Commit Graph

311 Commits

Author SHA1 Message Date
Peter Barker 14b2af84ab autotest: break out a home_relative_loc_ne for getting a home-rel loc 2021-06-11 16:59:51 +10:00
Peter Barker fd792bebf8 autotest: wipe SITL state after temperature cal test
ArduPilot internals are fiddling state that the autotest suite is
unaware of, so wipe the eeprom after the test
2021-06-09 14:14:06 +10:00
Peter Barker 6944ef6af1 autotest: fly each working Helicopter frame 2021-06-09 12:15:42 +10:00
James O'Shannessy bc38d8a78c AutoTest: Fix autotest from failing due to state from earlier test
Autotest was failing because there was an expectation that the plane would fly relatively north from the takeoff point.
This assumption may not be true. We work around it by using a tin can instead of an exclusion polygon so that we breach no matter the direction we fly.
2021-05-05 10:59:10 +10:00
James O'Shannessy 0e656c1504 AutoTest: Ensure Plane uses home as Fence Return Point if one is not present and no exclusion fence is present 2021-05-05 10:59:10 +10:00
Iampete1 aa72b7da46 Tools: autotest: Plane: add loiter terrain following test 2021-05-02 18:51:27 +10:00
Peter Barker 0ee0228883 autotest: fix flapping fly-home-land-and-disarm
One of the tests just happened to be within acceptance radius of
waypoint 8 - so when we set that as a waypoint we never saw it actually
be our waypoint so the set_waypoint failed
2021-04-20 23:04:24 +10:00
Peter Barker fff4aa8bde autotest: increase allowed time for climb_before_turn to get home 2021-04-01 19:11:31 +11:00
Peter Barker 30ebe6cde9 autotest: augment test DO_AUX_FUNCTIION test for FAILED AND DENIED 2021-03-31 11:36:09 +11:00
Peter Barker b55094fef4 autotest: Test triggering Auxillary Functions via mavlink 2021-03-31 11:36:09 +11:00
Peter Barker 462ac255a3 autotest: start MAVProxy only as needed for testing 2021-03-19 09:46:45 +11:00
Stavros Korokithakis f6fc6d22da autotest: Fix the climb-before-turn test 2021-03-18 07:37:21 +11:00
Peter Barker 0c7f3d20a4 autotest: fix attitude test
autotest: add a get_messages_frame method

Attempts to get a set of messages as close as reasonable in time.
2021-03-16 14:19:44 +11:00
Stavros Korokithakis 29043d62e9 Add FLIGHT_OPTION to climb before RTL 2021-03-16 11:58:47 +11:00
Hwurzburg d15e01d390 Plane: fix DO_CHANGE_SPEED airspeed to impact only AUTO and GUIDED modes 2021-03-16 10:09:34 +11:00
Peter Barker eb702b0f82 Tools: add support for ATTITUDE_QUATERNION 2021-03-13 09:44:12 +11:00
Peter Barker f78d7c3b25 autotest: add option to not check current wp after set_current_wp
Sometimes a waypoint is set which we'll never emit as our current
waypoint (e.g. a JUMP)
2021-03-10 09:12:39 +11:00
Peter Barker 4a251bebbd autotest: fix fly_home_land_and_disarm; wp 7 is never current wp
This is never a current waypoint, so we can't wait for it
2021-03-10 09:12:39 +11:00
Peter Barker bdeadce95b autotest: improve deadreckoning test
autotest: use location_offset rather than coordinates in Deadreckoning test
2021-03-05 21:34:58 +11:00
Peter Barker 425ab1358a autotest: tidy streamrate handling
Stop setting MAVProxy stream rates; these are neither here-nor-there now as MAVProxy will only modify its own connection's streamrates now

Stop doing the set-streamrate dance to work around MAVProxy's
set_streamrate algorithms.

Remove useless and misleading set of streamrate in Plane test; we reset
streamrates on the reboot immediately following this set.  Considering
the streamrate was never eset this was a good thing.
2021-03-05 21:34:58 +11:00
James O'Shannessy bcc0da9c47 AutoTest: Adds additional autotests to capture mode change while breached
AutoTest: Adds test for fence breach switching to guided mode when no fence return point is present. In upstream, this results in a vehicle fly-away.
2021-03-05 14:52:46 +11:00
James O'Shannessy dac5996d93 AutoTest: Fix autotest conflicts after rebase on upstream 2021-03-05 14:52:46 +11:00
James O'Shannessy fa7be629e5 AutoTest: Make fence tests flake8 compliant 2021-03-05 14:52:46 +11:00
James O'Shannessy 2353b55452 AutoTest: Address race conditions in changes to fence tests 2021-03-05 14:52:46 +11:00
James O'Shannessy 76a2a76b54 AutotTest: Adds autotests for Plane to test RetRally flag added to AC_Fence 2021-03-05 14:52:46 +11:00
James O'Shannessy 8545715837 AutoTest: Add Static Fence Tests for unallowed arming when breaching geofence 2021-03-05 14:52:46 +11:00
James O'Shannessy 6f7ba3b037 AutoTest: Ensure fence is disabled at end of throttle_failsafe_fence test 2021-03-05 14:52:46 +11:00
James O'Shannessy bbd606b8b5 AutoTest: Corrections to autotests 2021-03-05 14:52:46 +11:00
James O'Shannessy 47e76a1807 AutoTest: Move fence enable/disable to common location 2021-03-05 14:52:46 +11:00
James O'Shannessy 215901be30 Autotest: Correct the logic for fence based autotest functions
Adds corrections to enabling fence using aux function.
Correctly test fences statically. Only uploaded fences can be checked using a fence file, so we check those first. Then we add steps to check tin can, max and minm all set the fence as present, as expected.
Plane will support MAV_PROTOCOL_CAPABILITY_MISSION_FENCE, so we assert that it does support it.
To test ceiling and floor, leverage some existing functions for takeoff, change altitude and land. Check for respective breach.
Add a floor breach check to copter.
2021-03-05 14:52:46 +11:00
James O'Shannessy 1a3e168ced Autotest: Fence is present, but test looking for not present
Autotest: Remove ties to mavlink FENCE_ACTION

Autotest: Add ArduPlane autotest to test ceiling and floor

Adds a test to ensure the vehicle reverts to RTL when breaching a ceiling or floor.

Autotest: Progress the test once we reach takeoff complete and fence enable

Autotest: Use RC_OPTION for Aux Switch functionality

Autotest: Enable fence last
2021-03-05 14:52:46 +11:00
Peter Barker a235246628 autotest: correct units in new AHRS2 test 2021-03-03 18:41:14 +11:00
Peter Barker b3ee5d5f59 autotest: increase verbosity in AHRS2 test 2021-03-03 16:29:33 +11:00
Peter Barker 317181922c autotest: ensure we're getting vaguely sane data in AHRS2 message 2021-03-02 20:48:36 +11:00
Peter Barker cc83562add autotest: tidy fence handling 2021-03-02 16:54:06 +11:00
Peter Barker 10007e2e42 autotest: load missions natively rather than using MAVProxy 2021-03-02 14:24:36 +11:00
Peter Barker 9120882e9e autotest: print name of open dataflash log when test exception caught
The stack trace is already extremely useful... but mapping back to the
relevant dataflash log is a bit of a pain.

Adding more stuff to this method in the future might be good, too.
2021-02-21 21:35:35 +11:00
Peter Barker d4aef2dba8 autotest: stop using MAVProxy to change mode 2021-02-20 00:03:24 +11:00
Peter Barker c13d229877 autotest: use self.set_current_waypoint rather than "wp set" to set current wp 2021-02-19 12:25:40 +11:00
Peter Barker dcc04ccd09 autotest: stop using MAVProxy to change modes 2021-02-18 17:38:52 +11:00
Peter Barker 628a3843b2 autotest: flake8 compliance for arduplane.py 2021-02-18 10:43:05 +11:00
Peter Barker a292fe1b8b autotest: use wait_statustext rather than mavproxy.expect
This is important when running under Valgrind as the text can be
significantly delayed.  wait_statustext times out in simulation time,
whereas mavproxy.expect has a flat 60s timeout
2021-02-17 18:16:04 +11:00
Peter Barker c00a82868e autotest: make DLVR sole airspeed sensor in test
The test wasn't actually *using* the DLVR...
2021-02-17 14:23:07 +11:00
Peter Barker ca49f62b6d autotest: add test for Plane's RTL_CLIMB_MIN parameter 2021-02-13 19:34:52 +11:00
Peter Barker d60fa86026 autotest: use set_map_from_rc more 2021-02-13 19:34:52 +11:00
Andrew Tridgell 3add045924 autotest: fixed accel/gyro threshold consistency for tempcal 2021-01-21 13:09:21 +11:00
Andrew Tridgell fe7d933976 autotest: use delay_sim_time() in tempcal test 2021-01-21 13:09:21 +11:00
Andrew Tridgell 58b9cd2c6e autotest: added assert_reach_imu_temperature() abstraction 2021-01-21 13:09:21 +11:00
Andrew Tridgell 4c315b57ca autotest: run gyro/accel cal at non-reference temperature 2021-01-21 13:09:21 +11:00
Andrew Tridgell 2cf7e7945c autotest: make tempcal debug output clearer 2021-01-21 13:09:21 +11:00
Andrew Tridgell 84dda13b42 autotest: use new learn param setup 2021-01-21 13:09:21 +11:00
Andrew Tridgell 30385fb8cb autotest: use set_parameters() in IMU temp cal test 2021-01-21 13:09:21 +11:00
Andrew Tridgell 327db46c15 autotest: added automatic testing of IMU Temperature calibration 2021-01-21 13:09:21 +11:00
Andrew Tridgell c396d15890 Revert "autotest: ensure defaults files don't set already-default-values"
This reverts commit 3d431cd4f1.

It breaks MissionPlanner SITL. We can re-apply once MissionPlanner
copes with external_model.
2021-01-20 08:54:43 +11:00
Peter Barker 3d431cd4f1 autotest: ensure defaults files don't set already-default-values
autotest: mark some vehicles as having external physics models

autotest: add default_params_filename to some vehicle info
2021-01-19 10:34:00 +11:00
Peter Barker 6becd90df0 autotest: increase timeout on DO_CHANGE_SPEED test 2021-01-18 19:08:46 +11:00
Peter Barker 5848ff7512 autotest: eliminate race condition in plane fence static test 2021-01-18 16:32:21 +11:00
Peter Barker 6865649b9b autotest: tidy and correct ekf lane switching test 2021-01-18 15:19:39 +11:00
Peter Barker 48a38f3ee2 autotest: wait for GPS fix before installing position validation handling 2021-01-18 15:11:19 +11:00
Peter Barker cd8a393ac2 autotest: create own RC thread to handle setting of RC overrides
autotest: prevent method-on-undef problem in case of early test failure

autotest: plumb MAVProxy rc input back in for switch test

autotest: close off rc thread in case of timeout
2021-01-15 20:56:30 +11:00
Peter Barker 47aea5f44c autotest: print stack traces for caught exceptions 2021-01-13 19:46:13 +11:00
Andrew Tridgell b5476c6e5c autotest: added ExternalAHRS test 2021-01-05 21:13:12 +11:00
Peter Barker 2b06ae9aa0 autotest: create and use a wait_sensor_state method 2020-12-31 17:42:33 +11:00
Peter Barker 26bbedd777 autotest: remove un-needed parameter wipe after soaring test 2020-12-25 12:18:01 +11:00
Peter Barker 69ef0937f4 autotest: add trivial test just to cover the Airspeed_DLVR code 2020-12-22 23:07:24 +11:00
Pierre Kancir 871b9fc12d Tools: plane : initial_mode_switch_mode 2020-12-16 17:27:07 +09:00
Andrew Tridgell 5fc68a1ce5 autotest: adjust for new baro SITL param names 2020-12-11 15:21:41 +11:00
Peter Barker 813723d0b7 autotest: add test for needing AHRS to be healthy to arm 2020-12-11 09:55:40 +11:00
Tom Pittenger 58c7f8279d Tools/autotest: fix CI by updating new ADSB_ENABLE->ADSB_TYPE param name 2020-11-30 16:05:17 +11:00
Peter Barker 18330d16de autotest: add test for MAVlite 2020-10-27 10:17:53 +11:00
Peter Barker 49fd762f26 autotest: fix and re-enable button test
A recent commit to fix the setting-of-pullup-resistors in SITL makes it
possible to re-enable this.

Closes #15259
2020-10-15 08:34:08 +11:00
Samuel Tabor bd28a62155 autotest: Update soaring test for THERMAL mode. 2020-09-25 16:21:15 +10:00
Samuel Tabor fe6c4d9290 autotest: Update for THERMAL mode. 2020-09-24 07:30:48 +10:00
Harshit Kumar Sankhla f0c237d88e autotest: bug fixes for ekf lane switch test 2020-09-11 10:16:20 +10:00
Samuel Tabor 6de4967a3d autotest: Fix typos and unclear comments in soaring test. 2020-09-10 22:21:41 +10:00
Samuel Tabor f6017d60bf autotest: Update for new soaring behaviour. 2020-09-10 22:21:41 +10:00
Peter Barker 51b54d3740 autotest: avoid leaving message hooks around
Can lead to some very weird and confusing output
2020-09-09 17:59:17 +10:00
Peter Barker 9228f47dc9 autotest: create collections-on-context to record selected messages 2020-09-08 14:19:08 +10:00
Peter Barker f3866e5f39 autotest: disable button test 2020-09-08 12:31:15 +10:00
Peter Barker 522c3e6281 autotest: make LogUpload the last test again
ATM any logs produced by EKFLaneswitch won't get uploaded in case of
failure
2020-09-01 18:15:37 +10:00
Harshit Kumar Sankhla 464c90a03c Tools: add an EKF3 lane switching test to plane 2020-08-27 20:20:51 +10:00
Peter Barker 67b71e2b94 autotest: add test for Plane dead-reckoning support 2020-08-21 18:16:40 +10:00
Samuel Tabor d57b7cad63 autotest: Update soaring test to use RCX_OPTION. 2020-07-21 09:38:04 +10:00
Samuel Tabor ed14ab84ce autotest: Add test for terrain following mission. 2020-07-07 11:46:32 +10:00
Samuel Tabor c3f039a739 autotest: Add timeout to fly_mission. 2020-07-07 11:46:32 +10:00
Peter Barker 4e216f976f autotest: assert that Plane doesn't support fence-via-mission-item-protocol
Hopefully this starts to fail at some stage!
2020-06-02 19:00:32 +10:00
Peter Barker b0916231b2 autotest: add tests for log download 2020-05-26 19:32:49 +10:00
Samuel Tabor 913e5a23fe autotest: Add method to get default params for model. 2020-04-22 10:01:09 +10:00
Peter Barker e63e5ba130 autotest: correct path to defaults file when customising SITL cmdline 2020-04-19 11:09:16 +10:00
Samuel Tabor e30f0a9173 autotest: Move soaring test into plane. 2020-04-19 11:09:16 +10:00
Peter Barker 899b98b2f9 Plane: add test for loading/restoring large missions 2020-04-15 16:24:40 +10:00
Peter Barker 10e8f3f3d7 autotest: canonicalise on defaults_filepath rather than defaults_file
This naming better represents the fact this isn't just a filename.
2020-04-14 15:09:17 +10:00
Pierre Kancir 07435cc541 Tools: correct path for soaring mission 2020-04-09 09:01:03 +10:00
Pierre Kancir bcd15bc6e4 Tools: update path for plane test missions files 2020-04-09 09:01:03 +10:00
Samuel Tabor a4c5e12fac Tools: Make soaring test a subclass of plane test. 2020-04-08 09:11:54 +10:00
Pierre Kancir 56298aabda Tools: update arduplane.py wait function parameters 2020-03-27 22:13:52 +11:00
Peter Barker 403950f61f autotest: add autotests for CPU failsafe 2020-03-20 12:19:21 +11:00
Peter Barker 92d2186b95 autotest: don't use self.mav.motors_disarmed_wait as it blocks forever 2020-03-17 16:31:29 +11:00
Peter Barker b0aceaea70 autotest: add tests for LTM telemetry output 2020-02-08 10:38:34 +11:00
Peter Barker 71a129d685 autotest: add test for Plane LOITER 2020-02-07 15:02:35 +11:00