Andrew Tridgell
d50dcb5ad2
SITL: added SIM_TEMP_BFACTOR
...
for barometer temperature error
2017-05-03 20:12:04 +10:00
Andrew Tridgell
c1b6684b9f
SITL: added temperature control parameters
2017-05-03 20:12:04 +10:00
Andrew Tridgell
67404e9660
SITL: added SIM_ODOM_ENABLE
...
for enabling visual odomotry simulated data
2017-05-01 15:06:46 +10:00
Pierre Kancir
f8d6b5fc9c
AP_HAL_SITL: Allow to use a second type of gps for all type
2017-04-26 18:34:56 +01:00
Andrew Tridgell
1e69508322
SITL: added a vectored tilt tricopter quadplane
2017-04-24 16:54:41 +10:00
Niels Joubert
abd408bf40
SITL: Support both SBPv0 and SBPv2
2017-04-18 18:25:54 +01:00
Andrew Tridgell
92f060bdef
SITL: improved single-motor tailsitter plane
...
give larger control surfaces and take account of thrust airflow over
control surfaces
2017-04-17 14:23:15 +10:00
Andrew Tridgell
4de0daa7a1
SITL: make quaternion state available outside SITL
2017-04-16 14:01:36 +10:00
Andrew Tridgell
68e0b5b7fa
SITL: support XPlane-11
...
the packets are prefixed with DATA* instead of DATA@
This makes it work with both versions
2017-04-09 16:39:26 +10:00
Guilherme Sousa
204fcba8c1
SITL: Added SIM_ENGINE_FAIL to define failed motor
2017-03-29 22:39:51 +11:00
Pierre Kancir
1a374aa9f6
SIM_Gazebo: add a timeout to reset timestamp check
2017-03-18 19:58:11 +11:00
Pierre Kancir
29d35699f2
SITL: Gazebo, throw old paquet based on timestamp as we are using UDP
...
Add some comments
2017-03-18 19:58:11 +11:00
Pierre Kancir
d612209c19
SITL: Gazebo fix implicit cast
2017-03-18 19:58:11 +11:00
Pierre Kancir
ee7355a301
SITL: Reduce some variables scope and include
2017-03-18 19:58:11 +11:00
Pierre Kancir
8054405521
SITL: Change interface port to a generic solution for external simulator
2017-03-18 19:58:11 +11:00
Pierre Kancir
5b8c89225a
SITL: Make socket more verbose
2017-03-18 19:58:11 +11:00
Pierre Kancir
567a8d68e5
SITL: Make socket error more verbose
2017-03-18 19:58:11 +11:00
Pierre Kancir
8f2bdf51ea
SITL: gazebo add socket drain
2017-03-18 19:58:11 +11:00
Pierre Kancir
1bb4e3c9b7
AP_IRLock_SITL: make port variable
2017-03-18 19:58:11 +11:00
Pierre Kancir
63ea8c6f21
SITL: enable multi sitl for gazebo
2017-03-18 19:58:11 +11:00
CSe
491b545fab
SITL: fix gimbal connection on Windows
2017-03-17 00:43:21 +00:00
Randy Mackay
07ce7b8bd6
SITL: add GPS2_GLITCH parameter
2017-03-13 11:31:51 +11:00
jaxxzer
b98573d55f
SITL: Improved Sub simulation
...
-Constrain z axis movement between -100m (seafloor) and 0m (water
surface)
-More accurate thruster modelling
2017-03-07 09:35:41 +11:00
Rustom Jehangir
36f3cae535
SITL: Add support for Sub
2017-02-21 11:26:14 +11:00
Andrew Tridgell
d338d9c0aa
SITL: fixed whitespace on flightaxis code
2017-02-18 17:26:43 +11:00
Andrew Tridgell
3c8020862c
SITL: support a builtin tailsitter vehicle type
2017-02-18 17:26:43 +11:00
Andrew Tridgell
8bd1fc63d5
SITL: support pitch90 and pitch270 in FlightAxis
...
used for flying tailsitters
2017-02-18 17:26:43 +11:00
Michael du Breuil
ef0c51da42
SITL: Add GPS noise parameter
2017-02-13 09:23:14 +11:00
Andrew Tridgell
0171b64feb
SITL: setup simulator to match firefly6 AvA servo outputs
2017-02-06 16:18:58 +11:00
Andrew Tridgell
642e5aa5b7
SITL: match simulated tilt rate for CL84 to real vehicle
2017-01-25 19:01:15 +11:00
Peter Barker
8b38ce666d
SITL: SIM_XPlane: fix fabsf/abs warning; location alts are in integer cm
2017-01-17 09:41:37 -08:00
Andrew Tridgell
39ab1a0abc
SITL: adapt to new RC_Channel API
2017-01-12 17:39:37 +11:00
Pierre Kancir
c0be20ece2
SITL: XPLANE fix member shadowing
2017-01-09 06:51:48 -08:00
Andrew Tridgell
eaf5676636
SITL: fixed unselection bitmask bug in XPlane
2017-01-09 09:55:14 +11:00
Andrew Tridgell
35d6dc141a
SITL: only de-select data types in xplane once
...
don't fight the user
2017-01-07 14:41:23 +11:00
Pierre Kancir
bf135aeff7
SITL: Aircraft correct some syntax, implicit cast, make some local variable const, remove tabs and whitespace
2016-12-19 14:53:17 +00:00
Randy Mackay
3ed9eb98f3
SITL: minor comment fix for SIM_Multicopter
2016-12-19 17:01:04 +09:00
Andrew Tridgell
65c3d0e060
SITL: added ACC2_BIAS
2016-12-19 08:07:14 +11:00
Pierre Kancir
a5161edc97
SITL: remove duplicate
2016-12-05 10:59:45 -08:00
Peter Barker
20b86605fa
SITL: gripper closes faster, vary load carried by gripper
...
If gripper is closed on ground it is considered to be carrying
something
2016-12-02 12:04:05 +11:00
Peter Barker
b751f836bb
SITL: attach a string with a mass on the end to servo gripper
2016-12-02 12:04:05 +11:00
Peter Barker
f8918d15b1
SITL: add a hagl method to aircraft
2016-12-02 12:04:05 +11:00
Peter Barker
f1c23dc9be
SITL: remove argument to on_ground
...
This was always the current position
2016-12-02 12:04:05 +11:00
Peter Barker
e24f3f9419
SITL: correct on-ground correction
...
Using the cached ground_height_difference may mean
you end up at the wrong height if you were near
the edge of an SRTM square and had high horizontal
velocity
2016-12-02 12:04:05 +11:00
Andrew Tridgell
42435e700b
SITL: expose height above ground to all models
2016-11-28 08:26:56 +11:00
Tom Pittenger
11229d2588
SITL: fix whitespace
2016-11-18 10:42:10 -08:00
ori ganoni
631b5c3ebc
adding turbulance to SITL
2016-11-17 20:06:35 -08:00
Lucas De Marchi
f6d475c1e6
AP_HAL_SITL: add O_CLOEXEC in places missing it
...
By opening with O_CLOEXEC we make sure we don't leak the file descriptor
when we are exec'ing or calling out subprograms. Right now we currently
don't do it so there's no harm, but it's good practice in Linux to have
it.
2016-11-07 12:37:30 -03:00
Peter Barker
d9cbcd9487
SITL: a simulator for the EPM grabber
2016-11-05 10:20:43 +09:00
Peter Barker
d439bbe5bf
SITL: SIM_Gripper_Servo, a simulated servo gripper
2016-11-05 10:20:29 +09:00
murata
c808ee2f49
Global: To nullptr from NULL.
...
RC_Channel: To nullptr from NULL.
AC_Fence: To nullptr from NULL.
AC_Avoidance: To nullptr from NULL.
AC_PrecLand: To nullptr from NULL.
DataFlash: To nullptr from NULL.
SITL: To nullptr from NULL.
GCS_MAVLink: To nullptr from NULL.
DataFlash: To nullptr from NULL.
AP_Compass: To nullptr from NULL.
Global: To nullptr from NULL.
Global: To nullptr from NULL.
2016-11-02 16:04:47 -02:00
Peter Barker
1997a4e044
SITL: include mass of sprayer payload in vehicle mass
2016-10-29 15:02:56 +09:00
Peter Barker
a7867603a0
SITL: SIM_Sprayer: a simulated sprayer
2016-10-29 15:02:48 +09:00
priseborough
d830f68901
SITL: Add angular acceleration to simulator states
...
The calculation used is an approximation to work around the lack of angular acceleration in the interface with the flight dynamics model.
2016-10-27 14:54:44 +11:00
priseborough
27dab27565
SITL: Add parameters for sensor position offsets in body frame
2016-10-27 14:54:44 +11:00
Andrew Tridgell
5e03358b0b
SITL: added servo filtering
...
SIM_SERVO_SPEED is servo time constant in seconds
2016-10-25 20:39:38 +11:00
Mathieu OTHACEHE
152edf7189
Global: remove mode line from headers
...
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Peter Barker
6f200cdc3d
SITL: SIM_Rover: remove unused variables
2016-10-24 08:57:55 -02:00
Peter Barker
d3422d1653
SITL: SIM_Tracker: remove unused variable
2016-10-24 08:57:55 -02:00
Georacer
54c1efe5e1
Connection to last_letter once again successful
2016-10-17 09:37:23 +11:00
John Hsu
fc13efa673
SITL: update SIM_Gazebo SITL interface servo packet to have 16 floats, matching sitl_input struct.
2016-10-13 12:03:20 +11:00
Gustavo Jose de Sousa
06c3102701
SITL: SIM_Calibration: bring angular velocity controller back
...
And fix header documentation.
2016-10-11 12:58:37 +11:00
Murilo Belluzzo
0b86532b5c
Global: Remove '\r' character from all source code files
2016-10-03 22:13:27 -03:00
Michael Oborne
11c376588d
AP_GPS_NOVA: support tersus/novatel/comnav gps
2016-09-20 10:53:49 +10:00
Andrew Tridgell
c275e7c61d
SITL: added SIM_SPEEDUP parameter
...
allows changing speed of simulation while running
2016-09-19 07:45:24 +10:00
Andrew Tridgell
52caf8419e
SITL: fixed sense of wind direction
...
wind direction is where wind is coming from, not going to
2016-09-16 10:59:27 +10:00
Andrew Tridgell
8f35305496
SITL: added a simpler compass cal simulation
...
just output 1250 to servo5 and it will go through lots of rotations
2016-09-16 08:59:43 +10:00
Andrew Tridgell
3aba0d8359
SITL: fixed rover altitude
...
thanks to Grant for noticing this
2016-08-24 13:29:45 +10:00
Andrew Tridgell
49b82b767f
SITL: added RPM for heli sim
2016-08-23 09:30:14 +10:00
Andrew Tridgell
3ecf2850a8
SITL: fixed send of MAVLink2 pkt
2016-08-16 16:33:36 -07:00
Tom Pittenger
19ac9bce48
SITL: add Ping2020 simulated device
2016-08-16 16:33:36 -07:00
Andrew Tridgell
622d26b122
SITL: expand to 16 output channels
...
needed for IC engine testing with octaquadplane
2016-07-25 15:45:39 +10:00
Andrew Tridgell
e73d43d4f9
SITL: improve ICEngine simulation
2016-07-25 10:06:02 +10:00
Andrew Tridgell
995fb7cd86
SITL: added IC engine simulation
2016-07-25 10:06:02 +10:00
Andrew Tridgell
4301faeac9
SITL: map X-Plane Mixture inputs to channels 6 and 7
...
this gives two user controllable channels for experimental aircraft
2016-07-22 19:14:46 +10:00
Andrew Tridgell
69da7e9f86
SITL: added elevrev option for plane sim
...
used by autotest
2016-07-22 16:42:23 +10:00
Andrew Tridgell
f075fcd79f
SITL: added SIM_PIN_MASK
...
for simulation of GPIO pins
2016-07-22 15:01:20 +10:00
Tom Pittenger
44a60f278a
SITL: change default of SIM_ADSB_RADIUS from 1E3 to 10E3
2016-07-21 00:04:20 -07:00
Andrew Tridgell
a1c759e491
SITL: added sensor smoothing
...
this adds smoothing of sensors for kinematic consistency when
interacting with the ground. It means when we land the EKF doesn't go
crazy
2016-07-19 21:38:16 +10:00
Andrew Tridgell
4faa57074a
SITL: removed vehicle specific ground handling
2016-07-19 14:47:47 +10:00
Andrew Tridgell
e7a54c83d1
SITL: allow SITL to use terrain data for ground height
2016-07-19 14:42:31 +10:00
Tom Pittenger
acaf0c6a5d
SITL: LPF the SIM_WIND_DIR and SIM_WIND_SPD values to eliminate step inputs
2016-07-15 18:37:40 -07:00
Andrew Tridgell
4e8b4f29d9
SITL: added -heavy option to fixed wing model
2016-07-16 08:14:29 +10:00
Andrew Tridgell
f3f34be9c4
SITL: added comment on heli interlock
2016-07-12 20:50:22 +10:00
Andrew Tridgell
4f17093add
SITL: give a bit more pitch on tail in XPlane heli
2016-07-12 19:08:50 +10:00
Andrew Tridgell
fdd20830d6
SITL: use flaps for collective on helis in X-Plane 10
...
works for more helis
2016-07-12 19:08:50 +10:00
Andrew Tridgell
871219d199
SITL: support helicopters with X-Plane 10
...
we get collective from "throttle2" and get interlock from generator1 on/off
2016-07-12 14:40:08 +10:00
Andrew Tridgell
0be442d34b
SITL: improved throttle input in XPlane
...
reduce chance that throttle output will be interpreted as input
2016-07-05 09:48:40 +10:00
Andrew Tridgell
f387f248d3
SITL: added support for servo slew rates and retract servos
...
this is for tiltrotors with retract servos
2016-07-05 09:40:37 +10:00
Andrew Tridgell
82f131667d
SITL: added flaps control in XPlane
2016-06-30 20:26:00 +10:00
Andrew Tridgell
a6e927d434
SITL: default gyro cal off in XPlane and FlightAxis
...
pointless doing cal on these backends
2016-06-24 10:32:52 +10:00
Andrew Tridgell
569443231a
SITL: improved altitude data in XPlane
2016-06-20 12:52:13 +10:00
Andrew Tridgell
51fff00871
SITL: report data and frame rates in XPlane
...
and avoid time going backwards if possible
2016-06-20 12:52:13 +10:00
Andrew Tridgell
b7395ee74b
SITL: fixed sign of magnetic inclination
2016-06-20 11:17:36 +10:00
Andrew Tridgell
5b7b799046
SITL: fixed mag field in JSBSim and last_letter
2016-06-20 11:07:51 +10:00
Andrew Tridgell
16595d2f3b
SITL: auto-set AHRS_EKF_TYPE to 10 for XPlane and FlightAxis
2016-06-20 08:38:53 +10:00
Andrew Tridgell
2f88c24f49
SITL: added debug showing UDP ports for XPlane
2016-06-19 21:18:19 +10:00
Andrew Tridgell
ec5534bd6a
SITL: explain the throttle_magic code for XPlane
2016-06-19 21:10:49 +10:00
Andrew Tridgell
f76a7e64ca
SITL: auto-select correct data fields from X-Plane10
2016-06-19 20:57:34 +10:00
Andrew Tridgell
4f99c17aae
SITL: added X-Plane 10 SITL backend
2016-06-19 13:59:15 +10:00