Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
39,528 Commits 71 Branches 509 Tags 714 MiB
Commit Graph

47 Commits

Author SHA1 Message Date
bugobliterator cba98096e9 HAL_ChibiOS: move to using hardcoded heater PWM polarity in iofirmware 2019-07-25 17:05:41 +10:00
Andrew Tridgell 51e187342b HAL_ChibiOS: move the power control changes to be only CubeBlack 
This aims to fix #11455. I have been unable to reproduce the issue,
which leaves me thinking it is either a bootloader difference or a hw
difference between pixhawk1 clones and real pixhawk1 boards
 2019-06-09 16:56:14 +10:00
Andrew Tridgell 6333494d99 HAL_ChibiOS: disable peripheral power on boot on fmuv3 
then enable after 100ms, and let settle for 20ms. This is to fix an
issue with peripheral power on consistency with all fmuv3 boards

Thanks to Philip for the suggestion
 2019-05-11 18:45:18 +10:00
Andrew Tridgell 59652ad147 HAL_ChibiOS: added more IMU devices for Hex Cube boards 2019-03-11 12:40:21 +11:00
Michael du Breuil 3aee083540 AP_HAL_ChibiOS: Fix FMUv2 LED lighting up 2019-01-11 17:45:43 +11:00
Mark Whitehorn 86b7adf68f AP_HAL_Chibios: fix fmuv3/hwdef.dat printf/STDOUT description and clean up 2018-08-03 13:08:37 +10:00
Lucas De Marchi 20778f73f1 AP_HAL_ChibiOS: define HAL_HAVE_SAFETY_SWITCH accordingly 2018-08-02 13:15:02 -07:00
Andrew Tridgell 721f5d86b1 HAL_ChibiOS: fixed mRoX21 IMU setup 2018-07-12 12:33:32 +10:00
Randy Mackay af6c5ebda1 AP_HAL_ChibiOS: reduce default BRD_PWM_COUNT to 4 for fmv3 
also default relay pins to use aux out 5 and 6
 2018-07-10 05:30:05 +10:00
Andrew Tridgell d1caa86e12 HAL_ChibiOS: adjust DMA priorities for fmuv3 2018-06-06 07:15:41 +10:00
Michael du Breuil 3a62bca7d0 AP_HAL_ChibiOS: Make redefined pins an error, fix FMUv3 2018-05-25 09:57:18 +10:00
Andrew Tridgell 3749480dd8 HAL_ChibiOS: create ap_romfs_embedded.h 
use ROMFS keywork for romfs files
 2018-04-17 08:44:44 +10:00
Andrew Tridgell b4aeffbaed HAL_ChibiOS: added power status flags reporting 2018-04-09 15:32:04 +10:00
Andrew Tridgell 9b22e0b7cc HAL_ChibiOS: fixed SPI rates on fmuv3 
this fixes a SPI bandwidth issue on PH2.1 with 3 IMUs active
 2018-04-07 09:10:29 +10:00
Andrew Tridgell 67bae2669b HAL_ChibiOS: enable serial5 on fmuv3 2018-04-07 09:10:29 +10:00
Andrew Tridgell 93111dc0b1 HAL_ChibiOS: ensure that IO UART gets DMA 2018-04-07 09:10:29 +10:00
Andrew Tridgell 961a97a8c9 HAL_ChibiOS: expand docs on STDOUT_SERIAL 2018-03-02 21:46:23 +11:00
Andrew Tridgell 0cd6c9e5fb HAL_ChibiOS: added commented block on enable debug for builds 2018-03-02 21:39:38 +11:00
Andrew Tridgell 74ed19f460 HAL_ChibiOS: moved more board setup into hwdef.dat 2018-03-02 12:52:50 +11:00
Andrew Tridgell ebbd15ea17 HAL_ChibiOS: auto-enable CAN when pins are defined 2018-03-02 12:52:50 +11:00
Andrew Tridgell 11cfa5fd01 HAL_ChibiOS: correct LSM9DS0 bus IDs to match HAL_PX4 2018-02-19 15:49:32 +11:00
Andrew Tridgell 4d0c3b6581 HAL_ChibiOS: added pixartPC15 SPI device for SPI01 2018-02-14 18:27:00 +11:00
Andrew Tridgell 427e00dd41 HAL_ChibiOS: switched to system timer for AP_HAL::micros() 
this uses the ChibiOS system timer instead of a separate GPT timer for
the core ChibiOS timer. The advantage is it saves us a timer, plus it
changes ChibiOS to use a 1MHz clock on its timer, which gives us
higher resolution for delays.

This has a remarkable effect on timing jitter, reducing it greatly
 2018-02-14 18:27:00 +11:00
Andrew Tridgell f357eec78b HAL_ChibiOS: added more comments in hwdef.dat 2018-02-14 18:27:00 +11:00
Andrew Tridgell 9a95737d7d HAL_ChibiOS: added lots of comments to FMUv3 hwdef.dat 
this should help for developers of new boards
 2018-02-14 18:27:00 +11:00
Mark Whitehorn 6baad37e47 AP_HAL_ChibiOS: add ICM208060-am to SPI device table in fmuv3/hwdef.dat 2018-02-11 14:55:23 +11:00
Mark Whitehorn 3a40ba1d3e AP_HAL_ChibiOS: add buzzer support to hwdef.dat for fmuv3 2018-02-11 14:55:23 +11:00
Andrew Tridgell aae1cc22f4 HAL_ChibiOS: updated USB device strings 
use defaults or add in serial number
 2018-02-07 20:33:45 +11:00
Andrew Tridgell fa96e23552 HAL_ChibiOS: setup correct volt and current pins 
use hwdef.dat to specify battery pins
 2018-02-07 20:33:45 +11:00
Siddharth Purohit 6f21c1583f HAL_ChibiOS: add definitions to support uavcan in fmuv3 2018-02-07 20:33:45 +11:00
Andrew Tridgell a5bafb399f HAL_ChibiOS: adjust SPI pin speeds 2018-02-07 20:33:45 +11:00
Andrew Tridgell 7b251c9739 HAL_ChibiOS: lower FRAM CS speed to 2MHz 
this matches old firmware
 2018-01-20 17:40:07 +11:00
Andrew Tridgell 30fd2da108 HAL_ChibiOS: enable RTSCTS and SBUS_OUT 2018-01-20 17:40:07 +11:00
Andrew Tridgell 25f13ed518 HAL_Chibios: adjust MPU9250 clock speed down 
this helps with fast sampling enabled
 2018-01-20 17:40:07 +11:00
Andrew Tridgell dd59a5ff57 HAL_ChibiOS: adjust external bus clock for mpu9250 
this fixes an issue with fast sampling on the PH2.1 cube
 2018-01-20 17:40:07 +11:00
Andrew Tridgell e120e912f1 HAL_ChibiOS: moved board defines to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell cde930f5c8 HAL_ChibiOS: added skyviper-v2450 hwdef config 2018-01-15 11:46:02 +11:00
Andrew Tridgell 867e7ebf71 HAL_ChibiOS: auto-generate GPIO table from hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell fbe8166c71 HAL_ChibiOS: auto-generate AnalogIn pin table 2018-01-15 11:46:02 +11:00
Andrew Tridgell bae9469af7 HAL_ChibiOS: use a common makefile and board.c 
allow for custom files per board if supplied, but don't require them
for every board
 2018-01-15 11:46:02 +11:00
Andrew Tridgell c639708e22 HAL_ChibOS: auto-generate full PWM config 
use PWM markers in hwdef.dat to mark each PWM channel
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 48d2704cf4 HAL_ChibiOS: CS pins don't need to be a single SPI BUS 
its possible to use a CS pin on different buses, so they should not
have a particular bus tag
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 58796ff435 HAL_Chibios: moved SPI device tables to hwdef.dat 2018-01-15 11:46:02 +11:00
Andrew Tridgell d1f93cd66c HAL_Chibios: auto-generate I2C, SPI and UART device lists 
this is less error prone and make a port faster as more information is
in hwdef.dat
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 2646b9ef33 HAL_Chibios: matched debug port speed to NuttX 2018-01-15 11:46:02 +11:00
Andrew Tridgell c3435e45c5 HAL_ChibiOS: initial port to FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell 8b6bab7b17 HAL_Chibios: added ChibiOS HAL 
this is based on initial work by Sid, reset here for easier merging
 2018-01-15 11:46:02 +11:00