Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,905 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

4905 Commits

Author SHA1 Message Date
Amilcar Lucas 8f836b2fd6 ATmega1280 does not have enough memory for mount support so disable AUTO GPS support, to allow mount support to fit. 
This should almost have no side effects, because the most users use MTK anyways.
If the user defined a GPS protocol, than we will NOT overwrite it
 2012-08-04 16:32:20 +02:00
Michael Oborne 1692cedf42 Mission Planner 1.2.2 
add DegreeTracker
fix popout tab on config page
add remember last config tab
fix bytes send count
fix deactivate bug
fix ap_limits bug
fix ap_mount bug
 2012-08-02 18:04:54 +08:00
Michael Oborne 2e8c6151c3 firmware build 2012-08-01 15:24:39 +08:00
Andrew Tridgell 526344ab7c APM: added control switch debouncer 
this adds a switch debouncer, similar to the one used in
ArduCopter. I'm adding this after a flight on the weekend where noise
on the control mode channel caused a mode change away from auto.

To prevent this change adding excessive mode switch latency, it also
moves the reading of the control switch to the 10Hz loop, away from
the 3.3Hz loop. That gives us 0.2s delay in mode switch changes and
allows for spikes in the control mode for 0.1 seconds without changing
mode.
 2012-08-01 13:59:37 +10:00
rmackay9 64f027bf42 ArduCopter: bug fix to reset yaw target when zero and when in stabilize or acro mode. 2012-08-01 12:15:02 +09:00
rmackay9 95522fb8a3 ArduPlane: bug fix to global var_info parameter list for ahrs object. 2012-08-01 10:52:34 +09:00
rmackay9 b85986cb44 ArduCopter: bug fix to global var_info parameter list for ahrs object. 2012-08-01 10:52:27 +09:00
Andreas M. Antonopoulos 1ea2cb7b75 AP_Limits: experimental "bounce" mode. 2012-07-31 18:39:58 -07:00
Robert Lefebvre 54b320a9a0 Fixing Trad Heli Ext ESC Controller 
-Added ramp-down rate instead of instantly setting ramp to zero when throttle is dropped to bottom. This is to allow "warm-restart" if shutdown was unintentional.
-Actual ESC still goes to zero while throttle is dropped to the bottom, only the ramp counter winds down slowly behind the scenes.
 2012-07-31 17:47:25 -04:00
Andreas M. Antonopoulos 005b3d7f62 AC2.7.1: Updated version and tag 2012-07-31 13:11:17 -07:00
Andrew Tridgell 24ba59f528 APM: fixed overflow in geofence code for altitudes above 327 meters 2012-07-31 15:46:47 +10:00
Jason Short 4829e937ea ACM: Toy mode fix - Pitch flipped the sign on roll/Yaw coupling. 2012-07-30 15:43:05 -07:00
rmackay9 072c247911 ArduCopter: reduce stabilize roll, pitch and rate yaw IMAX values 2012-07-30 11:01:45 +09:00
Michael Oborne 529e1bcc71 Mission Planner 1.2.1 
add enable/disable to mavlinkcheckbox
modify my button to curved
add delay to progress reporter dialog. to ensure correct parent
Fix Mount screen for AP
Fix Hardware screen Text
display roi difrently
modify HIL/Quad Hil
update dataflashlog format (thanks randy)
update mavcmd format for roi
 2012-07-30 07:23:42 +08:00
Andrew Tridgell cc9712860b APM: fixed case of 'LAND_PITCH_CD' 
mavlink parameters are uppercase by convention
 2012-07-29 17:07:38 +10:00
Michael Oborne 2d6d74f625 AC remove attitude hil unused extra (gps jump issue.) 2012-07-29 08:18:41 +08:00
rmackay9 38ff381620 ArduCopter: reset target yaw when throttle is zero (except if failsafe has been triggered) 2012-07-28 23:05:05 +09:00
rmackay9 717d0d25d4 ArduPlane: allow MPU6000's DMP to be used for attitude estimation. 
Enable by adding this line to APM_Config.h:
#define DMP_ENABLED ENABLED
 2012-07-28 19:50:40 +09:00
rmackay9 23a1e33e20 AP_InertialSensor_MPU6000: another attempt at fixing the SITL build 2012-07-28 17:19:19 +09:00
rmackay9 06a4aaa763 AP_InertialSensor_MPU6000: changed DMP memory definition (dmpMem) to const uint8_t to remove SITL compile errors (hopefully) 
Removed unused 'dump' variable from dmp_load_mem to reduce compiler warnings
 2012-07-28 16:33:04 +09:00
rmackay9 a10ac65c11 ArduCopter: added DMP_ENABLED to APM_Config.h to make it easier for people to enable it. 2012-07-28 16:31:38 +09:00
rmackay9 9a558be53e AP_AHRS_MPU6000: cleaning up compiler warning due to unused yaw_deltat variable 2012-07-28 16:23:25 +09:00
rmackay9 07a8d0cc99 ArduCopter: fixed HIL build by removing ability to change _kp and _kp_yaw gains (used for accel and gyro sensor mixing) 2012-07-28 16:22:35 +09:00
rmackay9 ea4e56309d AP_InertialSensor_Oilpan: changed initialisation order of parameters to remove compiler warning 2012-07-28 15:22:37 +09:00
Michael Oborne f83ca8b296 AC remove some attitude HIL limitations 2012-07-28 13:59:30 +08:00
rmackay9 d9e92c0beb ArduPlane: change to Parameters.pde to support moving var_info from AP_AHRS to AP_AHRS_DCM 2012-07-28 14:31:01 +09:00
rmackay9 a49454e905 AP_AHRS: updated test sketch to allow use of MPU6000's DMP 2012-07-28 14:27:26 +09:00
rmackay9 0073f65ac6 ArduCopter: added ahrs.ini() to system.pde to allow offsets to be pushed into MPU6000's DMP 2012-07-28 14:21:45 +09:00
rmackay9 83ab9be0eb ArduCopter: added DMP_ENABLE #define and CH6 tuning value for AHRS_KP 2012-07-28 14:21:07 +09:00
rmackay9 38d974b63f ArduCopter: changes in arducopter to support moving AHRS var_info from AP_AHRS to AP_AHRS_DCM 2012-07-28 14:18:31 +09:00
rmackay9 0820ebddb9 AP_AHRS_MPU6000: first draft implementation of class that uses MPU6000's DMP to calculate attitude 2012-07-28 14:17:38 +09:00
rmackay9 5a9211c278 AP_AHRS: removed var_info from AP_AHRS class (moved to AP_AHRS_DCM) 2012-07-28 14:16:56 +09:00
rmackay9 c2b47d2bf9 AP_AHRS_DCM: moved var_info to belong to AP_AHRS_DCM instead of AP_AHRS 2012-07-28 14:16:15 +09:00
rmackay9 ae119b08b3 AP_IMU_INS: added gx(), gy() and gz() methods to return gyro offsets 2012-07-28 14:15:23 +09:00
rmackay9 dfea845c37 AP_InertialSensor: methods added to access DMP functionality 2012-07-28 14:14:43 +09:00
Michael Oborne eeac211b1d AP Fix Hil Airspeed calc in m/s 2012-07-26 20:21:17 +08:00
Michael Oborne 327426fd66 firmware build 2012-07-26 10:31:30 +08:00
Andrew Tridgell cfe19c8f53 APM: update version for 2.50 release 2012-07-26 11:36:17 +10:00
Andrew Tridgell 6243cf77a8 APM: added a SCALING_SPEED parameter 
this allows users to adjust the base speed used for scaling roll/pitch
PIDs. This can be used to make PIDs work for both airspeed and
non-airspeed control
 2012-07-26 11:30:23 +10:00
Andrew Tridgell caa16cbb54 APM: fixed HIL build 2012-07-26 10:09:07 +10:00
Andrew Tridgell efc184c3ad APM: fixed build 
the SET_ROI commands are not supported yet
 2012-07-26 10:03:36 +10:00
Andrew Tridgell e0b6ed12be MAVLink: rename the message_definitions directory 2012-07-26 10:03:36 +10:00
Andrew Tridgell b4fc025151 MAVLink: removed MAVLink 0.9 message definitions 
we are now 1.0 only
 2012-07-26 10:03:36 +10:00
Andrew Tridgell d4599aa4f0 APM: switch back to old nav_roll calculation 
the old nav_roll will be used for the 2.50 release to prevent the need
for re-tuning. For the release after that we will use the new
calculation
 2012-07-26 10:03:36 +10:00
Michael Oborne 11a56c4df1 Mission Planner 1.2 
Enable Mount config screen
Add Quick View (double click to change)
fix mono updater issue
RFD900 transmit values Mod
new mavlink controls (wip)
 2012-07-25 21:44:24 +08:00
rmackay9 5318da9e0e ArduCopter: add support for MAVLink's MAV_CMD_NAV_ROI command 
do_nav_roi and verify_nav_roi functions added to turn the copter and/or mount in response to a MAV_CMD_NAV_ROI way point
 2012-07-25 11:02:54 +09:00
rmackay9 960c2f08af AP_Mount: addition of Amilcar's mount_type 
set_roi_cmd modified to take a Location.  I know the intention was for set_roi_cmd to interpret the MAVLink command directly but unfortunately in arduCopter missions are only made up of waypoints (which are Locations).
 2012-07-25 11:00:38 +09:00
Michael Oborne 5beb60b93e firmware build 2012-07-25 02:38:53 +08:00
Michael Oborne 78b94f39ae AC fix sitl attitude hil build 2012-07-24 21:18:36 +08:00
wiseman a36a9e86b9 Use MAVPROXY_CMD instead of MAVPROXY 2012-07-23 21:30:50 -07:00