Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
36,047 Commits 71 Branches 509 Tags 814 MiB
Commit Graph

191 Commits

Author SHA1 Message Date
Michael Oborne a71ed6c5ce enable mavlink10 by default 2012-06-04 08:02:08 +08:00
Andrew Tridgell f43f5900bc Telemetry: make it possible to use UART2 on APM2 
building with TELEMETRY_UART2=ENABLED allows you to use the solder
bridge on the APM2 to enable telemetry on UART2. This allows both USB
telemetry and a radio at the same time.
 2012-05-04 10:39:44 +10:00
Andrew Tridgell 8fab91e063 APM-nav: set NAV I value defaults to 0.1 
a small I value is good on most planes, so I think this is a better
default than 0. Thanks to Chris for asking about this.
 2012-04-30 12:27:30 +10:00
James Goppert 0e7e77760a Updated ArduPlane/ArduCopter cmake options. 2012-04-18 15:16:02 -04:00
Andrew Tridgell 86cc7a5e1d APM: enable AP_Declination by default 2012-03-30 14:25:27 +11:00
Andrew Tridgell 168c45ab12 AP_Declination: enabled auto declination by default in APM 2012-03-30 14:25:27 +11:00
Amilcar Lucas 6e9ffb4249 correct small typos in comments 2012-03-11 21:30:09 +01:00
Adam M Rivera 2524f9c8df AP_Declination: Added new config value to allow the user to have the declination overwritten on every 3D fix. 
Signed-off-by: Andrew Tridgell <tridge@samba.org>
 2012-03-11 20:59:47 +11:00
Andrew Tridgell 9a06d35772 make 'ENABLE' and 'ENABLED' mean the same things 
users get this wrong far too often!
 2012-03-10 10:34:33 +11:00
Andrew Tridgell e39c3cb9d2 APM: make it possible to build ArduPlane with quaternion support 2012-03-10 10:34:29 +11:00
Andrew Tridgell 35badbb97d APM: the CLI fits nicely on the 1280 again now 
I find the CLI very useful for testing, so enable it by default on the
1280. Logging is still off by default.
 2012-02-14 08:33:49 +11:00
Doug Weibel 4b24d865bf Stashing some battery monitoring ratio values in the comments for future use. 2012-01-15 16:35:46 -07:00
Doug Weibel 6e8ac99ed6 Fix airspeed sensor support for APM2. 
Airspeed sensor should be attached to Analog input 0
 2012-01-15 16:12:08 -07:00
Doug Weibel 69c7598db2 Update battery monitoring code for ArduPlane 
Fixes compatibility for APM2.  Also a significant update to the battery monitoring code:  We previously had monitoring modes for individual cell voltages for 3 and 4 cell lipos.  These have been removed as they were never really supported (the cell voltages were computed but were not reported or recorded anywhere).  Also, some clean-up/prep work was done for supporting monitoring 2 separate battery packs.  The CLI battery and current monitoring tests were consolidated into 1 test.
 2012-01-15 16:10:28 -07:00
Michael Oborne e1a544cc78 fix relay on apm 1 AP 2012-01-05 07:51:01 +08:00
Andrew Tridgell d0245b206a APM2: default magnetometer to enabled 
all APM2s have a MAG at the moment

thanks to Chris for the suggestion
 2011-12-22 17:51:14 +11:00
Andrew Tridgell e99db6526f APM: added RST_SWITCH_CH parameter 
This is useful for switching back to the mode indicated by the control
switch after a failsafe or fence breach. I was just changing modes
each time, but it is far more elegant to have a spring loaded switch
for "I am ready to take control again", rather than continually
changing modes.
 2011-12-19 11:25:59 +11:00
Andrew Tridgell df094ce463 fixed airspeed sensor for ArduPlane on APM2 
we were trying to use a non-existant ADC chip!
 2011-12-17 07:29:09 +11:00
Andrew Tridgell b9a88aac32 geofence: added FENCE_TRIGGERED_PIN 
this allows for a digital pin to be set high when the geofence
triggers. This pin can be connected to an external failsafe device
 2011-12-17 07:29:08 +11:00
Michael Oborne 28d280562a apm 1280 disables 2011-12-16 22:26:39 +08:00
Andrew Tridgell 82b615df50 geofence: added geo-fencing control parameters 2011-12-16 20:11:51 +11:00
Pat Hickey d7f77aec93 ArduCopter & ArduPlane: Added support for apm2beta build via APM2_BETA_HARDWARE define 
* This enables the BMA085 driver for compatibility with beta boards.
* The CLI_SLIDER_ENABLED=DISABLED line does not need to be in the makefile.
  config.h takes care of this default.
 2011-12-11 15:21:09 -08:00
Pat Hickey 1b2ebdff44 ArduPlane: added config.h and defines.h to support CONFIG_BARO 2011-12-11 15:21:09 -08:00
Doug Weibel 2ef4c79a7c Minimum ground speed patch from Claudio Natoli. Thanks Claudio! 
This patch will boost the target airspeed as necessary to keep the ground speed above a parameter value - param_min_groundspeed.  Airspeed is still limited to FBW-max.  Setting min_groundspeed to zero (default) disables the feature.
 2011-12-09 16:43:25 -07:00
Andrew Tridgell 86927ac0a5 ArduPlane: rename purple to APM2 2011-11-25 20:00:19 -08:00
Andrew Tridgell 7def0e98e8 USB-MUX: auto-switch telemetry port based on UXB mux for ArduPlane 
when USB is unplugged, switch baud rate to the SERIAL3_BAUD rate from
EEPROM
 2011-11-25 20:00:19 -08:00
Andrew Tridgell 6093db948b compass: added AP_COMPASS_APM2_SHIELD 
this makes the orientation clearer
 2011-11-25 20:00:18 -08:00
Andrew Tridgell 40459653b5 purple: fixed LED and IO pin defintitions 2011-11-25 20:00:18 -08:00
Andrew Tridgell ca76f6d0ec purple: add the remaining hw defines for purple hardware 2011-11-25 20:00:18 -08:00
Pat Hickey 08675a91d8 purple: added config options for purple/APM1 hardware 2011-11-25 20:00:17 -08:00
Amilcar Lucas ab730ff919 Added camera and/or antenna mount support. 
It is fully configurable with the mission planner, there is no need to change
the source code to adapt to your setup.
It needs more testing, but the SIL is not working for me.
 2011-10-31 22:55:58 +01:00
Andrew Tridgell 5a44298d57 CLI: enable "hit enter 3 times" support for CLI 
if you hit enter 3 times before you send any mavlink packets, we will
enter CLI mode
 2011-10-27 21:54:07 +11:00
Doug Weibel 9cbc38b516 Add a feature for a minimum altitude parameter while flying in FBW-B 
This patch written by YureZzZ - Thank you!
 2011-10-16 23:11:40 -06:00
Michael Oborne 7ef51f723d Sensor hil fix's 2011-10-13 22:22:03 +08:00
Andrew Tridgell e2ed1f1c56 removed some more unused defines 
mavlink is now the only choice for HIL and GCS
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 4437ff1046 get rid of the last active uses of the SendDebug macros 
please use gcs_send_text*() from now on, to ensure serial queueing
 2011-09-19 11:04:02 +10:00
Andrew Tridgell 9baab490f1 HIL: first step in simplifying the HIL/GCS code 
this gets rid of the messy #ifdefs around HIL_PORT, and removes
non-MAVLink GCS and HIL support
 2011-09-19 11:04:01 +10:00
Doug Weibel 119d006e03 Change default setting for auto_trim to disabled per user (JB) request. 2011-09-12 07:24:52 -06:00
Amilcar Lucas b7a0d8836a This is the real HEAD of the APM_Camera branch. Seams that lots of changes got lost in the SVN to GIT port 2011-09-09 16:18:38 +02:00
Andrew Tridgell 609ae8359d import APM_Camera branch from SVN 2011-09-09 11:45:13 +10:00
Andrew Tridgell e0dc1271d6 imported ArduPlane from ArduPilotMega svn 2011-09-09 11:29:39 +10:00