Commit Graph

1845 Commits

Author SHA1 Message Date
Tom Pittenger 37336bbbe1 Plane: moved is_flying related code to its own file 2015-08-23 10:34:19 +10:00
Tom Pittenger 204ff7b158 Plane: move statics into new struct
removed default case statements
2015-08-23 10:34:18 +10:00
Tom Pittenger 6d0ad05192 GCS_Mavlink: added is_crashed to mavlink heartbeat status which shows EMERGENCY 2015-08-23 10:34:18 +10:00
Tom Pittenger da8f4f9e95 Plane: reworked is_flying
add crash detection, allow disengage via param CRASH_DETECT
improved is_flying behavior
take off, landing and hard-landing improvements
add stillness check to is_flying and log it
minimum airspeed is determined ARSPD_FBW_MIN*0.75
2015-08-23 10:34:18 +10:00
squilter d421644f3a Plane: define and send FIRMWARE_VERSION 2015-08-23 09:21:57 +09:00
Michael Day f20beecb0b Plane: Climb/descent "intent" param with CONTINUE_AND_CHANGE_ALT
Param 1 of CONTINUE_AND_CHANGE_ALT now denotes which direction the
user expects the plane to travel when changing altitude:

0 = no expectation, command completes when within 5 m of altitude.
1 = climb expected, command completes at or above altitude.
2 = descent expected, command completes at or below altitude.
2015-08-20 11:37:17 +10:00
Andrew Tridgell f66174a1ce Plane: improved 3.4.0 release notes 2015-08-20 11:30:28 +10:00
Andrew Tridgell 0c833b76b7 Plane: update release notes for 3.4.0beta1 2015-08-20 11:11:28 +10:00
Andrew Tridgell b1f810fbb9 Plane: prepare plane 3.4.0beta1 release 2015-08-20 10:53:48 +10:00
Tom Pittenger 86e3116fb6 Plane: implement try send mission_item_reached
clean up unreachable code
2015-08-19 15:42:07 +10:00
Tom Pittenger f1eb2f88df Plane: post "Distance from LAND point" on every land
- waits until disarm after a land
2015-08-18 17:20:20 +10:00
Stewart Loving-Gibbard eb2ca91f1c Plane: Fixing unambiguous spelling errors in Parameters.cpp file.
These are user-visible in Mission Planner and the like.
2015-08-18 17:16:19 +10:00
Andrew Tridgell 6186b7a453 Plane: disable TRIM_RC_AT_START by default 2015-08-15 19:13:30 +10:00
Andrew Tridgell cc96f80f02 Plane: make TRAINING mode obey stall prevention roll limits
Fixes issue#2014
2015-08-14 13:36:21 +10:00
Andrew Tridgell ac2e1552b2 Plane: don't do battery failsafe when disarmed 2015-08-14 13:17:48 +10:00
Andrew Tridgell 58e829553f Plane: prevent build error with MSG_RPM 2015-08-12 15:03:52 +10:00
Andrew Tridgell f2c1010501 Plane: prevent mode switch changes changing WP tracking
this fixes a bug where a mode switch change during an AUTO mission
which does not change the flight mode would cause cross tracking to be
reset, so the plane will not correctly follow the desired track

Many thanks to Michael Du Breuil for the log that showed this bug
2015-08-12 14:42:49 +10:00
Gustavo Jose de Sousa 93c80b03ae ArduPlane: standardize inclusion of libaries headers
This commit changes the way libraries headers are included in source files:

 - If the header is in the same directory the source belongs to, so the
 notation '#include ""' is used with the path relative to the directory
 containing the source.

 - If the header is outside the directory containing the source, then we use
 the notation '#include <>' with the path relative to libraries folder.

Some of the advantages of such approach:

 - Only one search path for libraries headers.

 - OSs like Windows may have a better lookup time.
2015-08-11 16:28:40 +10:00
squilter c24ba83fb1 Plane: init vehicle capabilities 2015-08-05 16:08:49 +09:00
Przemek Lekston ca915d9928 Plane: fix "logging disabled" build. 2015-08-03 10:07:52 +10:00
Grant Morphett c87929e907 Plane: Fix landing to stop divide by zero if params are 0
If someone mistakenly puts all 0's in their LAND command then
total_distance will be calculated as 0 and cause a divide by 0 error
below thus crashing ArduPilot.  Lets avoid that.
2015-08-03 09:53:48 +10:00
Andrew Tridgell 1b13be4ad7 Plane: disable camera logging when camera support disabled 2015-07-30 12:17:48 +10:00
Andrew Tridgell 6e0057778b Plane: remove unused file 2015-07-30 11:14:39 +10:00
Andrew Tridgell 9f9080983b Plane: trim out some log msgs on APM2
save a bit more flash
2015-07-30 11:14:06 +10:00
Andrew Tridgell 49f7adcc80 Plane: re-enable geofencing on APM2
it only just fits ...
2015-07-30 11:04:31 +10:00
Andrew Tridgell 6c07795b63 Plane: added HIL_SUPPORT define
disable HIL support on APM2 to save flash space
2015-07-30 11:04:31 +10:00
Andrew Tridgell 8f0e7e0693 Plane: fixed above_location_current() for non-terrain alt
thanks to Lekston for finding the bug (PR#2610)
2015-07-29 08:20:23 +10:00
Andrew Tridgell 58fa38cc12 Plane: allow rudder disarm based on ARMING_RUDDER parameter 2015-07-23 21:48:50 +10:00
pepevalbe da41d85433 Plane: It is possible to disarm with left rudder.
Using is_flying() avoid accidentally disarming while flying.
2015-07-23 21:48:44 +10:00
Przemek Lekston 4b38d444dd Plane: fix default behaviour of flaps. 2015-07-23 15:28:08 +10:00
Przemek Lekston 6a62b11536 Plane: fix LOITER_TO_ALT to verify headings towards waypoints within the loiter radius.
Whenever next waypoint is within the loiter radius, maintaining loiter would prevent us from ever pointing toward the next waypoint. Hence for very close waypoints loiter_to_alt becomes verified by the altitude only.
2015-07-23 15:24:43 +10:00
Grant Morphett cc6a981b12 Plane: deleted the old command_description.txt file which isn't used. 2015-07-21 16:31:24 +09:00
Andrew Tridgell 51bdbea745 Plane: fixed format for ARM message 2015-07-20 09:46:19 +10:00
Randy Mackay b670988e05 Plane: log IMUDT 2015-07-14 13:31:56 +09:00
Andrew Tridgell 266857c595 Plane: avoid linking optflow on APM2
not used, just taking memory
2015-07-10 16:46:30 +10:00
Lucas De Marchi e97034f8e9 ArduPlane: use ARRAY_SIZE macro 2015-07-07 07:56:30 +10:00
Randy Mackay 76ccf4043e Plane: log ahrs home and ekf origin 2015-07-06 12:11:56 +09:00
Tom Pittenger f1ee129423 Plane: compiler warnings
- float to double in gcs_send_test (x2)
- float to bool
2015-07-06 09:30:19 +10:00
Andre Kjellstrup edc32092ce Plane: Do not run long_failsafe during final or landing. 2015-07-02 14:28:45 +10:00
Andre Kjellstrup 9d525d4382 Plane: Do not run FailSafe if on final approach or landing.
A failsafe (Circle, RTL) would easily become a disaster if trigged
during approach or final.
2015-07-02 14:28:45 +10:00
Andre Kjellstrup baf4989a80 Plane: Ignore low voltage failsafe during landing
Log it, but do not switch to RTL if already in final or landing.
2015-07-02 14:28:44 +10:00
Peter Barker 3fce7eb21a Plane: use common mission logging code 2015-06-30 16:23:35 +10:00
Peter Barker bbfe67fe2a Plane: use common system information logging 2015-06-30 16:23:34 +10:00
Peter Barker 7f0a0cf64f Plane: DataFlash frontend/backend split 2015-06-26 16:02:50 +10:00
Michael du Breuil 54c06cde02 Plane: Log the steering controller PID state 2015-06-22 15:41:44 +10:00
Michael du Breuil 1a121f543b Plane: Use PIDS for steering rather then PIDY 2015-06-22 15:41:44 +10:00
Andrew Tridgell 4aac2c5c96 Plane: trigger OVERRIDE_CHAN in px4io
setup the MODESWITCH channel as our OVERRIDE_CHAN, allowing for
instant manual passthru in px4io when OVERRIDE_CHAN goes above 1750

This makes for faster switching, and avoids bugs where a still enabled
FMU channel disables override
2015-06-21 18:19:16 +10:00
Andrew Tridgell 248bf8c5a3 Plane: disable geofence on APM2 2015-06-20 14:52:42 +10:00
Andrew Tridgell 2dbe372b2f Plane: cleanup some coverity warnings 2015-06-20 13:26:34 +10:00
Andrew Tridgell ae1f2e8bea Plane: fixed missing break statement 2015-06-20 12:35:07 +10:00
Andre Kjellstrup 19aa7caad0 GCS_Failsafe: option to trigger only in AUTO mode. 2015-06-18 07:52:43 +10:00
Andre Kjellstrup 39797529fd GCS_Failsafe: defines for new failsafe option 2015-06-18 07:52:42 +10:00
Andre Kjellstrup 3e84132f6b GCS_Failsafe: new parameter option 2015-06-18 07:52:42 +10:00
Andrew Tridgell 76c0293a85 Plane: added support for DO_AUTOTUNE_ENABLE 2015-06-15 09:20:55 +10:00
Andrew Tridgell d5c5400e76 Plane: added support for ALTITUDE_WAIT mission command 2015-06-15 09:20:55 +10:00
Andrew Tridgell 358a13261c Plane: moved sink_rate calculation to update_alt()
this makes it available to non-landing code
2015-06-15 09:20:55 +10:00
Randy Mackay 814cb5ce18 Plane: add vibration DF logging and send to GCS 2015-06-12 21:36:47 +09:00
Andrew Tridgell 3427224bfc Plane: fixed logging of parameters on arming 2015-06-12 13:11:06 +10:00
Eugene Shamaev 5b34fa4f6a Plane: added DSM bind support 2015-06-10 17:19:10 +10:00
Andrew Tridgell 6b9854457d Plane: added PID tuning logging for ground steering 2015-06-09 12:48:56 +10:00
Andrew Tridgell bc6a52f8db Plane: fixed handling of OVERRIDE_CHAN on arming
When arming we need to ensure that we don't enable any channels
otherwise PX4IO will think that FMU is active and will stop running
the internal RC mixer
2015-06-09 12:48:55 +10:00
Michael Oborne 7dcd24137e Plane: add bitmask documentation 2015-06-05 10:21:21 +09:00
Lucas De Marchi 6bbf0e7770 Plane: stop using alias FUNCTOR_BIND_VOID 2015-06-04 13:37:38 +09:00
Andrew Tridgell bf396d7138 Plane: log to tlog when we set home via MAVLink 2015-06-04 13:26:39 +10:00
Andrew Tridgell 5942bf5cf0 Plane: added plane specific arming checks
added check for roll and pitch limits, after flyaway due to small
LIM_ROLL_CD
2015-06-04 13:26:39 +10:00
Andrew Tridgell 47f4a5db10 Plane: try to load px4 mixer 10 times on boot
this allows for possible temporary failures
2015-06-02 21:59:03 +10:00
Andrew Tridgell 3e74b82bc4 Plane: fixed two bugs in px4io override code
First bug is going via microSD to poulate mixer. We can't rely on the
microSD being writeable or functioning properly. Instead create the
buffer in memory and only write a copy to the filesystem.

Second bug is related to extreme trim values on channels. If trim
values are well out of range then the mixer fails and override fails.
2015-06-02 21:48:18 +10:00
Randy Mackay 9ece826c28 Plane: Log_Write_Startup writes parameters 2015-06-01 20:22:50 +09:00
Grant Morphett 2c3cff7f84 Plane: Moving parameter logging to be after all systems have started 2015-06-01 20:22:40 +09:00
Andrew Tridgell db784c83dc Plane: removed unnecessary pragmas 2015-06-01 17:42:21 +10:00
Andrew Tridgell 9adc879253 Plane: changes for new AHRS API 2015-06-01 16:16:49 +10:00
Andrew Tridgell 1797e2baa8 Plane: simpler initalisation of plane class
take advantage of C++11 in-class initialisation
2015-06-01 08:48:54 +10:00
Andrew Tridgell 57544a3537 Plane: added blank Parameters.pde for MissionPlanner 2015-05-30 15:21:33 +09:00
Andrew Tridgell 1520d8f734 Plane: catch a px4_mixer failure case 2015-05-30 11:17:56 +10:00
Andrew Tridgell 9b77260ebb Plane: disable PID logging on APM2 2015-05-29 16:32:05 +10:00
Andrew Tridgell 2f5ade4810 Plane: use 16 bit mask for GCS_PID_MASK 2015-05-27 15:09:47 +10:00
Andrew Tridgell 09476bf9d3 Plane: added GCS_PID_MASK for realtime pid tuning 2015-05-27 14:28:46 +10:00
Andrew Tridgell c31da93726 Plane: log roll and pitch PIDs 2015-05-27 14:28:45 +10:00
Peter Barker d7ed06816a Plane: use 64-bit timestamps for dataflash logs 2015-05-27 11:54:15 +10:00
Andrew Tridgell 964b8ed2f3 Plane: fix for scheduler API change 2015-05-26 14:33:52 +10:00
Lucas De Marchi 7c4cf41ebc ArduPlane: use functor macros
Functor is not yet being used but let's make is macro fallback to the
previous Delegate implementation for easy of transition between the two.
2015-05-26 13:46:54 +10:00
Andrew Tridgell 97687f04af Plane: enable messages for MAVLink gimbal support 2015-05-26 08:30:30 +10:00
Andrew Tridgell 5511140f95 Plane: fixed fence return point on breach
this was broken by the recent guided mode changes. Thanks to Grant for
noticing!
2015-05-24 15:24:02 +10:00
Andrew Tridgell eee191875e Plane: fixed plane version, removing old pde 2015-05-22 16:07:43 +10:00
Andrew Tridgell 8974c879fe Plane: fixed paths for GCS_MAVLink parameter file 2015-05-21 11:42:45 +10:00
Andrew Tridgell 8359b75201 Plane: removed NOINLINE define 2015-05-21 09:35:55 +10:00
Andrew Tridgell 78f02634d0 Plane: fixed ins reference in plane object 2015-05-21 07:48:54 +10:00
Andrew Tridgell 441d96c946 Plane: fixed APM1 build 2015-05-21 07:48:53 +10:00
Andrew Tridgell 554869033f Plane: disabled rangefinder on APM2
this saves 5k of flash space, enough for support to be kept for
another release
2015-05-21 07:48:53 +10:00
Andrew Tridgell 6fe65cdd9a Plane: removed duplicate rangefinder 2015-05-21 07:48:53 +10:00
Andrew Tridgell b92c2409e4 Plane: added local millis() and micros() to reduce code size a bit 2015-05-21 07:48:53 +10:00
Andrew Tridgell 150af130ee Plane: get closer to making var_info appear in text segment 2015-05-21 07:48:52 +10:00
Andrew Tridgell 18c37935c9 Plane: convert from .pde to .cpp files 2015-05-21 07:48:52 +10:00
Andrew Tridgell f75e9f95d1 Plane: Adjust for new AP_Scheduler syntax 2015-05-21 07:48:48 +10:00
Andrew Tridgell 6be0932d82 Plane: prepare for 3.3.0 release 2015-05-20 18:01:21 +10:00
Andrew Tridgell db871cc581 Plane: prevent trim values out of range for PX4 mixer
thanks to Brian Christal for a good bug report!
2015-05-17 21:24:58 +10:00
Tom Pittenger b4be1b866a Copter: compiler warning stuff
float to double promotion via cos instead of cosf
2015-05-16 08:21:36 +10:00
Andrew Tridgell 9ceee3cea7 Plane: support setting just accel trim with preflight-cal
use param5==2
2015-05-16 07:56:35 +10:00
Randy Mackay 174c55b0af Plane: add support for 4th mavlink channel 2015-05-15 15:07:28 +09:00
Andrew Tridgell 2feee9aa88 Plane: call Log_Write_POS() 2015-05-15 14:28:15 +10:00