06-13 21:00:20 +02:00
f7ef60565e
Add "3 axis camera stabilization" and "point camera to 3D point" functionality
...
Patch by Gregory Fletcher and reviewed by me
2012-06-13 20:55:19 +02:00
e9226d6f0a
Spellcheck
2012-06-13 20:44:35 +02:00
fca914b7cf
AP_GPS_NMEA: fix from Roberto Navoni to improve NMEA accuracy
2012-06-12 20:27:50 +09:00
f9c5b135bc
GPS: use the new nav_setting in a couple of the sample sketches
2012-06-10 16:35:13 +10:00
0542539fc9
GPS: add stub settings for nav_setting in the other GPS drivers
...
only Ublox supports nav_setting so far
2012-06-10 16:34:53 +10:00
926dfbc0e9
GPS: added auto-configuration of UBlox GPS
...
the Ublox will now auto-configure for 5Hz with just the messages we
want. It also supports setting the navigation engine type
2012-06-10 16:34:13 +10:00
04a71197f9
FastSerial: avoid buffer re-allocation on re-open if possible
...
we commonly re-open serial ports a lot in the AUTO GPS driver
2012-06-09 07:43:22 +10:00
f347572fc2
SITL: map() is a C++ function, so needs to be in C++ part of the header
...
this fixes the ACM build
2012-06-08 17:09:23 +10:00
9adaacedcd
GPS: added debug code to the main GPS class
2012-06-08 16:42:03 +10:00
f4718cafad
GPS: re-open the serial port with a 256 byte serial receive buffer
...
this ensures all GPS parsers have a 256 byte buffer available
2012-06-08 16:42:03 +10:00
ddebf7b443
GPS: fixed the UBLOX parser to handle unknown messages
...
the parser was broken in several ways:
1) when it received an unknown message it didn't update the ck_a and ck_b fields, so it
thought the message had a bad checksum, which meant it got out of protocol sync
2) the read() method would return false if the last message from the GPS was of an unknown type.
So we relied on the last msg always being one that we understand and want
3) the parser considered any valid UBLOX message to be 'new data', whereas we only actually get
a new fix when we get box a new position and velned message
4) the total message size per update is more than 128 bytes, but the serial port was opened
with only a 128 byte buffer, so we got corruption regularly
2012-06-08 16:42:02 +10:00
148e59a4de
GPS: tidy up the auto gps test
2012-06-08 16:42:02 +10:00
f7be9a4b5d
TradHeli adding ramp up time to Ch8 Throttle Pass-through.
2012-06-07 22:55:47 -04:00
0c8078c436
AP_MotorsHeli Syntax correction.
2012-06-04 15:53:07 -04:00
43fe5bab78
re-enable the AP_Mount build
2012-06-04 19:32:11 +10:00
b4fbda7a28
GPS: fixed a race condition in the ublox driver
...
the status update comes as a separate message from the lat/lon
2012-06-04 14:47:58 +10:00
a6c1a86c23
mavlink: fixed build with uart resend
2012-06-04 13:45:55 +10:00
1ad17bc78c
MAVLink: updates to mavlink headers to fix mavlink 1.0 issues
2012-06-04 13:34:07 +10:00
4f7a80a04d
Mavlink: fixed library build for MAVLink 1.0
2012-06-04 13:14:52 +10:00
34234b7003
SITL: fixed SITL build with mavlink10
2012-06-04 13:14:52 +10:00
7602f698eb
mavlink10: fixed MAV_VAR -> MAVLINK_TYPE
2012-06-04 13:14:51 +10:00
2c3bfd896a
MAVLink: updated to latest upstream mavlink
...
this includes no significant changes
2012-06-04 13:14:51 +10:00
1ebfb8fe25
GPS time set to unsigned int32
2012-06-03 11:13:50 -07:00
bad6591e6d
AP_Baro: fixed comment to clarify that every-other call updates temperature or pressure
2012-06-03 17:31:17 +09:00
8f8e91a620
ArduCopter: Another attempt at fixing the lat/lon printing bug in which small negative lattitudes or longitudes were appearing as positives.
...
Fixed in both ArduCopter Log.pde and the GPS Auto test sketch
2012-06-03 16:58:19 +09:00
080c5184d5
ArduCopter Desktop Build: added definition of "map" to wiring.h and included WMath.cpp to fix SITL build failures.
...
All real work on this issue done by Michael Oborne.
2012-06-02 17:46:00 +09:00
8f3169a200
AP_MotorsHeli: Added reference to "Arduino.h" to allow autotest builder to work.
...
Moved around initialisation of parmeters in AP_MotorHeli object to remove compiler warnings.
2012-06-02 16:13:23 +09:00
3246f2bad3
RC_Channel library: change all "int" types to "int16_t".
...
Fixes SITL compile error due to type mismatch of set_pwm between .h and .cpp file (this only occurs because on the SITL, "int" is actually "int32_t"
2012-06-02 14:20:58 +09:00
37e4637c13
RC_Channel.pde: fixed compile errors so that it actually works!
2012-06-02 14:00:44 +09:00
df3fb5c041
ArduCopter: fixed print_latlon bug in which it would print negative lat/lon numbers incorrectly (i.e. -1234567890 would be printed as -124.xxx).
2012-06-02 12:51:12 +09:00
477aa6e47a
RC_Channel fix for throttle output.
...
throttle was outputting incorrectly and allowing the user to max out the throttle leaving nothing for attitude control
2012-05-31 14:59:03 -07:00
7ee38df5a2
Issue 416: RC_Channel – Fix to make dead_zones still output 0
2012-05-31 12:05:47 -07:00
2cc9fde3c9
removed never used filter, and fixed a constrain that could make range calcs go bad
2012-05-31 11:45:07 -07:00
00cabc6343
Channel rage fix - low output was always 0 vs _low
2012-05-31 11:31:48 -07:00
bafb478924
TradHeli: Incorporating Ext ESC Control
2012-05-30 21:50:25 -04:00
ffc04b7305
Fix TradHeli Collective Yaw Effect bug.
2012-05-25 15:25:21 -04:00
734dcebb2a
SITL: fixed ChipErase()
...
the loop never completed
2012-05-23 21:15:45 +10:00
5e0d937e50
SITL: fixed build with new ChipErase() call
2012-05-23 17:33:33 +10:00
c2fb8a7a98
DataFlash: use ChipErase() instead of PageErase() on all pages
...
This makes the DataFlash erase much faster (about 6 seconds instead of
about 60 seconds).
We need to test and ensure the behaviour is equivalent apart from the
speed
2012-05-22 19:29:02 -07:00
8f27297896
DCM: fixed a bug when using GPS for yaw correction
...
When using GPS for yaw correction we need to apply the x and y omegaI
corrections from the _omega_I_sum in the period before we get to the
minimum ground speed for GPS yaw correction. Otherwise we get a large
sudden omega_I change on takeoff.
2012-05-21 12:15:06 +10:00
37f652e19b
AP_Common: fixed some duplicate product ID warnings
2012-05-17 23:37:32 +10:00
eaeaa3811a
ArduCopter: bug fix for reversing tri servo
...
Extended AP_MotorsTri class to take in pointer to rc_tail servo (rc_7) and we use this servo's REV parameter to determine whether to reverse the output to the tail servo or not
2012-05-13 12:36:46 +09:00
fe742f1c23
IMU: expose IMU_PRODUCT_ID as EEPROM Variable
...
this will allow us to log the Product ID in tlogs
2012-05-09 18:30:36 -07:00
c323a71933
AP_InertialSensor: Return product ID from sensor initialization
...
this exposes the product ID to the IMU Layer
2012-05-09 18:30:36 -07:00
a22b15adf1
PRODUCT: Define product IDs for all supported products
2012-05-09 18:30:36 -07:00
b824a87b90
MPU6000: Fixed Scaling on Accelerometers Rev C vs Rev D
...
Rev C have non standard scaling factor that is 1/2 of the data sheet
Rev D chips conform to the specification
2012-05-09 18:30:35 -07:00
46614e9acd
fixed typo ("minimum" should have been "maximum")
2012-05-06 15:50:19 -07:00
76a3fd9a4e
MPU6k: added suspend/resume on init
2012-05-01 12:06:54 +10:00
ae1702c20b
Baro: added suspend/resume on init
2012-05-01 12:06:54 +10:00
3115d48ba1
ADC: added suspend/resume on init
2012-05-01 12:06:54 +10:00
57ac39649a
TimerProcess: added suspend_timer()/resume_timer()
...
this will be used to avoid races in driver initialisation
2012-05-01 12:06:54 +10:00
3b2d203f0f
AP_AHRS: updated default AHRS_YAW_P to 0.2 (was 0.4)
...
This reduces the compass's default authority over the yaw direction by half
2012-04-30 17:29:45 +09:00
8f2cecae4d
MAVLink: re-generated with new pygen
...
this moves the enums to make them less order sensitive
2012-04-30 12:27:30 +10:00
292f9699fa
Parameters.pde/AP_MotorsHeli: Updated comments to leverage the new value aliases
2012-04-28 20:50:41 -05:00
3177f57d48
build: cope with Arduino 1.0 in command line build
...
this should autodetect 1.0 versus older builds
2012-04-27 15:38:42 +10:00
21886104a6
Parameters.pde/AP_MotorsHeli.cpp: Added comments from Roberts clone.
2012-04-26 18:26:14 -05:00
Andrew Tridgell
Jonathan Challinger
rmackay9
Jason Short
Amilcar Lucas
Wingspinner
Robert Lefebvre
Craig Elder
Chris Anderson
Adam M Rivera